README.txt
==========
Z20X is a simple expandable DIY computing system, built around the eZ80
microprocessor. The eZ80 was chosen due to its native simplicity and full
backward code compatibility with the great and very popular Z80 and Z180.
The design goal of Z20X is to offer a good DIY/LIY (Do-It-Yourself/Learn-
It-Yourself) kit for system built with through-hole components, simple
enough for assembly and learning in deep details, but without the
constraints of using only old technology ICs. In order to maintain full
exposure to technical details, the system also avoids using secondary
MCUs or programmable logic, and sticks only with true hardware solutions.
System Summary
eZ80 running at 20 MHz (default on board)
128 KB flash ROM (internal for eZ80)
520 KB total RAM on board (512K external plus 8K internal)
4 MB non-volatile storage (optional, can be upgraded by changing the IC)
Real-time clock
SSD1963-powered 7.0 inch TFT display with resolution 800 x 480 pixels
and touch panel
SD card slot
YM2413 programmable sound generator with amplifier
PS/2 connectors for industry standard keyboard and mouse
Additionally installable processor modules
72-pin expansion header with Z20X bus
Optional expander board with Z20X bus sockets and bonus support for
RC2014 bus
Contents
========
o ZDS-II Compiler Versions
o Environments
o Memory Constaints
o Serial Console
o LEDs and Buttons
- LEDs
- Buttons
o Configurations
- Common Configuration Notes
- Configuration Subdirectories
ZDS-II Compiler Versions
========================
Version 5.3.3
As of this writing, this is the latest version available. This is the
default configured for all ez80 boards.
Compilation using version 5.3.3 was verified on February 20, 2020.
Version 5.3.0
Compilation using version 5.3.0 was verified on February 19, 2020.
Other Versions
If you use any version of ZDS-II other than 5.3.0/3 or if you install ZDS-II
at any location other than the default location, you will have to modify
three files: (1) arch/arm/z80/src/ez80/Kconfig, (2)
boards/z80/ez80/z20x/scripts/Make.defs and, perhaps, (3)
arch/z80/src/ez80/Toolchain.defs.
Environments
============
Cygwin:
All testing was done using the Cygwin environment under Windows.
MinGW/MSYS
One attempt was made using the MSYS2 environment under Windws. That build
correctly until the very end, then it failed to include "chip.h". this
was traced to arch/z80/src/Makefile.zdsiil: The usrinc paths created by
Makefile.zdsiil contained POSIX-style paths that were not usable to the
ZDS-II compiler.
Native
The Windows native build has not been attempt. I would expect that it
would have numerous problems.
Memory Constaints
=================
The eZ80F92 has a smaller FLASH memory of 128Kb. That combined with the
fact that the size of NuttX is increasing means that it is very easy to
exceed the ROM address space.
The sdboot configuration will fit into the ROM address space, but NOT if
you enable assertions, debug outputs, or even debug symbols. It is very
unlikely that the nsh_flash configuration will fit into FLASH at all!
Serial Console
==============
The eZ80 has two UART peripherals:
UART 0: All of Port D pins can support UART0 functions when configured
for the alternate function 7. For typical configurations only RXD and TXD
need be configured.
eZ80 PIN
===============
PD0/TXD0/IR_IXD
PD1/RXD0/IR_RXD
PD2/RTS0
PD3/CTS0
PD4/DTR0
PD5/DSR0
PD6/DCD0
PD7/RIO0
PD0 and PD1 connect to the PS/2 keyboard connector.
UART 1: All of Port C pins can support UART1 functions when configured
for the alternate function 7. For typical configurations only RXD and TXD
need be configured.
eZ80 PIN
========
PC0/TXD1
PC1/RXD1
PC2/RTS1
PC3/CTS1
PC4/DTR1
PC5/DSR1
PC6/DCD1
PC7/RIO1
PC0 and PC1 connect both to the MCP2221 UART-to-USB converter and also to
the PS/2 mouse connector.
UART1 is the default serial console in all configurations unless
otherwise noted in the description of the configuration.
LEDs and Buttons
================
There are no on-board user LEDs or buttons.
Configurations
==============
Common Configuration Notes
--------------------------
1. src/ and include/
These directories contain common logic for all z20x
configurations.
2. Variations on the basic z20x configuration are maintained
in subdirectories. To configure any specific configuration, do the
following steps:
tools/configure.sh [OPTIONS] z20x:<sub-directory>
make
Where <sub-directory> is the specific board configuration that you
wish to build. Use 'tools/configure.sh -h' to see the possible
options. Typical options are:
-l Configure for a Linux host
-c Configure for a Windows Cygwin host
-g Configure for a Windows MYS2 host
Use configure.bat instead of configure.sh if you are building in a
native Windows environment.
The available board-specific configurations are summarized in the
following paragraphs.
