sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
884be2bdb9
nuttx/drivers/mtd/gd25.c
Xiang Xiao 9f027208d4 fs: Add model field to geometry and mtd_geometry_s 
the model is very useful to track the device info

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2023-01-31 11:50:28 -03:00

1078 lines
32 KiB
C
Raw Blame History

/***************************************************************************
* drivers/mtd/gd25.c
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership. The
* ASF licenses this file to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance with the
* License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations
* under the License.
*
***************************************************************************/
/***************************************************************************
* Included Files
***************************************************************************/
#include <nuttx/config.h>
#include <sys/types.h>
#include <inttypes.h>
#include <stdbool.h>
#include <stdlib.h>
#include <unistd.h>
#include <string.h>
#include <assert.h>
#include <errno.h>
#include <debug.h>
#include <nuttx/kmalloc.h>
#include <nuttx/signal.h>
#include <nuttx/fs/ioctl.h>
#include <nuttx/spi/spi.h>
#include <nuttx/mtd/mtd.h>
/***************************************************************************
* Configuration
***************************************************************************/
#ifndef CONFIG_GD25_SPIMODE
# define CONFIG_GD25_SPIMODE SPIDEV_MODE0
#endif
#ifndef CONFIG_GD25_SPIFREQUENCY
# define CONFIG_GD25_SPIFREQUENCY 20000000
#endif
/***************************************************************************
* GD25 Instructions
***************************************************************************/
/* Command Value Description */
#define GD25_WREN 0x06 /* Write enable */
#define GD25_WRDI 0x04 /* Write Disable */
#define GD25_RDSR 0x05 /* Read status register */
#define GD25_RDSR1 0x35 /* Read status register-1 */
#define GD25_WRSR 0x01 /* Write Status Register */
#define GD25_RDDATA 0x03 /* Read data bytes */
#define GD25_FRD 0x0b /* Higher speed read */
#define GD25_FRDD 0x3b /* Fast read, dual output */
#define GD25_PP 0x02 /* Program page */
#define GD25_SE 0x20 /* Sector erase (4KB) */
#define GD25_BE 0xd8 /* Block Erase (64KB) */
#define GD25_CE 0xc7 /* Chip erase */
#define GD25_PD 0xb9 /* Power down */
#define GD25_PURDID 0xab /* Release PD, Device ID */
#define GD25_RDMFID 0x90 /* Read Manufacturer / Device */
#define GD25_JEDEC_ID 0x9f /* JEDEC ID read */
#define GD25_4BEN 0xb7 /* Enable 4-byte Mode */
/***************************************************************************
* GD25 Registers
***************************************************************************/
/* JEDEC Read ID register values */
#define P25_JEDEC_MANUFACTURER 0x85
#define GD25_JEDEC_MANUFACTURER 0xc8 /* GigaDevice manufacturer ID */
#define GD25L_JEDEC_MEMORY_TYPE 0x60 /* GD25L memory type, 1.8V */
#define GD25Q_JEDEC_MEMORY_TYPE 0x40 /* GD25Q memory type, 3V */
#define GD25_JEDEC_CAPACITY_8MBIT 0x14 /* 256x4096 = 8Mbit memory capacity */
#define GD25_JEDEC_CAPACITY_16MBIT 0x15 /* 512x4096 = 16Mbit memory capacity */
#define GD25_JEDEC_CAPACITY_32MBIT 0x16 /* 1024x4096 = 32Mbit memory capacity */
#define GD25_JEDEC_CAPACITY_64MBIT 0x17 /* 2048x4096 = 64Mbit memory capacity */
#define GD25_JEDEC_CAPACITY_128MBIT 0x18 /* 4096x4096 = 128Mbit memory capacity */
#define GD25_JEDEC_CAPACITY_256MBIT 0x19 /* 8192x4096 = 256Mbit memory capacity */
#define GD25_NSECTORS_8MBIT 256 /* 256 sectors x 4096 bytes/sector = 1Mb */
#define GD25_NSECTORS_16MBIT 512 /* 512 sectors x 4096 bytes/sector = 2Mb */
#define GD25_NSECTORS_32MBIT 1024 /* 1024 sectors x 4096 bytes/sector = 4Mb */
