sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
921acc38cc
nuttx/arch/arm/src/stm32/Kconfig
patacongo 921acc38cc Prep for 6.21 release 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5052 42af7a65-404d-4744-a932-0658087f49c3
2012-08-25 16:40:31 +00:00

1966 lines
45 KiB
Plaintext
Raw Blame History

#
# For a description of the syntax of this configuration file,
# see misc/tools/kconfig-language.txt.
#
choice
prompt "STM32 Chip Selection"
default ARCH_CHIP_STM32F103ZET6
depends on ARCH_CHIP_STM32
config ARCH_CHIP_STM32F103ZET6
bool "STM32F103ZET6"
config ARCH_CHIP_STM32F103RET6
bool "STM32F103RET6"
config ARCH_CHIP_STM32F103VCT6
bool "STM32F103VCT6"
config ARCH_CHIP_STM32F105VBT7
bool "STM32F105VBT7"
config ARCH_CHIP_STM32F107VC
bool "STM32F107VC"
config ARCH_CHIP_STM32F207IG
bool "STM32F207IG"
config ARCH_CHIP_STM32F405RG
bool "STM32F405RG"
config ARCH_CHIP_STM32F405VG
bool "STM32F405VG"
config ARCH_CHIP_STM32F405ZG
bool "STM32F405ZG"
config ARCH_CHIP_STM32F407VE
bool "STM32F407VE"
config ARCH_CHIP_STM32F407VG
bool "STM32F407VG"
config ARCH_CHIP_STM32F407ZE
bool "STM32F407ZE"
config ARCH_CHIP_STM32F407ZG
bool "STM32F407ZG"
config ARCH_CHIP_STM32F407IE
bool "STM32F407IE"
config ARCH_CHIP_STM32F407IG
bool "STM32F407IG"
endchoice
config STM32_STM32F10XX
bool
default y if ARCH_CHIP_STM32F103ZET6 || ARCH_CHIP_STM32F103RET6 || ARCH_CHIP_STM32F103VCT6 || ARCH_CHIP_STM32F105VBT7 || ARCH_CHIP_STM32F107VC
config STM32_CONNECTIVITYLINE
bool
default y if ARCH_CHIP_STM32F105VBT7 || ARCH_CHIP_STM32F107VC
config STM32_STM32F20XX
bool
default y if ARCH_CHIP_STM32F207IG
config STM32_STM32F40XX
bool
default y if ARCH_CHIP_STM32F405RG || ARCH_CHIP_STM32F405VG || ARCH_CHIP_STM32F405ZG || ARCH_CHIP_STM32F407VE || ARCH_CHIP_STM32F407VG || ARCH_CHIP_STM32F407ZE || ARCH_CHIP_STM32F407ZG || ARCH_CHIP_STM32F407IE || ARCH_CHIP_STM32F407IE
config ARCH_CORTEXM3
bool
default y if !STM32_STM32F40XX
config ARCH_CORTEXM4
bool
default y if STM32_STM32F40XX
menu "STM32 Peripheral Support"
config STM32_ADC1
bool "ADC1"
default n
config STM32_ADC2
bool "ADC2"
default n
config STM32_ADC3
bool "ADC3"
default n
config STM32_CRC
bool "CRC"
default n
config STM32_DMA1
bool "DMA1"
default n
config STM32_DMA2
bool "DMA2"
default n
config STM32_BKP
bool "BKP"
default n
depends on STM32_STM32F10XX
config STM32_BKPSRAM
bool "BKP RAM"
default n
depends on STM32_STM32F20XX || STM32_STM32F40XX
config STM32_CAN1
bool "CAN1"
default n
config STM32_CAN2
bool "CAN2"
default n
depends on STM32_STM32F20XX || STM32_STM32F40XX
config STM32_CCMDATARAM
bool "CMD/DATA RAM"
default n
depends on STM32_STM32F40XX
config STM32_CRYP
bool "CRYP"
default n
depends on STM32_STM32F20XX || STM32_STM32F40XX
config STM32_DAC1
bool "DAC1"
default n
config STM32_DAC2
bool "DAC2"
default n
config STM32_DCMI
bool "DCMI"
default n
depends on STM32_STM32F20XX || STM32_STM32F40XX
config STM32_ETHMAC
bool "Ethernet MAC"
default n
depends on STM32_STM32F20XX || STM32_STM32F40XX
config STM32_FSMC
bool "FSMC"
default n
config STM32_HASH
bool "HASH"
default n
depends on STM32_STM32F20XX || STM32_STM32F40XX
config STM32_I2C1
bool "I2C1"
default n
config STM32_I2C2
bool "I2C2"
default n
config STM32_I2C3
bool "I2C3"
default n
depends on STM32_STM32F20XX || STM32_STM32F40XX
config STM32_IWDG
bool "IWDG"
default n
config STM32_OTGFS
bool "OTG FS"
default n
depends on STM32_STM32F20XX || STM32_STM32F40XX
config STM32_OTGHS
bool "OTG HS"
default n
depends on STM32_STM32F20XX || STM32_STM32F40XX
config STM32_PWR
bool "PWR"
default n
config STM32_RNG
bool "RNG"
default n
depends on STM32_STM32F20XX || STM32_STM32F40XX
config STM32_SDIO
bool "SDIO"
default n
config STM32_SPI1
bool "SPI1"
default n
config STM32_SPI2
bool "SPI2"
default n
config STM32_SPI3
bool "SPI3"
default n
depends on STM32_STM32F20XX || STM32_STM32F40XX
config STM32_SPI4
bool "SPI4"
default n
depends on STM32_STM32F10XX
config STM32_SYSCFG
bool "SYSCFG"
default n
depends on STM32_STM32F20XX || STM32_STM32F40XX
config STM32_TIM1
bool "TIM1"
default n
config STM32_TIM2
bool "TIM2"
default n
config STM32_TIM3
bool "TIM3"
default n
config STM32_TIM4
bool "TIM4"
default n
config STM32_TIM5
bool "TIM5"
default n
config STM32_TIM6
bool "TIM6"
default n
config STM32_TIM7
bool "TIM7"
default n
config STM32_TIM8
bool "TIM8"
default n
config STM32_TIM9
bool "TIM9"
default n
depends on STM32_STM32F20XX || STM32_STM32F40XX
config STM32_TIM10
bool "TIM10"
default n
depends on STM32_STM32F20XX || STM32_STM32F40XX
config STM32_TIM11
bool "TIM11"
default n
depends on STM32_STM32F20XX || STM32_STM32F40XX
config STM32_TIM12
bool "TIM12"
default n
depends on STM32_STM32F20XX || STM32_STM32F40XX
