8e30c13441
This PR adds support for the SOPHGO SG2000 SoC, based on T-Head C906 64-bit RISC-V Core. This will be used by the upcoming port of NuttX for Milk-V Duo S SBC. Most of the code was derived from NuttX for Ox64 BL808. The source files are explained in the articles here: https://github.com/lupyuen/nuttx-sg2000 Modified Files in arch/risc-v: `Kconfig`: Added ARCH_CHIP_SG2000 for SG2000 SoC New Files in arch/risc-v: `include/sg2000/chip.h`: SG2000 Definitions `include/sg2000/irq.h`: External Interrupts `src/sg2000/chip.h`: Interrupt Stack Macro `src/sg2000/sg2000_allocateheap.c`: Kernel Heap `src/sg2000/sg2000_head.S`: Linux Header and Boot Code `src/sg2000/sg2000_irq.c`: Configure Interrupts `src/sg2000/sg2000_irq_dispatch.c`: Dispatch Interrupts `src/sg2000/sg2000_memorymap.h`: Memory Map `src/sg2000/sg2000_mm_init.c`, `sg2000_mm_init.h`: Memory Mgmt `src/sg2000/sg2000_pgalloc.c`: Page Allocator `src/sg2000/sg2000_start.c`: Startup Code `src/sg2000/sg2000_timerisr.c`: Timer Interrupt `src/sg2000/hardware/sg2000_memorymap.h`: PLIC and UART Base Address `src/sg2000/hardware/sg2000_plic.h`: PLIC Register Addresses `src/sg2000/Kconfig`: SG2000 Config `src/sg2000/Make.defs`: Makefile
685 lines
17 KiB
Plaintext
685 lines
17 KiB
Plaintext
#
|
|
# For a description of the syntax of this configuration file,
|
|
# see the file kconfig-language.txt in the NuttX tools repository.
|
|
#
|
|
|
|
if ARCH_RISCV
|
|
comment "RISC-V Options"
|
|
|
|
choice
|
|
prompt "RISC-V chip selection"
|
|
default ARCH_CHIP_RISCV_CUSTOM
|
|
|
|
config ARCH_CHIP_FE310
|
|
bool "SiFive FE310"
|
|
select ARCH_RV32
|
|
select ARCH_RV_ISA_M
|
|
select ARCH_RV_ISA_A
|
|
select ARCH_RV_ISA_C
|
|
select ONESHOT
|
|
select ALARM_ARCH
|
|
---help---
|
|
SiFive FE310 processor (E31 RISC-V Core with MAC extensions).
|
|
|
|
config ARCH_CHIP_K210
|
|
bool "Kendryte K210"
|
|
select ARCH_RV64
|
|
select ARCH_RV_ISA_M
|
|
select ARCH_RV_ISA_A
|
|
select ARCH_RV_ISA_C
|
|
select ARCH_HAVE_FPU if !K210_WITH_QEMU
|
|
select ARCH_HAVE_DPFPU if !K210_WITH_QEMU
|
|
select ARCH_HAVE_MPU
|
|
select ARCH_HAVE_TESTSET
|
|
select ARCH_HAVE_MULTICPU
|
|
select ARCH_HAVE_MISALIGN_EXCEPTION
|
|
select ONESHOT
|
|
select ALARM_ARCH
|
|
---help---
|
|
Kendryte K210 processor (RISC-V 64bit core with GC extensions)
|
|
|
|
config ARCH_CHIP_LITEX
|
|
bool "Enjoy Digital LITEX VEXRISCV"
|
|
select ARCH_RV32
|
|
select ARCH_RV_ISA_M
|
|
select ARCH_RV_ISA_A
|
|
select ARCH_DCACHE
|
|
select ARCH_HAVE_TICKLESS
|
|
select ARCH_HAVE_RESET
|
|
select LIBC_FDT
|
|
select DEVICE_TREE
|
|
---help---
|
|
Enjoy Digital LITEX VEXRISCV softcore processor (RV32IMA).