#define GD25_NSECTORS_64MBIT 2048 /* 2048 sectors x 4096 bytes/sector = 8Mb */
#define GD25_NSECTORS_128MBIT 4096 /* 4096 sectors x 4096 bytes/sector = 16Mb */
#define GD25_NSECTORS_256MBIT 8192 /* 8192 sectors x 4096 bytes/sector = 32Mb */
/* Status register bit definitions */
#define GD25_SR_WIP (1 << 0) /* Bit 0: Write in Progress */
#define GD25_SR_WEL (1 << 1) /* Bit 1: Write Enable Latch */
#define GD25_SR1_EN4B (1 << 3) /* Bit 3: Enable 4byte address */
#define GD25Q_SR1_EN4B (1 << 0) /* Bit 0: Enable 4byte address GD25Q memories */
#define GD25_DUMMY 0x00
/***************************************************************************
* Chip Geometries
***************************************************************************/
/* All members of the family support uniform 4KB sectors and 256B pages */
#define GD25_SECTOR_SHIFT 12 /* Sector size 1 << 12 = 4Kb */
#define GD25_SECTOR_SIZE (1 << 12) /* Sector size 1 << 12 = 4Kb */
#define GD25_PAGE_SHIFT 8 /* Sector size 1 << 8 = 256b */
#define GD25_PAGE_SIZE (1 << 8) /* Sector size 1 << 8 = 256b */
#define GD25_ERASED_STATE 0xff /* State of FLASH when erased */
/***************************************************************************
* Private Types
***************************************************************************/
/* This type represents the state of the MTD device. The struct mtd_dev_s
* must appear at the beginning of the definition so that you can freely
* cast between pointers to struct mtd_dev_s and struct gd25_dev_s.
*/
struct gd25_dev_s
{
struct mtd_dev_s mtd; /* MTD interface */
FAR struct spi_dev_s *spi; /* Saved SPI interface instance */
uint32_t spi_devid; /* Chip select inputs */
uint16_t nsectors; /* Number of erase sectors */
uint8_t prev_instr; /* Previous instruction given to GD25 device */
bool addr_4byte; /* True: Use Four-byte address */
uint8_t memory; /* memory type read from device */
};
/***************************************************************************
* Private Function Prototypes
***************************************************************************/
/* Helpers */
static inline void gd25_purdid(FAR struct gd25_dev_s *priv);
static inline void gd25_pd(FAR struct gd25_dev_s *priv);
static void gd25_lock(FAR struct spi_dev_s *spi);
static inline void gd25_unlock(FAR struct spi_dev_s *spi);
static inline int gd25_readid(FAR struct gd25_dev_s *priv);
#ifndef CONFIG_GD25_READONLY
static void gd25_unprotect(FAR struct gd25_dev_s *priv);
#endif
static uint8_t gd25_waitwritecomplete(FAR struct gd25_dev_s *priv);
static inline void gd25_wren(FAR struct gd25_dev_s *priv);
static inline void gd25_wrdi(FAR struct gd25_dev_s *priv);
static bool gd25_is_erased(FAR struct gd25_dev_s *priv, off_t address,
off_t size);
static void gd25_sectorerase(FAR struct gd25_dev_s *priv, off_t offset);
static inline int gd25_chiperase(FAR struct gd25_dev_s *priv);
static void gd25_byteread(FAR struct gd25_dev_s *priv, FAR uint8_t *buffer,
off_t address, size_t nbytes);
#ifndef CONFIG_GD25_READONLY
static void gd25_pagewrite(FAR struct gd25_dev_s *priv,
FAR const uint8_t *buffer, off_t address, size_t nbytes);
#endif
static inline uint8_t gd25_rdsr(FAR struct gd25_dev_s *priv, uint32_t id);
static inline bool gd25_4ben(FAR struct gd25_dev_s *priv);
/* MTD driver methods */
static int gd25_erase(FAR struct mtd_dev_s *dev, off_t startblock,
size_t nblocks);
static ssize_t gd25_bread(FAR struct mtd_dev_s *dev, off_t startblock,
size_t nblocks, FAR uint8_t *buf);
static ssize_t gd25_bwrite(FAR struct mtd_dev_s *dev, off_t startblock,
size_t nblocks, FAR const uint8_t *buf);
static ssize_t gd25_read(FAR struct mtd_dev_s *dev, off_t offset,
size_t nbytes, FAR uint8_t *buffer);
static int gd25_ioctl(FAR struct mtd_dev_s *dev, int cmd,
unsigned long arg);
#ifdef CONFIG_MTD_BYTE_WRITE