When the build completes successfully, you will find this files in
the top level nuttx directory:
a. nuttx.hex - A loadable file in Intel HEX format
b. nuttx.lod - A loadable file in ZDS-II binary format
c. nuttx.map - A linker map file
3. ZDS-II make be used to write the nuttx.lod file to FLASH. General
instructions:
a. Start ZDS-II
b. Open the project, for example, nsh/nsh.zdsproj
c. Select Debug->Connect To Target
d. Select Debug->Download code
There are projects for the ZiLOG Smart Flash Programmer as well but
these are not functional as of this writing.
4. This configuration uses the mconf-based configuration tool. To
change this configurations using that tool, you should:
a. Build and install the kconfig-mconf tool. See nuttx/README.txt
see additional README.txt files in the NuttX tools repository.
b. Execute 'make menuconfig' in nuttx/ in order to start the
reconfiguration process.
Configuration Subdirectories
----------------------------
nsh_flash, nsh_ram:
These configuration build the NuttShell (NSH). That code can be
found in apps/system/nsh and apps/system/nshlib.. For more
information see: apps/system/nsh/README.txt and
Documentation/NuttShell.html.
UNVERIFIED! I doubt that the nsh_flash program will fit into the
smaller FLASH memory of the eZ80F92 part.
NOTES:
1. The two configurations different only in that one builds for
execution entirely from FLASH and the other for execution entirely
from RAM. A bootloader of some kind is required to support such
execution from RAM! This difference is reflected in a single
configuration setting:
CONFIG_BOOT_RUNFROMFLASH=y # Execute from flash (default)
CONFIG_BOOT_RUNFROMEXTSRAM=y # Execute from external SRAM
A third configuration is possible but not formalized with its own
defconfig file: You can also configure the code to boot from FLASH,
copy the code to external SRAM, and then execute from RAM. Such a
configuration needs the following settings in the .config file:
CONFIG_BOOT_RUNFROMEXTSRAM=y # Execute from external SRAM
CONFIG_Z20X_COPYTORAM=y # Boot from FLASH but copy to SRAM
Why execute from SRAM at all? Because you will get MUCH better
performance because of the zero wait state SRAM implementation.
2. The eZ80 RTC, the procFS file system, and SD card support in included.
The procFS file system will be auto-mounted at /proc when the board
boots.
The RTC can be read and set from the NSH date command.
nsh> date
Thu, Dec 19 20:53:29 2086
nsh> help date
date usage: date [-s "MMM DD HH:MM:SS YYYY"]
nsh> date -s "Jun 16 15:09:00 2019"
nsh> date
Sun, Jun 16 15:09:01 2019
When the system boots, it will probe the SD card and create a
block driver called mmcsd0:
nsh> ls /dev
/dev:
console
mmcsd0
null
ttyS0
nsh> mount
/proc type procfs
The SD card can be mounted with the following NSH mount command:
nsh> mount -t vfat /dev/mmcsd0 /mnt/sdcard
nsh> ls /mnt
/mnt:
sdcard/
nsh> mount
/mnt/sdcard type vfat
/proc type procfs
nsh> ls -lR /mnt/sdcard
/mnt/sdcard:
drw-rw-rw- 0 System Volume Information/
/mnt/sdcard/System Volume Information:
-rw-rw-rw- 76 IndexerVolumeGuid
-rw-rw-rw- 12 WPSettings.dat
You can they use the SD card as any other file system.
nsh> ls /mnt/sdcard
/mnt/sdcard:
System Volume Information/
nsh> echo "This is a test" >/mnt/sdcard/atest.txt
nsh> ls /mnt/sdcard
/mnt/sdcard:
System Volume Information/
atest.txt
nsh> cat /mnt/sdcard/atest.txt
This is a test
Don't forget to un-mount the volume before power cycling:
nsh> mount
/mnt/sdcard type vfat
/proc type procfs
nsh> umount /mnt/sdcard
nsh> mount
/proc type procfs
NOTE: The is no card detect signal so the microSD card must be
placed in the card slot before the system is started.
3. Debugging the RAM version
You can debug the all RAM version using ZDS-II as follows:
a. Connect to the debugger,
b. Reset, Go, and Break. This will initialize the external RAM
c. Break and Load the nuttx.lod file
c. Set the PC to 0x040000
d. Single step a few times to make sure things look good, then
e. Go
4. Optimizations:
- The stack sizes have not been tuned and, hence, are probably too
large.
sdboot
This configuration implements a very simple boot loader. In runs from
FLASH and simply initializes the external SRAM, mounts the FAT file
system on the SD card, and checks to see if there is a file called
nuttx.hex on the SD card. If so, it will load the Intel HEX file into
memory and jump to address 0x040000. This, of course, assumes that
the application's reset vector resides at address 0x040000 in external
SRAM.
The boot loader source is located at boards/z20x/src/sd_main.c.
8c00e43c1a