|
|
|
|
config ARCH_CHIP_BL602
|
|
bool "BouffaloLab BL602"
|
|
select ARCH_RV32
|
|
select ARCH_RV_ISA_M
|
|
select ARCH_RV_ISA_A
|
|
select ARCH_RV_ISA_C
|
|
select ARCH_HAVE_FPU
|
|
select ARCH_HAVE_RESET
|
|
select ARCH_HAVE_MISALIGN_EXCEPTION
|
|
select ONESHOT
|
|
select ALARM_ARCH
|
|
---help---
|
|
BouffaloLab BL602(rv32imfc)
|
|
|
|
config ARCH_CHIP_ESP32C3
|
|
bool "Espressif ESP32-C3"
|
|
select ARCH_RV32
|
|
select ARCH_RV_ISA_M
|
|
select ARCH_RV_ISA_C
|
|
select ARCH_VECNOTIRQ
|
|
select ARCH_HAVE_MPU
|
|
select ARCH_HAVE_RESET
|
|
select LIBC_ARCH_ATOMIC
|
|
select LIBC_ARCH_MEMCPY
|
|
select LIBC_ARCH_MEMCHR
|
|
select LIBC_ARCH_MEMCMP
|
|
select LIBC_ARCH_MEMMOVE
|
|
select LIBC_ARCH_MEMSET
|
|
select LIBC_ARCH_STRCHR
|
|
select LIBC_ARCH_STRCMP
|
|
select LIBC_ARCH_STRCPY
|
|
select LIBC_ARCH_STRLCPY
|
|
select LIBC_ARCH_STRNCPY
|
|
select LIBC_ARCH_STRLEN
|
|
select LIBC_ARCH_STRNLEN
|
|
select ARCH_HAVE_TEXT_HEAP
|
|
select ARCH_HAVE_BOOTLOADER
|
|
select ARCH_HAVE_PERF_EVENTS
|
|
---help---
|
|
Espressif ESP32-C3 (RV32IMC).
|
|
|
|
config ARCH_CHIP_ESP32C3_GENERIC
|
|
bool "ESP32-C3"
|
|
select ARCH_RV32
|
|
select ARCH_RV_ISA_M
|
|
select ARCH_RV_ISA_C
|
|
select ARCH_VECNOTIRQ
|
|
select ARCH_HAVE_BOOTLOADER if !ESPRESSIF_SIMPLE_BOOT
|
|
select ARCH_HAVE_MPU
|
|
select ARCH_HAVE_RESET
|
|
select ARCH_HAVE_RNG
|
|
select ARCH_HAVE_TICKLESS
|
|
select LIBC_ARCH_ATOMIC
|
|
select LIBC_ARCH_MEMCPY
|
|
select LIBC_ARCH_MEMCHR
|
|
select LIBC_ARCH_MEMCMP
|
|
select LIBC_ARCH_MEMMOVE
|
|
select LIBC_ARCH_MEMSET
|
|
select LIBC_ARCH_STRCHR
|
|
select LIBC_ARCH_STRCMP
|
|
select LIBC_ARCH_STRCPY
|
|
select LIBC_ARCH_STRLCPY
|
|
select LIBC_ARCH_STRNCPY
|
|
select LIBC_ARCH_STRLEN
|
|
select LIBC_ARCH_STRNLEN
|
|
select ESPRESSIF_SOC_RTC_MEM_SUPPORTED
|
|
select ARCH_CHIP_ESPRESSIF
|
|
---help---
|
|
ESP32-C3 chip with a single RISC-V IMC core, no embedded Flash memory
|
|
|
|
config ARCH_CHIP_ESP32C6
|
|
bool "ESP32-C6"
|
|
select ARCH_RV32
|
|
select ARCH_RV_ISA_M
|
|
select ARCH_RV_ISA_A
|
|
select ARCH_RV_ISA_C
|
|
select ARCH_VECNOTIRQ
|
|
select ARCH_HAVE_BOOTLOADER if !ESPRESSIF_SIMPLE_BOOT
|
|
select ARCH_HAVE_MPU
|
|
select ARCH_HAVE_RESET
|
|
select ARCH_HAVE_RNG
|
|
select ARCH_HAVE_TICKLESS
|
|
select LIBC_ARCH_MEMCPY
|
|
select LIBC_ARCH_MEMCHR
|
|
select LIBC_ARCH_MEMCMP
|
|
select LIBC_ARCH_MEMMOVE
|
|
select LIBC_ARCH_MEMSET
|
|
select LIBC_ARCH_STRCHR
|
|
select LIBC_ARCH_STRCMP
|
|
select LIBC_ARCH_STRCPY
|
|
select LIBC_ARCH_STRLCPY
|
|
select LIBC_ARCH_STRNCPY
|
|
select LIBC_ARCH_STRLEN
|
|
select LIBC_ARCH_STRNLEN
|
|
select ESPRESSIF_SOC_RTC_MEM_SUPPORTED
|
|
select ARCH_CHIP_ESPRESSIF
|
|
---help---
|
|
Espressif ESP32-C6 (RV32IMAC).