config STM32_TIM13
bool "TIM13"
default n
depends on STM32_STM32F20XX || STM32_STM32F40XX
config STM32_TIM14
bool "TIM14"
default n
depends on STM32_STM32F20XX || STM32_STM32F40XX
config STM32_USART1
bool "USART1"
default n
config STM32_USART2
bool "USART2"
default n
config STM32_USART3
bool "USART3"
default n
config STM32_UART4
bool "UART4"
default n
config STM32_UART5
bool "UART5"
default n
config STM32_USART6
bool "USART6"
default n
depends on STM32_STM32F20XX || STM32_STM32F40XX
config STM32_USB
bool "USB Device"
default n
depends on STM32_STM32F10XX
config STM32_WWDG
bool "WWDG"
default n
endmenu
config STM32_ADC
bool
default y if STM32_ADC1 || STM32_ADC2 || STM32_ADC3
config STM32_DAC
bool
default y if STM32_DAC1 || STM32_ADC2
config STM32_SPI
bool
default y if STM32_SPI1 || STM32_SPI2 || STM32_SPI3 || STM32_SPI4
config STM32_DMA
bool
default y if STM32_DMA1 || STM32_DMA2
config STM32_CAN
bool
default y if STM32_CAN1 || STM32_CAN2
choice
prompt "TIM1 Alternate Pin Mappings"
depends on STM32_STM32F10XX && STM32_TIM1
default STM32_TIM1_NO_REMAP
config STM32_TIM1_NO_REMAP
bool "No pin remapping"
config STM32_TIM1_FULL_REMAP
bool "Full pin remapping"
config STM32_TIM1_PARTIAL_REMAP
bool "Partial pin remapping"
endchoice
choice
prompt "TIM2 Alternate Pin Mappings"
depends on STM32_STM32F10XX && STM32_TIM2
default STM32_TIM2_NO_REMAP
config STM32_TIM2_NO_REMAP
bool "No pin remapping"
config STM32_TIM2_FULL_REMAP
bool "Full pin remapping"
config STM32_TIM2_PARTIAL_REMAP_1
bool "Partial pin remapping #1"
config STM32_TIM2_PARTIAL_REMAP_2
bool "Partial pin remapping #2"
endchoice
choice
prompt "TIM3 Alternate Pin Mappings"
depends on STM32_STM32F10XX && STM32_TIM3
default STM32_TIM3_NO_REMAP
config STM32_TIM3_NO_REMAP
bool "No pin remapping"
config STM32_TIM3_FULL_REMAP
bool "Full pin remapping"
config STM32_TIM3_PARTIAL_REMAP
bool "Partial pin remapping"
endchoice
config STM32_TIM4_REMAP
bool "TIM4 Alternate Pin Mapping"
default n
depends on STM32_STM32F10XX && STM32_TIM4
config STM32_USART1_REMAP
bool "USART1 Alternate Pin Mapping"
default n
depends on STM32_STM32F10XX && STM32_USART1
config STM32_USART2_REMAP
bool "USART2 Alternate Pin Mapping"
default n
depends on STM32_STM32F10XX && STM32_USART2
choice
prompt "USART3 Alternate Pin Mappings"
depends on STM32_STM32F10XX && STM32_USART3
default STM32_USART3_NO_REMAP
config STM32_USART3_NO_REMAP
bool "No pin remapping"
config STM32_USART3_FULL_REMAP
bool "Full pin remapping"
config STM32_USART3_PARTIAL_REMAP
bool "Partial pin remapping"
endchoice
config STM32_SPI1_REMAP
bool "SPI1 Alternate Pin Mapping"
default n
depends on STM32_STM32F10XX && STM32_SPI1
config STM32_SPI3_REMAP
bool "SPI3 Alternate Pin Mapping"
default n
depends on STM32_STM32F10XX && STM32_SPI3
config STM32_I2C1_REMAP
bool "I2C1 Alternate Pin Mapping"
default n
depends on STM32_STM32F10XX && STM32_I2C1
choice
prompt "CAN1 Alternate Pin Mappings"
depends on STM32_STM32F10XX && STM32_CAN1
default STM32_CAN1_NO_REMAP
config STM32_CAN1_NO_REMAP
bool "No pin remapping"
config STM32_CAN1_FULL_REMAP
bool "Full pin remapping"
config STM32_CAN1_PARTIAL_REMAP
bool "Partial pin remapping"
endchoice
config STM32_CAN2_REMAP
bool "CAN2 Alternate Pin Mapping"
default n
depends on STM32_STM32F10XX && STM32_CAN2
choice
prompt "JTAG Configuration"
default STM32_JTAG_DISABLE
---help---
JTAG Enable settings (by default JTAG-DP and SW-DP are disabled)
config STM32_JTAG_DISABLE
bool "Disable all JTAG clocking"
config STM32_JTAG_FULL_ENABLE
bool "Enable full SWJ (JTAG-DP + SW-DP)"
config STM32_JTAG_NOJNTRST_ENABLE
bool "Enable full SWJ (JTAG-DP + SW-DP) but without JNTRST"
config STM32_JTAG_SW_ENABLE
bool "Set JTAG-DP disabled and SW-DP enabled"
endchoice
config STM32_FORCEPOWER
bool "Force power"
default n
---help---
Timer and I2C devices may need to the following to force power to be applied
unconditionally at power up. (Otherwise, the device is powered when it is
initialized).
config ARCH_BOARD_STM32_CUSTOM_CLOCKCONFIG
bool "Custom clock configuration"
default n
---help---
Enables special, board-specific STM32 clock configuration.
config STM32_CCMEXCLUDE
bool "Exclude CCM SRAM from the heap"
depends on STM32_STM32F20XX || STM32_STM32F40XX
default y if STM32_DMA1 || STM32_DMA2
---help---
Exclude CCM SRAM from the HEAP because it cannot be used for DMA.
config STM32_FSMC_SRAM
bool "External SRAM on FSMC"
default n
depends on FSMC
---help---
In addition to internal SRAM, SRAM may also be available through the FSMC.
config HEAP2_BASE
hex "FSMC SRAM base address"
default 0x00000000
depends on STM32_FSMC_SRAM
---help---
The base address of the SRAM in the FSMC address space.
