sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
8bc79f2a6a
nuttx/drivers/usbhost/usbhost_hub.c

1514 lines
48 KiB
C
Raw Blame History

/****************************************************************************
* drivers/usbhost/usbhost_hub.c
*
* Copyright (C) 2015-2017 Gregory Nutt. All rights reserved.
* Author: Kaushal Parikh <kaushal@dspworks.in>
* Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <semaphore.h>
#include <assert.h>
#include <errno.h>
#include <debug.h>
#include <nuttx/irq.h>
#include <nuttx/kmalloc.h>
#include <nuttx/arch.h>
#include <nuttx/signal.h>
#include <nuttx/wqueue.h>
#include <nuttx/clock.h>
#include <nuttx/usb/usb.h>
#include <nuttx/usb/usbhost.h>
#include <nuttx/usb/hub.h>
#include <nuttx/usb/usbhost_devaddr.h>
#ifdef CONFIG_USBHOST_HUB
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
/* Configuration ************************************************************/
/* It is necessary to perform work on the low-priority work queue (vs. the
* high priority work queue) because:
*
* 1. Deferred work requires some delays and waiting, and
* 2. There may be dependencies between the waiting and driver interrupt
* related work. Since that interrupt related work will performed on the
* high priority work queue, there would be the likelihood of deadlocks
* if you wait for events on the high priority work thread that can only
* occur if the high priority work thread is available to post those events.
*/
#if !defined(CONFIG_SCHED_WORKQUEUE)
# error Work queue support is required (CONFIG_SCHED_WORKQUEUE)
#elif !defined(CONFIG_SCHED_LPWORK)
# error Low-priority work queue support is required (CONFIG_SCHED_LPWORK)
#endif
#ifndef CONFIG_USBHOST_ASYNCH
# error Asynchronous transfer support is required (CONFIG_USBHOST_ASYNCH)
#endif
#ifndef CONFIG_USBHOST_HUB_POLLMSEC
# define CONFIG_USBHOST_HUB_POLLMSEC 400
#endif
/* Perform polling actions with a delay on the low priority work queue, if
* configured
*/
#define POLL_DELAY MSEC2TICK(CONFIG_USBHOST_HUB_POLLMSEC)
/* Used in usbhost_cfgdesc() */
#define USBHOST_IFFOUND 0x01 /* Required I/F descriptor found */
#define USBHOST_EPINFOUND 0x02 /* Required interrupt IN EP descriptor found */
#define USBHOST_ALLFOUND (USBHOST_IFFOUND | USBHOST_EPINFOUND)
/* Maximum size of an interrupt IN transfer */
#define INTIN_BUFSIZE ((USBHUB_MAX_PORTS + 8) >> 3)
/****************************************************************************
* Private Types
****************************************************************************/
/* This structure contains the internal, private state of the USB host
* hub class.
*/
struct usbhost_hubpriv_s
{
FAR struct usb_ctrlreq_s *ctrlreq; /* Allocated control request */
FAR uint8_t *buffer; /* Allocated buffer */
uint8_t ifno; /* Interface number */
uint8_t nports; /* Number of ports */
uint8_t lpsm; /* Logical power switching mode */
uint8_t ocmode; /* Over current protection mode */
uint8_t ctrlcurrent; /* Control current */
volatile bool disconnected; /* TRUE: Device has been disconnected */
bool compounddev; /* Hub is part of compound device */
bool indicator; /* Port indicator */
uint16_t pwrondelay; /* Power on wait time in ms */
sem_t exclsem; /* Used to maintain mutual exclusive access */
struct work_s work; /* Used for deferred callback work */
usbhost_ep_t intin; /* Interrupt IN endpoint */
/* Hub port descriptors */
struct usbhost_hubport_s hport[USBHUB_MAX_PORTS];
};
/* This represents the hub class structure. It must be cast compatible
* with struct usbhost_class_s.
*/
struct usbhost_hubclass_s
{
struct usbhost_class_s hubclass; /* Publicly visible class data */
struct usbhost_hubpriv_s hubpriv; /* Private class data */
};
/****************************************************************************
* Private Function Prototypes
****************************************************************************/
/* Helpers for usbhost_connect() */
static inline int usbhost_cfgdesc(FAR struct usbhost_class_s *hubclass,
FAR const uint8_t *configdesc, int desclen);
static inline int usbhost_hubdesc(FAR struct usbhost_class_s *hubclass);
static inline int usbhost_hubpwr(FAR struct usbhost_hubpriv_s *priv,
FAR struct usbhost_hubport_s *hport,
bool on);
static void usbhost_hub_event(FAR void *arg);
static void usbhost_disconnect_event(FAR void *arg);
/* (Little Endian) Data helpers */
static inline uint16_t usbhost_getle16(const uint8_t *val);
static void usbhost_putle16(uint8_t *dest, uint16_t val);
static void usbhost_callback(FAR void *arg, ssize_t nbytes);
/* struct usbhost_registry_s methods */
static FAR struct usbhost_class_s *usbhost_create(
FAR struct usbhost_hubport_s *hport,
FAR const struct usbhost_id_s *id);
/* struct usbhost_class_s methods */
static int usbhost_connect(FAR struct usbhost_class_s *hubclass,
FAR const uint8_t *configdesc, int desclen);
static int usbhost_disconnected(FAR struct usbhost_class_s *hubclass);
/****************************************************************************
* Private Data
****************************************************************************/
/* This structure provides the registry entry ID information that will be
* used to associate the USB host hub class to a connected USB hub.