|
|
|
|
config ARCH_CHIP_ESP32H2
|
|
bool "ESP32-H2"
|
|
select ARCH_RV32
|
|
select ARCH_RV_ISA_M
|
|
select ARCH_RV_ISA_C
|
|
select ARCH_VECNOTIRQ
|
|
select ARCH_HAVE_BOOTLOADER if !ESPRESSIF_SIMPLE_BOOT
|
|
select ARCH_HAVE_MPU
|
|
select ARCH_HAVE_RESET
|
|
select ARCH_HAVE_RNG
|
|
select ARCH_HAVE_TICKLESS
|
|
select LIBC_ARCH_ATOMIC
|
|
select LIBC_ARCH_MEMCPY
|
|
select LIBC_ARCH_MEMCHR
|
|
select LIBC_ARCH_MEMCMP
|
|
select LIBC_ARCH_MEMMOVE
|
|
select LIBC_ARCH_MEMSET
|
|
select LIBC_ARCH_STRCHR
|
|
select LIBC_ARCH_STRCMP
|
|
select LIBC_ARCH_STRCPY
|
|
select LIBC_ARCH_STRLCPY
|
|
select LIBC_ARCH_STRNCPY
|
|
select LIBC_ARCH_STRLEN
|
|
select LIBC_ARCH_STRNLEN
|
|
select ESPRESSIF_ESPTOOLPY_NO_STUB
|
|
select ESPRESSIF_SOC_RTC_MEM_SUPPORTED
|
|
select ARCH_CHIP_ESPRESSIF
|
|
---help---
|
|
Espressif ESP32-H2 (RV32IMC).
|
|
|
|
config ARCH_CHIP_C906
|
|
bool "THEAD C906"
|
|
select ARCH_RV64
|
|
select ARCH_RV_ISA_M
|
|
select ARCH_RV_ISA_A
|
|
select ARCH_RV_ISA_C
|
|
select ARCH_HAVE_FPU
|
|
select ARCH_HAVE_DPFPU
|
|
select ARCH_HAVE_MPU
|
|
select ONESHOT
|
|
select ALARM_ARCH
|
|
---help---
|
|
THEAD C906 processor (RISC-V 64bit core with GCVX extensions).
|
|
|
|
config ARCH_CHIP_MPFS
|
|
bool "MicroChip Polarfire (MPFS)"
|
|
select ARCH_RV64
|
|
select ARCH_RV_ISA_M
|
|
select ARCH_RV_ISA_A
|
|
select ARCH_RV_ISA_C
|
|
select ARCH_HAVE_FPU
|
|
select ARCH_HAVE_DPFPU
|
|
select ARCH_HAVE_MPU
|
|
select ARCH_MMU_TYPE_SV39
|
|
select ARCH_HAVE_ADDRENV
|
|
select ARCH_NEED_ADDRENV_MAPPING
|
|
select ARCH_HAVE_RESET
|
|
select ARCH_HAVE_SPI_CS_CONTROL
|
|
select ARCH_HAVE_PWM_MULTICHAN
|
|
select ARCH_HAVE_S_MODE
|
|
select ONESHOT
|
|
select ALARM_ARCH
|
|
---help---
|
|
MicroChip Polarfire processor (RISC-V 64bit core with GCVX extensions).
|
|
|
|
config ARCH_CHIP_RV32M1
|
|
bool "NXP RV32M1"
|
|
select ARCH_RV32
|
|
select ARCH_RV_ISA_M
|
|
select ARCH_RV_ISA_C
|
|
---help---
|
|
NXP RV32M1 processor (RISC-V Core with PULP extensions).