static ssize_t gd25_write(FAR struct mtd_dev_s *dev, off_t offset,
size_t nbytes, FAR const uint8_t *buffer);
#endif
/***************************************************************************
* Private Functions
***************************************************************************/
/***************************************************************************
* Name: gd25_purdid
***************************************************************************/
static inline void gd25_purdid(FAR struct gd25_dev_s *priv)
{
SPI_SELECT(priv->spi, SPIDEV_FLASH(priv->spi_devid), true);
SPI_SEND(priv->spi, GD25_PURDID);
SPI_SELECT(priv->spi, SPIDEV_FLASH(priv->spi_devid), false);
up_udelay(20);
}
/***************************************************************************
* Name: gd25_pd
***************************************************************************/
static inline void gd25_pd(FAR struct gd25_dev_s *priv)
{
SPI_SELECT(priv->spi, SPIDEV_FLASH(priv->spi_devid), true);
SPI_SEND(priv->spi, GD25_PD);
SPI_SELECT(priv->spi, SPIDEV_FLASH(priv->spi_devid), false);
}
/***************************************************************************
* Name: gd25_lock
***************************************************************************/
static void gd25_lock(FAR struct spi_dev_s *spi)
{
SPI_LOCK(spi, true);
SPI_SETMODE(spi, CONFIG_GD25_SPIMODE);
SPI_SETBITS(spi, 8);
SPI_HWFEATURES(spi, 0);
SPI_SETFREQUENCY(spi, CONFIG_GD25_SPIFREQUENCY);
}
/***************************************************************************
* Name: gd25_unlock
***************************************************************************/
static inline void gd25_unlock(FAR struct spi_dev_s *spi)
{
SPI_LOCK(spi, false);
}
/***************************************************************************
* Name: gd25_readid
***************************************************************************/
static inline int gd25_readid(FAR struct gd25_dev_s *priv)
{
uint16_t manufacturer;
uint16_t memory;
uint16_t capacity;
int ret = -ENODEV;
/* Lock and configure the SPI bus */
gd25_lock(priv->spi);
gd25_purdid(priv);
/* Select this FLASH part. */
SPI_SELECT(priv->spi, SPIDEV_FLASH(priv->spi_devid), true);
/* Send the "Read ID (RDID)" command and read the first three ID bytes */
SPI_SEND(priv->spi, GD25_JEDEC_ID);
manufacturer = SPI_SEND(priv->spi, GD25_DUMMY);
memory = SPI_SEND(priv->spi, GD25_DUMMY);
capacity = SPI_SEND(priv->spi, GD25_DUMMY);
/* Deselect the FLASH and unlock the bus */
SPI_SELECT(priv->spi, SPIDEV_FLASH(priv->spi_devid), false);
finfo("manufacturer: %02x memory: %02x capacity: %02x\n",
manufacturer, memory, capacity);
/* Check for a valid manufacturer and memory type */
if ((manufacturer == GD25_JEDEC_MANUFACTURER ||
manufacturer == P25_JEDEC_MANUFACTURER) &&
(memory == GD25L_JEDEC_MEMORY_TYPE ||
memory == GD25Q_JEDEC_MEMORY_TYPE))
{
if (capacity == GD25_JEDEC_CAPACITY_8MBIT)
{
priv->nsectors = GD25_NSECTORS_8MBIT;
}
else if (capacity == GD25_JEDEC_CAPACITY_16MBIT)
{
priv->nsectors = GD25_NSECTORS_16MBIT;
}
else if (capacity == GD25_JEDEC_CAPACITY_32MBIT)
{
priv->nsectors = GD25_NSECTORS_32MBIT;
}
else if (capacity == GD25_JEDEC_CAPACITY_64MBIT)
{
priv->nsectors = GD25_NSECTORS_64MBIT;
}
else if (capacity == GD25_JEDEC_CAPACITY_128MBIT)
{
priv->nsectors = GD25_NSECTORS_128MBIT;
}
else if (capacity == GD25_JEDEC_CAPACITY_256MBIT)
{
priv->nsectors = GD25_NSECTORS_256MBIT;
}
else
{
goto out;
}
priv->memory = memory;
/* Capacity greater than 16MB, Enable four-byte address */
if (priv->nsectors > GD25_NSECTORS_128MBIT)
{
if (!gd25_4ben(priv))
{
ferr("ERROR: capacity %02x: Can't enable 4-byte mode!\n",
capacity);
ret = -EBUSY;
goto out;
}
priv->addr_4byte = true;
}
ret = OK;
}
out:
/* We don't understand the manufacturer or the memory type.