*/
static const struct usbhost_id_s g_id =
{
USB_CLASS_HUB, /* base */
0, /* subclass */
0, /* proto */
0, /* vid */
0 /* pid */
};
/* This is the USB host hub class's registry entry */
static struct usbhost_registry_s g_hub =
{
NULL, /* flink */
usbhost_create, /* create */
1, /* nids */
&g_id /* id[] */
};
/****************************************************************************
* Private Functions
****************************************************************************/
/****************************************************************************
* Name: usbhost_hport_deactivate
*
* Description:
* Free a hub resource previously allocated by usbhost_hport_activate().
*
* Input Parameters:
* hport - A reference to the hub port instance to be freed.
*
* Returned Value:
* None
*
****************************************************************************/
static void usbhost_hport_deactivate(FAR struct usbhost_hubport_s *hport)
{
uinfo("Deactivating: %s port %d\n",
ROOTHUB(hport) ? "Root" : "Hub", hport->port);
/* Don't free the control pipe of root hub ports! */
if (!ROOTHUB(hport) && hport->ep0 != NULL)
{
/* Free the control endpoint */
DRVR_EPFREE(hport->drvr, hport->ep0);
hport->ep0 = NULL;
}
/* Free the function address if one has been assigned */
usbhost_devaddr_destroy(hport, hport->funcaddr);
hport->funcaddr = 0;
/* If this is a downstream hub port, then there should be no class driver
* associated wit it.
*/
DEBUGASSERT(ROOTHUB(hport) || hport->devclass == NULL);
}
/****************************************************************************
* Name: usbhost_hport_activate
*
* Description:
* Activate a hub port by assigning it a control endpoint. This actions
* only occur when a device is connected to the hub endpoint.
*
* Input Parameters:
* hport - The hub port to be activated.
*
* Returned Value:
* Zero (OK) is returned on success; a negated errno value is returned
* on any failure.
*
****************************************************************************/
static int usbhost_hport_activate(FAR struct usbhost_hubport_s *hport)
{
struct usbhost_epdesc_s epdesc;
int ret;
uinfo("Activating port %d\n", hport->port);
epdesc.hport = hport;
epdesc.addr = 0;
epdesc.in = false;
epdesc.xfrtype = USB_EP_ATTR_XFER_CONTROL;
epdesc.interval = 0;
epdesc.mxpacketsize = (hport->speed == USB_SPEED_HIGH) ? 64 : 8;
ret = DRVR_EPALLOC(hport->drvr, &epdesc, &hport->ep0);
if (ret < 0)
{
uerr("ERROR: Failed to allocate ep0: %d\n", ret);
}
return ret;
}
/****************************************************************************
* Name: usbhost_cfgdesc
*
* Description:
* This function implements the connect() method of struct
* usbhost_class_s. This method is a callback into the class
* implementation. It is used to provide the device's configuration
* descriptor to the class so that the class may initialize properly
*
* Input Parameters:
* hubclass - The USB host class instance.
* configdesc - A pointer to a uint8_t buffer container the configuration
* descriptor.
* desclen - The length in bytes of the configuration descriptor.
*
* Returned Value:
* On success, zero (OK) is returned. On a failure, a negated errno value
* is returned indicating the nature of the failure
*
* Assumptions:
* This function will *not* be called from an interrupt handler.
*
****************************************************************************/
static inline int usbhost_cfgdesc(FAR struct usbhost_class_s *hubclass,
FAR const uint8_t *configdesc, int desclen)
{
FAR struct usbhost_hubpriv_s *priv;
FAR struct usbhost_hubport_s *hport;
FAR struct usb_cfgdesc_s *cfgdesc;
FAR struct usb_desc_s *desc;
FAR struct usbhost_epdesc_s intindesc;
int remaining;
uint8_t found = 0;
int ret;
DEBUGASSERT(hubclass != NULL);
priv = &((FAR struct usbhost_hubclass_s *)hubclass)->hubpriv;
DEBUGASSERT(hubclass->hport);
hport = hubclass->hport;
DEBUGASSERT(configdesc != NULL && desclen >= sizeof(struct usb_cfgdesc_s));
/* Initialize the interrupt IN endpoint information (only to prevent
* compiler complaints)
*/
intindesc.hport = hport;
intindesc.addr = 0;
intindesc.in = true;
intindesc.xfrtype = USB_EP_ATTR_XFER_INT;
intindesc.interval = 0;
intindesc.mxpacketsize = 0;
/* Verify that we were passed a configuration descriptor */
cfgdesc = (FAR struct usb_cfgdesc_s *)configdesc;
if (cfgdesc->type != USB_DESC_TYPE_CONFIG)
{
return -EINVAL;
}
/* Get the total length of the configuration descriptor (little endian).
* It might be a good check to get the number of interfaces here too.
*/
remaining = (int)usbhost_getle16(cfgdesc->totallen);
/* Skip to the next entry descriptor */
configdesc += cfgdesc->len;
remaining -= cfgdesc->len;
/* Loop where there are more descriptors to examine */
while (remaining >= sizeof(struct usb_desc_s))
{
/* What is the next descriptor? */
desc = (FAR struct usb_desc_s *)configdesc;
switch (desc->type)
{
/* Interface descriptor. We really should get the number of endpoints
* from this descriptor too.