|
|
|
|
config ARCH_CHIP_QEMU_RV
|
|
bool "QEMU RV"
|
|
select ARCH_HAVE_FPU
|
|
select ARCH_HAVE_DPFPU
|
|
select ARCH_HAVE_MULTICPU
|
|
select ARCH_HAVE_MPU
|
|
select ARCH_MMU_TYPE_SV39 if ARCH_CHIP_QEMU_RV64
|
|
select ARCH_MMU_TYPE_SV32 if ARCH_CHIP_QEMU_RV32
|
|
select ARCH_HAVE_ADDRENV
|
|
select ARCH_NEED_ADDRENV_MAPPING
|
|
select ARCH_HAVE_S_MODE
|
|
select ARCH_HAVE_ELF_EXECUTABLE
|
|
select ONESHOT
|
|
select ALARM_ARCH
|
|
---help---
|
|
QEMU Generic RV32/RV64 processor
|
|
|
|
config ARCH_CHIP_HPM6000
|
|
bool "Hpmicro HPM6000"
|
|
select ARCH_RV32
|
|
select ARCH_RV_ISA_M
|
|
select ARCH_RV_ISA_A
|
|
select ARCH_RV_ISA_C
|
|
select ONESHOT
|
|
select ALARM_ARCH
|
|
---help---
|
|
Hpmicro HPM6000 processor (D45 RISC-V Core with MAC extensions).
|
|
|
|
config ARCH_CHIP_HPM6750
|
|
bool "Hpmicro HPM6750"
|
|
select ARCH_RV32
|
|
select ARCH_RV_ISA_M
|
|
select ARCH_RV_ISA_A
|
|
select ARCH_RV_ISA_C
|
|
select ONESHOT
|
|
select ALARM_ARCH
|
|
---help---
|
|
Hpmicro HPM6750 processor (D45 RISC-V Core with MAC extensions).
|
|
|
|
config ARCH_CHIP_JH7110
|
|
bool "StarFive JH7110"
|
|
select ARCH_RV64
|
|
select ARCH_RV_ISA_M
|
|
select ARCH_RV_ISA_A
|
|
select ARCH_RV_ISA_C
|
|
select ARCH_HAVE_FPU
|
|
select ARCH_HAVE_DPFPU
|
|
select ARCH_HAVE_MULTICPU
|
|
select ARCH_HAVE_MPU
|
|
select ARCH_MMU_TYPE_SV39
|
|
select ARCH_HAVE_ADDRENV
|
|
select ARCH_NEED_ADDRENV_MAPPING
|
|
select ARCH_HAVE_S_MODE
|
|
select ONESHOT
|
|
select ALARM_ARCH
|
|
---help---
|
|
StarFive JH7110 SoC.
|
|
|
|
config ARCH_CHIP_BL808
|
|
bool "Bouffalo Lab BL808"
|
|
select ARCH_RV64
|
|
select ARCH_RV_ISA_M
|
|
select ARCH_RV_ISA_A
|
|
select ARCH_RV_ISA_C
|
|
select ARCH_HAVE_FPU
|
|
select ARCH_HAVE_DPFPU
|
|
select ARCH_HAVE_MULTICPU
|
|
select ARCH_HAVE_MPU
|
|
select ARCH_MMU_TYPE_SV39
|
|
select ARCH_HAVE_ADDRENV
|
|
select ARCH_NEED_ADDRENV_MAPPING
|
|
select ARCH_HAVE_S_MODE
|
|
select ONESHOT
|
|
select ALARM_ARCH
|
|
---help---
|
|
Bouffalo Lab BL808 SoC.