* Or enable four-byte address failed.
* Or success.
*/
gd25_pd(priv);
gd25_unlock(priv->spi);
return ret;
}
/***************************************************************************
* Name: gd25_unprotect
***************************************************************************/
#ifndef CONFIG_GD25_READONLY
static void gd25_unprotect(FAR struct gd25_dev_s *priv)
{
/* Lock and configure the SPI bus */
gd25_lock(priv->spi);
gd25_purdid(priv);
/* Wait for any preceding write or erase operation to complete. */
gd25_waitwritecomplete(priv);
/* Send "Write enable (WREN)" */
gd25_wren(priv);
SPI_SELECT(priv->spi, SPIDEV_FLASH(priv->spi_devid), true);
/* Send "Write enable status (EWSR)" */
SPI_SEND(priv->spi, GD25_WRSR);
/* Following by the new status value */
SPI_SEND(priv->spi, 0);
SPI_SEND(priv->spi, 0);
SPI_SELECT(priv->spi, SPIDEV_FLASH(priv->spi_devid), false);
/* Unlock the SPI bus */
gd25_pd(priv);
gd25_unlock(priv->spi);
}
#endif
/***************************************************************************
* Name: gd25_waitwritecomplete
***************************************************************************/
static uint8_t gd25_waitwritecomplete(FAR struct gd25_dev_s *priv)
{
uint8_t status;
do
{
status = gd25_rdsr(priv, 0);
if (priv->prev_instr != GD25_PP && (status & GD25_SR_WIP) != 0)
{
gd25_unlock(priv->spi);
nxsig_usleep(1000);
gd25_lock(priv->spi);
}
}
while ((status & GD25_SR_WIP) != 0);
return status;
}
/***************************************************************************
* Name: gd25_rdsr
***************************************************************************/
static inline uint8_t gd25_rdsr(FAR struct gd25_dev_s *priv, uint32_t id)
{
uint8_t status;
uint8_t rdsr[2] =
{
GD25_RDSR, GD25_RDSR1
};
SPI_SELECT(priv->spi, SPIDEV_FLASH(priv->spi_devid), true);
SPI_SEND(priv->spi, rdsr[id]);
status = SPI_SEND(priv->spi, GD25_DUMMY);
SPI_SELECT(priv->spi, SPIDEV_FLASH(priv->spi_devid), false);
return status;
}
/***************************************************************************
* Name: gd25_4ben
*
* Enable 4 byte memory addressing mode
* Return success or not
*
***************************************************************************/
static inline bool gd25_4ben(FAR struct gd25_dev_s *priv)
{
SPI_SELECT(priv->spi, SPIDEV_FLASH(priv->spi_devid), true);
SPI_SEND(priv->spi, GD25_4BEN);
SPI_SELECT(priv->spi, SPIDEV_FLASH(priv->spi_devid), false);
if (priv->memory == GD25Q_JEDEC_MEMORY_TYPE)
{
return ((gd25_rdsr(priv, 1) & GD25Q_SR1_EN4B) == GD25Q_SR1_EN4B);
}
else
{
return ((gd25_rdsr(priv, 1) & GD25_SR1_EN4B) == GD25_SR1_EN4B);
}
}
/***************************************************************************
* Name: gd25_wren
***************************************************************************/
static inline void gd25_wren(FAR struct gd25_dev_s *priv)
{
SPI_SELECT(priv->spi, SPIDEV_FLASH(priv->spi_devid), true);
SPI_SEND(priv->spi, GD25_WREN);
SPI_SELECT(priv->spi, SPIDEV_FLASH(priv->spi_devid), false);
}
/***************************************************************************
* Name: gd25_wrdi
***************************************************************************/
static inline void gd25_wrdi(FAR struct gd25_dev_s *priv)
{
SPI_SELECT(priv->spi, SPIDEV_FLASH(priv->spi_devid), true);
SPI_SEND(priv->spi, GD25_WRDI);
SPI_SELECT(priv->spi, SPIDEV_FLASH(priv->spi_devid), false);