config HEAP2_END
hex "FSMC SRAM end+1 address"
default 0x00000000
depends on STM32_FSMC_SRAM
---help---
The end (+1) of the SRAM in the FSMC address space
config ARCH_FPU
bool "FPU support"
default y
depends on ARCH_CORTEXM4
---help---
Build in support for the ARM Cortex-M4 FPU. Only the STM3240xxx supports
a floating point unit (FPU)
config STM32_TIM1_PWM
bool "TIM1 PWM"
default n
depends on STM32_TIM1
---help---
Reserve timer 1 for use by PWM
Timer devices may be used for different purposes. One special purpose is
to generate modulated outputs for such things as motor control. If STM32_TIM1
is defined then THIS following may also be defined to indicate that
the timer is intended to be used for pulsed output modulation.
config STM32_TIM1_CHANNEL
int "TIM1 PWM Output Channel"
default 1
depends on STM32_TIM1_PWM
---help---
If TIM1 is enabled for PWM usage, you also need specifies the timer output
channel {1,..,4}
config STM32_TIM2_PWM
bool "TIM2 PWM"
default n
depends on STM32_TIM2
---help---
Reserve timer 1 for use by PWM
Timer devices may be used for different purposes. One special purpose is
to generate modulated outputs for such things as motor control. If STM32_TIM2
is defined then THIS following may also be defined to indicate that
the timer is intended to be used for pulsed output modulation.
config STM32_TIM2_CHANNEL
int "TIM2 PWM Output Channel"
default 1
depends on STM32_TIM2_PWM
---help---
If TIM2 is enabled for PWM usage, you also need specifies the timer output
channel {1,..,4}
config STM32_TIM3_PWM
bool "TIM3 PWM"
default n
depends on STM32_TIM3
---help---
Reserve timer 1 for use by PWM
Timer devices may be used for different purposes. One special purpose is
to generate modulated outputs for such things as motor control. If STM32_TIM3
is defined then THIS following may also be defined to indicate that
the timer is intended to be used for pulsed output modulation.
config STM32_TIM3_CHANNEL
int "TIM3 PWM Output Channel"
default 1
depends on STM32_TIM3_PWM
---help---
If TIM3 is enabled for PWM usage, you also need specifies the timer output
channel {1,..,4}
config STM32_TIM4_PWM
bool "TIM4 PWM"
default n
depends on STM32_TIM4
---help---
Reserve timer 1 for use by PWM
Timer devices may be used for different purposes. One special purpose is
to generate modulated outputs for such things as motor control. If STM32_TIM4
is defined then THIS following may also be defined to indicate that
the timer is intended to be used for pulsed output modulation.
config STM32_TIM4_CHANNEL
int "TIM4 PWM Output Channel"
default 1
depends on STM32_TIM4_PWM
---help---
If TIM4 is enabled for PWM usage, you also need specifies the timer output
channel {1,..,4}
config STM32_TIM5_PWM
bool "TIM5 PWM"
default n
depends on STM32_TIM5
---help---
Reserve timer 1 for use by PWM
Timer devices may be used for different purposes. One special purpose is
to generate modulated outputs for such things as motor control. If STM32_TIM5
is defined then THIS following may also be defined to indicate that
the timer is intended to be used for pulsed output modulation.
config STM32_TIM5_CHANNEL
int "TIM5 PWM Output Channel"
default 1
depends on STM32_TIM5_PWM
---help---
If TIM5 is enabled for PWM usage, you also need specifies the timer output
channel {1,..,4}
config STM32_TIM8_PWM
bool "TIM8 PWM"
default n
depends on STM32_TIM8
---help---
Reserve timer 1 for use by PWM
Timer devices may be used for different purposes. One special purpose is
to generate modulated outputs for such things as motor control. If STM32_TIM8
is defined then THIS following may also be defined to indicate that
the timer is intended to be used for pulsed output modulation.
config STM32_TIM8_CHANNEL
int "TIM8 PWM Output Channel"
default 1
depends on STM32_TIM8_PWM
---help---
If TIM8 is enabled for PWM usage, you also need specifies the timer output
channel {1,..,4}
config STM32_TIM9_PWM
bool "TIM9 PWM"
default n
depends on STM32_TIM9
---help---
Reserve timer 1 for use by PWM
Timer devices may be used for different purposes. One special purpose is
to generate modulated outputs for such things as motor control. If STM32_TIM9
is defined then THIS following may also be defined to indicate that
the timer is intended to be used for pulsed output modulation.
config STM32_TIM9_CHANNEL
int "TIM9 PWM Output Channel"
default 1
depends on STM32_TIM9_PWM
---help---
If TIM9 is enabled for PWM usage, you also need specifies the timer output
channel {1,..,4}
config STM32_TIM10_PWM
bool "TIM10 PWM"
default n
depends on STM32_TIM10
---help---
Reserve timer 1 for use by PWM
Timer devices may be used for different purposes. One special purpose is
to generate modulated outputs for such things as motor control. If STM32_TIM10
is defined then THIS following may also be defined to indicate that
the timer is intended to be used for pulsed output modulation.
config STM32_TIM10_CHANNEL
int "TIM10 PWM Output Channel"
default 1
depends on STM32_TIM10_PWM
---help---
If TIM10 is enabled for PWM usage, you also need specifies the timer output
channel {1,..,4}
config STM32_TIM11_PWM
bool "TIM11 PWM"
default n
depends on STM32_TIM11
---help---
Reserve timer 1 for use by PWM
Timer devices may be used for different purposes. One special purpose is
to generate modulated outputs for such things as motor control. If STM32_TIM11
is defined then THIS following may also be defined to indicate that
the timer is intended to be used for pulsed output modulation.
config STM32_TIM11_CHANNEL
int "TIM11 PWM Output Channel"
default 1
depends on STM32_TIM11_PWM
---help---
If TIM11 is enabled for PWM usage, you also need specifies the timer output
channel {1,..,4}
config STM32_TIM12_PWM
bool "TIM12 PWM"
default n
depends on STM32_TIM12
---help---
Reserve timer 1 for use by PWM
Timer devices may be used for different purposes. One special purpose is
to generate modulated outputs for such things as motor control. If STM32_TIM12
is defined then THIS following may also be defined to indicate that
the timer is intended to be used for pulsed output modulation.
config STM32_TIM12_CHANNEL
int "TIM12 PWM Output Channel"
default 1
depends on STM32_TIM12_PWM
---help---
If TIM12 is enabled for PWM usage, you also need specifies the timer output
channel {1,..,4}
config STM32_TIM13_PWM
bool "TIM13 PWM"
default n
depends on STM32_TIM13
---help---
Reserve timer 1 for use by PWM
Timer devices may be used for different purposes. One special purpose is
to generate modulated outputs for such things as motor control. If STM32_TIM13
is defined then THIS following may also be defined to indicate that
the timer is intended to be used for pulsed output modulation.
