sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
92f44c5607
nuttx/net
History
Gregory Nutt 92f44c5607 Networking: Move net/inet/net_monitor.c to net/tcp/tcp_monitor.c in preparation for design change to fix monitoring of duplicated sockets.
2017-08-29 08:40:13 -06:00
..
arp Remove CONFIG_NET_MULTILINK. This increases code size by a little, but greatly reduces the complexity of the network code. 2017-08-08 15:26:09 -06:00
devif 6LoWPAN: The original, Contiki-based design used only a single buffer for reassemblying larger packets. This could be a problem issue for hub configurations which really need the capability concurrently reassemble multiple incoming streams concurrently. These was also a design issue in that the reassembly buffer could be corrupted by outgoing packets. The design was extended to support multiple reassembly buffers, each associated with the reassembly tag and source address. This assures that there can be be no corruption of the reassembly once it has started. 2017-08-26 10:00:47 -06:00
icmp Remove CONFIG_NETDEV_MULTINIC. This increases code size by a little, but greatly reduces the complexity of the network code. 2017-08-08 14:24:12 -06:00
icmpv6 net/icmpv6: Eliminate a warning 2017-08-10 07:27:40 -06:00
ieee802154 6LoWPAN: The original, Contiki-based design used only a single buffer for reassemblying larger packets. This could be a problem issue for hub configurations which really need the capability concurrently reassemble multiple incoming streams concurrently. These was also a design issue in that the reassembly buffer could be corrupted by outgoing packets. The design was extended to support multiple reassembly buffers, each associated with the reassembly tag and source address. This assures that there can be be no corruption of the reassembly once it has started. 2017-08-26 10:00:47 -06:00
igmp networking: Move a little more to the inet/ subdirectory. 2017-08-07 13:03:23 -06:00
inet Networking: Move net/inet/net_monitor.c to net/tcp/tcp_monitor.c in preparation for design change to fix monitoring of duplicated sockets. 2017-08-29 08:40:13 -06:00
ipforward 6LoWPAN: The original, Contiki-based design used only a single buffer for reassemblying larger packets. This could be a problem issue for hub configurations which really need the capability concurrently reassemble multiple incoming streams concurrently. These was also a design issue in that the reassembly buffer could be corrupted by outgoing packets. The design was extended to support multiple reassembly buffers, each associated with the reassembly tag and source address. This assures that there can be be no corruption of the reassembly once it has started. 2017-08-26 10:00:47 -06:00
local net/local: fix accept for local stream sockets 2017-07-31 07:36:54 -06:00
loopback Fix IPv6 loopback driver that depended on the removed g_ipv6_allonesaddr. Noted by Masayuki Ishikawa 2017-08-09 06:59:55 -06:00
neighbor Networking: Fix netdev_dev_lladdrsize. In some configurations, it could return the wrong size for the address of a packet radio. 2017-08-08 16:27:23 -06:00
netdev Networking: Rethink last fix. We can make this less protocol dependent. 2017-08-23 15:30:56 -06:00
pkt Networking: Remove driver based backlog support. This affects the entire network, but is used by only one driver. The only supported with of supported RX backlog is via common read-ahead buffering. 2017-08-21 06:28:59 -06:00
procfs Network procfs: procfs/net_procfs_route.c building error occur if CONFIG_NET_ROUTE is enabled. Fix suggested by Aleksandr Kazantsev 2017-08-22 10:21:07 -06:00
route Forgot to add a file in the last commit 2017-08-10 16:31:25 -06:00
sixlowpan Networking: Move net/inet/net_monitor.c to net/tcp/tcp_monitor.c in preparation for design change to fix monitoring of duplicated sockets. 2017-08-29 08:40:13 -06:00
socket Squashed commit of the following: 2017-08-19 08:48:52 -06:00
tcp Networking: Move net/inet/net_monitor.c to net/tcp/tcp_monitor.c in preparation for design change to fix monitoring of duplicated sockets. 2017-08-29 08:40:13 -06:00
udp Networking: Remove driver based backlog support. This affects the entire network, but is used by only one driver. The only supported with of supported RX backlog is via common read-ahead buffering. 2017-08-21 06:28:59 -06:00
usrsock network: Move USRSOCK specific code from from inet_sockif to usrsock_sockif: Add file missed in last commit 2017-07-31 09:49:19 -06:00
utils IPv6 forwarding logic must decrement the TTL and drop the packet if the hop limit is exceeded. 2017-07-04 07:05:42 -06:00
.gitignore .dSYM only needs to be in the same .gitignore files as .exe 2013-05-30 15:02:04 -06:00
Kconfig Squashed commit of the following: 2017-08-20 11:14:43 -06:00
Makefile Squashed commit of the following: 2017-08-19 08:48:52 -06:00
net_initialize.c Squashed commit of the following: 2017-08-19 08:48:52 -06:00
README.txt Squashed commit of the following: 2017-08-19 08:48:52 -06:00

README.txt 

README
======

Directory Structure
===================

  nuttx/
   |
   `- net/
       |
       +- arp        - Address resolution protocol (IPv4)
       +- devif      - Stack/device interface layer
       +- icmp       - Internet Control Message Protocol (IPv4)
       +- icmpv6     - Internet Control Message Protocol (IPv6)
       +- ieee802154 - PF_IEEE802154 socket interface
       +- inet       - PF_INET/PF_INET6 socket interface
       +- ipforward  - IP forwarding logic
       +- local      - Unix domain (local) sockets
       +- loopback   - Local loopback
       +- neighbor   - Neighbor Discovery Protocol (IPv6)
       +- netdev     - Socket network device interface
       +- pkt        - "Raw" packet socket support
       +- sixlowpan  - 6LoWPAN implementation
       +- socket     - BSD socket interface
       +- route      - Routing table support
       +- tcp        - Transmission Control Protocol
       +- udp        - User Datagram Protocol
       +- usrsock    - User socket API for user-space networking stack
       `- utils      - Miscellaneous utility functions


    +-------------------------------------------------------------------++------------------------+
    |                     Application layer                             || usrsock daemon         |
    +-------------------------------------------------------------------++------------------------+
    +-------------------------------------------------------------------++----------------+ +-----+
    |                   Socket layer (socket/)                          || /dev/usrsock   | |     |
    +-------------------------------------------------------------------++----------------+ |     |
    +------------++--------------------------------------------------++-------------------+ |     |
    |  Network   || Protocol stacks (arp, ipv6, icmp, pkt, tcp, udp) || usrsock/          | |     |
    |   Device   |+--------------------------------------------------++-------------------+ |     |
    | Interface  |+------------------------------------++---------------------------------+ |     |
    | (netdev/)  ||  Network Device Interface (devif/) || Utilities                       | |     |
    +------------++------------------------------------++---------------------------------+ |     |
    +----------------------------------------------------------------+                      |     |
    |                    Network Device Drivers                      |                      | HAL |
    +----------------------------------------------------------------+                      +-----+
    +----------------------------------------------------------------+ +--------------------------+
    |                    Networking Hardware                         | |  Hardware TCP/IP Stack   |
    +----------------------------------------------------------------+ +--------------------------+