..
gnu
This commit renames all internal OS functions defined under sched/task so that they begin with the prefix. For example, nxtask_exit() vs. task_exit().
2019-02-04 13:42:51 -06:00
iar
This commit renames all internal OS functions defined under sched/task so that they begin with the prefix. For example, nxtask_exit() vs. task_exit().
2019-02-04 13:42:51 -06:00
barriers.h
arch/arm: The last big change that unified the cache interfaces had a bad side-effect: It also removed the memory barrier definitions that were also in the removed architecture-specific cache.h header files. Fixed by adding a new barriers.h header file that provides these definitions.
2019-03-19 13:12:19 -06:00
dwt.h
arch/arm/src/armv7-m: Make naming used in ARM register definition files a little more compatible with naming used in other header files.
2018-11-27 10:36:40 -06:00
etm.h
exc_return.h
Squashed commit of the following:
2018-06-20 12:30:37 -06:00
fpb.h
arch/arm/include/tiva: Add support for cc13xx interrupts. arch/arm/src/armv7-m: Add FPB header file.
2018-12-03 07:26:02 -06:00
itm_syslog.h
itm.h
arch/arm/src/armv7-m/itm.h: Fix missing space causing macro issues
2018-12-01 06:12:29 -06:00
Kconfig
arch/: Unify the cache interface for all architectures
2019-03-19 10:37:13 -06:00
mpu.h
arch/: Unify the cache interface for all architectures
2019-03-19 10:37:13 -06:00
nvic.h
arch/armv7-m: Make the default NVIC_VECTAB_TBLOFF_MASK safer. The base address of the new vector table must be aligned to the size of the vector table extended to the next larger power of 2.
2019-03-19 10:43:32 -06:00
psr.h
ram_vectors.h
arch/arm: Fix an error found in build testing.
2018-06-20 13:12:54 -06:00
svcall.h
systick.h
arch/arm/src/armv7-m: Implement SYSTICK timer driver
2018-08-23 10:09:56 -06:00
Toolchain.defs
Add CLANG definitions in Kconfig and Toolchain.defs
2017-07-02 06:42:48 -06:00
tpi.h
arch/arm/src/armv7-m: Make naming used in ARM register definition files a little more compatible with naming used in other header files.
2018-11-27 10:36:40 -06:00
up_assert.c
arch/xxx/src/xxx/up_assert.c: Dump CPU0 IDLE stack only when PID equals 0. IDLE threads of other CPUs do not need this special check
2019-01-26 10:59:23 -06:00
up_blocktask.c
Replace all ASSERT with DEBUGASSERT to save the code space
2018-08-24 06:58:30 -06:00
up_cache.c
arch/arm: The last big change that unified the cache interfaces had a bad side-effect: It also removed the memory barrier definitions that were also in the removed architecture-specific cache.h header files. Fixed by adding a new barriers.h header file that provides these definitions.
2019-03-19 13:12:19 -06:00
up_copyarmstate.c
Squashed commit of the following:
2018-06-20 12:30:37 -06:00
up_copyfullstate.c
Remove comment blocks from empty file sections.
2017-01-19 11:59:41 -06:00
up_doirq.c
Remove uninterpretable comment.
2017-01-26 07:20:35 -06:00
up_hardfault.c
arch/arm/src: Remove general register dump from fault handler since the same info already dump in PANIC
2018-11-11 12:47:03 -06:00
up_initialstate.c
In the current implementation we only use very high priority interrupts (levels 0, 0x10 and 0x20 in CORTEX-M speak) but that means there are loads of lower priority ones that are effectively unused. I have *not* changed the semantics of these levels but have 'shifted' them to be based around the midpoint of the available interrupts (0x80) rather than at the top end....that allows for interrupts to be defined above (or, indeed, below) them as needed by the application. This should have no functional effect on existing code but adds in a clean capability to define higher priority interrupts.
2018-12-03 17:41:59 -06:00
up_itm_syslog.c
arch/arm/src/armv7-m: Make naming used in ARM register definition files a little more compatible with naming used in other header files.
2018-11-27 10:36:40 -06:00
up_itm.c
arch/arm/src/armv7-m: Make naming used in ARM register definition files a little more compatible with naming used in other header files.
2018-11-27 10:36:40 -06:00
up_memfault.c
arch/arm/src: Remove general register dump from fault handler since the same info already dump in PANIC
2018-11-11 12:47:03 -06:00
up_mpu.c
Revert "arch/arm/armv7-m: MPU: mpu_log2regionceil needs take into account the offset too"
2019-01-08 07:46:19 -06:00
up_ramvec_attach.c
arch/arm: Fix an error found in build testing.
2018-06-20 13:12:54 -06:00
up_ramvec_initialize.c
Merged in jjlange/nuttx/lpc40xx (pull request #946 )
2019-07-11 16:50:00 +00:00
up_releasepending.c
Revert "All CMP platforms: Apply same fix verified on other platforms found on Xtensa."
2016-12-25 07:08:44 -06:00
up_reprioritizertr.c
Replace non critical PANIC with DEBUGPANIC to save the code space
2018-08-24 06:21:15 -06:00
up_schedulesigaction.c
Squashed commit of the following:
2019-04-29 14:52:05 -06:00
up_sigdeliver.c
Squashed commit of the following:
2019-04-29 14:52:05 -06:00
up_signal_dispatch.c
Squashed commit of the following:
2019-04-29 14:52:05 -06:00
up_stackcheck.c
Merged in david_s5/nuttx/master_stack_check (pull request #834 )
2019-02-28 21:36:47 +00:00
up_svcall.c
Squashed commit of the following:
2019-04-29 14:52:05 -06:00
up_systemreset.c
arch/ and config/ files: All board interfaces (those starting with board_) must be defined in board-specific logic. Otherwise, they cannot be customized of specialized usage by different boards. The board_reset() interface was defined in architecture-specific logic that only called up_systemreset(). That is useless!
2019-03-25 11:12:38 -06:00
up_systick.c
arch/arm/src/armv7-m/up_systick.c: Fix warning: 'NVIC_IRQ_SYSTICK redefined'
2018-08-29 06:10:52 -06:00
up_trigger_irq.c
arch/arm/src/armv7-m/up_trigger_irq.c: Correct copyright and authorship of file. Cloning error.
2018-08-25 11:12:12 -06:00
up_unblocktask.c
Replace all ASSERT with DEBUGASSERT to save the code space
2018-08-24 06:58:30 -06:00
up_vectors.c
arch/arm/src/armv6+7-m/up_vectors.c: Fix the type mismatch warning for _ebss
2018-08-24 07:04:51 -06:00
e5dfd805e6