195 lines
6.9 KiB
C
195 lines
6.9 KiB
C
/************************************************************************************
|
|
* configs/imxrt1050/include/board.h
|
|
*
|
|
* Copyright (C) 2018 Gregory Nutt. All rights reserved.
|
|
* Author: Gregory Nutt <gnutt@nuttx.org>
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
*
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in
|
|
* the documentation and/or other materials provided with the
|
|
* distribution.
|
|
* 3. Neither the name NuttX nor the names of its contributors may be
|
|
* used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
|
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
|
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
|
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
|
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
|
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
|
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
* POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
************************************************************************************/
|
|
|
|
#ifndef __CONFIGS_IMXRT1050_EVK_INCLUDE_BOARD_H
|
|
#define __CONFIGS_IMXRT1050_EVK_INCLUDE_BOARD_H
|
|
|
|
/************************************************************************************
|
|
* Included Files
|
|
************************************************************************************/
|
|
|
|
#include <nuttx/config.h>
|
|
|
|
/************************************************************************************
|
|
* Pre-processor Definitions
|
|
************************************************************************************/
|
|
|
|
/* Clocking *************************************************************************/
|
|
|
|
/* Set VDD_SOC to 1.5V */
|
|
|
|
#define IMXRT_VDD_SOC (0x12)
|
|
|
|
/* Set Arm PLL (PLL1) to 1200Mhz = (24Mhz * 100) / 2
|
|
* Set Sys PLL (PLL2) to 528Mhz = 1
|
|
* (0 = 20 * 24Mhz = 480Mhz
|
|
* 1 = 22 * 24Mhz = 528Mhz)
|
|
*
|
|
* Arm clock divider = 2 -> Arm Clock = 600Mhz
|
|
* AHB clock divider = 1
|
|
* IPG clock divider = 4
|
|
*/
|
|
|
|
#define BOARD_XTAL_FREQUENCY 24000000
|
|
|
|
#define IMXRT_ARM_PLL_SELECT (100)
|
|
#define IMXRT_SYS_PLL_SELECT (1)
|
|
#define IMXRT_ARM_CLOCK_DIVIDER (1)
|
|
#define IMXRT_AHB_CLOCK_DIVIDER (0)
|
|
#define IMXRT_IPG_CLOCK_DIVIDER (3)
|
|
#define IMXRT_SEMC_CLOCK_DIVIDER (7)
|
|
|
|
#define BOARD_CPU_FREQUENCY \
|
|
(BOARD_XTAL_FREQUENCY * IMXRT_ARM_PLL_SELECT) / (IMXRT_ARM_CLOCK_DIVIDER + 1)
|
|
|
|
/* LED definitions ******************************************************************/
|
|
/* There are four LED status indicators located on the EVK Board. The functions of
|
|
* these LEDs include:
|
|
*
|
|
* - Main Power Supply(D3)
|
|
* Green: DC 5V main supply is normal.
|
|
* Red: J2 input voltage is over 5.6V.
|
|
* Off: The board is not powered.
|
|
* - Reset RED LED(D15)
|
|
* - OpenSDA LED(D16)
|
|
* - USER LED(D18)
|
|
*
|
|
* Only a single LED, D18, is under software control.