}
/***************************************************************************
* Name: gd25_is_erased
***************************************************************************/
static bool gd25_is_erased(FAR struct gd25_dev_s *priv, off_t address,
off_t size)
{
size_t npages = size >> GD25_PAGE_SHIFT;
uint32_t erased_32;
unsigned int i;
uint32_t buf[GD25_PAGE_SIZE / sizeof(uint32_t)];
DEBUGASSERT((address % GD25_PAGE_SIZE) == 0);
DEBUGASSERT((size % GD25_PAGE_SIZE) == 0);
memset(&erased_32, GD25_ERASED_STATE, sizeof(erased_32));
/* Walk all pages in given area. */
while (npages)
{
/* Check if all bytes of page is in erased state. */
gd25_byteread(priv, (uint8_t *)buf, address, GD25_PAGE_SIZE);
for (i = 0; i < GD25_PAGE_SIZE / sizeof(uint32_t); i++)
{
if (buf[i] != erased_32)
{
/* Page not in erased state! */
return false;
}
}
address += GD25_PAGE_SIZE;
npages--;
}
return true;
}
/***************************************************************************
* Name: gd25_sectorerase
***************************************************************************/
static void gd25_sectorerase(FAR struct gd25_dev_s *priv, off_t sector)
{
off_t address = sector << GD25_SECTOR_SHIFT;
finfo("sector: %08lx\n", (long)sector);
/* Check if sector is already erased. */
if (gd25_is_erased(priv, address, GD25_SECTOR_SIZE))
{
/* Sector already in erased state, so skip erase. */
return;
}
/* Wait for any preceding write or erase operation to complete. */
gd25_waitwritecomplete(priv);
/* Send write enable instruction */
gd25_wren(priv);
SPI_SELECT(priv->spi, SPIDEV_FLASH(priv->spi_devid), true);
/* Send the "Sector Erase (SE)" instruction */
SPI_SEND(priv->spi, GD25_SE);
priv->prev_instr = GD25_SE;
/* Send the sector address high byte first. Only the most significant
* bits (those corresponding to the sector) have any meaning.
*/
if (priv->addr_4byte)
{
SPI_SEND(priv->spi, (address >> 24) & 0xff);
}
SPI_SEND(priv->spi, (address >> 16) & 0xff);
SPI_SEND(priv->spi, (address >> 8) & 0xff);
SPI_SEND(priv->spi, address & 0xff);
SPI_SELECT(priv->spi, SPIDEV_FLASH(priv->spi_devid), false);
}
/***************************************************************************
* Name: gd25_chiperase
***************************************************************************/
static inline int gd25_chiperase(FAR struct gd25_dev_s *priv)
{
/* Wait for any preceding write or erase operation to complete. */
gd25_waitwritecomplete(priv);
/* Send write enable instruction */
gd25_wren(priv);
SPI_SELECT(priv->spi, SPIDEV_FLASH(priv->spi_devid), true);
/* Send the "Chip Erase (CE)" instruction */
SPI_SEND(priv->spi, GD25_CE);
priv->prev_instr = GD25_CE;
SPI_SELECT(priv->spi, SPIDEV_FLASH(priv->spi_devid), false);
return OK;
}
/***************************************************************************
* Name: gd25_byteread
***************************************************************************/
static void gd25_byteread(FAR struct gd25_dev_s *priv, FAR uint8_t *buffer,
off_t address, size_t nbytes)
{
finfo("address: %08lx nbytes: %d\n", (long)address, (int)nbytes);
/* Wait for any preceding write or erase operation to complete. */
gd25_waitwritecomplete(priv);
/* Make sure that writing is disabled */
gd25_wrdi(priv);
SPI_SELECT(priv->spi, SPIDEV_FLASH(priv->spi_devid), true);
/* Send "Read from Memory " instruction */