|
|
|
|
config ARCH_CHIP_K230
|
|
bool "Kendryte K230"
|
|
select ARCH_RV64
|
|
select ARCH_RV_ISA_M
|
|
select ARCH_RV_ISA_A
|
|
select ARCH_RV_ISA_C
|
|
select ARCH_HAVE_FPU
|
|
select ARCH_HAVE_DPFPU
|
|
select ARCH_HAVE_MISALIGN_EXCEPTION
|
|
select ARCH_HAVE_MPU
|
|
select ARCH_HAVE_ADDRENV
|
|
select ARCH_HAVE_RESET
|
|
select ARCH_HAVE_S_MODE
|
|
select ARCH_HAVE_ELF_EXECUTABLE
|
|
select ARCH_MMU_TYPE_SV39
|
|
select ARCH_NEED_ADDRENV_MAPPING
|
|
select NUTTSBI_LATE_INIT if NUTTSBI
|
|
select ONESHOT
|
|
select ALARM_ARCH
|
|
---help---
|
|
Kendryte K230 SoC (RV64GCV and RV64GCVX C908 cores).
|
|
|
|
config ARCH_CHIP_SG2000
|
|
bool "SOPHGO SG2000"
|
|
select ARCH_RV64
|
|
select ARCH_RV_ISA_M
|
|
select ARCH_RV_ISA_A
|
|
select ARCH_RV_ISA_C
|
|
select ARCH_HAVE_FPU
|
|
select ARCH_HAVE_DPFPU
|
|
select ARCH_HAVE_MULTICPU
|
|
select ARCH_HAVE_MPU
|
|
select ARCH_MMU_TYPE_SV39
|
|
select ARCH_HAVE_ADDRENV
|
|
select ARCH_NEED_ADDRENV_MAPPING
|
|
select ARCH_HAVE_S_MODE
|
|
select ONESHOT
|
|
select ALARM_ARCH
|
|
---help---
|
|
SOPHGO SG2000 SoC.
|
|
|
|
config ARCH_CHIP_RISCV_CUSTOM
|
|
bool "Custom RISC-V chip"
|
|
select ARCH_CHIP_CUSTOM
|
|
---help---
|
|
Select this option if there is no directory for the chip under arch/risc-v/src/.
|
|
|
|
endchoice # RISC-V chip selection
|
|
|
|
config ARCH_RV32
|
|
bool
|
|
default n
|
|
|
|
config ARCH_RV64
|
|
bool
|
|
default n
|
|
select LIBC_ARCH_ELF_64BIT if LIBC_ARCH_ELF && !ARCH_RV64ILP32
|
|
|
|
config ARCH_RV64ILP32
|
|
bool
|
|
depends on ARCH_RV64
|
|
default n
|
|
|
|
config ARCH_RV_ISA_M
|
|
bool
|
|
default n
|
|
|
|
config ARCH_RV_ISA_A
|
|
bool
|
|
default n
|
|
select ARCH_HAVE_TESTSET
|
|
|
|
config ARCH_RV_ISA_C
|
|
bool
|
|
default n
|
|
|
|
config ARCH_RV_ISA_V
|
|
bool
|
|
default n
|
|
depends on ARCH_FPU
|
|
|
|
if ARCH_RV_ISA_V
|
|
|
|
config ARCH_RV_VECTOR_BYTE_LENGTH
|
|
int "Vector Register Length in bytes"
|
|
default 32
|
|
---help---
|
|
Predefined vector register length. If CSR vlenb is greater than the
|
|
current reserved value, appropriate memory will be allocated to
|
|
save/restore the vector registers.
|
|
The XLEN-bit-wide read-only CSR vlenb holds the value VLEN/8, i.e.,
|
|
the vector register length in bytes. The value in vlenb is a
|
|
design-time constant in any implementation. Without this CSR, several
|
|
instructions are needed to calculate VLEN in bytes. The code has to
|
|
disturb current vl and vtype settings which require them to be saved and restored.
|
|
|
|
endif
|
|
|
|
config ARCH_RV_ISA_ZICSR_ZIFENCEI
|
|
bool
|
|
default y
|
|
---help---
|
|
https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=aed44286efa8ae8717a77d94b51ac3614e2ca6dc
|
|
https://gcc.gnu.org/git/?p=gcc.git;a=commit;h=98416dbb0a62579d4a7a4a76bab51b5b52fec2cd
|
|
GCC-12.1.0 bumped the default ISA spec to the newer 20191213 version,
|
|
which moves some instructions from the I extension to the Zicsr and
|
|
Zifencei extensions. This requires explicitly specifying Zicsr and
|
|
Zifencei when GCC >= 12.1.0. To make life easier, and avoid forcing
|
|
toolchains that default to a newer ISA spec to version 2.2. For
|
|
clang < 17 or GCC < 11.3.0, for which this is not possible or need
|
|
special treatment.
