34d2cde8a8
1. Add new config CONFIG_NET_LL_GUARDSIZE to isolation of l2 stack, which will benefit l3(IP) layer for multi-MAC(l2) implementation, especially in some NICs such as celluler net driver. new configuration options: CONFIG_NET_LL_GUARDSIZE CONFIG_NET_LL_GUARDSIZE will reserved l2 buffer header size of network buffer to isolate the L2/L3 (MAC/IP) data on network layer, which will be beneficial to L3 network layer protocol transparent transmission and forwarding ------------------------------------------------------------ Layout of frist iob entry: iob_data (aligned by CONFIG_IOB_ALIGNMENT) | | io_offset(CONFIG_NET_LL_GUARDSIZE) | | ------------------------------------------------- iob | Reserved | io_len | ------------------------------------------------- ------------------------------------------------------------- Layout of different NICs implementation: iob_data (aligned by CONFIG_IOB_ALIGNMENT) | | io_offset(CONFIG_NET_LL_GUARDSIZE) | | ------------------------------------------------- Ethernet | Reserved | ETH_HDRLEN | io_len | ---------------------------------|--------------- 8021Q | Reserved | ETH_8021Q_HDRLEN | io_len | ---------------------------------|--------------- ipforward | Reserved | io_len | ------------------------------------------------- -------------------------------------------------------------------- 2. Support iob offload to l2 driver to avoid unnecessary memory copy Support send/receive iob vectors directly between the NICs and l3/l4 stack to avoid unnecessary memory copies, especially on hardware that supports Scatter/gather, which can greatly improve performance. new interface to support iob offload: ------------------------------------------ | IOB version | original | |----------------------------------------| | devif_iob_poll() | devif_poll() | | ... | ... | ------------------------------------------ -------------------------------------------------------------------- 1> NIC hardware support Scatter/gather transfer TX: tcp_poll()/udp_poll()/pkt_poll()/...(l3|l4) / \ / \ devif_poll_[l3|l4]_connections() devif_iob_send() (nocopy:udp/icmp/...) / \ (copy:tcp) / \ devif_iob_poll("NIC"_txpoll) callback() // "NIC"_txpoll | dev->d_iob: | --------------- --------------- io_data iob1 | | | iob3 | | | \ --------------- --------------- --------------- | --------------- | iob0 | | | | iob2 | | | | --------------- | --------------- | \ | / / \ | / / ---------------------------------------------- NICs io vector | | | | | | | | | | ---------------------------------------------- RX: [tcp|udp|icmp|...]ipv[4|6]_data_handler()(iob_concat/append to readahead) | | [tcp|udp|icmp|...]_ipv[4|6]_in()/... | | pkt/ipv[4/6]_input()/... | | NICs io vector receive(iov_base to each iobs) -------------------------------------------------------------------- 2> CONFIG_IOB_BUFSIZE is greater than MTU: TX: "(CONFIG_IOB_BUFSIZE) > (MAX_NETDEV_PKTSIZE + CONFIG_NET_GUARDSIZE + CONFIG_NET_LL_GUARDSIZE)" tcp_poll()/udp_poll()/pkt_poll()/...(l3|l4) / \ / \ devif_poll_[l3|l4]_connections() devif_iob_send() (nocopy:udp/icmp/...) / \ (copy:tcp) / \ devif_iob_poll("NIC"_txpoll) callback() // "NIC"_txpoll | "NIC"_send() (dev->d_iob->io_data[CONFIG_NET_LL_GUARDSIZE - NET_LL_HDRLEN(dev)]) RX: [tcp|udp|icmp|...]ipv[4|6]_data_handler()(iob_concat/append to readahead) | | [tcp|udp|icmp|...]_ipv[4|6]_in()/... | | pkt/ipv[4/6]_input()/... | | NICs io vector receive(iov_base to io_data) -------------------------------------------------------------------- 3> Compatible with all old flat buffer NICs TX: tcp_poll()/udp_poll()/pkt_poll()/...(l3|l4) / \ / \ devif_poll_[l3|l4]_connections() devif_iob_send() (nocopy:udp/icmp/...) / \ (copy:tcp) / \ devif_iob_poll(devif_poll_callback()) devif_poll_callback() /* new interface, gather iobs to flat buffer */ / \ / \ devif_poll("NIC"_txpoll) "NIC"_send()(dev->d_buf) RX: [tcp|udp|icmp|...]ipv[4|6]_data_handler()(iob_concat/append to readahead) | | [tcp|udp|icmp|...]_ipv[4|6]_in()/... | | netdev_input() /* new interface, Scatter/gather flat/iob buffer */ | | pkt/ipv[4|6]_input()/... | | NICs io vector receive(Orignal flat buffer) 3. Iperf passthrough on NuttX simulator: ------------------------------------------------- | Protocol | Server | Client | | |-----------------------------------------------| | TCP | 813 | 834 | Mbits/sec | | TCP(Offload) | 1720 | 1100 | Mbits/sec | | UDP | 22 | 757 | Mbits/sec | | UDP(Offload) | 25 | 1250 | Mbits/sec | ------------------------------------------------- Signed-off-by: chao an <anchao@xiaomi.com>