*/
case USB_DESC_TYPE_INTERFACE:
{
FAR struct usb_ifdesc_s *ifdesc =
(FAR struct usb_ifdesc_s *)configdesc;
uinfo("Interface descriptor\n");
DEBUGASSERT(remaining >= USB_SIZEOF_IFDESC);
/* Save the interface number and mark ONLY the interface found */
priv->ifno = ifdesc->ifno;
found = USBHOST_IFFOUND;
}
break;
/* Endpoint descriptor. Here, we expect one interrupt IN endpoints. */
case USB_DESC_TYPE_ENDPOINT:
{
FAR struct usb_epdesc_s *epdesc =
(FAR struct usb_epdesc_s *)configdesc;
uinfo("Endpoint descriptor\n");
DEBUGASSERT(remaining >= USB_SIZEOF_EPDESC);
/* Check for an interrupt endpoint. */
if ((epdesc->attr & USB_EP_ATTR_XFERTYPE_MASK) ==
USB_EP_ATTR_XFER_INT)
{
/* Yes.. it is a interrupt endpoint. IN or OUT? */
if (USB_ISEPOUT(epdesc->addr))
{
/* It is an OUT interrupt endpoint. Ignore */
uinfo("Interrupt OUT EP addr:%d mxpacketsize:%d\n",
(epdesc->addr & USB_EP_ADDR_NUMBER_MASK),
usbhost_getle16(epdesc->mxpacketsize));
}
else
{
/* It is an IN interrupt endpoint. */
found |= USBHOST_EPINFOUND;
/* Save the interrupt IN endpoint information */
intindesc.addr = epdesc->addr & USB_EP_ADDR_NUMBER_MASK;
intindesc.interval = epdesc->interval;
intindesc.mxpacketsize = usbhost_getle16(epdesc->mxpacketsize);
uinfo("Interrupt IN EP: addr=%d interval=%d mxpacketsize=%d\n",
intindesc.addr, intindesc.interval, intindesc.mxpacketsize);
}
}
}
break;
/* Other descriptors are just ignored for now */
default:
break;
}
/* If we found everything we need with this interface, then break out
* of the loop early.
*/
if (found == USBHOST_ALLFOUND)
{
break;
}
/* Increment the address of the next descriptor */
configdesc += desc->len;
remaining -= desc->len;
}
/* Sanity checking... did we find all of things that we need? */
if (found != USBHOST_ALLFOUND)
{
uerr("ERROR: Found IF=%s EPIN=%s\n",
(found & USBHOST_IFFOUND) != 0 ? "YES" : "NO",
(found & USBHOST_EPINFOUND) != 0 ? "YES" : "NO");
return -EINVAL;
}
/* We are good... Allocate the interrupt IN endpoint */
ret = DRVR_EPALLOC(hport->drvr, &intindesc, &priv->intin);
if (ret < 0)
{
uerr("ERROR: Failed to allocate Interrupt IN endpoint: %d\n", ret);
(void)DRVR_EPFREE(hport->drvr, priv->intin);
return ret;
}
uinfo("Endpoint allocated\n");
return OK;
}
/****************************************************************************
* Name: usbhost_hubdesc
*
* Description:
* This function implements the connect() method of struct
* usbhost_class_s. This method is a callback into the class
* implementation. It is used to provide the device's configuration
* descriptor to the class so that the class may initialize properly
*
* Input Parameters:
* hubclass - The USB host class instance.
*
* Returned Value:
* On success, zero (OK) is returned. On a failure, a negated errno value
* is returned indicating the nature of the failure
*
* Assumptions:
* This function will *not* be called from an interrupt handler.
*
****************************************************************************/
static inline int usbhost_hubdesc(FAR struct usbhost_class_s *hubclass)
{
FAR struct usbhost_hubpriv_s *priv;
FAR struct usbhost_hubport_s *hport;
FAR struct usb_ctrlreq_s *ctrlreq;
struct usb_hubdesc_s hubdesc;
uint16_t hubchar;
int ret;
uinfo("Read hub descriptor\n");
DEBUGASSERT(hubclass != NULL);
priv = &((FAR struct usbhost_hubclass_s *)hubclass)->hubpriv;
DEBUGASSERT(hubclass->hport);
hport = hubclass->hport;
/* Get the hub descriptor */
ctrlreq = priv->ctrlreq;
DEBUGASSERT(ctrlreq);
ctrlreq->type = USB_REQ_DIR_IN | USBHUB_REQ_TYPE_HUB;
ctrlreq->req = USBHUB_REQ_GETDESCRIPTOR;
usbhost_putle16(ctrlreq->value, (USB_DESC_TYPE_HUB << 8));
usbhost_putle16(ctrlreq->index, 0);
usbhost_putle16(ctrlreq->len, USB_SIZEOF_HUBDESC);
ret = DRVR_CTRLIN(hport->drvr, hport->ep0, ctrlreq, (FAR uint8_t *)&hubdesc);
if (ret < 0)
{
uerr("ERROR: Failed to read hub descriptor: %d\n", ret);
return ret;
}
priv->nports = hubdesc.nports;
hubchar = usbhost_getle16(hubdesc.characteristics);
priv->lpsm = (hubchar & USBHUB_CHAR_LPSM_MASK) >> USBHUB_CHAR_LPSM_SHIFT;
priv->compounddev = (hubchar & USBHUB_CHAR_COMPOUND) ? true : false;
priv->ocmode = (hubchar & USBHUB_CHAR_OCPM_MASK) >> USBHUB_CHAR_OCPM_SHIFT;
priv->indicator = (hubchar & USBHUB_CHAR_PORTIND) ? true : false;
priv->pwrondelay = (2 * hubdesc.pwrondelay);
priv->ctrlcurrent = hubdesc.ctrlcurrent;
uinfo("Hub Descriptor:\n");
uinfo(" bDescLength: %d\n", hubdesc.len);
uinfo(" bDescriptorType: 0x%02x\n", hubdesc.type);
uinfo(" bNbrPorts: %d\n", hubdesc.nports);
uinfo(" wHubCharacteristics: 0x%04x\n", usbhost_getle16(hubdesc.characteristics));
uinfo(" lpsm: %d\n", priv->lpsm);
uinfo(" compounddev: %s\n", priv->compounddev ? "TRUE" : "FALSE");
uinfo(" ocmode: %d\n", priv->ocmode);
uinfo(" indicator: %s\n", priv->indicator ? "TRUE" : "FALSE");
uinfo(" bPwrOn2PwrGood: %d\n", hubdesc.pwrondelay);
uinfo(" pwrondelay: %d\n", priv->pwrondelay);
uinfo(" bHubContrCurrent: %d\n", hubdesc.ctrlcurrent);
uinfo(" DeviceRemovable: %d\n", hubdesc.devattached);
uinfo(" PortPwrCtrlMask: %d\n", hubdesc.pwrctrlmask);
return OK;
}
/****************************************************************************
* Name: usbhost_hubpwr
*
* Description:
* Self-powered hubs may have power switches that control delivery of
* power downstream facing ports but it is not required. Bus-powered hubs
* are required to have power switches. A hub with power switches can
* switch power to all ports as a group/gang, to each port individually, or
* have an arbitrary number of gangs of one or more ports.
