nuttx

bcmf_bdc.c

drivers/wireless/ieee80211: Used nxstyle to find coding standard violations, then corrected them.

2018-08-22 17:35:17 -06:00

bcmf_bdc.h

drivers/wiresless/ieee80211: Correct some initialization problems with BCM43362 chip. Adds BCM43428 support. arch/arm/src: Add support for SDIO card to SDIO driver.

2018-04-26 08:10:23 -06:00

bcmf_cdc.c

drivers/wireless/ieee80211: Used nxstyle to find coding standard violations, then corrected them.

2018-08-22 17:35:17 -06:00

bcmf_cdc.h

bcmf: add escan ioctls support + cleanup

2017-04-28 19:44:48 +02:00

bcmf_chip_43362.c

drivers/wireless/ieee802.11: Extend Add capabilility to get firmware from a mounted file system to BCM43362. Also fix some compile/link issues introduced in the previous commit.

2018-10-07 15:00:13 -06:00

bcmf_chip_43438.c

drivers/wireless/ieee802.11: Extend Add capabilility to get firmware from a mounted file system to BCM43362. Also fix some compile/link issues introduced in the previous commit.

2018-10-07 15:00:13 -06:00

bcmf_core.c

i.MXRT USDHC: This change completes SDIO support for IMXRT, and also adds support for WiFi using the AP6212A module based on Simon Piriou's rather excellent work. The patch should also address DavidS's concern about width setting for USDHC1 & 2.

2019-07-28 16:20:33 -06:00

bcmf_core.h

Photon: Cosmetic changes to style detected by tools/nxstyle

2017-05-03 18:20:57 -06:00

bcmf_driver.c

drivers/wireless/ieee802.11: Extend Add capabilility to get firmware from a mounted file system to BCM43362. Also fix some compile/link issues introduced in the previous commit.

2018-10-07 15:00:13 -06:00

bcmf_driver.h

bcmf: add SIOCGIWSCAN ioctl support

2017-05-20 22:13:15 +02:00

bcmf_ioctl.h

Cosmetic changes for coding standard fixes.

2018-10-20 18:15:44 -06:00

bcmf_netdev.c

Add support for the BCM43438A1 Bluetooth capability. It also adds a serial 'shim' to allow any regular serial port that can support a Bluetooth H4 interface (i.e. it has RTS/CTS) to be used to drive a Bluetooth device (Get a handle to it via hci_uart_getdevice("/dev/xxx") and then pass it to the btuart_register function.

2019-09-21 07:16:37 -06:00

bcmf_netdev.h

bcmf: add netdev support for Broadcom FullMAC driver

2017-04-30 20:36:35 +02:00

bcmf_sdio_core.h

drivers/wiresless/ieee80211: Correct some initialization problems with BCM43362 chip. Adds BCM43428 support. arch/arm/src: Add support for SDIO card to SDIO driver.

2018-04-26 08:10:23 -06:00

bcmf_sdio_regs.h

Photon: Cosmetic changes to style detected by tools/nxstyle

2017-05-03 18:20:57 -06:00

bcmf_sdio.c

Cosmetic changes for coding standard fixes.

2018-10-20 18:15:44 -06:00

bcmf_sdio.h

drivers/wireless/ieee802.11: Extend Add capabilility to get firmware from a mounted file system to BCM43362. Also fix some compile/link issues introduced in the previous commit.

2018-10-07 15:00:13 -06:00

bcmf_sdpcm.c

drivers/wireless/ieee80211/bcmf_sdpcm.c: Remove incorrect OR condition. Always true, would always cause allocation failure. Noted by Shao Li in Issue 127.

2018-10-26 05:26:26 -06:00

bcmf_sdpcm.h

Photon: Cosmetic changes to style detected by tools/nxstyle

2017-05-03 18:20:57 -06:00

bcmf_utils.c

sched/semaphore: sem_timedwait() is a cancellation point and, hence, cannot be called from within the OS. Created nxsem_timedwait() that is equivalent but does not modify the errno and does not cause cancellation. All calls to sem_timedwait() change to calls to nxsem_timedwait() in the OS.

2017-10-05 07:24:54 -06:00

bcmf_utils.h

bcmf: add SIOCGIWSCAN ioctl support

2017-05-20 22:13:15 +02:00

Kconfig

drivers/usbhost: Remove all traces of support for the installable GPL RTL8187 USB host driver.

2019-10-22 17:44:16 -06:00

Make.defs

drivers/wiresless/ieee80211: Correct some initialization problems with BCM43362 chip. Adds BCM43428 support. arch/arm/src: Add support for SDIO card to SDIO driver.

2018-04-26 08:10:23 -06:00

mmc_sdio.c

i.MXRT USDHC: This change completes SDIO support for IMXRT, and also adds support for WiFi using the AP6212A module based on Simon Piriou's rather excellent work. The patch should also address DavidS's concern about width setting for USDHC1 & 2.

2019-07-28 16:20:33 -06:00