nuttx/boards/arm64/a64/pinephone/include/board.h
Lee Lup Yuen c2d75c930b arm64/a64: Add drivers for PIO and LEDs
This PR adds the drivers for Allwinner A64 PIO (Programmable I/O) and PinePhone LEDs (Red / Green / Blue).

The PIO Driver is based on the NuttX PIO Driver for Allwinner A10: [`arch/arm/src/a1x/a1x_pio.c`](https://github.com/apache/nuttx/blob/master/arch/arm/src/a1x/a1x_pio.c)

-   `arch/arm64/src/a64/Make.defs`: Add PIO Driver to Makefile

-   `boards/Kconfig`: Add `ARCH_HAVE_LEDS` to PinePhone

-   `boards/arm64/a64/pinephone/src/pinephone.h`: Define PinePhone LEDs

-   `boards/arm64/a64/pinephone/src/pinephone_boardinit.c`: Start Auto LEDs

-   `boards/arm64/a64/pinephone/src/pinephone_bringup.c`: Start User LEDs

-   `boards/arm64/a64/pinephone/src/Makefile`: Add LED Driver to Makefile

-   `boards/arm64/a64/pinephone/configs/nsh/defconfig`: Add `CONFIG_USERLED` to `nsh` config

-   `arch/arm64/src/a64/a64_pio.c`, `a64_pio.h`: Allwinner A64 PIO Driver

-   `arch/arm64/src/a64/hardware/a64_memorymap.h`: PIO Memory Map

-   `arch/arm64/src/a64/hardware/a64_pio.h`: PIO Definitions

-   `boards/arm64/a64/pinephone/include/board.h`: Define PinePhone LEDs

-   `boards/arm64/a64/pinephone/src/pinephone_autoleds.c`: Driver for Auto LEDs

-   `boards/arm64/a64/pinephone/src/pinephone_userleds.c`: Driver for User LEDs

-   `introduction/supported_platforms.rst`: Add Allwinner A64 as Supported Platform

-   `platforms/arm/a64/boards/pinephone/index.rst`: Add PIO and LEDs to PinePhone
2022-12-06 18:14:39 +08:00

72 lines
3.1 KiB
C

/****************************************************************************
* boards/arm64/a64/pinephone/include/board.h
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership. The
* ASF licenses this file to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance with the
* License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations
* under the License.
*
****************************************************************************/
#ifndef __BOARDS_ARM64_A64_PINEPHONE_INCLUDE_BOARD_H
#define __BOARDS_ARM64_A64_PINEPHONE_INCLUDE_BOARD_H
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
/* LED definitions **********************************************************/
/* LED index values for use with board_userled() */
typedef enum
{
BOARD_LED1 = 0, /* Green LED */
BOARD_LED2 = 1, /* Red LED */
BOARD_LED3 = 2, /* Blue LED */
BOARD_LEDS /* Number of LEDs */
} led_typedef_enum;
/* LED bits for use with board_userled_all() */
#define BOARD_LED1_BIT (1 << BOARD_LED1)
#define BOARD_LED2_BIT (1 << BOARD_LED2)
#define BOARD_LED3_BIT (1 << BOARD_LED3)
/* If CONFIG_ARCH_LEDS is defined, the usage by the board port is defined in
* include/board.h and src/pinephone_autoleds.c. The LEDs are used to encode
* OS-related events as follows:
*
* SYMBOL Meaning LED state
* LED1 LED2 LED3
* ---------------------- -------------------------- ------ ------ ---
*/
#define LED_STARTED 0 /* NuttX has been started OFF OFF OFF */
#define LED_HEAPALLOCATE 1 /* Heap has been allocated ON OFF OFF */
#define LED_IRQSENABLED 2 /* Interrupts enabled OFF ON OFF */
#define LED_STACKCREATED 3 /* Idle stack created OFF OFF ON */
#define LED_INIRQ 4 /* In an interrupt ON ON OFF */
#define LED_SIGNAL 5 /* In a signal handler ON OFF ON */
#define LED_ASSERTION 6 /* An assertion failed OFF ON ON */
#define LED_PANIC 7 /* The system has crashed FLASH ON ON */
#define LED_IDLE 8 /* MCU is is sleep mode OFF FLASH OFF */
#endif /* __BOARDS_ARM64_A64_PINEPHONE_INCLUDE_BOARD_H */