*
* A hub indicates whether or not it supports power switching by the
* setting of the Logical Power Switching Mode field in wHubCharacteristics.
* If a hub supports per-port power switching, then the power to a port is
* turned on when a SetPortFeature(PORT_POWER) request is received for the
* port. Port power is turned off when the port is in the Powered-off or
* Not Configured states. If a hub supports ganged power switching, then
* the power to all ports in a gang is turned on when any port in a gang
* receives a SetPortFeature(PORT_POWER) request. The power to a gang is
* not turned off unless all ports in a gang are in the Powered-off or Not
* Configured states. Note, the power to a port is not turned on by a
* SetPortFeature(PORT_POWER) if both C_HUB_LOCAL_POWER and Local Power
* Status (in wHubStatus) are set to 1B at the time when the request is
* executed and the PORT_POWER feature would be turned on.
*
* Input Parameters:
* priv - The USB hub private data
* hport - The port on the parent hub where the this hub is connected.
* on - True: enable power; false: Disable power
*
* Returned Value:
* On success, zero (OK) is returned. On a failure, a negated errno value is
* returned indicating the nature of the failure
*
* Assumptions:
* This function will *not* be called from an interrupt handler.
*
****************************************************************************/
static int usbhost_hubpwr(FAR struct usbhost_hubpriv_s *priv,
FAR struct usbhost_hubport_s *hport,
bool on)
{
FAR struct usb_ctrlreq_s *ctrlreq;
uint16_t req;
int port;
int ret;
/* Are we enabling or disabling power? */
if (on)
{
req = USBHUB_REQ_SETFEATURE;
}
else
{
req = USBHUB_REQ_CLEARFEATURE;
}
/* Enable/disable power to all downstream ports */
ctrlreq = priv->ctrlreq;
DEBUGASSERT(ctrlreq);
for (port = 1; port <= priv->nports; port++)
{
ctrlreq->type = USBHUB_REQ_TYPE_PORT;
ctrlreq->req = req;
usbhost_putle16(ctrlreq->value, USBHUB_PORT_FEAT_POWER);
usbhost_putle16(ctrlreq->index, port);
usbhost_putle16(ctrlreq->len, 0);
ret = DRVR_CTRLOUT(hport->drvr, hport->ep0, ctrlreq, NULL);
if (ret < 0)
{
uerr("ERROR: Failed to power %s port %d: %d\n",
on ? "UP" : "DOWN", port, ret);
return ret;
}
}
return OK;
}
/****************************************************************************
* Name: usbhost_hub_event
*
* Description:
* Handle a hub event.
*
* Input Parameters:
* xfer - The USB host class instance.
*
* Returned Value:
* On success, zero (OK) is returned. On a failure, a negated errno value
* is returned indicating the nature of the failure
*
* Assumptions:
* This function will *not* be called from an interrupt handler.
