sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
8f959373e1
nuttx/arch/arm/src/stm32/stm32_rtc.h

219 lines
7.3 KiB
C
Raw Blame History

/****************************************************************************
* arch/arm/src/stm32/stm32_rtc.h
*
* Copyright (C) 2011 Uros Platise. All rights reserved.
* Copyright (C) 2011-2013, 2015 Gregory Nutt. All rights reserved.
* Author: Uros Platise <uros.platise@isotel.eu> (Original for the F1)
* Gregory Nutt <gnutt@nuttx.org> (On-going support and development)
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#ifndef __ARCH_ARM_SRC_STM32_STM32_RTC_H
#define __ARCH_ARM_SRC_STM32_STM32_RTC_H
#include <nuttx/config.h>
#include "chip.h"
/* The STM32 F1 has a simple battery-backed counter for its RTC and has a separate
* block for the BKP registers.
*/
#if defined(CONFIG_STM32_STM32F10XX)
# include "chip/stm32_rtc.h"
# include "chip/stm32_bkp.h"
/* The other families use a more traditional Realtime Clock/Calendar (RTCC) with
* broken-out data/time in BCD format. The backup registers are integrated into
* the RTCC in these families.
*/
#elif defined(CONFIG_STM32_STM32L15XX) || defined(CONFIG_STM32_STM32F20XX) || \
defined(CONFIG_STM32_STM32F30XX) || defined(CONFIG_STM32_STM32F40XX)
# include "chip/stm32_rtcc.h"
#endif
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
#define STM32_RTC_PRESCALER_SECOND 32767 /* Default prescaler to get a second base */
#define STM32_RTC_PRESCALER_MIN 1 /* Maximum speed of 16384 Hz */
/****************************************************************************
* Public Types
****************************************************************************/
#ifndef __ASSEMBLY__
/* The form of an alarm callback */
typedef CODE void (*alarmcb_t)(void);
/****************************************************************************
* Public Data
****************************************************************************/
#undef EXTERN
#if defined(__cplusplus)
#define EXTERN extern "C"
extern "C"
{
#else
#define EXTERN extern
#endif
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: stm32_rtc_getdatetime_with_subseconds
*
* Description:
* Get the current date and time from the date/time RTC. This interface
* is only supported by the date/time RTC hardware implementation.
* It is used to replace the system timer. It is only used by the RTOS
* during initialization to set up the system time when CONFIG_RTC and
* CONFIG_RTC_DATETIME are selected (and CONFIG_RTC_HIRES is not).
*
* NOTE: Some date/time RTC hardware is capability of sub-second accuracy.
* Thatsub-second accuracy is returned through 'nsec'.
*
* Input Parameters:
* tp - The location to return the high resolution time value.
* nsec - The location to return the subsecond time value.
*
* Returned Value:
* Zero (OK) on success; a negated errno on failure
*
****************************************************************************/
#ifdef CONFIG_STM32_HAVE_RTC_SUBSECONDS
int stm32_rtc_getdatetime_with_subseconds(FAR struct tm *tp, FAR long *nsec);
#endif
/****************************************************************************
* Name: stm32_rtc_setdatetime
*
* Description:
* Set the RTC to the provided time. RTC implementations which provide
* up_rtc_getdatetime() (CONFIG_RTC_DATETIME is selected) should provide
* this function.
*
* Input Parameters:
* tp - the time to use
*
* Returned Value:
* Zero (OK) on success; a negated errno on failure
*
****************************************************************************/
#ifdef CONFIG_RTC_DATETIME
struct tm;
int stm32_rtc_setdatetime(FAR const struct tm *tp);
#endif
/****************************************************************************
* Name: stm32_rtc_setalarm
*
* Description:
* Set up an alarm.
*
* Input Parameters:
* tp - the time to set the alarm
* callback - the function to call when the alarm expires.
*
* Returned Value:
* Zero (OK) on success; a negated errno on failure
*
****************************************************************************/
#ifdef CONFIG_RTC_ALARM
struct timespec;
int stm32_rtc_setalarm(FAR const struct timespec *tp, alarmcb_t callback);
#endif
/****************************************************************************
* Name: stm32_rtc_cancelalarm
*
* Description:
* Cancel a pending alarm alarm
*
* Input Parameters:
* none
*
* Returned Value:
* Zero (OK) on success; a negated errno on failure
*
****************************************************************************/
#ifdef CONFIG_RTC_ALARM
int stm32_rtc_cancelalarm(void);
#endif
/****************************************************************************
* Name: stm32_rtc_lowerhalf
*
* Description:
* Instantiate the RTC lower half driver for the STM32. General usage:
*
* #include <nuttx/timers/rtc.h>
* #include "stm32_rtc.h>
*
* struct rtc_lowerhalf_s *lower;
* lower = stm32_rtc_lowerhalf();
* rtc_initialize(0, lower);
*
* Input Parameters:
* None
*
* Returned Value:
* On success, a non-NULL RTC lower interface is returned. NULL is
* returned on any failure.
*
****************************************************************************/
#ifdef CONFIG_RTC_DRIVER
struct rtc_lowerhalf_s;
FAR struct rtc_lowerhalf_s *stm32_rtc_lowerhalf(void);
#endif
#undef EXTERN
#if defined(__cplusplus)
}
#endif
#endif /* __ASSEMBLY__ */
#endif /* __ARCH_ARM_SRC_STM32_STM32_RTC_H */
Reference in New Issue View Git Blame Copy Permalink