345 lines
11 KiB
C
345 lines
11 KiB
C
/****************************************************************************
|
|
* net/utils/utils.h
|
|
*
|
|
* Licensed to the Apache Software Foundation (ASF) under one or more
|
|
* contributor license agreements. See the NOTICE file distributed with
|
|
* this work for additional information regarding copyright ownership. The
|
|
* ASF licenses this file to you under the Apache License, Version 2.0 (the
|
|
* "License"); you may not use this file except in compliance with the
|
|
* License. You may obtain a copy of the License at
|
|
*
|
|
* http://www.apache.org/licenses/LICENSE-2.0
|
|
*
|
|
* Unless required by applicable law or agreed to in writing, software
|
|
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
|
|
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
|
|
* License for the specific language governing permissions and limitations
|
|
* under the License.
|
|
*
|
|
****************************************************************************/
|
|
|
|
#ifndef __NET_UTILS_UTILS_H
|
|
#define __NET_UTILS_UTILS_H
|
|
|
|
/****************************************************************************
|
|
* Included Files
|
|
****************************************************************************/
|
|
|
|
#include <nuttx/config.h>
|
|
#include <nuttx/net/net.h>
|
|
#include <nuttx/net/ip.h>
|
|
#include <nuttx/net/netdev.h>
|
|
|
|
/****************************************************************************
|
|
* Public Types
|
|
****************************************************************************/
|
|
|
|
/* These values control the behavior of net_timeval2desc */
|
|
|
|
enum tv2ds_remainder_e
|
|
{
|
|
TV2DS_TRUNC = 0, /* Truncate microsecond remainder */
|
|
TV2DS_ROUND, /* Round to the nearest full decisecond */
|
|
TV2DS_CEIL /* Force to next larger full decisecond */
|
|
};
|
|
|
|
/****************************************************************************
|
|
* Public Data
|
|
****************************************************************************/
|
|
|
|
#ifdef __cplusplus
|
|
#define EXTERN extern "C"
|
|
extern "C"
|
|
{
|
|
#else
|
|
#define EXTERN extern
|
|
#endif
|
|
|
|
/****************************************************************************
|
|
* Public Function Prototypes
|
|
****************************************************************************/
|
|
|
|
struct net_driver_s; /* Forward reference */
|
|
struct timeval; /* Forward reference */
|
|
|
|
/****************************************************************************
|
|
* Name: net_breaklock
|
|
*
|
|
* Description:
|
|
* Break the lock, return information needed to restore re-entrant lock
|
|
* state.
|
|
*
|
|
****************************************************************************/
|
|
|
|
int net_breaklock(FAR unsigned int *count);
|
|
|
|
/****************************************************************************
|
|
* Name: net_restorelock
|
|
*
|
|
* Description:
|
|
* Restore the locked state
|
|
*
|
|
* Returned Value:
|
|
* Zero (OK) is returned on success; a negated errno value is returned on
|
|
* failured (probably -ECANCELED).
|
|
*
|
|
****************************************************************************/
|
|
|
|
int net_restorelock(unsigned int count);
|
|
|
|
/****************************************************************************
|
|
* Name: net_dsec2timeval
|
|
*
|
|
* Description:
|
|
* Convert a decisecond value to a struct timeval. Needed by getsockopt()
|
|
* to report timeout values.
|
|
*
|
|
* Input Parameters:
|
|
* dsec The decisecond value to convert
|
|
* tv The struct timeval to receive the converted value
|
|
*
|
|
* Returned Value:
|
|
* None
|
|
*
|
|
* Assumptions:
|
|
*
|
|
****************************************************************************/
|
|
|
|
void net_dsec2timeval(uint16_t dsec, FAR struct timeval *tv);
|
|
|
|
/****************************************************************************
|
|
* Name: net_dsec2tick
|
|
*
|
|
* Description:
|
|
* Convert a decisecond value to a system clock ticks. Used by IGMP logic.