*
****************************************************************************/
static void usbhost_hub_event(FAR void *arg)
{
FAR struct usbhost_class_s *hubclass;
FAR struct usbhost_hubport_s *hport;
FAR struct usbhost_hubport_s *connport;
FAR struct usbhost_hubpriv_s *priv;
FAR struct usb_ctrlreq_s *ctrlreq;
struct usb_portstatus_s portstatus;
irqstate_t flags;
uint16_t status;
uint16_t change;
uint16_t mask;
uint16_t feat;
uint8_t statuschange;
int port;
int ret;
DEBUGASSERT(arg != NULL);
hubclass = (FAR struct usbhost_class_s *)arg;
priv = &((FAR struct usbhost_hubclass_s *)hubclass)->hubpriv;
/* Has the hub been disconnected? */
if (priv->disconnected)
{
uinfo("Disconnected\n");
return;
}
/* No.. then set up to process the hub event */
DEBUGASSERT(priv->ctrlreq);
ctrlreq = priv->ctrlreq;
DEBUGASSERT(hubclass->hport);
hport = hubclass->hport;
statuschange = priv->buffer[0];
uinfo("StatusChange: %02x\n", statuschange);
/* Check for status change on any port */
for (port = 1; port <= priv->nports; port++)
{
/* Check if port status has changed */
if ((statuschange & (1 << port)) == 0)
{
continue;
}
uinfo("Port %d status change\n", port);
/* Port status changed, check what happened */
statuschange &= ~(1 << port);
/* Read hub port status */
ctrlreq->type = USB_REQ_DIR_IN | USBHUB_REQ_TYPE_PORT;
ctrlreq->req = USBHUB_REQ_GETSTATUS;
usbhost_putle16(ctrlreq->value, 0);
usbhost_putle16(ctrlreq->index, port);
usbhost_putle16(ctrlreq->len, USB_SIZEOF_PORTSTS);
ret = DRVR_CTRLIN(hport->drvr, hport->ep0, ctrlreq,
(FAR uint8_t *)&portstatus);
if (ret < 0)
{
uerr("ERROR: Failed to read port %d status: %d\n", port, ret);
continue;
}
status = usbhost_getle16(portstatus.status);
change = usbhost_getle16(portstatus.change);
/* First, clear all change bits */
mask = 1;
feat = USBHUB_PORT_FEAT_CCONNECTION;
while (change)
{
if (change & mask)
{
ctrlreq->type = USBHUB_REQ_TYPE_PORT;
ctrlreq->req = USBHUB_REQ_CLEARFEATURE;
usbhost_putle16(ctrlreq->value, feat);
usbhost_putle16(ctrlreq->index, port);
usbhost_putle16(ctrlreq->len, 0);
ret = DRVR_CTRLOUT(hport->drvr, hport->ep0, ctrlreq, NULL);
if (ret < 0)
{
uerr("ERROR: Failed to clear port %d change mask %04x: %d\n",
port, mask, ret);
}
change &= (~mask);
}
mask <<= 1;
feat++;
}
change = usbhost_getle16(portstatus.change);
/* Handle connect or disconnect, no power management */
if ((change & USBHUB_PORT_STAT_CCONNECTION) != 0)
{
uint16_t debouncetime = 0;
uint16_t debouncestable = 0;
uint16_t connection = 0xffff;
uinfo("Port %d status %04x change %04x\n", port, status, change);
/* Debounce */
while (debouncetime < 1500)
{
ctrlreq->type = USB_REQ_DIR_IN | USBHUB_REQ_TYPE_PORT;
ctrlreq->req = USBHUB_REQ_GETSTATUS;
usbhost_putle16(ctrlreq->value, 0);
usbhost_putle16(ctrlreq->index, port);
usbhost_putle16(ctrlreq->len, USB_SIZEOF_PORTSTS);
ret = DRVR_CTRLIN(hport->drvr, hport->ep0, ctrlreq,
(FAR uint8_t *)&portstatus);
if (ret < 0)
{
uerr("ERROR: Failed to get port %d status: %d\n", port, ret);
break;
}
status = usbhost_getle16(portstatus.status);
change = usbhost_getle16(portstatus.change);
if ((change & USBHUB_PORT_STAT_CCONNECTION) == 0 &&
(status & USBHUB_PORT_STAT_CONNECTION) == connection)
{
debouncestable += 25;
if (debouncestable >= 100)
{
uinfo("Port %d debouncestable=%d\n", port, debouncestable);
break;
}
}
else
{
debouncestable = 0;
connection = status & USBHUB_PORT_STAT_CONNECTION;
}
if ((change & USBHUB_PORT_STAT_CCONNECTION) != 0)
{
ctrlreq->type = USBHUB_REQ_TYPE_PORT;
ctrlreq->req = USBHUB_REQ_CLEARFEATURE;
usbhost_putle16(ctrlreq->value, USBHUB_PORT_FEAT_CCONNECTION);
usbhost_putle16(ctrlreq->index, port);
usbhost_putle16(ctrlreq->len, 0);
(void)DRVR_CTRLOUT(hport->drvr, hport->ep0, ctrlreq, NULL);
}
debouncetime += 25;
nxsig_usleep(25*1000);
}
if (ret < 0 || debouncetime >= 1500)
{
uerr("ERROR: Failed to debounce port %d: %d\n", port, ret);
continue;
}
if ((status & USBHUB_PORT_STAT_CONNECTION) != 0)
{
/* Device connected to a port on the hub */
uinfo("Connection on port %d\n", port);
ctrlreq->type = USBHUB_REQ_TYPE_PORT;
ctrlreq->req = USBHUB_REQ_SETFEATURE;
usbhost_putle16(ctrlreq->value, USBHUB_PORT_FEAT_RESET);
usbhost_putle16(ctrlreq->index, port);
usbhost_putle16(ctrlreq->len, 0);
ret = DRVR_CTRLOUT(hport->drvr, hport->ep0, ctrlreq, NULL);
if (ret < 0)
{
uerr("ERROR: Failed to reset port %d: %d\n", port, ret);
continue;
}
nxsig_usleep(100*1000);
ctrlreq->type = USB_REQ_DIR_IN | USBHUB_REQ_TYPE_PORT;
ctrlreq->req = USBHUB_REQ_GETSTATUS;
usbhost_putle16(ctrlreq->value, 0);
usbhost_putle16(ctrlreq->index, port);
usbhost_putle16(ctrlreq->len, USB_SIZEOF_PORTSTS);
ret = DRVR_CTRLIN(hport->drvr, hport->ep0, ctrlreq,
(FAR uint8_t *)&portstatus);
if (ret < 0)
{
uerr("ERROR: Failed to get port %d status: %d\n", port, ret);
continue;
}
status = usbhost_getle16(portstatus.status);
change = usbhost_getle16(portstatus.change);
uinfo("port %d status %04x change %04x after reset\n",
port, status, change);
if ((status & USBHUB_PORT_STAT_RESET) == 0 &&
(status & USBHUB_PORT_STAT_ENABLE) != 0)
{
if ((change & USBHUB_PORT_STAT_CRESET) != 0)
{
ctrlreq->type = USBHUB_REQ_TYPE_PORT;
ctrlreq->req = USBHUB_REQ_CLEARFEATURE;
usbhost_putle16(ctrlreq->value, USBHUB_PORT_FEAT_CRESET);
usbhost_putle16(ctrlreq->index, port);
usbhost_putle16(ctrlreq->len, 0);
(void)DRVR_CTRLOUT(hport->drvr, hport->ep0, ctrlreq, NULL);
}
connport = &priv->hport[port];
if ((status & USBHUB_PORT_STAT_HIGH_SPEED) != 0)
{
connport->speed = USB_SPEED_HIGH;
}
else if ((status & USBHUB_PORT_STAT_LOW_SPEED) != 0)
{
connport->speed = USB_SPEED_LOW;
}
else
{
connport->speed = USB_SPEED_FULL;
}
/* Activate the hub port by assigning it a control endpoint. */
ret = usbhost_hport_activate(connport);
if (ret < 0)
{
uerr("ERROR: usbhost_hport_activate failed: %d\n", ret);
}
else
{
/* Inform waiters that a new device has been connected */
ret = DRVR_CONNECT(connport->drvr, connport, true);
if (ret < 0)
{
uerr("ERROR: DRVR_CONNECT failed: %d\n", ret);
usbhost_hport_deactivate(connport);
}
}
}
else
{
uerr("ERROR: Failed to enable port %d\n", port);
continue;
}
}
else
{
/* Device disconnected from a port on the hub. Release port
* resources.
