nuttx/drivers/lcd/Make.defs
Gregory Nutt 6a405ead67 This commit adds a barbones FTDI FT80x driver. It is untested (I don't even have hardware yet and, hence, it is marked as EXPERIMENTAL
Squashed commit of the following:

    drivers/lcd:  Finishes off basic FT80X.  Still missing some niceties.
    drivers/lcd: Rethink FT80X display list interface.
    drivers/lcd:  More FT800x display list logic.  Still not complete.
    drivers/lcd:  Add some basic FT80x initialization logic.
    drivers/lcd:  Add ft80x display list IOCTL framework.  Still missing low level display list operations.
    drivers/lcd:  FT80x driver cannot be a standard LCD driver but must, instead, be a custom character driver.
    drivers/lcd:  Add FT800 co-processor commands and display list helpers.
    drivers/lcd:  Add SPI interface and framework for the initialization and the basic LCD driver.
    drivers/lcd:  Add beginnings of some FT80x implementation.
    drivers/lcd:  Add definitions for the FTDI FT801 part
    include/nuttx/lcd/ft800.h:  Add initial FT800 interface definition.
    drivers/lcd:  Add ft800 header file.
2018-02-17 11:59:07 -06:00

148 lines
3.8 KiB
Plaintext

############################################################################
# drivers/lcd/Make.defs
#
# Copyright (C) 2010-2012, 2017-2018 Gregory Nutt. All rights reserved.
# Author: Gregory Nutt <gnutt@nuttx.org>
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in
# the documentation and/or other materials provided with the
# distribution.
# 3. Neither the name NuttX nor the names of its contributors may be
# used to endorse or promote products derived from this software
# without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
############################################################################
ifeq ($(CONFIG_LCD),y)
# Support for the generic LCD framebufer front-end
ifeq ($(CONFIG_LCD_FRAMEBUFFER),y)
CSRCS += lcd_framebuffer.c
endif
# Include support for Graphics LCD drivers
ifeq ($(CONFIG_LCD_FT80X),y)
CSRCS += ft80x_base.c
ifeq ($(CONFIG_LCD_FT80X_SPI),y)
CSRCS += ft80x_spi.c
else ifeq ($(CONFIG_LCD_FT80X_I2C),y)
CSRCS += ft80x_i2c.c
endif
endif
ifeq ($(CONFIG_LCD_P14201),y)
CSRCS += p14201.c
endif
ifeq ($(CONFIG_LCD_NOKIA6100),y)
CSRCS += nokia6100.c
endif
ifeq ($(CONFIG_LCD_UG2864AMBAG01),y)
CSRCS += ug-2864ambag01.c
endif
ifeq ($(CONFIG_LCD_UG9664HSWAG01),y)
CSRCS += ug-9664hswag01.c
endif
ifeq ($(CONFIG_LCD_SSD1306),y)
CSRCS += ssd1306_base.c
endif
ifeq ($(CONFIG_LCD_SSD1306_SPI),y)
CSRCS += ssd1306_spi.c
endif
ifeq ($(CONFIG_LCD_SSD1306_I2C),y)
CSRCS += ssd1306_i2c.c
endif
ifeq ($(CONFIG_LCD_SSD1289),y)
CSRCS += ssd1289.c
endif
ifeq ($(CONFIG_LCD_SSD1351),y)
CSRCS += ssd1351.c
endif
ifeq ($(CONFIG_LCD_MIO283QT2),y)
CSRCS += mio283qt2.c
endif
ifeq ($(CONFIG_LCD_MAX7219),y)
CSRCS += max7219.c
endif
ifeq ($(CONFIG_LCD_MIO283QT9A),y)
CSRCS += mio283qt9a.c
endif
ifeq ($(CONFIG_LCD_PCD8544),y)
CSRCS += pcd8544.c
endif
ifeq ($(CONFIG_LCD_ST7565),y)
CSRCS += st7565.c
endif
ifeq ($(CONFIG_LCD_ST7567),y)
CSRCS += st7567.c
endif
ifeq ($(CONFIG_LCD_SHARP_MEMLCD),y)
CSRCS += memlcd.c
endif
ifeq ($(CONFIG_LCD_ILI9341),y)
CSRCS += ili9341.c
endif
ifeq ($(CONFIG_LCD_RA8875),y)
CSRCS += ra8875.c
endif
endif # CONFIG_LCD
ifeq ($(CONFIG_SLCD),y)
# Include support for Alphanumeric/Segment LCD drivers
ifeq ($(CONFIG_LCD_BACKPACK),y)
CSRCS += pcf8574_lcd_backpack.c
endif
endif # CONFIG_SLCD
# Include LCD driver build support (the nested if-then-else implements an OR)
ifeq ($(CONFIG_LCD),y)
DEPPATH += --dep-path lcd
VPATH += :lcd
CFLAGS += ${shell $(INCDIR) $(INCDIROPT) "$(CC)" $(TOPDIR)$(DELIM)drivers$(DELIM)lcd}
else ifeq ($(CONFIG_SLCD),y)
DEPPATH += --dep-path lcd
VPATH += :lcd
CFLAGS += ${shell $(INCDIR) $(INCDIROPT) "$(CC)" $(TOPDIR)$(DELIM)drivers$(DELIM)lcd}
endif