config STM32_TIM13_CHANNEL
int "TIM13 PWM Output Channel"
default 1
depends on STM32_TIM13_PWM
---help---
If TIM13 is enabled for PWM usage, you also need specifies the timer output
channel {1,..,4}
config STM32_TIM14_PWM
bool "TIM14 PWM"
default n
depends on STM32_TIM14
---help---
Reserve timer 1 for use by PWM
Timer devices may be used for different purposes. One special purpose is
to generate modulated outputs for such things as motor control. If STM32_TIM14
is defined then THIS following may also be defined to indicate that
the timer is intended to be used for pulsed output modulation.
config STM32_TIM14_CHANNEL
int "TIM14 PWM Output Channel"
default 1
depends on STM32_TIM14_PWM
---help---
If TIM14 is enabled for PWM usage, you also need specifies the timer output
channel {1,..,4}
config STM32_TIM1_ADC
bool "TIM1 ADC"
default n
depends on STM32_TIM1 && STM32_ADC
---help---
Reserve timer 1 for use by ADC
Timer devices may be used for different purposes. If STM32_TIM1 is
defined then the following may also be defined to indicate that the
timer is intended to be used for ADC conversion. Note that ADC usage
requires two definition: Not only do you have to assign the timer
for used by the ADC, but then you also have to configure which ADC
channel it is assigned to.
choice
prompt "Select TIM1 ADC channel"
default STM32_TIM1_ADC1
depends on STM32_TIM1_ADC
config STM32_TIM1_ADC1
bool "TIM1 ADC channel 1"
---help---
Reserve TIM1 to trigger ADC1
config STM32_TIM1_ADC2
bool "TIM1 ADC channel 2"
---help---
Reserve TIM1 to trigger ADC2
config STM32_TIM1_ADC3
bool "TIM1 ADC channel 3"
---help---
Reserve TIM1 to trigger ADC3
endchoice
config STM32_TIM2_ADC
bool "TIM2 ADC"
default n
depends on STM32_TIM2 && STM32_ADC
---help---
Reserve timer 1 for use by ADC
Timer devices may be used for different purposes. If STM32_TIM2 is
defined then the following may also be defined to indicate that the
timer is intended to be used for ADC conversion. Note that ADC usage
requires two definition: Not only do you have to assign the timer
for used by the ADC, but then you also have to configure which ADC
channel it is assigned to.
choice
prompt "Select TIM2 ADC channel"
default STM32_TIM2_ADC1
depends on STM32_TIM2_ADC
config STM32_TIM2_ADC1
bool "TIM2 ADC channel 1"
---help---
Reserve TIM2 to trigger ADC1
config STM32_TIM2_ADC2
bool "TIM2 ADC channel 2"
---help---
Reserve TIM2 to trigger ADC2
config STM32_TIM2_ADC3
bool "TIM2 ADC channel 3"
---help---
Reserve TIM2 to trigger ADC3
endchoice
config STM32_TIM3_ADC
bool "TIM3 ADC"
default n
depends on STM32_TIM3 && STM32_ADC
---help---
Reserve timer 1 for use by ADC
Timer devices may be used for different purposes. If STM32_TIM3 is
defined then the following may also be defined to indicate that the
timer is intended to be used for ADC conversion. Note that ADC usage
requires two definition: Not only do you have to assign the timer
for used by the ADC, but then you also have to configure which ADC
channel it is assigned to.
choice
prompt "Select TIM3 ADC channel"
default STM32_TIM3_ADC1
depends on STM32_TIM3_ADC
config STM32_TIM3_ADC1
bool "TIM3 ADC channel 1"
---help---
Reserve TIM3 to trigger ADC1
config STM32_TIM3_ADC2
bool "TIM3 ADC channel 2"
---help---
Reserve TIM3 to trigger ADC2
config STM32_TIM3_ADC3
bool "TIM3 ADC channel 3"
---help---
Reserve TIM3 to trigger ADC3
endchoice
config STM32_TIM4_ADC
bool "TIM4 ADC"
default n
depends on STM32_TIM4 && STM32_ADC
---help---
Reserve timer 1 for use by ADC
Timer devices may be used for different purposes. If STM32_TIM4 is
defined then the following may also be defined to indicate that the
timer is intended to be used for ADC conversion. Note that ADC usage
requires two definition: Not only do you have to assign the timer
for used by the ADC, but then you also have to configure which ADC
channel it is assigned to.
choice
prompt "Select TIM4 ADC channel"
default STM32_TIM4_ADC1
depends on STM32_TIM4_ADC
config STM32_TIM4_ADC1
bool "TIM4 ADC channel 1"
---help---
Reserve TIM4 to trigger ADC1
config STM32_TIM4_ADC2
bool "TIM4 ADC channel 2"
---help---
Reserve TIM4 to trigger ADC2
config STM32_TIM4_ADC3
bool "TIM4 ADC channel 3"
---help---
Reserve TIM4 to trigger ADC3
endchoice
config STM32_TIM5_ADC
bool "TIM5 ADC"
default n
depends on STM32_TIM5 && STM32_ADC
---help---
Reserve timer 1 for use by ADC
Timer devices may be used for different purposes. If STM32_TIM5 is
defined then the following may also be defined to indicate that the
timer is intended to be used for ADC conversion. Note that ADC usage
requires two definition: Not only do you have to assign the timer
for used by the ADC, but then you also have to configure which ADC
channel it is assigned to.
choice
prompt "Select TIM5 ADC channel"
default STM32_TIM5_ADC1
depends on STM32_TIM5_ADC
config STM32_TIM5_ADC1
bool "TIM5 ADC channel 1"
---help---
Reserve TIM5 to trigger ADC1
config STM32_TIM5_ADC2
bool "TIM5 ADC channel 2"
---help---
Reserve TIM5 to trigger ADC2
config STM32_TIM5_ADC3
bool "TIM5 ADC channel 3"
---help---
Reserve TIM5 to trigger ADC3
endchoice
config STM32_TIM8_ADC
bool "TIM8 ADC"
default n
depends on STM32_TIM8 && STM32_ADC
---help---
Reserve timer 1 for use by ADC
Timer devices may be used for different purposes. If STM32_TIM8 is
defined then the following may also be defined to indicate that the
timer is intended to be used for ADC conversion. Note that ADC usage
requires two definition: Not only do you have to assign the timer
for used by the ADC, but then you also have to configure which ADC
channel it is assigned to.