#ifdef CONFIG_GD25_SLOWREAD
SPI_SEND(priv->spi, GD25_RDDATA);
priv->prev_instr = GD25_RDDATA;
#else
SPI_SEND(priv->spi, GD25_FRD);
priv->prev_instr = GD25_FRD;
#endif
/* Send the address high byte first. */
if (priv->addr_4byte)
{
SPI_SEND(priv->spi, (address >> 24) & 0xff);
}
SPI_SEND(priv->spi, (address >> 16) & 0xff);
SPI_SEND(priv->spi, (address >> 8) & 0xff);
SPI_SEND(priv->spi, address & 0xff);
/* Send a dummy byte */
#ifndef CONFIG_GD25_SLOWREAD
SPI_SEND(priv->spi, GD25_DUMMY);
#endif
/* Then read all of the requested bytes */
SPI_RECVBLOCK(priv->spi, buffer, nbytes);
SPI_SELECT(priv->spi, SPIDEV_FLASH(priv->spi_devid), false);
}
/***************************************************************************
* Name: gd25_pagewrite
***************************************************************************/
#ifndef CONFIG_GD25_READONLY
static void gd25_pagewrite(FAR struct gd25_dev_s *priv,
FAR const uint8_t *buffer, off_t address,
size_t nbytes)
{
finfo("address: %08lx nwords: %d\n", (long)address, (int)nbytes);
DEBUGASSERT(priv && buffer && (address & 0xff) == 0 &&
(nbytes & 0xff) == 0);
for (; nbytes > 0; nbytes -= GD25_PAGE_SIZE)
{
/* Wait for any preceding write or erase operation to complete. */
gd25_waitwritecomplete(priv);
/* Enable write access to the FLASH */
gd25_wren(priv);
SPI_SELECT(priv->spi, SPIDEV_FLASH(priv->spi_devid), true);
/* Send the "Page Program (GD25_PP)" Command */
SPI_SEND(priv->spi, GD25_PP);
priv->prev_instr = GD25_PP;
/* Send the address high byte first. */
if (priv->addr_4byte)
{
SPI_SEND(priv->spi, (address >> 24) & 0xff);
}
SPI_SEND(priv->spi, (address >> 16) & 0xff);
SPI_SEND(priv->spi, (address >> 8) & 0xff);
SPI_SEND(priv->spi, address & 0xff);
/* Then send the page of data */
SPI_SNDBLOCK(priv->spi, buffer, GD25_PAGE_SIZE);
SPI_SELECT(priv->spi, SPIDEV_FLASH(priv->spi_devid), false);
/* Update addresses */
address += GD25_PAGE_SIZE;
buffer += GD25_PAGE_SIZE;
}
}
#endif
/***************************************************************************
* Name: gd25_bytewrite
***************************************************************************/
#if defined(CONFIG_MTD_BYTE_WRITE) && !defined(CONFIG_GD25_READONLY)
static inline void gd25_bytewrite(FAR struct gd25_dev_s *priv,
FAR const uint8_t *buffer, off_t offset,
uint16_t count)
{
finfo("offset: %08lx count:%d\n", (long)offset, count);
/* Wait for any preceding write to complete. We could simplify things by
* perform this wait at the end of each write operation (rather than at
* the beginning of ALL operations), but have the wait first will slightly
* improve performance.
*/
gd25_waitwritecomplete(priv);
/* Enable the write access to the FLASH */
gd25_wren(priv);
SPI_SELECT(priv->spi, SPIDEV_FLASH(priv->spi_devid), true);
/* Send "Page Program (PP)" command */
SPI_SEND(priv->spi, GD25_PP);
priv->prev_instr = GD25_PP;
/* Send the page offset high byte first. */
if (priv->addr_4byte)
{
SPI_SEND(priv->spi, (offset >> 24) & 0xff);
}
SPI_SEND(priv->spi, (offset >> 16) & 0xff);
SPI_SEND(priv->spi, (offset >> 8) & 0xff);
SPI_SEND(priv->spi, offset & 0xff);
/* Then write the specified number of bytes */
SPI_SNDBLOCK(priv->spi, buffer, count);
SPI_SELECT(priv->spi, SPIDEV_FLASH(priv->spi_devid), false);
finfo("Written\n");
}
#endif /* defined(CONFIG_MTD_BYTE_WRITE) && !defined(CONFIG_GD25_READONLY) */
