sergiotarxz/nuttx
sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
nuttx/arch/sh/src/m16c/m16c_lowputc.c
patacongo 7a9457bb07 Email address change in nuttx/ 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5145 42af7a65-404d-4744-a932-0658087f49c3
2012-09-13 18:32:24 +00:00

344 lines
11 KiB
C
Raw Blame History

/**************************************************************************
* arch/sh/src/m16c/m16c_lowputc.c
*
* Copyright (C) 2009 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
**************************************************************************/
/**************************************************************************
* Included Files
**************************************************************************/
#include <nuttx/config.h>
#include <stdint.h>
#include <nuttx/arch.h>
#include "up_internal.h"
#include "up_arch.h"
#include "chip.h"
#include "up_internal.h"
#include "m16c_uart.h"
/**************************************************************************
* Private Definitions
**************************************************************************/
/* Configuration **********************************************************/
#ifndef M16C_XIN_PRESCALER
# define M16C_XIN_PRESCALER 1
#endif
/* Is there any serial support? This might be the case if the board does
* not have serial ports but supports stdout through, say, an LCD.
*/
#if defined(CONFIG_UART0_DISABLE) || defined(CONFIG_UART1_DISABLE) || defined(CONFIG_UART2_DISABLE)
# define HAVE_SERIAL
#else
# undef HAVE_SERIAL
#endif
/* Is one of the serial ports a console? */
#if defined(CONFIG_UART0_SERIAL_CONSOLE) && !defined(CONFIG_UART0_DISABLE)
# define HAVE_SERIALCONSOLE 1
# undef CONFIG_UART1_SERIAL_CONSOLE
# undef CONFIG_UART2_SERIAL_CONSOLE
#elif defined(CONFIG_UART1_SERIAL_CONSOLE) && !defined(CONFIG_UART1_DISABLE)
# define HAVE_SERIALCONSOLE 1
# undef CONFIG_UART0_SERIAL_CONSOLE
# undef CONFIG_UART2_SERIAL_CONSOLE
#elif defined(CONFIG_UART2_SERIAL_CONSOLE) && !defined(CONFIG_UART2_DISABLE)
# define HAVE_SERIALCONSOLE 1
# undef CONFIG_UART0_SERIAL_CONSOLE
# undef CONFIG_UART1_SERIAL_CONSOLE
#else
# if defined(CONFIG_UART0_SERIAL_CONSOLE) || defined(CONFIG_UART1_SERIAL_CONSOLE)|| defined(CONFIG_UART2_SERIAL_CONSOLE)
# error "A serial console selected, but corresponding UART not enabled"
# endif
# undef HAVE_SERIALCONSOLE
#endif
#if defined(HAVE_SERIALCONSOLE) && defined(CONFIG_LCD_CONSOLE)
# error "Both serial and LCD consoles are defined"
#elif !defined(HAVE_SERIALCONSOLE) && !defined(CONFIG_LCD_CONSOLE)
# warning "No console is defined"
#endif
/* Select UART parameters for the selected console */
#ifdef HAVE_SERIALCONSOLE
#if defined(CONFIG_UART0_SERIAL_CONSOLE)
# define M16C_UART_BASE M16C_UART0_BASE
# define M16C_UART_BAUD CONFIG_UART0_BAUD
# define M16C_UART_BITS CONFIG_UART0_BITS
# define M16C_UART_PARITY CONFIG_UART0_PARITY
# define M16C_UART_2STOP CONFIG_UART0_2STOP
#elif defined(CONFIG_UART1_SERIAL_CONSOLE)
# define M16C_UART_BASE M16C_UART1_BASE
# define M16C_UART_BAUD CONFIG_UART1_BAUD
# define M16C_UART_BITS CONFIG_UART1_BITS
# define M16C_UART_PARITY CONFIG_UART1_PARITY
# define M16C_UART_2STOP CONFIG_UART1_2STOP
#elif defined(CONFIG_UART2_SERIAL_CONSOLE)
# define M16C_UART_BASE M16C_UART2_BASE
# define M16C_UART_BAUD CONFIG_UART2_BAUD
# define M16C_UART_BITS CONFIG_UART2_BITS
# define M16C_UART_PARITY CONFIG_UART2_PARITY
# define M16C_UART_2STOP CONFIG_UART2_2STOP
#else
# error "No CONFIG_UARTn_SERIAL_CONSOLE Setting"
#endif
/* Get mode setting */
#if M16C_UART_BITS == 7
# define M16C_MR_SMDBITS UART_MR_SMD7BITS
#elif M16C_UART_BITS == 8
# define M16C_MR_SMDBITS UART_MR_SMD8BITS
#elif M16C_UART_BITS == 8
# define M16C_MR_SMDBITS UART_MR_SMD9BITS
#else
# error "Number of bits not supported"
#endif
#if M16C_UART_PARITY == 0
# define M16C_MR_PARITY (0)
#elif M16C_UART_PARITY == 1
# define M16C_MR_PARITY UART_MR_PRYE
#elif M16C_UART_PARITY == 2
# define M16C_MR_PARITY (UART_MR_PRYE|UART_MR_PRY)
#else
# error "Invalid parity selection"
#endif
#if M16C_UART_2STOP != 0
# define M16C_MR_STOPBITS UART_MR_STPS
#else
# define M16C_MR_STOPBITS (0)
#endif
/* The full MR setting: */
#define M16C_MR_VALUE (M16C_MR_SMDBITS|M16C_MR_PARITY|M16C_MR_STOPBITS)
/* Clocking ***************************************************************/
/* The Bit Rate Generator (BRG) value can be calculated by:
*
* BRG = source-frequency / prescaler / 16 / baud rate - 1
*
* Example:
* source-frequency = 20,000,000 (20MHz)
* prescaler = 1
* baud rate = 19200
* BRG = 20,000,000/1/16/19200 - 1 = 64
*/
#define M16C_UART_BRG_VALUE \
((M16C_XIN_FREQ / (16 * M16C_XIN_PRESCALER * M16C_UART_BAUD)) - 1)
#endif /* HAVE_SERIALCONSOLE */
/**************************************************************************
* Private Types
**************************************************************************/
/**************************************************************************
* Private Function Prototypes
**************************************************************************/
/**************************************************************************
* Global Variables
**************************************************************************/
/**************************************************************************
* Private Variables
**************************************************************************/
/**************************************************************************
* Private Functions
**************************************************************************/
/**************************************************************************
* Name: up_txready
*
* Description:
* Return TRUE of the Transmit Data Register is empty
*
**************************************************************************/
#ifdef HAVE_SERIALCONSOLE
static inline int up_txready(void)
{
/* Check the TI bit in the CI register. 1=Transmit buffer empty */
return ((getreg8(M16C_UART_BASE + M16C_UART_C1) & UART_C1_TI) != 0);
}
#endif /* HAVE_SERIALCONSOLE */
/**************************************************************************
* Name: up_lowserialsetup
*
* Description:
* This performs basic initialization of the UART used for the serial
* console. Its purpose is to get the console output availabe as soon
* as possible.
