sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
93914d8686
nuttx/arch/arm/src/a1x/a1x_lowputc.c

290 lines
10 KiB
C
Raw Blame History

/**************************************************************************
* arch/arm/src/a1x/a1x_lowputc.c
*
* Copyright (C) 2013 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
**************************************************************************/
/**************************************************************************
* Included Files
**************************************************************************/
#include <nuttx/config.h>
#include <stdint.h>
#include <arch/irq.h>
#include <arch/board/board.h>
#include "up_internal.h"
#include "up_arch.h"
#include "a1x_config.h"
#include "chip/a1x_uart.h"
#include "a1x_pio.h"
/**************************************************************************
* Private Definitions
**************************************************************************/
/* Select UART parameters for the selected console */
#if defined(CONFIG_UART0_SERIAL_CONSOLE)
# define CONSOLE_BASE A1X_UART0_VADDR
# define CONSOLE_BAUD CONFIG_UART0_BAUD
# define CONSOLE_BITS CONFIG_UART0_BITS
# define CONSOLE_PARITY CONFIG_UART0_PARITY
# define CONSOLE_2STOP CONFIG_UART0_2STOP
#elif defined(CONFIG_UART1_SERIAL_CONSOLE)
# define CONSOLE_BASE A1X_UART1_VADDR
# define CONSOLE_BAUD CONFIG_UART1_BAUD
# define CONSOLE_BITS CONFIG_UART1_BITS
# define CONSOLE_PARITY CONFIG_UART1_PARITY
# define CONSOLE_2STOP CONFIG_UART1_2STOP
#elif defined(CONFIG_UART2_SERIAL_CONSOLE)
# define CONSOLE_BASE A1X_UART2_VADDR
# define CONSOLE_BAUD CONFIG_UART2_BAUD
# define CONSOLE_BITS CONFIG_UART2_BITS
# define CONSOLE_PARITY CONFIG_UART2_PARITY
# define CONSOLE_2STOP CONFIG_UART2_2STOP
#elif defined(CONFIG_UART3_SERIAL_CONSOLE)
# define CONSOLE_BASE A1X_UART3_VADDR
# define CONSOLE_BAUD CONFIG_UART3_BAUD
# define CONSOLE_BITS CONFIG_UART3_BITS
# define CONSOLE_PARITY CONFIG_UART3_PARITY
# define CONSOLE_2STOP CONFIG_UART3_2STOP
#elif defined(CONFIG_UART4_SERIAL_CONSOLE)
# define CONSOLE_BASE A1X_UART4_VADDR
# define CONSOLE_BAUD CONFIG_UART4_BAUD
# define CONSOLE_BITS CONFIG_UART4_BITS
# define CONSOLE_PARITY CONFIG_UART4_PARITY
# define CONSOLE_2STOP CONFIG_UART4_2STOP
#elif defined(CONFIG_UART5_SERIAL_CONSOLE)
# define CONSOLE_BASE A1X_UART5_VADDR
# define CONSOLE_BAUD CONFIG_UART5_BAUD
# define CONSOLE_BITS CONFIG_UART5_BITS
# define CONSOLE_PARITY CONFIG_UART5_PARITY
# define CONSOLE_2STOP CONFIG_UART5_2STOP
#elif defined(CONFIG_UART6_SERIAL_CONSOLE)
# define CONSOLE_BASE A1X_UART6_VADDR
# define CONSOLE_BAUD CONFIG_UART6_BAUD
# define CONSOLE_BITS CONFIG_UART6_BITS
# define CONSOLE_PARITY CONFIG_UART6_PARITY
# define CONSOLE_2STOP CONFIG_UART6_2STOP
#elif defined(CONFIG_UART7_SERIAL_CONSOLE)
# define CONSOLE_BASE A1X_UART7_VADDR
# define CONSOLE_BAUD CONFIG_UART7_BAUD
# define CONSOLE_BITS CONFIG_UART7_BITS
# define CONSOLE_PARITY CONFIG_UART7_PARITY
# define CONSOLE_2STOP CONFIG_UART7_2STOP
#elif defined(HAVE_SERIAL_CONSOLE)
# error "No CONFIG_UARTn_SERIAL_CONSOLE Setting"
#endif
/* Get word length setting for the console */
#if CONSOLE_BITS == 5
# define CONSOLE_LCR_DLS UART_LCR_DLS_5BITS
#elif CONSOLE_BITS == 6
# define CONSOLE_LCR_DLS UART_LCR_DLS_6BITS
#elif CONSOLE_BITS == 7
# define CONSOLE_LCR_DLS UART_LCR_DLS_7BITS
#elif CONSOLE_BITS == 8
# define CONSOLE_LCR_DLS UART_LCR_DLS_8BITS
#elif defined(HAVE_SERIAL_CONSOLE)
# error "Invalid CONFIG_UARTn_BITS setting for console "
#endif
/* Get parity setting for the console */
#if CONSOLE_PARITY == 0
# define CONSOLE_LCR_PAR 0
#elif CONSOLE_PARITY == 1
# define CONSOLE_LCR_PAR UART_LCR_PEN
#elif CONSOLE_PARITY == 2
# define CONSOLE_LCR_PAR (UART_LCR_PEN | UART_LCR_EPS)
#elif CONSOLE_PARITY == 3
#elif defined(HAVE_SERIAL_CONSOLE)
# error "Invalid CONFIG_UARTn_PARITY setting for CONSOLE"
#endif
/* Get stop-bit setting for the console and UART0-3 */
#if CONSOLE_2STOP != 0
# define CONSOLE_LCR_STOP UART_LCR_STOP
#else
# define CONSOLE_LCR_STOP 0
#endif
/* LCR and FCR values for the console */
#define CONSOLE_LCR_VALUE (CONSOLE_LCR_DLS | CONSOLE_LCR_PAR | CONSOLE_LCR_STOP)
#define CONSOLE_FCR_VALUE (UART_FCR_RT_HALF | UART_FCR_XFIFOR |\
UART_FCR_RFIFOR | UART_FCR_FIFOE)
/* SCLK is the UART input clock */
#define A1X_SCLK 0
#warning What is the correct value of SCLK
/* The output baud rate is equal to the serial clock (SCLK) frequency divided
* by sixteen times the value of the baud rate divisor, as follows:
*
* baud rate = Fsclk / (16 * divisor).