/***************************************************************************
* Name: gd25_erase
***************************************************************************/
static int gd25_erase(FAR struct mtd_dev_s *dev, off_t startblock,
size_t nblocks)
{
#ifdef CONFIG_GD25_READONLY
return -EACESS
#else
FAR struct gd25_dev_s *priv = (FAR struct gd25_dev_s *)dev;
size_t blocksleft = nblocks;
finfo("startblock: %08lx nblocks: %d\n", (long)startblock, (int)nblocks);
/* Lock access to the SPI bus until we complete the erase */
gd25_lock(priv->spi);
gd25_purdid(priv);
while (blocksleft-- > 0)
{
/* Erase each sector */
gd25_sectorerase(priv, startblock);
startblock++;
}
gd25_pd(priv);
gd25_unlock(priv->spi);
return (int)nblocks;
#endif
}
/***************************************************************************
* Name: gd25_bread
***************************************************************************/
static ssize_t gd25_bread(FAR struct mtd_dev_s *dev, off_t startblock,
size_t nblocks, FAR uint8_t *buffer)
{
ssize_t nbytes;
finfo("startblock: %08lx nblocks: %d\n", (long)startblock, (int)nblocks);
nbytes = gd25_read(dev, startblock << GD25_PAGE_SHIFT,
nblocks << GD25_PAGE_SHIFT, buffer);
if (nbytes > 0)
{
nbytes >>= GD25_PAGE_SHIFT;
}
return nbytes;
}
/***************************************************************************
* Name: gd25_bwrite
***************************************************************************/
static ssize_t gd25_bwrite(FAR struct mtd_dev_s *dev, off_t startblock,
size_t nblocks, FAR const uint8_t *buffer)
{
#ifdef CONFIG_GD25_READONLY
return -EACCESS;
#else
FAR struct gd25_dev_s *priv = (FAR struct gd25_dev_s *)dev;
finfo("startblock: %08lx nblocks: %d\n", (long)startblock, (int)nblocks);
/* Lock the SPI bus and write all of the pages to FLASH */
gd25_lock(priv->spi);
gd25_purdid(priv);
gd25_pagewrite(priv, buffer, startblock << GD25_PAGE_SHIFT,
nblocks << GD25_PAGE_SHIFT);
gd25_pd(priv);
gd25_unlock(priv->spi);
return nblocks;
#endif
}
/***************************************************************************
* Name: gd25_read
***************************************************************************/
static ssize_t gd25_read(FAR struct mtd_dev_s *dev, off_t offset,
size_t nbytes, FAR uint8_t *buffer)
{
FAR struct gd25_dev_s *priv = (FAR struct gd25_dev_s *)dev;
finfo("offset: %08lx nbytes: %d\n", (long)offset, (int)nbytes);
/* Lock the SPI bus and select this FLASH part */
gd25_lock(priv->spi);
gd25_purdid(priv);
gd25_byteread(priv, buffer, offset, nbytes);
gd25_pd(priv);
gd25_unlock(priv->spi);
finfo("return nbytes: %d,%x,%x\n", (int)nbytes, buffer[0], buffer[1]);
return nbytes;
}
/***************************************************************************
* Name: gd25_write
***************************************************************************/
#ifdef CONFIG_MTD_BYTE_WRITE
static ssize_t gd25_write(FAR struct mtd_dev_s *dev, off_t offset,
size_t nbytes, FAR const uint8_t *buffer)
{
#ifdef CONFIG_GD25_READONLY
return -EACCESS;
#else
FAR struct gd25_dev_s *priv = (FAR struct gd25_dev_s *)dev;
int startpage;
int endpage;
int count;
int index;
int bytestowrite;
finfo("offset: %08lx nbytes: %d\n", (long)offset, (int)nbytes);
/* We must test if the offset + count crosses one or more pages
* and perform individual writes. The devices can only write in
* page increments.