|
|
*/
|
|
|
|
/* LED index values for use with board_userled() */
|
|
|
|
#define BOARD_USERLED 0
|
|
#define BOARD_NLEDS 1
|
|
|
|
/* LED bits for use with board_userled_all() */
|
|
|
|
#define BOARD_USERLED_BIT (1 << BOARD_USERLED)
|
|
|
|
/* This LED is not used by the board port unless CONFIG_ARCH_LEDS is
|
|
* defined. In that case, the usage by the board port is defined in
|
|
* include/board.h and src/imxrt_autoleds.c. The LED is used to encode
|
|
* OS-related events as follows:
|
|
*
|
|
* -------------------- ----------------------------- ------
|
|
* SYMBOL Meaning LED
|
|
* -------------------- ----------------------------- ------ */
|
|
|
|
#define LED_STARTED 0 /* NuttX has been started OFF */
|
|
#define LED_HEAPALLOCATE 0 /* Heap has been allocated OFF */
|
|
#define LED_IRQSENABLED 0 /* Interrupts enabled OFF */
|
|
#define LED_STACKCREATED 1 /* Idle stack created ON */
|
|
#define LED_INIRQ 2 /* In an interrupt N/C */
|
|
#define LED_SIGNAL 2 /* In a signal handler N/C */
|
|
#define LED_ASSERTION 2 /* An assertion failed N/C */
|
|
#define LED_PANIC 3 /* The system has crashed FLASH */
|
|
#undef LED_IDLE /* Not used */
|
|
|
|
/* Thus if the LED is statically on, NuttX has successfully booted and is,
|
|
* apparently, running normally. If the LED is flashing at approximately
|
|
* 2Hz, then a fatal error has been detected and the system has halted.
|
|
*/
|
|
|
|
/* Button definitions ***************************************************************/
|
|
/* The IMXRT board has one external user button
|
|
*
|
|
* 1. SW8 (IRQ88) GPIO5-00
|
|
*/
|
|
|
|
#define BUTTON_SW8 0
|
|
|
|
#define BUTTON_SW8_BIT (1 << BUTTON_SW8)
|
|
|
|
/* PIO Disambiguation ***************************************************************/
|
|
/* LPUARTs
|
|
*
|
|
* Virtual console port provided by OpenSDA:
|
|
*
|
|
* UART1_TXD GPIO_AD_B0_12 LPUART1_TX
|
|
* UART1_RXD GPIO_AD_B0_13 LPUART1_RX
|
|
*
|
|
* NOTE: There are no alternative pin configurations for LPUART1.
|
|
*
|
|
* Arduino RS-232 Shield:
|
|
*
|
|
* J22 D0 UART_RX/D0 GPIO_AD_B1_07 LPUART3_RX
|
|
* J22 D1 UART_TX/D1 GPIO_AD_B1_06 LPUART3_TX
|
|
*/
|
|
|
|
#define GPIO_LPUART3_RX GPIO_LPUART3_RX_1 /* GPIO_AD_B1_07 */
|
|
#define GPIO_LPUART3_TX GPIO_LPUART3_TX_1 /* GPIO_AD_B1_06 */
|
|
|
|
/* LPI2Cs
|
|
*
|
|
* Arduino Connector
|
|
*
|
|
* J23 A4 A4/ADC4/SDA GPIO_AD_B1_01 LPI2C1_SDA
|
|
* J23 A5 A5/ADC5/SCL GPIO_AD_B1_00 LPI2C1_SCL
|
|
*/
|
|
|
|
#define GPIO_LPI2C1_SDA GPIO_LPI2C1_SDA_2 /* GPIO_AD_B1_01 */
|
|
#define GPIO_LPI2C1_SCL GPIO_LPI2C1_SCL_2 /* GPIO_AD_B1_00 */
|
|
|
|
/************************************************************************************
|
|
* Public Types
|
|
************************************************************************************/
|
|
|
|
/************************************************************************************
|
|
* Public Data
|
|
************************************************************************************/
|
|
|
|
#ifndef __ASSEMBLY__
|
|
|
|
#undef EXTERN
|
|
#if defined(__cplusplus)
|
|
#define EXTERN extern "C"
|
|
extern "C"
|
|
{
|
|
#else
|
|
#define EXTERN extern
|
|
#endif
|
|
|
|
/************************************************************************************
|
|
* Public Functions
|
|
************************************************************************************/
|
|
|
|
#undef EXTERN
|
|
#if defined(__cplusplus)
|
|
}
|
|
#endif
|
|
|
|
#endif /* __ASSEMBLY__ */
|
|
#endif /* __CONFIGS_IMXRT1050_EVK_INCLUDE_BOARD_H */
|