|
|
|
|
config ARCH_RV_EXPERIMENTAL_EXTENSIONS
|
|
string "LLVM RISC-V Experimental Extensions"
|
|
default ""
|
|
depends on RISCV_TOOLCHAIN_CLANG
|
|
---help---
|
|
This option allows the platform to enable experimental extensions,
|
|
LLVM supports (to various degrees) a number of experimental extensions.
|
|
All experimental extensions have experimental- as a prefix. There is
|
|
explicitly no compatibility promised between versions of the toolchain,
|
|
and regular users are strongly advised not to make use of experimental
|
|
extensions before they reach ratification.
|
|
|
|
config ARCH_RV_ISA_VENDOR_EXTENSIONS
|
|
string "Vendor Custom RISC-V Instruction Set Architecture Extensions"
|
|
default ""
|
|
---help---
|
|
This option allows the platform to enable some vendor-customized ISA extensions,
|
|
E.g OpenHW, SiFive, T-Head.
|
|
|
|
SiFive Intelligence Extensions:
|
|
SiFive Vector Coprocessor Interface(VCIX): xsfvcp
|
|
SiFive FP32-to-int8 Ranged Clip Instructions: Xsfvfnrclipxfqf
|
|
SiFive Matrix Multiply Accumulate Instructions: Xsfvfwmaccqqq
|
|
SiFive Int8 Matrix Multiplication Instructions: XSFvqmaccqoq
|
|
Command Line:
|
|
xsfvcp0p1_xsfvfnrclipxfqf0p1_xsfvfwmaccqqq0p1_xsfvqmaccqoq0p1
|
|
|
|
config ARCH_RV_MMIO_BITS
|
|
int
|
|
# special cases
|
|
default 32 if ARCH_CHIP_K230
|
|
# general fallbacks
|
|
default 32 if ARCH_RV32
|
|
default 64 if ARCH_RV64
|
|
|
|
config ARCH_FAMILY
|
|
string
|
|
default "rv32" if ARCH_RV32
|
|
default "rv64" if ARCH_RV64
|
|
|
|
config ARCH_CHIP
|
|
string
|
|
default "fe310" if ARCH_CHIP_FE310
|
|
default "k210" if ARCH_CHIP_K210
|
|
default "litex" if ARCH_CHIP_LITEX
|
|
default "bl602" if ARCH_CHIP_BL602
|
|
default "esp32c3-legacy" if ARCH_CHIP_ESP32C3
|
|
default "esp32c3" if ARCH_CHIP_ESP32C3_GENERIC
|
|
default "esp32c6" if ARCH_CHIP_ESP32C6
|
|
default "esp32h2" if ARCH_CHIP_ESP32H2
|
|
default "c906" if ARCH_CHIP_C906
|
|
default "mpfs" if ARCH_CHIP_MPFS
|
|
default "rv32m1" if ARCH_CHIP_RV32M1
|
|
default "qemu-rv" if ARCH_CHIP_QEMU_RV
|
|
default "hpm6000" if ARCH_CHIP_HPM6000
|
|
default "hpm6750" if ARCH_CHIP_HPM6750
|
|
default "jh7110" if ARCH_CHIP_JH7110
|
|
default "bl808" if ARCH_CHIP_BL808
|
|
default "k230" if ARCH_CHIP_K230
|
|
default "sg2000" if ARCH_CHIP_SG2000
|
|
|
|
config ARCH_RISCV_INTXCPT_EXTENSIONS
|
|
bool "RISC-V Integer Context Extensions"
|
|
default n
|
|
depends on RV32M1_OPENISA_TOOLCHAIN
|
|
---help---
|
|
RISC-V could be customized with extensions. Some Integer Context
|
|
Registers have to be saved and restored when Contexts switch.