*/
uinfo("Disconnection on port %d\n", port);
/* Free any devices classes connect on this hub port */
connport = &priv->hport[port];
if (connport->devclass != NULL)
{
CLASS_DISCONNECTED(connport->devclass);
connport->devclass = NULL;
}
/* Free any resources used by the hub port */
usbhost_hport_deactivate(connport);
}
}
else if (change)
{
uwarn("WARNING: status %04x change %04x not handled\n", status, change);
}
}
/* Check for hub status change */
if ((statuschange & 1) != 0)
{
/* Hub status changed */
uwarn("WARNING: Hub status changed, not handled\n");
}
/* The preceding sequence of events may take a significant amount of
* time and it is possible that the hub may have been removed while this
* logic operated. In any event, we will get here after several failures.
* But we do not want to schedule another hub event if the hub has been
* removed.
*/
flags = enter_critical_section();
if (!priv->disconnected)
{
/* Wait for the next hub event */
ret = DRVR_ASYNCH(hport->drvr, priv->intin, (FAR uint8_t *)priv->buffer,
INTIN_BUFSIZE, usbhost_callback, hubclass);
if (ret < 0)
{
uerr("ERROR: Failed to queue interrupt endpoint: %d\n", ret);
}
}
leave_critical_section(flags);
}
/****************************************************************************
* Name: usbhost_disconnect_event
*
* Description:
* This function performs the disconnect() actions on the worker thread.
* This work was scheduled when by the usbhost_disconnected() method after
* the HCD informs use that the device has been disconnected.
*
* Input Parameters:
* class - The USB host class entry previously obtained from a call to
* create().
*
* Returned Value:
* On success, zero (OK) is returned. On a failure, a negated errno value
* is returned indicating the nature of the failure
*
* Assumptions:
* Probably called from an interrupt handler.
*
****************************************************************************/
static void usbhost_disconnect_event(FAR void *arg)
{
FAR struct usbhost_class_s *hubclass = (FAR struct usbhost_class_s *)arg;
FAR struct usbhost_hubpriv_s *priv;
FAR struct usbhost_hubport_s *hport;
FAR struct usbhost_hubport_s *child;
irqstate_t flags;
int port;
uinfo("Disconnecting\n");
DEBUGASSERT(hubclass != NULL && hubclass->hport != NULL);
priv = &((FAR struct usbhost_hubclass_s *)hubclass)->hubpriv;
hport = hubclass->hport;
uinfo("Destroying hub on port %d\n", hport->port);
/* Set an indication to any users of the device that the device is no
* longer available.
*/
flags = enter_critical_section();
/* Cancel any pending transfers on the interrupt IN pipe */
DRVR_CANCEL(hport->drvr, priv->intin);
/* Cancel any pending port status change events */
work_cancel(LPWORK, &priv->work);
/* Disable power to all downstream ports */
(void)usbhost_hubpwr(priv, hport, false);
/* Free the allocated control request */
DRVR_FREE(hport->drvr, (FAR uint8_t *)priv->ctrlreq);
/* Free buffer for status change (INT) endpoint */
DRVR_IOFREE(hport->drvr, priv->buffer);
/* Destroy the interrupt IN endpoint */
DRVR_EPFREE(hport->drvr, priv->intin);
/* Release per-port resources */
for (port = 0; port < USBHUB_MAX_PORTS; port++)
{
/* Free any devices classes connect on this hub port */
child = &priv->hport[port];
if (child->devclass != NULL)
{
CLASS_DISCONNECTED(child->devclass);
child->devclass = NULL;
}
/* Free any resources used by the hub port */
usbhost_hport_deactivate(child);
}
/* Deactivate the parent hub port (unless it is the root hub port) */
usbhost_hport_deactivate(hport);
/* Destroy the semaphores */
nxsem_destroy(&priv->exclsem);
/* Disconnect the USB host device */
DRVR_DISCONNECT(hport->drvr, hport);
/* Free the class instance */
kmm_free(hubclass);
hport->devclass = NULL;
leave_critical_section(flags);
}
/****************************************************************************
* Name: usbhost_getle16
*
* Description:
* Get a (possibly unaligned) 16-bit little endian value.