|
|
*
|
|
* Input Parameters:
|
|
* dsec The decisecond value to convert
|
|
*
|
|
* Returned Value:
|
|
* The decisecond value expressed as system clock ticks
|
|
*
|
|
****************************************************************************/
|
|
|
|
unsigned int net_dsec2tick(int dsec);
|
|
|
|
/****************************************************************************
|
|
* Name: net_timeval2dsec
|
|
*
|
|
* Description:
|
|
* Convert a struct timeval to deciseconds. Needed by setsockopt() to
|
|
* save new timeout values.
|
|
*
|
|
* Input Parameters:
|
|
* tv - The struct timeval to convert
|
|
* remainder - Determines how to handler the microsecond remainder
|
|
*
|
|
* Returned Value:
|
|
* The converted value
|
|
*
|
|
* Assumptions:
|
|
*
|
|
****************************************************************************/
|
|
|
|
unsigned int net_timeval2dsec(FAR struct timeval *tv,
|
|
enum tv2ds_remainder_e remainder);
|
|
|
|
/****************************************************************************
|
|
* Name: net_ipv6_mask2pref
|
|
*
|
|
* Description:
|
|
* Convert a 128-bit netmask to a prefix length. The NuttX IPv6
|
|
* networking uses 128-bit network masks internally. This function
|
|
* converts the IPv6 netmask to a prefix length.
|
|
*
|
|
* The prefix length is the number of MS '1' bits on in the netmask.
|
|
* This, of course, assumes that all MS bits are '1' and all LS bits are
|
|
* '0' with no intermixed 1's and 0's. This function searches from the MS
|
|
* bit until the first '0' is found (this does not necessary mean that
|
|
* there might not be additional '1' bits following the firs '0', but that
|
|
* will be a malformed netmask.
|
|
*
|
|
* Input Parameters:
|
|
* mask Points to an IPv6 netmask in the form of uint16_t[8]
|
|
*
|
|
* Returned Value:
|
|
* The prefix length, range 0-128 on success; This function will not
|
|
* fail.
|
|
*
|
|
****************************************************************************/
|
|
|
|
#ifdef CONFIG_NET_IPv6
|
|
uint8_t net_ipv6_mask2pref(FAR const uint16_t *mask);
|
|
#endif
|
|
|
|
/****************************************************************************
|
|
* Name: net_ipv6_pref2mask
|
|
*
|
|
* Description:
|
|
* Convert a IPv6 prefix length to a network mask. The prefix length
|
|
* specifies the number of MS bits under mask (0-128)
|
|
*
|
|
* Input Parameters:
|
|
* preflen - Determines the width of the netmask (in bits). Range 0-128
|
|
* mask - The location to return the netmask.
|
|
*
|
|
* Returned Value:
|
|
* None
|
|
*
|
|
****************************************************************************/
|
|
|
|
#ifdef CONFIG_NET_IPv6
|
|
void net_ipv6_pref2mask(uint8_t preflen, net_ipv6addr_t mask);
|
|
#endif
|
|
|
|
/****************************************************************************
|
|
* Name: net_chksum_adjust
|
|
*
|
|
* Description:
|
|
* Adjusts the checksum of a packet without having to completely
|
|
* recalculate it, as described in RFC 3022, Section 4.2, Page 9.
|
|
*
|
|
* Input Parameters:
|
|
* chksum - points to the chksum in the packet
|
|
* optr - points to the old data in the packet
|
|
* olen - length of old data
|
|
* nptr - points to the new data in the packet
|
|
* nlen - length of new data
|
|
*
|
|
* Limitations:
|
|
* The algorithm is applicable only for even offsets and even lengths.
|
|
*
|
|
****************************************************************************/
|
|
|
|
void net_chksum_adjust(FAR uint16_t *chksum,
|
|
FAR const uint16_t *optr, ssize_t olen,
|
|
FAR const uint16_t *nptr, ssize_t nlen);
|
|
|
|
/****************************************************************************
|
|
* Name: tcp_chksum, tcp_ipv4_chksum, and tcp_ipv6_chksum
|
|
*
|
|
* Description:
|
|
* Calculate the TCP checksum of the packet in d_buf and d_appdata.
|
|
*
|
|
* The TCP checksum is the Internet checksum of data contents of the
|
|
* TCP segment, and a pseudo-header as defined in RFC793.
|
|
*
|
|
* Note: The d_appdata pointer that points to the packet data may
|
|
* point anywhere in memory, so it is not possible to simply calculate
|
|
* the Internet checksum of the contents of the d_buf buffer.