choice
prompt "Select TIM8 ADC channel"
default STM32_TIM8_ADC1
depends on STM32_TIM8_ADC
config STM32_TIM8_ADC1
bool "TIM8 ADC channel 1"
---help---
Reserve TIM8 to trigger ADC1
config STM32_TIM8_ADC2
bool "TIM8 ADC channel 2"
---help---
Reserve TIM8 to trigger ADC2
config STM32_TIM8_ADC3
bool "TIM8 ADC channel 3"
---help---
Reserve TIM8 to trigger ADC3
endchoice
config STM32_TIM1_DAC
bool "TIM1 DAC"
default n
depends on STM32_TIM1 && STM32_DAC
---help---
Reserve timer 1 for use by DAC
Timer devices may be used for different purposes. If STM32_TIM1 is
defined then the following may also be defined to indicate that the
timer is intended to be used for DAC conversion. Note that DAC usage
requires two definition: Not only do you have to assign the timer
for used by the DAC, but then you also have to configure which DAC
channel it is assigned to.
choice
prompt "Select TIM1 DAC channel"
default STM32_TIM1_DAC1
depends on STM32_TIM1_DAC
config STM32_TIM1_DAC1
bool "TIM1 DAC channel 1"
---help---
Reserve TIM1 to trigger DAC1
config STM32_TIM1_DAC2
bool "TIM1 DAC channel 2"
---help---
Reserve TIM1 to trigger DAC2
endchoice
config STM32_TIM2_DAC
bool "TIM2 DAC"
default n
depends on STM32_TIM2 && STM32_DAC
---help---
Reserve timer 1 for use by DAC
Timer devices may be used for different purposes. If STM32_TIM2 is
defined then the following may also be defined to indicate that the
timer is intended to be used for DAC conversion. Note that DAC usage
requires two definition: Not only do you have to assign the timer
for used by the DAC, but then you also have to configure which DAC
channel it is assigned to.
choice
prompt "Select TIM2 DAC channel"
default STM32_TIM2_DAC1
depends on STM32_TIM2_DAC
config STM32_TIM2_DAC1
bool "TIM2 DAC channel 1"
---help---
Reserve TIM2 to trigger DAC1
config STM32_TIM2_DAC2
bool "TIM2 DAC channel 2"
---help---
Reserve TIM2 to trigger DAC2
endchoice
config STM32_TIM3_DAC
bool "TIM3 DAC"
default n
depends on STM32_TIM3 && STM32_DAC
---help---
Reserve timer 1 for use by DAC
Timer devices may be used for different purposes. If STM32_TIM3 is
defined then the following may also be defined to indicate that the
timer is intended to be used for DAC conversion. Note that DAC usage
requires two definition: Not only do you have to assign the timer
for used by the DAC, but then you also have to configure which DAC
channel it is assigned to.
choice
prompt "Select TIM3 DAC channel"
default STM32_TIM3_DAC1
depends on STM32_TIM3_DAC
config STM32_TIM3_DAC1
bool "TIM3 DAC channel 1"
---help---
Reserve TIM3 to trigger DAC1
config STM32_TIM3_DAC2
bool "TIM3 DAC channel 2"
---help---
Reserve TIM3 to trigger DAC2
endchoice
config STM32_TIM4_DAC
bool "TIM4 DAC"
default n
depends on STM32_TIM4 && STM32_DAC
---help---
Reserve timer 1 for use by DAC
Timer devices may be used for different purposes. If STM32_TIM4 is
defined then the following may also be defined to indicate that the
timer is intended to be used for DAC conversion. Note that DAC usage
requires two definition: Not only do you have to assign the timer
for used by the DAC, but then you also have to configure which DAC
channel it is assigned to.
choice
prompt "Select TIM4 DAC channel"
default STM32_TIM4_DAC1
depends on STM32_TIM4_DAC
config STM32_TIM4_DAC1
bool "TIM4 DAC channel 1"
---help---
Reserve TIM4 to trigger DAC1
config STM32_TIM4_DAC2
bool "TIM4 DAC channel 2"
---help---
Reserve TIM4 to trigger DAC2
endchoice
config STM32_TIM5_DAC
bool "TIM5 DAC"
default n
depends on STM32_TIM5 && STM32_DAC
---help---
Reserve timer 1 for use by DAC
Timer devices may be used for different purposes. If STM32_TIM5 is
defined then the following may also be defined to indicate that the
timer is intended to be used for DAC conversion. Note that DAC usage
requires two definition: Not only do you have to assign the timer
for used by the DAC, but then you also have to configure which DAC
channel it is assigned to.
choice
prompt "Select TIM5 DAC channel"
default STM32_TIM5_DAC1
depends on STM32_TIM5_DAC
config STM32_TIM5_DAC1
bool "TIM5 DAC channel 1"
---help---
Reserve TIM5 to trigger DAC1
config STM32_TIM5_DAC2
bool "TIM5 DAC channel 2"
---help---
Reserve TIM5 to trigger DAC2
endchoice
config STM32_TIM6_DAC
bool "TIM6 DAC"
default n
depends on STM32_TIM6 && STM32_DAC
---help---
Reserve timer 1 for use by DAC
Timer devices may be used for different purposes. If STM32_TIM6 is
defined then the following may also be defined to indicate that the
timer is intended to be used for DAC conversion. Note that DAC usage
requires two definition: Not only do you have to assign the timer
for used by the DAC, but then you also have to configure which DAC
channel it is assigned to.
choice
prompt "Select TIM6 DAC channel"
default STM32_TIM6_DAC1
depends on STM32_TIM6_DAC
config STM32_TIM6_DAC1
bool "TIM6 DAC channel 1"
---help---
Reserve TIM6 to trigger DAC1
config STM32_TIM6_DAC2
bool "TIM6 DAC channel 2"
---help---
Reserve TIM6 to trigger DAC2
endchoice
config STM32_TIM7_DAC
bool "TIM7 DAC"
default n
depends on STM32_TIM7 && STM32_DAC
---help---
Reserve timer 1 for use by DAC
Timer devices may be used for different purposes. If STM32_TIM7 is
defined then the following may also be defined to indicate that the
timer is intended to be used for DAC conversion. Note that DAC usage
requires two definition: Not only do you have to assign the timer
for used by the DAC, but then you also have to configure which DAC
channel it is assigned to.
choice
prompt "Select TIM7 DAC channel"
default STM32_TIM7_DAC1
depends on STM32_TIM7_DAC
config STM32_TIM7_DAC1
bool "TIM7 DAC channel 1"
---help---
Reserve TIM7 to trigger DAC1
config STM32_TIM7_DAC2
bool "TIM7 DAC channel 2"
---help---
Reserve TIM7 to trigger DAC2
endchoice
config STM32_TIM8_DAC
bool "TIM8 DAC"
default n
depends on STM32_TIM8 && STM32_DAC
---help---
Reserve timer 1 for use by DAC
Timer devices may be used for different purposes. If STM32_TIM8 is
defined then the following may also be defined to indicate that the
timer is intended to be used for DAC conversion. Note that DAC usage
requires two definition: Not only do you have to assign the timer
for used by the DAC, but then you also have to configure which DAC
channel it is assigned to.