*
* Input Parameters:
* val - A pointer to the first byte of the little endian value.
*
* Returned Value:
* A uint16_t representing the whole 16-bit integer value
*
****************************************************************************/
static inline uint16_t usbhost_getle16(const uint8_t *val)
{
return (uint16_t)val[1] << 8 | (uint16_t)val[0];
}
/****************************************************************************
* Name: usbhost_putle16
*
* Description:
* Put a (possibly unaligned) 16-bit little endian value.
*
* Input Parameters:
* dest - A pointer to the first byte to save the little endian value.
* val - The 16-bit value to be saved.
*
* Returned Value:
* None
*
****************************************************************************/
static void usbhost_putle16(uint8_t *dest, uint16_t val)
{
dest[0] = val & 0xff; /* Little endian means LS byte first in byte stream */
dest[1] = val >> 8;
}
/****************************************************************************
* Name: usbhost_callback
*
* Description:
* Handle end of transfer callback.
*
* Input Parameters:
* arg - The argument provided with the asynchronous I/O was setup
* nbytes - The number of bytes actually transferred (or a negated errno
* value;
*
* Returned Value:
* None
*
* Assumptions:
* Probably called from an interrupt handler.
*
****************************************************************************/
static void usbhost_callback(FAR void *arg, ssize_t nbytes)
{
FAR struct usbhost_class_s *hubclass;
FAR struct usbhost_hubpriv_s *priv;
uint32_t delay = 0;
DEBUGASSERT(arg != NULL);
hubclass = (FAR struct usbhost_class_s *)arg;
priv = &((FAR struct usbhost_hubclass_s *)hubclass)->hubpriv;
/* Check for a failure. On higher end host controllers, the asynchronous
* transfer will pend until data is available (OHCI and EHCI). On lower
* end host controllers (like STM32 and EFM32), the transfer will fail
* immediately when the device NAKs the first attempted interrupt IN
* transfer (with nbytes == -EAGAIN). In that case (or in the case of
* other errors), we must fall back to polling.
*/
if (nbytes < 0)
{
/* This debug output is good to know, but really a nuisance for
* those configurations where we have to fall back to polling.
* FIX: Don't output the message is the result is -EAGAIN.
*/
#if defined(CONFIG_DEBUG_USB) && !defined(CONFIG_DEBUG_INFO)
if (nbytes != -EAGAIN)
#endif
{
uerr("ERROR: Transfer failed: %d\n", (int)nbytes);
}
/* Indicate there there is nothing to do. So when the work is
* performed, nothing will happen other than we will set to receive
* the next event.
*/
priv->buffer[0] = 0;
/* We don't know the nature of the failure, but we need to do all that
* we can do to avoid a CPU hog error loop.
*
* Use the low-priority work queue and delay polling for the next
* event. We want to use as little CPU bandwidth as possible in this
* case.
*/
delay = POLL_DELAY;
}
/* The work structure should always be available since hub communications
* are serialized. However, there is a remote chance that this may
* collide with a hub disconnection event.
*/
if (work_available(&priv->work) && !priv->disconnected)
{
(void)work_queue(LPWORK, &priv->work, (worker_t)usbhost_hub_event,
hubclass, delay);
}
}
/****************************************************************************
* struct usbhost_registry_s methods
****************************************************************************/
/****************************************************************************
* Name: usbhost_create
*
* Description:
* This function implements the create() method of struct usbhost_registry_s.
* The create() method is a callback into the class implementation. It is
* used to (1) create a new instance of the USB host class state and to (2)
* bind a USB host driver "session" to the class instance. Use of this
* create() method will support environments where there may be multiple
* USB ports and multiple USB devices simultaneously connected.
*
* Input Parameters:
* hport - The hub port that manages the new class instance.
* id - In the case where the device supports multiple base classes,
* subclasses, or protocols, this specifies which to configure for.
*
* Returned Value:
* On success, this function will return a non-NULL instance of struct
* usbhost_class_s that can be used by the USB host driver to communicate
* with the USB host class. NULL is returned on failure; this function
* will fail only if the hport input parameter is NULL or if there are
* insufficient resources to create another USB host class instance.
*
****************************************************************************/
static FAR struct usbhost_class_s *
usbhost_create(FAR struct usbhost_hubport_s *hport,
FAR const struct usbhost_id_s *id)
{
FAR struct usbhost_hubclass_s *alloc;
FAR struct usbhost_class_s *hubclass;
FAR struct usbhost_hubpriv_s *priv;
size_t maxlen;
int port;
int ret;
/* Allocate a USB host class instance */
alloc = kmm_zalloc(sizeof(struct usbhost_hubclass_s));
if (alloc == NULL)
{
return NULL;
}
/* Initialize the public class structure */
hubclass = &alloc->hubclass;
hubclass->hport = hport;
hubclass->connect = usbhost_connect;
hubclass->disconnected = usbhost_disconnected;
/* Initialize the private class structure */
priv = &alloc->hubpriv;
/* Allocate memory for control requests */
ret = DRVR_ALLOC(hport->drvr, (FAR uint8_t **)&priv->ctrlreq, &maxlen);
if (ret < 0)
{
uerr("ERROR: DRVR_ALLOC failed: %d\n", ret);
goto errout_with_hub;
}
/* Allocate buffer for status change (INT) endpoint. */
ret = DRVR_IOALLOC(hport->drvr, &priv->buffer, INTIN_BUFSIZE);
if (ret < 0)
{
uerr("ERROR: DRVR_IOALLOC failed: %d\n", ret);
goto errout_with_ctrlreq;
}
/* Initialize semaphores (this works okay in the interrupt context) */
nxsem_init(&priv->exclsem, 0, 1);
/* Initialize per-port data */
for (port = 0; port < USBHUB_MAX_PORTS; port++)
{
FAR struct usbhost_hubport_s *child;
/* Initialize the hub port descriptor */
child = &priv->hport[port];
memset(child, 0, sizeof(struct usbhost_hubport_s));
child->drvr = hport->drvr;
child->parent = hport;
child->port = port;
child->speed = USB_SPEED_FULL;
}
return hubclass;
errout_with_ctrlreq:
kmm_free(priv->ctrlreq);
errout_with_hub:
kmm_free(priv);
return NULL;
}
/****************************************************************************
* struct usbhost_class_s methods
****************************************************************************/
/****************************************************************************
* Name: usbhost_connect
*
* Description:
* This function implements the connect() method of struct
* usbhost_class_s. This method is a callback into the class
* implementation. It is used to provide the device's configuration
* descriptor to the class so that the class may initialize properly
*
* Input Parameters:
* class - The USB host class entry previously obtained from a call to
* create().