*
**************************************************************************/
#if defined(HAVE_SERIALCONSOLE) && !defined(CONFIG_SUPPRESS_UART_CONFIG)
static inline void up_lowserialsetup(void)
{
uint8_t regval;
/* Set the baud rate generator */
putreg8(M16C_UART_BRG_VALUE, M16C_UART_BASE + M16C_UART_BRG);
/* Disable CTS/RTS */
putreg8(UART_C0_CRD, M16C_UART_BASE + M16C_UART_C0);
/* Disable RX/TX interrupts */
#if 0
putreg8(0, M16C_UCON);
#endif
/* Set interrupt cause=TX complete and continuous receive mode */
#if defined(CONFIG_UART0_SERIAL_CONSOLE)
regval = getreg8(M16C_UCON);
regval |= (UART_CON_U0IRS|UART_CON_U0RRM);
putreg8(regval, M16C_UCON);
#elif defined(CONFIG_UART1_SERIAL_CONSOLE)
regval = getreg8(M16C_UCON);
regval |= (UART_CON_U1IRS|UART_CON_U1RRM);
putreg8(regval, M16C_UCON);
#else
regval = getreg8(M16C_U2C1);
regval |= (UART_C1_U2IRS|UART_C1_U2RRM);
putreg8(regval, M16C_U2C1);
#endif
/* Set UART transmit/receive control register 1 to enable transmit and receive */
putreg8(UART_C1_TE|UART_C1_RE, M16C_UART_BASE + M16C_UART_C1);
/* Set UART transmit/receive mode register data bits, stop bits, parity */
putreg8(M16C_MR_VALUE, M16C_UART_BASE + M16C_UART_MR);
/* Set port direction registers for Rx/TX pins */
#if defined(CONFIG_UART0_SERIAL_CONSOLE)
regval = getreg8(M16C_PD6);
regval &= ~(1 << 2); /* PD6-2:RxD1 */
regval |= (1 << 3); /* PD6-3:TxD1 */
putreg8(regval, M16C_PD6);
#elif defined(CONFIG_UART1_SERIAL_CONSOLE)
regval = getreg8(M16C_PD6);
regval &= ~(1 << 6); /* PD6-6:RxD1 */
regval |= (1 << 7); /* PD6-7:TxD1 */
putreg8(regval, M16C_PD6);
#else
regval = getreg8(M16C_PD7);
regval &= ~(1 << 1); /* PD7-1:RxD1 */
regval &= (1 << 0); /* PD7-0:TxD1 */
putreg8(regval, M16C_PD7);
#endif
/* Read any data left in the RX fifo */
regval = (uint8_t)getreg16(M16C_UART_BASE + M16C_UART_RB);
}
#endif /* HAVE_SERIALCONFIG && !CONFIG_SUPPRESS_UART_CONFIG */
/**************************************************************************
* Public Functions
**************************************************************************/
/**************************************************************************
* Name: up_lowputc
*
* Description:
* Output one byte on the serial console.
*
**************************************************************************/
#if defined(HAVE_SERIAL) && !defined(CONFIG_LCD_CONSOLE)
void up_lowputc(char ch)
{
#ifdef HAVE_SERIALCONSOLE
/* Wait until the transmit buffer is empty */
while (!up_txready());
/* Write the data to the transmit buffer */
putreg16((uint16_t)ch, M16C_UART_BASE + M16C_UART_TB);
#endif
}
#endif
/**************************************************************************
* Name: up_lowsetup
*
* Description:
* This performs basic initialization of the UART used for the serial
* console. Its purpose is to get the console output availabe as soon
* as possible.
*
**************************************************************************/
void up_lowsetup(void)
{
/* Here we initialize the serial console early so that it can be used
* for bring-up debugging.
*/
#if defined(HAVE_SERIALCONSOLE) && !defined(CONFIG_SUPPRESS_UART_CONFIG)
up_lowserialsetup()
#endif
/* The LCD is initialized here to because it may be that the LCD is
* used for console output.
*/
#ifdef CONFIG_ARCH_LCD
up_lcdinit();
#endif
}
Reference in New Issue View Git Blame Copy Permalink