choice
prompt "Select TIM8 DAC channel"
default STM32_TIM8_DAC1
depends on STM32_TIM8_DAC
config STM32_TIM8_DAC1
bool "TIM8 DAC channel 1"
---help---
Reserve TIM8 to trigger DAC1
config STM32_TIM8_DAC2
bool "TIM8 DAC channel 2"
---help---
Reserve TIM8 to trigger DAC2
endchoice
config STM32_TIM9_DAC
bool "TIM9 DAC"
default n
depends on STM32_TIM9 && STM32_DAC
---help---
Reserve timer 1 for use by DAC
Timer devices may be used for different purposes. If STM32_TIM9 is
defined then the following may also be defined to indicate that the
timer is intended to be used for DAC conversion. Note that DAC usage
requires two definition: Not only do you have to assign the timer
for used by the DAC, but then you also have to configure which DAC
channel it is assigned to.
choice
prompt "Select TIM9 DAC channel"
default STM32_TIM9_DAC1
depends on STM32_TIM9_DAC
config STM32_TIM9_DAC1
bool "TIM9 DAC channel 1"
---help---
Reserve TIM9 to trigger DAC1
config STM32_TIM9_DAC2
bool "TIM9 DAC channel 2"
---help---
Reserve TIM9 to trigger DAC2
endchoice
config STM32_TIM10_DAC
bool "TIM10 DAC"
default n
depends on STM32_TIM10 && STM32_DAC
---help---
Reserve timer 1 for use by DAC
Timer devices may be used for different purposes. If STM32_TIM10 is
defined then the following may also be defined to indicate that the
timer is intended to be used for DAC conversion. Note that DAC usage
requires two definition: Not only do you have to assign the timer
for used by the DAC, but then you also have to configure which DAC
channel it is assigned to.
choice
prompt "Select TIM10 DAC channel"
default STM32_TIM10_DAC1
depends on STM32_TIM10_DAC
config STM32_TIM10_DAC1
bool "TIM10 DAC channel 1"
---help---
Reserve TIM10 to trigger DAC1
config STM32_TIM10_DAC2
bool "TIM10 DAC channel 2"
---help---
Reserve TIM10 to trigger DAC2
endchoice
config STM32_TIM11_DAC
bool "TIM11 DAC"
default n
depends on STM32_TIM11 && STM32_DAC
---help---
Reserve timer 1 for use by DAC
Timer devices may be used for different purposes. If STM32_TIM11 is
defined then the following may also be defined to indicate that the
timer is intended to be used for DAC conversion. Note that DAC usage
requires two definition: Not only do you have to assign the timer
for used by the DAC, but then you also have to configure which DAC
channel it is assigned to.
choice
prompt "Select TIM11 DAC channel"
default STM32_TIM11_DAC1
depends on STM32_TIM11_DAC
config STM32_TIM11_DAC1
bool "TIM11 DAC channel 1"
---help---
Reserve TIM11 to trigger DAC1
config STM32_TIM11_DAC2
bool "TIM11 DAC channel 2"
---help---
Reserve TIM11 to trigger DAC2
endchoice
config STM32_TIM12_DAC
bool "TIM12 DAC"
default n
depends on STM32_TIM12 && STM32_DAC
---help---
Reserve timer 1 for use by DAC
Timer devices may be used for different purposes. If STM32_TIM12 is
defined then the following may also be defined to indicate that the
timer is intended to be used for DAC conversion. Note that DAC usage
requires two definition: Not only do you have to assign the timer
for used by the DAC, but then you also have to configure which DAC
channel it is assigned to.
choice
prompt "Select TIM12 DAC channel"
default STM32_TIM12_DAC1
depends on STM32_TIM12_DAC
config STM32_TIM12_DAC1
bool "TIM12 DAC channel 1"
---help---
Reserve TIM12 to trigger DAC1
config STM32_TIM12_DAC2
bool "TIM12 DAC channel 2"
---help---
Reserve TIM12 to trigger DAC2
endchoice
config STM32_TIM13_DAC
bool "TIM13 DAC"
default n
depends on STM32_TIM13 && STM32_DAC
---help---
Reserve timer 1 for use by DAC
Timer devices may be used for different purposes. If STM32_TIM13 is
defined then the following may also be defined to indicate that the
timer is intended to be used for DAC conversion. Note that DAC usage
requires two definition: Not only do you have to assign the timer
for used by the DAC, but then you also have to configure which DAC
channel it is assigned to.
choice
prompt "Select TIM13 DAC channel"
default STM32_TIM13_DAC1
depends on STM32_TIM13_DAC
config STM32_TIM13_DAC1
bool "TIM13 DAC channel 1"
---help---
Reserve TIM13 to trigger DAC1
config STM32_TIM13_DAC2
bool "TIM13 DAC channel 2"
---help---
Reserve TIM13 to trigger DAC2
endchoice
config STM32_TIM14_DAC
bool "TIM14 DAC"
default n
depends on STM32_TIM14 && STM32_DAC
---help---
Reserve timer 1 for use by DAC
Timer devices may be used for different purposes. If STM32_TIM14 is
defined then the following may also be defined to indicate that the
timer is intended to be used for DAC conversion. Note that DAC usage
requires two definition: Not only do you have to assign the timer
for used by the DAC, but then you also have to configure which DAC
channel it is assigned to.
choice
prompt "Select TIM14 DAC channel"
default STM32_TIM14_DAC1
depends on STM32_TIM14_DAC
config STM32_TIM14_DAC1
bool "TIM14 DAC channel 1"
---help---
Reserve TIM14 to trigger DAC1
config STM32_TIM14_DAC2
bool "TIM14 DAC channel 2"
---help---
Reserve TIM14 to trigger DAC2
endchoice
menu "USART1 Configuration"
depends on STM32_USART1
config USART1_SERIAL_CONSOLE
bool "USART1 serial console"
default y
---help---
Selects the USART1 for the console and ttys0 (default is the USART1).
config USART1_RXBUFSIZE
int "USART1 Rx buffer size"
default 256
---help---
Characters are buffered as received. This specific the size of the receive
buffer.