|
|
|
|
if ARCH_RISCV_INTXCPT_EXTENSIONS
|
|
|
|
config ARCH_RISCV_INTXCPT_EXTREGS
|
|
int "Number of Extral RISC-V Integer Context Registers"
|
|
default 0
|
|
|
|
endif
|
|
|
|
config ARCH_MMU_TYPE_SV39
|
|
bool
|
|
default n
|
|
select ARCH_HAVE_MMU
|
|
|
|
config ARCH_MMU_TYPE_SV32
|
|
bool
|
|
default n
|
|
select ARCH_HAVE_MMU
|
|
|
|
config ARCH_HAVE_S_MODE
|
|
bool
|
|
default n
|
|
|
|
config ARCH_HAVE_MISALIGN_EXCEPTION
|
|
bool
|
|
default n
|
|
---help---
|
|
The chip will raise a exception while misaligned memory access.
|
|
|
|
config RISCV_MISALIGNED_HANDLER
|
|
bool "Software misaligned memory access handler"
|
|
depends on ARCH_HAVE_MISALIGN_EXCEPTION
|
|
default y
|
|
|
|
config RISCV_PERCPU_SCRATCH
|
|
bool "Enable Scratch-based Per-CPU storage"
|
|
default n
|
|
---help---
|
|
In some special chipsets, multiple CPUs may be bundled in one hardware
|
|
thread cluster, which results in hartid and cpuindex not being exactly
|
|
the same.
|
|
This option will enable Scratch-based Per-CPU storage to distinguish
|
|
the real cpu index.
|
|
|
|
# Option to run NuttX in supervisor mode. This is obviously not usable in
|
|
# flat mode, is questionable in protected mode, but is mandatory in kernel
|
|
# mode.
|
|
#
|
|
# Kernel mode requires this as M-mode uses flat addressing and the kernel
|
|
# memory must be mapped in order to share memory between the kernel and
|
|
# different user tasks which reside in virtual memory.
|
|
#
|
|
# Note that S-mode requires a companion software (SBI)
|
|
#
|
|
|
|
config ARCH_USE_S_MODE
|
|
bool "Run NuttX in S-mode"
|
|
default n
|
|
depends on ARCH_HAVE_S_MODE
|
|
select RISCV_PERCPU_SCRATCH
|
|
---help---
|
|
Most of the RISC-V implementations run in M-mode (flat addressing)
|
|
and/or U-mode (in case of separate kernel-/userspaces). This provides
|
|
an option to run the kernel in S-mode, if the target supports it.
|
|
|
|
config ARCH_RV_EXT_SSTC
|
|
bool "Enable RISC-V SSTC extension support"
|
|
default n
|
|
depends on ARCH_USE_S_MODE
|
|
|
|
choice
|
|
prompt "Toolchain Selection"
|
|
default RISCV_TOOLCHAIN_GNU_RV64
|
|
|
|
config RISCV_TOOLCHAIN_GNU_RV64
|
|
bool "Generic GNU RV64 toolchain"
|
|
select ARCH_TOOLCHAIN_GNU
|
|
---help---
|
|
This option should work for any modern GNU toolchain (GCC 5.2 or newer)
|
|
configured for riscv64-unknown-elf.
|
|
|
|
config RISCV_TOOLCHAIN_GNU_RV32
|
|
bool "Generic GNU RV32 toolchain"
|
|
select ARCH_TOOLCHAIN_GNU
|
|
---help---
|
|
This option should work for any modern GNU toolchain (GCC 5.2 or newer)
|
|
configured for riscv32-unknown-elf.
|
|
|
|
config RISCV_TOOLCHAIN_CLANG
|
|
bool "LLVM Clang toolchain"
|
|
select ARCH_TOOLCHAIN_CLANG
|
|
|
|
config RISCV_TOOLCHAIN_GNU_RV64ILP32
|
|
bool "Generic GNU RV64ILP32 toolchain"
|
|
select ARCH_TOOLCHAIN_GNU
|
|
select ARCH_RV64ILP32
|
|
---help---
|
|
This option work with Ruyisdk toolchain (GCC 13 or newer)
|
|
configured for riscv64-unknown-elf.
|
|
|
|
endchoice # Toolchain Selection
|
|
|
|
config RISCV_SEMIHOSTING_HOSTFS
|
|
bool "Semihosting HostFS"
|
|
depends on FS_HOSTFS
|
|
---help---
|
|
Mount HostFS through semihosting.