*/
#define CONSOLE_DL (A1X_SCLK / (CONSOLE_BAUD << 4))
/**************************************************************************
* Private Types
**************************************************************************/
/**************************************************************************
* Private Function Prototypes
**************************************************************************/
/**************************************************************************
* Global Variables
**************************************************************************/
/**************************************************************************
* Private Variables
**************************************************************************/
/**************************************************************************
* Private Functions
**************************************************************************/
/**************************************************************************
* Public Functions
**************************************************************************/
/**************************************************************************
* Name: up_lowputc
*
* Description:
* Output one byte on the serial console
*
**************************************************************************/
void up_lowputc(char ch)
{
#if defined HAVE_UART_DEVICE && defined HAVE_SERIAL_CONSOLE
/* Wait for the transmitter to be available */
while ((getreg32(CONSOLE_BASE+A1X_UART_LSR_OFFSET) & UART_LSR_THRE) == 0);
/* Send the character */
putreg32((uint32_t)ch, CONSOLE_BASE+A1X_UART_THR_OFFSET);
#endif
}
/**************************************************************************
* Name: a1x_lowsetup
*
* Description:
* This performs basic initialization of the UART used for the serial
* console. Its purpose is to get the console output available as soon
* as possible.
*
**************************************************************************/
void a1x_lowsetup(void)
{
#ifdef HAVE_UART_DEVICE
/* Enable power and clocking to the UART peripheral */
#warning Missing logic
/* Configure UART pins for the selected CONSOLE. If there are multiple
* pin options for a given UART, the the applicable option must be
* disambiguated in the board.h header file.
*/
#if defined(CONFIG_UART0_SERIAL_CONSOLE)
a1x_pio_config(PIO_UART0_TX);
a1x_pio_config(PIO_UART0_RX);
#elif defined(CONFIG_UART1_SERIAL_CONSOLE)
a1x_pio_config(PIO_UART1_TX);
a1x_pio_config(PIO_UART1_RX);
#elif defined(CONFIG_UART2_SERIAL_CONSOLE)
a1x_pio_config(PIO_UART2_TX);
a1x_pio_config(PIO_UART2_RX);
#elif defined(CONFIG_UART3_SERIAL_CONSOLE)
a1x_pio_config(PIO_UART3_TX);
a1x_pio_config(PIO_UART3_RX);
#elif defined(CONFIG_UART4_SERIAL_CONSOLE)
a1x_pio_config(PIO_UART4_TX);
a1x_pio_config(PIO_UART4_RX);
#elif defined(CONFIG_UART5_SERIAL_CONSOLE)
a1x_pio_config(PIO_UART5_TX);
a1x_pio_config(PIO_UART5_RX);
#elif defined(CONFIG_UART6_SERIAL_CONSOLE)
a1x_pio_config(PIO_UART6_TX);
a1x_pio_config(PIO_UART6_RX);
#elif defined(CONFIG_UART7_SERIAL_CONSOLE)
a1x_pio_config(PIO_UART7_TX);
a1x_pio_config(PIO_UART7_RX);
#endif
/* Configure the console (only) */
#if defined(HAVE_SERIAL_CONSOLE) && !defined(CONFIG_SUPPRESS_UART_CONFIG)
/* Clear fifos */
putreg32(UART_FCR_RFIFOR|UART_FCR_XFIFOR, CONSOLE_BASE+A1X_UART_FCR_OFFSET);
/* Set trigger */
putreg32(UART_FCR_FIFOE|UART_FCR_RT_HALF, CONSOLE_BASE+A1X_UART_FCR_OFFSET);
/* Set up the LCR and set DLAB=1 */
putreg32(CONSOLE_LCR_VALUE|UART_LCR_DLAB, CONSOLE_BASE+A1X_UART_LCR_OFFSET);
/* Set the BAUD divisor */
putreg32(CONSOLE_DL >> 8, CONSOLE_BASE+A1X_UART_DLH_OFFSET);
putreg32(CONSOLE_DL & 0xff, CONSOLE_BASE+A1X_UART_DLL_OFFSET);
/* Clear DLAB */
putreg32(CONSOLE_LCR_VALUE, CONSOLE_BASE+A1X_UART_LCR_OFFSET);
/* Configure the FIFOs */
putreg32(UART_FCR_RT_HALF|UART_FCR_XFIFOR|UART_FCR_RFIFOR|UART_FCR_FIFOE,
CONSOLE_BASE+A1X_UART_FCR_OFFSET);
#endif
#endif /* HAVE_UART_DEVICE */
}
Reference in New Issue View Git Blame Copy Permalink