config USART1_TXBUFSIZE
int "USART1 Tx buffer size"
default 256
---help---
Characters are buffered before being sent. This specific the size of the
transmit buffer
config USART1_BAUD
int "USART1 BAUD"
default 11520
---help---
The configured BAUD of the UART
config USART1_BITS
int "USART1 number of bits"
default 8
---help---
The number of bits. Must be either 7 or 8.
config USART1_PARITY
int "USART1 parity"
default 0
---help---
0=no parity, 1=odd parity, 2=even parity
config USART1_2STOP
bool "USART1 two stop bits"
default n
---help---
Two stop bits
config USART1_RXDMA
bool "USART1 Rx DMA"
default n
depends on STM32_STM32F40XX && ARCH_DMA && STM32_DMA2
---help---
In high data rate usage, Rx DMA may eliminate Rx overrun errors
endmenu
menu "USART2 Configuration"
depends on STM32_USART2
config USART2_SERIAL_CONSOLE
bool "USART2 serial console"
default y if !STM32_USART1
---help---
Selects the USART2 for the console and ttys0 (default is the USART2).
config USART2_RXBUFSIZE
int "USART2 Rx buffer size"
default 256
---help---
Characters are buffered as received. This specific the size of the receive
buffer.
config USART2_TXBUFSIZE
int "USART2 Tx buffer size"
default 256
---help---
Characters are buffered before being sent. This specific the size of the
transmit buffer
config USART2_BAUD
int "USART2 BAUD"
default 11520
---help---
The configured BAUD of the UART
config USART2_BITS
int "USART2 number of bits"
default 8
---help---
The number of bits. Must be either 7 or 8.
config USART2_PARITY
int "USART2 parity"
default 0
---help---
0=no parity, 1=odd parity, 2=even parity
config USART2_2STOP
bool "USART2 two stop bits"
default n
---help---
Two stop bits
config USART2_RXDMA
bool "USART2 Rx DMA"
default n
depends on STM32_STM32F40XX && ARCH_DMA && STM32_DMA1
---help---
In high data rate usage, Rx DMA may eliminate Rx overrun errors
endmenu
menu "USART3 Configuration"
depends on STM32_USART3
config USART3_SERIAL_CONSOLE
bool "USART3 serial console"
default y if !STM32_USART1 && !STM32_USART2
---help---
Selects the USART3 for the console and ttys0 (default is the USART3).
config USART3_RXBUFSIZE
int "USART3 Rx buffer size"
default 256
---help---
Characters are buffered as received. This specific the size of the receive
buffer.
config USART3_TXBUFSIZE
int "USART3 Tx buffer size"
default 256
---help---
Characters are buffered before being sent. This specific the size of the
transmit buffer
config USART3_BAUD
int "USART3 BAUD"
default 11520
---help---
The configured BAUD of the UART
config USART3_BITS
int "USART3 number of bits"
default 8
---help---
The number of bits. Must be either 7 or 8.
config USART3_PARITY
int "USART3 parity"
default 0
---help---
0=no parity, 1=odd parity, 2=even parity
config USART3_2STOP
bool "USART3 two stop bits"
default n
---help---
Two stop bits
config USART3_RXDMA
bool "USART3 Rx DMA"
default n
depends on STM32_STM32F40XX && ARCH_DMA && STM32_DMA1
---help---
In high data rate usage, Rx DMA may eliminate Rx overrun errors
endmenu
menu "UART4 Configuration"
depends on STM32_UART4
config USART4_SERIAL_CONSOLE
bool "UART4 serial console"
default y if !STM32_USART1 && !STM32_USART2 && !STM32_USART3
---help---
Selects the UART4 for the console and ttys0 (default is the USART1).
config USART4_RXBUFSIZE
int "UART4 Rx buffer size"
default 256
---help---
Characters are buffered as received. This specific the size of the receive
buffer.
config USART4_TXBUFSIZE
int "UART4 Tx buffer size"
default 256
---help---
Characters are buffered before being sent. This specific the size of the
transmit buffer
config USART4_BAUD
int "UART4 BAUD"
default 11520
---help---
The configured BAUD of the UART
config USART4_BITS
int "UART4 number of bits"
default 8
---help---
The number of bits. Must be either 7 or 8.
config USART4_PARITY
int "UART4 parity"
default 0
---help---
0=no parity, 1=odd parity, 2=even parity
config USART4_2STOP
bool "UART4 two stop bits"
default n
---help---
Two stop bits
config USART4_RXDMA
bool "USART4 Rx DMA"
default n
depends on STM32_STM32F40XX && ARCH_DMA && STM32_DMA1
---help---
In high data rate usage, Rx DMA may eliminate Rx overrun errors
endmenu
menu "UART5 Configuration"
depends on STM32_UART5
config USART5_SERIAL_CONSOLE
bool "UART5 serial console"
default y if !STM32_USART1 && !STM32_USART2 && !STM32_USART3 && !STM32_UART4
---help---
Selects the UART5 for the console and ttys0 (default is the USART1).
config USART5_RXBUFSIZE
int "USART5 Rx buffer size"
default 256
---help---
Characters are buffered as received. This specific the size of the receive
buffer.
config USART5_TXBUFSIZE
int "UART5 Tx buffer size"
default 256
---help---
Characters are buffered before being sent. This specific the size of the
transmit buffer
config USART5_BAUD
int "UART5 BAUD"
default 11520
---help---
The configured BAUD of the UART
config USART5_BITS
int "UART5 number of bits"
default 8
---help---
The number of bits. Must be either 7 or 8.
config USART5_PARITY
int "UART5 parity"
default 0
---help---
0=no parity, 1=odd parity, 2=even parity
config USART5_2STOP
bool "UART5 two stop bits"
default n
---help---
Two stop bits
config USART5_RXDMA
bool "USART5 Rx DMA"
default n
depends on STM32_STM32F40XX && ARCH_DMA && STM32_DMA1
---help---
In high data rate usage, Rx DMA may eliminate Rx overrun errors
endmenu
menu "USART6 Configuration"
depends on STM32_USART6
config USART6_SERIAL_CONSOLE
bool "USART6 serial console"
default y if !STM32_USART1 && !STM32_USART2 && !STM32_USART3 && !STM32_UART4 && !STM32_UART5
---help---
Selects the USART6 for the console and ttys0 (default is the USART6).
config USART6_RXBUFSIZE
int "USART6 Rx buffer size"
default 256
---help---
Characters are buffered as received. This specific the size of the receive
buffer.
config USART6_TXBUFSIZE
int "USART6 Tx buffer size"
default 256
---help---
Characters are buffered before being sent. This specific the size of the
transmit buffer
config USART6_BAUD
int "USART6 BAUD"
default 11520
---help---
The configured BAUD of the UART
config USART6_BITS
int "USART6 number of bits"
default 8
---help---
The number of bits. Must be either 7 or 8.
config USART6_PARITY
int "USART6 parity"
default 0
---help---
0=no parity, 1=odd parity, 2=even parity
config USART6_2STOP
bool "USART6 two stop bits"
default n
---help---
Two stop bits
config USART6_RXDMA
bool "USART6 Rx DMA"
default n
depends on STM32_STM32F40XX && ARCH_DMA && STM32_DMA2
---help---
In high data rate usage, Rx DMA may eliminate Rx overrun errors
endmenu
config SERIAL_TERMIOS
bool "Serial driver TERMIOS supported"
depends on STM32_USART1 || STM32_USART2 || STM32_USART3 || STM32_UART4 || STM32_UART5 || STM32_USART6
default n
---help---
Serial driver supports termios.h interfaces (tcsetattr, tcflush, etc.).