|
|
*
|
|
* Returned Value:
|
|
* The TCP checksum of the TCP segment in d_buf and pointed to by
|
|
* d_appdata.
|
|
*
|
|
****************************************************************************/
|
|
|
|
#ifdef CONFIG_NET_IPv4
|
|
uint16_t tcp_ipv4_chksum(FAR struct net_driver_s *dev);
|
|
#endif
|
|
|
|
#ifdef CONFIG_NET_IPv6
|
|
uint16_t tcp_ipv6_chksum(FAR struct net_driver_s *dev);
|
|
#endif
|
|
|
|
#if defined(CONFIG_NET_IPv4) && defined(CONFIG_NET_IPv6)
|
|
uint16_t tcp_chksum(FAR struct net_driver_s *dev);
|
|
#elif defined(CONFIG_NET_IPv4)
|
|
# define tcp_chksum(d) tcp_ipv4_chksum(d)
|
|
#else /* if defined(CONFIG_NET_IPv6) */
|
|
# define tcp_chksum(d) tcp_ipv6_chksum(d)
|
|
#endif
|
|
|
|
/****************************************************************************
|
|
* Name: udp_ipv4_chksum
|
|
*
|
|
* Description:
|
|
* Calculate the UDP/IPv4 checksum of the packet in d_buf and d_appdata.
|
|
*
|
|
****************************************************************************/
|
|
|
|
#if defined(CONFIG_NET_UDP_CHECKSUMS) && defined(CONFIG_NET_IPv4)
|
|
uint16_t udp_ipv4_chksum(FAR struct net_driver_s *dev);
|
|
#endif
|
|
|
|
/****************************************************************************
|
|
* Name: udp_ipv6_chksum
|
|
*
|
|
* Description:
|
|
* Calculate the UDP/IPv6 checksum of the packet in d_buf and d_appdata.
|
|
*
|
|
****************************************************************************/
|
|
|
|
#if defined(CONFIG_NET_UDP_CHECKSUMS) && defined(CONFIG_NET_IPv6)
|
|
uint16_t udp_ipv6_chksum(FAR struct net_driver_s *dev);
|
|
#endif
|
|
|
|
/****************************************************************************
|
|
* Name: icmp_chksum
|
|
*
|
|
* Description:
|
|
* Calculate the checksum of the IPv4 ICMP message
|
|
*
|
|
****************************************************************************/
|
|
|
|
#ifdef CONFIG_NET_ICMP
|
|
uint16_t icmp_chksum(FAR struct net_driver_s *dev, int len);
|
|
#endif
|
|
|
|
/****************************************************************************
|
|
* Name: icmp_chksum_iob
|
|
*
|
|
* Description:
|
|
* Calculate the checksum of the ICMP message, the input can be an I/O
|
|
* buffer chain
|
|
*
|
|
****************************************************************************/
|
|
|
|
#if defined(CONFIG_NET_ICMP) && defined(CONFIG_MM_IOB)
|
|
uint16_t icmp_chksum_iob(FAR struct iob_s *iob);
|
|
#endif /* CONFIG_NET_ICMP && CONFIG_MM_IOB */
|
|
|
|
/****************************************************************************
|
|
* Name: icmpv6_chksum
|
|
*
|
|
* Description:
|
|
* Calculate the checksum of the ICMPv6 message
|
|
*
|
|
****************************************************************************/
|
|
|
|
#ifdef CONFIG_NET_ICMPv6
|
|
uint16_t icmpv6_chksum(FAR struct net_driver_s *dev, unsigned int iplen);
|
|
#endif
|
|
|
|
/****************************************************************************
|
|
* Name: net_bound_device
|
|
*
|
|
* Description:
|
|
* If the socket is bound to a device, return the reference to the
|
|
* bound device.
|
|
*
|
|
* Input Parameters:
|
|
* sconn - Socket connection structure (not currently used).
|
|
*
|
|
* Returned Value:
|
|
* A reference to the bound device. If the retained interface index no
|
|
* longer refers to a valid device, this function will unbind the device
|
|
* and return an arbitrary network device at the head of the list of
|
|
* registered devices. This supports legacy IPv4 DHCPD behavior when
|
|
* there is only a single registered network device.
|
|
*
|
|
****************************************************************************/
|
|
|
|
#ifdef CONFIG_NET_BINDTODEVICE
|
|
FAR struct net_driver_s *net_bound_device(FAR struct socket_conn_s *sconn);
|
|
#else
|
|
# define net_bound_device(c) netdev_default();
|
|
#endif
|
|
|
|
#undef EXTERN
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
|
|
#endif /* __NET_UTILS_UTILS_H */
|