nuttx/boards/arm/lpc2378/olimex-lpc2378
2021-06-10 03:43:18 -07:00
..
configs/nsh fs: delete NFILE_DESCRIPTORS for allocating dynamically 2021-03-17 06:46:42 -07:00
include
scripts Make: use gcc as LD 2021-06-10 03:43:18 -07:00
src
Kconfig
README.txt Change all 'Nuttx' to 'NuttX' 2020-10-20 01:45:06 -07:00

There's not much here:

EXT1 - P3 0:7 are used for LEDs.

UEXT pin 3/4 -TXD2/RXD2- is UART2.

The board I have has the revision '-' of LPC2378 even though I got the board
more than 2 years after the chip revision was released :-( .
I can't get NuttX to work if I fully enabled the MAM.

I used FTDI ft232 usb-serial with nsh piping as seen on the screenshot.