If this is not defined, then the terminal settings (baud, parity, etc).
are not configurable at runtime; serial streams cannot be flushed, etc..
menu "SPI Configuration"
depends on STM32_SPI
config STM32_SPI_INTERRUPTS
bool "Interrupt driver SPI"
default n
---help---
Select to enable interrupt driven SPI support. Non-interrupt-driven,
poll-waiting is recommended if the interrupt rate would be to high in
the interrupt driven case.
config STM32_SPI_DMA
bool "SPI DMA"
default n
---help---
Use DMA to improve SPI transfer performance. Cannot be used with STM32_SPI_INTERRUPT.
endmenu
menu "SDIO Configuration"
depends on STM32_SDIO
config SDIO_DMA
bool "Support DMA data transfers"
default y if STM32_DMA2
depends on STM32_DMA2
---help---
Support DMA data transfers. Requires STM32_SDIO and config STM32_DMA2.
config SDIO_PRI
hex "SDIO interrupt priority"
default 128
---help---
Select SDIO interrupt prority. Default: 128.
config SDIO_DMAPRIO
hex "SDIO DMA priority"
default 0x00001000
---help---
Select SDIO DMA prority. Options: 0x00000000 low, 0x00001000 medium,
0x00002000 high, 0x00003000 very high. Default: medium.
config SDIO_WIDTH_D1_ONLY
bool "Use D1 only"
default n
---help---
Select 1-bit transfer mode. Default: 4-bit transfer mode.
endmenu
menu "Ethernet MAC configuration"
config STM32_PHYADDR
int "PHY address"
---help---
The 5-bit address of the PHY on the board
config STM32_MII
bool "Use MII interface"
default n
---help---
Support Ethernet MII interface.
config STM32_MII_MCO2
bool "Use MC02 as MII clock"
default n
depends on STM32_MII
---help---
Use MCO2 to clock the MII interface. Default: Use MC01
config STM32_AUTONEG
bool "Use autonegtiation"
default y
---help---
Use PHY autonegotion to determine speed and mode
config STM32_ETHFD
bool "Full duplex"
default n
depends on !STM32_AUTONEG
---help---
If STM32_AUTONEG is not defined, then this may be defined to select full duplex
mode. Default: half-duplex
config STM32_ETH100MBPS
bool "100 Mbps"
default n
depends on !STM32_AUTONEG
---help---
If STM32_AUTONEG is not defined, then this may be defined to select 100 MBps
speed. Default: 10 Mbps
config STM32_PHYSR
hex "PHY status register address"
depends on STM32_AUTONEG
---help---
This must be provided if STM32_AUTONEG is defined. The PHY status register
address may diff from PHY to PHY. This configuration sets the address of
the PHY status register.
config STM32_PHYSR_SPEED
hex "PHY speed mask"
depends on STM32_AUTONEG
---help---
This must be provided if STM32_AUTONEG is defined. This provides bit mask
indicating 10 or 100MBps speed.
config STM32_PHYSR_100MBPS
hex "PHY 100Mbps speed value"
depends on STM32_AUTONEG
---help---
This must be provided if STM32_AUTONEG is defined. This provides the value
of the speed bit(s) indicating 100MBps speed.
config STM32_PHYSR_MODE
hex "PHY mode mask"
depends on STM32_AUTONEG
---help---
This must be provided if STM32_AUTONEG is defined. This provide bit mask
indicating full or half duplex modes.
config STM32_PHYSR_FULLDUPLEX
hex "PHY full duplex mode value"
depends on STM32_AUTONEG
---help---
This must be provided if STM32_AUTONEG is defined. This provides the
value of the mode bits indicating full duplex mode.
config STM32_ETH_PTP
bool "Precision Time Protocol (PTP)"
default n
---help---
Precision Time Protocol (PTP). Not supported but some hooks are indicated
with this condition.
endmenu
config STM32_RMII
bool
default y if !STM32_MII
config STM32_MII_MCO1
bool
default y if !STM32_MII_MCO2
depends on STM32_MII
menu "USB Host Configuration"
config STM32_OTGFS_RXFIFO_SIZE
int "Rx Packet Size"
default 128
depends on USBHOST && STM32_OTGFS
---help---
Size of the RX FIFO in 32-bit words. Default 128 (512 bytes)
config STM32_OTGFS_NPTXFIFO_SIZE
int "Non-periodic Tx FIFO Size"
default 96
depends on USBHOST && STM32_OTGFS
---help---
Size of the non-periodic Tx FIFO in 32-bit words. Default 96 (384 bytes)
config STM32_OTGFS_PTXFIFO_SIZE
int "Periodic Tx FIFO size"
default 128
depends on USBHOST && STM32_OTGFS
---help---
Size of the periodic Tx FIFO in 32-bit words. Default 96 (384 bytes)
config STM32_OTGFS_DESCSIZE
int "Descriptor Size"
default 128
depends on USBHOST && STM32_OTGFS
---help---
Maximum size to allocate for descriptor memory descriptor. Default: 128
config STM32_OTGFS_SOFINTR
bool "Enable SOF interrupts"
default n
depends on USBHOST && STM32_OTGFS
---help---
Enable SOF interrupts. Why would you ever want to do that?
config STM32_USBHOST_REGDEBUG
bool "Register-Level Debug"
default n
depends on USBHOST && STM32_OTGFS
---help---
Enable very low-level register access debug. Depends on CONFIG_DEBUG.
config STM32_USBHOST_PKTDUMP
bool "Packet Dump Debug"
default n
depends on USBHOST && STM32_OTGFS
---help---
Dump all incoming and outgoing USB packets. Depends on CONFIG_DEBUG.
endmenu
Reference in New Issue View Git Blame Copy Permalink