* configdesc - A pointer to a uint8_t buffer container the configuration
* descriptor.
* desclen - The length in bytes of the configuration descriptor.
*
* Returned Value:
* On success, zero (OK) is returned. On a failure, a negated errno value is
* returned indicating the nature of the failure
*
* NOTE that the class instance remains valid upon return with a failure. It is
* the responsibility of the higher level enumeration logic to call
* CLASS_DISCONNECTED to free up the class driver resources.
*
* Assumptions:
* - This function will *not* be called from an interrupt handler.
* - If this function returns an error, the USB host controller driver
* must call to DISCONNECTED method to recover from the error
*
****************************************************************************/
static int usbhost_connect(FAR struct usbhost_class_s *hubclass,
FAR const uint8_t *configdesc, int desclen)
{
FAR struct usbhost_hubpriv_s *priv;
FAR struct usbhost_hubport_s *hport;
int ret;
DEBUGASSERT(hubclass != NULL);
priv = &((FAR struct usbhost_hubclass_s *)hubclass)->hubpriv;
DEBUGASSERT(hubclass->hport);
hport = hubclass->hport;
DEBUGASSERT(configdesc != NULL && desclen >= sizeof(struct usb_cfgdesc_s));
/* Parse the configuration descriptor to get the endpoints */
ret = usbhost_cfgdesc(hubclass, configdesc, desclen);
if (ret < 0)
{
uerr("ERROR: Failed to parse config descriptor: %d\n", ret);
return ret;
}
/* Read the hub descriptor */
ret = usbhost_hubdesc(hubclass);
if (ret < 0)
{
return ret;
}
if (priv->nports > USBHUB_MAX_PORTS)
{
uerr("ERROR: too many downstream ports: %d\n", priv->nports);
return -ENOSYS;
}
/* Enable power to all downstream ports */
ret = usbhost_hubpwr(priv, hport, true);
if (ret < 0)
{
uerr("ERROR: usbhost_hubpwr failed: %d\n", ret);
return ret;
}
/* Begin monitoring of port status change events */
ret = DRVR_ASYNCH(hport->drvr, priv->intin, (FAR uint8_t *)priv->buffer,
INTIN_BUFSIZE, usbhost_callback, hubclass);
if (ret < 0)
{
uerr("ERROR: DRVR_ASYNCH failed: %d\n", ret);
(void)usbhost_hubpwr(priv, hport, false);
}
return ret;
}
/****************************************************************************
* Name: usbhost_disconnected
*
* Description:
* This function implements the disconnected() method of struct
* usbhost_class_s. This method is a callback into the class
* implementation. It is used to inform the class that the USB device has
* been disconnected.
*
* Input Parameters:
* class - The USB host class entry previously obtained from a call to
* create().
*
* Returned Value:
* On success, zero (OK) is returned. On a failure, a negated errno value
* is returned indicating the nature of the failure
*
* Assumptions:
* Probably called from an interrupt handler.
*
****************************************************************************/
static int usbhost_disconnected(struct usbhost_class_s *hubclass)
{
FAR struct usbhost_hubpriv_s *priv;
irqstate_t flags;
int ret;
uinfo("Disconnected\n");
/* Execute the disconnect action from the worker thread. */
DEBUGASSERT(hubclass != NULL);
priv = &((FAR struct usbhost_hubclass_s *)hubclass)->hubpriv;
/* Mark the driver disconnected. This will cause the callback to ignore
* any subsequent completions of asynchronous transfers.
*/
flags = enter_critical_section();
priv->disconnected = true;
/* Cancel any pending work. There may be pending HUB work associated with
* hub interrupt pipe events. That work may be lost by this action.
*/
(void)work_cancel(LPWORK, &priv->work);
/* Schedule the disconnection work */
ret = work_queue(LPWORK, &priv->work,
(worker_t)usbhost_disconnect_event, hubclass, 0);
leave_critical_section(flags);
return ret;
}
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: usbhost_hub_initialize
*
* Description:
* Initialize the USB hub class. This function should be called
* be platform-specific code in order to initialize and register support
* for the USB host storage class.
*
* Input Parameters:
* None
*
* Returned Value:
* On success this function will return zero (OK); A negated errno value
* will be returned on failure.
*
****************************************************************************/
int usbhost_hub_initialize(void)
{
/* Advertise our availability to support (certain) mass storage devices */
return usbhost_registerclass(&g_hub);
}
#endif /* CONFIG_USBHOST_HUB */
Reference in New Issue View Git Blame Copy Permalink