nuttx/arch/arm/src/samd5e5/sam_usart.h
Xiang Xiao 54e630e14d arch: Merge up_arch.h into up_internal.h
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-03-14 09:32:17 +02:00

173 lines
5.6 KiB
C

/****************************************************************************
* arch/arm/src/samd5e5/sam_usart.h
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership. The
* ASF licenses this file to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance with the
* License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations
* under the License.
*
****************************************************************************/
#ifndef __ARCH_ARM_SRC_SAMD5E5_SAM_USART_H
#define __ARCH_ARM_SRC_SAMD5E5_SAM_USART_H
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <stdint.h>
#include <stdbool.h>
#include <arch/chip/chip.h>
#include "arm_internal.h"
#include "hardware/sam_usart.h"
#include "sam_config.h"
#include "sam_port.h"
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
/* Pick the console USART configuration */
#if defined(CONFIG_USART0_SERIAL_CONSOLE)
# define g_consoleconfig (g_usart0config)
#elif defined(CONFIG_USART1_SERIAL_CONSOLE)
# define g_consoleconfig (g_usart1config)
#elif defined(CONFIG_USART2_SERIAL_CONSOLE)
# define g_consoleconfig (g_usart2config)
#elif defined(CONFIG_USART3_SERIAL_CONSOLE)
# define g_consoleconfig (g_usart3config)
#elif defined(CONFIG_USART4_SERIAL_CONSOLE)
# define g_consoleconfig (g_usart4config)
#elif defined(CONFIG_USART5_SERIAL_CONSOLE)
# define g_consoleconfig (g_usart5config)
#elif defined(CONFIG_USART6_SERIAL_CONSOLE)
# define g_consoleconfig (g_usart6config)
#elif defined(CONFIG_USART7_SERIAL_CONSOLE)
# define g_consoleconfig (g_usart7config)
#else
# undef g_consoleconfig
#endif
/****************************************************************************
* Public Types
****************************************************************************/
/* This structure describes the static configuration of a USART */
struct sam_usart_config_s
{
uint8_t sercom; /* Identifies the SERCOM peripheral */
uint8_t parity; /* 0=none, 1=odd, 2=even */
uint8_t bits; /* Number of bits (5-9) */
uint8_t txirq; /* Tx SERCOM IRQ number */
uint8_t rxirq; /* Rx SERCOM IRQ number */
uint8_t coregen; /* Core GCLK generator */
uint8_t slowgen; /* Slow GCLK generator */
uint8_t stopbits2 : 1; /* True: Configure with 2 stop bits instead of 1 */
uint8_t corelock : 1; /* True: Lock the CORE clock */
uint32_t baud; /* Configured baud */
port_pinset_t pad0; /* Pin configuration for PAD0 */
port_pinset_t pad1; /* Pin configuration for PAD1 */
port_pinset_t pad2; /* Pin configuration for PAD2 */
port_pinset_t pad3; /* Pin configuration for PAD3 */
uint32_t muxconfig; /* Pad multiplexing configuration */
uint32_t frequency; /* Source clock frequency */
uintptr_t base; /* SERCOM base address */
};
/****************************************************************************
* Inline Functions
****************************************************************************/
/****************************************************************************
* Name: sam_wait_synchronization
*
* Description:
* Return true is the SERCOM USART reports that it is synchronizing.
*
****************************************************************************/
#ifdef SAMD5E5_HAVE_USART
static inline
bool usart_syncbusy(const struct sam_usart_config_s * const config)
{
return false;
}
#endif
/****************************************************************************
* Public Data
****************************************************************************/
#ifndef __ASSEMBLY__
#undef EXTERN
#if defined(__cplusplus)
#define EXTERN extern "C"
extern "C"
{
#else
#define EXTERN extern
#endif
#ifdef SAMD5E5_HAVE_USART0
EXTERN const struct sam_usart_config_s g_usart0config;
#endif
#ifdef SAMD5E5_HAVE_USART1
EXTERN const struct sam_usart_config_s g_usart1config;
#endif
#ifdef SAMD5E5_HAVE_USART2
EXTERN const struct sam_usart_config_s g_usart2config;
#endif
#ifdef SAMD5E5_HAVE_USART3
EXTERN const struct sam_usart_config_s g_usart3config;
#endif
#ifdef SAMD5E5_HAVE_USART4
EXTERN const struct sam_usart_config_s g_usart4config;
#endif
#ifdef SAMD5E5_HAVE_USART5
EXTERN const struct sam_usart_config_s g_usart5config;
#endif
#ifdef SAMD5E5_HAVE_USART6
EXTERN const struct sam_usart_config_s g_usart6config;
#endif
#ifdef SAMD5E5_HAVE_USART7
EXTERN const struct sam_usart_config_s g_usart7config;
#endif
EXTERN const struct sam_usart_config_s *g_usartconfig[SAMD5E5_NSERCOM];
/****************************************************************************
* Public Functions Prototypes
****************************************************************************/
#undef EXTERN
#if defined(__cplusplus)
}
#endif
#endif /* __ASSEMBLY__ */
#endif /* __ARCH_ARM_SRC_SAMD5E5_SAM_USART_H */