|
|
|
|
This doesn't support some directory operations like readdir because
|
|
of the limitations of semihosting mechanism.
|
|
|
|
if RISCV_SEMIHOSTING_HOSTFS
|
|
|
|
config RISCV_SEMIHOSTING_HOSTFS_CACHE_COHERENCE
|
|
bool "Cache coherence in semihosting hostfs"
|
|
depends on ARCH_DCACHE
|
|
---help---
|
|
Flush & Invalidte cache before & after bkpt instruction.
|
|
|
|
endif # RISCV_SEMIHOSTING_HOSTFS
|
|
|
|
if ARCH_CHIP_LITEX
|
|
|
|
choice
|
|
prompt "LITEX Core Selection"
|
|
default LITEX_CORE_VEXRISCV
|
|
|
|
config LITEX_CORE_VEXRISCV
|
|
bool "vexriscv core"
|
|
|
|
config LITEX_CORE_VEXRISCV_SMP
|
|
bool "vexriscv_smp core"
|
|
select ARCH_HAVE_MPU
|
|
select ARCH_RV_ISA_C
|
|
select ARCH_MMU_TYPE_SV32
|
|
select ARCH_HAVE_ADDRENV
|
|
select ARCH_NEED_ADDRENV_MAPPING
|
|
select ARCH_HAVE_S_MODE
|
|
select ARCH_HAVE_ELF_EXECUTABLE
|
|
|
|
endchoice # LITEX Core Selection
|
|
|
|
endif # ARCH_CHIP_LITEX
|
|
|
|
source "arch/risc-v/src/opensbi/Kconfig"
|
|
source "arch/risc-v/src/nuttsbi/Kconfig"
|
|
|
|
if ARCH_CHIP_FE310
|
|
source "arch/risc-v/src/fe310/Kconfig"
|
|
endif
|
|
if ARCH_CHIP_K210
|
|
source "arch/risc-v/src/k210/Kconfig"
|
|
endif
|
|
if ARCH_CHIP_LITEX
|
|
source "arch/risc-v/src/litex/Kconfig"
|
|
endif
|
|
if ARCH_CHIP_BL602
|
|
source "arch/risc-v/src/bl602/Kconfig"
|
|
endif
|
|
if ARCH_CHIP_ESP32C3
|
|
source "arch/risc-v/src/esp32c3-legacy/Kconfig"
|
|
endif
|
|
if ARCH_CHIP_ESP32C3_GENERIC
|
|
source "arch/risc-v/src/esp32c3/Kconfig"
|
|
endif
|
|
if ARCH_CHIP_ESP32C6
|
|
source "arch/risc-v/src/esp32c6/Kconfig"
|
|
endif
|
|
if ARCH_CHIP_ESP32H2
|
|
source "arch/risc-v/src/esp32h2/Kconfig"
|
|
endif
|
|
if ARCH_CHIP_C906
|
|
source "arch/risc-v/src/c906/Kconfig"
|
|
endif
|
|
if ARCH_CHIP_MPFS
|
|
source "arch/risc-v/src/mpfs/Kconfig"
|
|
endif
|
|
if ARCH_CHIP_RV32M1
|
|
source "arch/risc-v/src/rv32m1/Kconfig"
|
|
endif
|
|
if ARCH_CHIP_QEMU_RV
|
|
source "arch/risc-v/src/qemu-rv/Kconfig"
|
|
endif
|
|
if ARCH_CHIP_HPM6000
|
|
source "arch/risc-v/src/hpm6000/Kconfig"
|
|
endif
|
|
if ARCH_CHIP_HPM6750
|
|
source "arch/risc-v/src/hpm6750/Kconfig"
|
|
endif
|
|
if ARCH_CHIP_JH7110
|
|
source "arch/risc-v/src/jh7110/Kconfig"
|
|
endif
|
|
if ARCH_CHIP_BL808
|
|
source "arch/risc-v/src/bl808/Kconfig"
|
|
endif
|
|
if ARCH_CHIP_K230
|
|
source "arch/risc-v/src/k230/Kconfig"
|
|
endif
|
|
if ARCH_CHIP_SG2000
|
|
source "arch/risc-v/src/sg2000/Kconfig"
|
|
endif
|
|
endif # ARCH_RISCV
|