*/
startpage = offset / GD25_PAGE_SIZE;
endpage = (offset + nbytes) / GD25_PAGE_SIZE;
gd25_lock(priv->spi);
gd25_purdid(priv);
if (startpage == endpage)
{
/* All bytes within one programmable page. Just do the write. */
gd25_bytewrite(priv, buffer, offset, nbytes);
}
else
{
/* Write the 1st partial-page */
count = nbytes;
bytestowrite = GD25_PAGE_SIZE - (offset & (GD25_PAGE_SIZE - 1));
gd25_bytewrite(priv, buffer, offset, bytestowrite);
/* Update offset and count */
offset += bytestowrite;
count -= bytestowrite;
index = bytestowrite;
/* Write full pages */
while (count >= GD25_PAGE_SIZE)
{
gd25_bytewrite(priv, &buffer[index], offset, GD25_PAGE_SIZE);
/* Update offset and count */
offset += GD25_PAGE_SIZE;
count -= GD25_PAGE_SIZE;
index += GD25_PAGE_SIZE;
}
/* Now write any partial page at the end */
if (count > 0)
{
gd25_bytewrite(priv, &buffer[index], offset, count);
}
}
gd25_pd(priv);
gd25_unlock(priv->spi);
return nbytes;
#endif
}
#endif
/***************************************************************************
* Name: gd25_ioctl
***************************************************************************/
static int gd25_ioctl(FAR struct mtd_dev_s *dev, int cmd, unsigned long arg)
{
FAR struct gd25_dev_s *priv = (FAR struct gd25_dev_s *)dev;
int ret = -EINVAL;
finfo("cmd: %d\n", cmd);
switch (cmd)
{
case MTDIOC_GEOMETRY:
{
FAR struct mtd_geometry_s *geo =
(FAR struct mtd_geometry_s *)((uintptr_t)arg);
if (geo)
{
memset(geo, 0, sizeof(*geo));
geo->blocksize = GD25_PAGE_SIZE;
geo->erasesize = GD25_SECTOR_SIZE;
geo->neraseblocks = priv->nsectors;
ret = OK;
finfo("blocksize: %" PRIu32 " erasesize: %" PRIu32
" neraseblocks: %" PRIu32 "\n",
geo->blocksize, geo->erasesize, geo->neraseblocks);
}
}
break;
case BIOC_PARTINFO:
{
FAR struct partition_info_s *info =
(FAR struct partition_info_s *)arg;
if (info != NULL)
{
info->numsectors = priv->nsectors *
GD25_SECTOR_SIZE / GD25_PAGE_SIZE;
info->sectorsize = GD25_PAGE_SIZE;
info->startsector = 0;
info->parent[0] = '\0';
ret = OK;
}
}
break;
case MTDIOC_BULKERASE:
{
/* Erase the entire device */
gd25_lock(priv->spi);
gd25_purdid(priv);
ret = gd25_chiperase(priv);
gd25_pd(priv);
gd25_unlock(priv->spi);
}
break;
case MTDIOC_ERASESTATE:
{
FAR uint8_t *result = (FAR uint8_t *)arg;
*result = GD25_ERASED_STATE;
ret = OK;
}
break;
default:
ret = -ENOTTY;
break;
}
finfo("return %d\n", ret);
return ret;
}
/***************************************************************************
* Public Functions
***************************************************************************/
/***************************************************************************
* Name: gd25_initialize
*
* Description:
* Create an initialize MTD device instance. MTD devices aren't registered
* in the file system, but are created as instances that can be bound to
* other functions (such as a block or character driver front end).
*
***************************************************************************/
FAR struct mtd_dev_s *gd25_initialize(FAR struct spi_dev_s *spi,
uint32_t spi_devid)
{
FAR struct gd25_dev_s *priv;
int ret;
priv = (FAR struct gd25_dev_s *)kmm_zalloc(sizeof(struct gd25_dev_s));
if (priv)
{
/* Initialize the allocated structure (unsupported methods were
* nullified by kmm_zalloc).
*/
priv->mtd.erase = gd25_erase;
priv->mtd.bread = gd25_bread;
priv->mtd.bwrite = gd25_bwrite;
priv->mtd.read = gd25_read;
priv->mtd.ioctl = gd25_ioctl;
#ifdef CONFIG_MTD_BYTE_WRITE
priv->mtd.write = gd25_write;
#endif
priv->mtd.name = "gd25";
priv->spi = spi;
priv->spi_devid = spi_devid;
/* Deselect the FLASH */
SPI_SELECT(spi, SPIDEV_FLASH(priv->spi_devid), false);
/* Identify the FLASH chip and get its capacity */
ret = gd25_readid(priv);
if (ret != OK)
{
ferr("ERROR: Unrecognized\n");
kmm_free(priv);
return NULL;
}
else
{
/* Make sure that the FLASH is unprotected
* so that we can write into it
*/
#ifndef CONFIG_GD25_READONLY
gd25_unprotect(priv);
#endif
}
}
/* Return the implementation-specific state structure as the MTD device */
return (FAR struct mtd_dev_s *)priv;
}
Reference in New Issue View Git Blame Copy Permalink