241 lines
8.5 KiB
C
241 lines
8.5 KiB
C
/****************************************************************************
|
|
* boards/arm/stm32f0l0g0/nucleo-g070rb/include/board.h
|
|
*
|
|
* Copyright (C) 2019 Gregory Nutt. All rights reserved.
|
|
* Author: Daniel Pereira Volpato <dpo@certi.org.br>
|
|
*
|
|
* Based on: boards/arm/stm32f0l0g0/nucleo-g071rb/include/board.h
|
|
* Author: Mateusz Szafoni <raiden00@railab.me>
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
*
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in
|
|
* the documentation and/or other materials provided with the
|
|
* distribution.
|
|
* 3. Neither the name NuttX nor the names of its contributors may be
|
|
* used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
|
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
|
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
|
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
|
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
|
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
|
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
* POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
****************************************************************************/
|
|
|
|
#ifndef __BOARDS_ARM_STM32F0L0G0_NUCLEO_G070RB_INCLUDE_BOARD_H
|
|
#define __BOARDS_ARM_STM32F0L0G0_NUCLEO_G070RB_INCLUDE_BOARD_H
|
|
|
|
/****************************************************************************
|
|
* Included Files
|
|
****************************************************************************/
|
|
|
|
#include <nuttx/config.h>
|
|
|
|
#ifndef __ASSEMBLY__
|
|
# include <stdint.h>
|
|
# include <stdbool.h>
|
|
#endif
|
|
|
|
/****************************************************************************
|
|
* Pre-processor Definitions
|
|
****************************************************************************/
|
|
|
|
/* Clocking *****************************************************************/
|
|
|
|
/* HSI - Internal 16 MHz RC Oscillator
|
|
* LSI - 32 KHz RC
|
|
* HSE - 8 MHz from MCO output of ST-LINK (disabled by default)
|
|
* LSE - 32.768 kHz
|
|
*/
|
|
|
|
#define STM32_BOARD_XTAL 8000000ul /* 8MHz */
|
|
|
|
#define STM32_HSI_FREQUENCY 16000000ul /* 16MHz */
|
|
#define STM32_LSI_FREQUENCY 32000 /* Between 30kHz and 60kHz */
|
|
#define STM32_HSE_FREQUENCY STM32_BOARD_XTAL
|
|
#define STM32_LSE_FREQUENCY 32768 /* X2 on board */
|
|
|
|
/* Main PLL Configuration.
|
|
*
|
|
* PLL_VCO = (PLL_SOURCE_FREQUENCY / PLL_M) * PLL_N
|
|
* SYSCLK = PLLCLK = PLLR = PLL_VCO / PLL_DIV_R
|
|
* PLLP = PLL_VCO / PLL_DIV_P
|
|
*
|
|
* Subject to:
|
|
*
|
|
* PLL_SOURCE_FREQUENCY is one of {STM32_HSE_FREQUENCY, STM32_HSI_FREQUENCY}
|
|
*
|
|
* 1 <= PLL_DIV_M <= 8
|
|
* 8 <= PLL_DIV_N <= 86
|
|
* 2 <= PLL_DIV_P <= 32
|
|
* 2 <= PLL_DIV_R <= 8
|
|
* 4 MHz <= PLL_SOURCE_FREQUENCY <= 48 MHz
|
|
* 96 MHz <= PLL_VCO <= 344MHz
|
|
*/
|
|
|
|
/* Considering:
|
|
* - PLL_SOURCE_FREQUENCY = STM32_HSI_FREQUENCY = 16,000,000
|
|
* - PLL_DIV_M = 1
|
|
* - PLL_DIV_N = 8
|
|
* - PLL_DIV_R = 2
|
|
* - PLL_DIV_P = 2
|
|
*
|
|
* PLL_VCO = (16,000,000 / 1) * 8 = 128 MHz
|
|
* PLLP = (PLL_VCO / 2) = 64 MHz
|
|
* PLLR = (PLL_VCO / 2) = 64 MHz
|
|
*/
|
|
|
|
#define STM32_PLLCFG_PLLSRC RCC_PLLCFG_PLLSRC_HSI
|
|
#define STM32_PLLCFG_PLLCFG (RCC_PLLCFG_PLLPEN | \
|
|
RCC_PLLCFG_PLLREN)
|
|
|
|
#define STM32_PLLCFG_PLLM RCC_PLLCFG_PLLM(1)
|
|
#define STM32_PLLCFG_PLLN RCC_PLLCFG_PLLN(8)
|
|
#define STM32_PLLCFG_PLLP RCC_PLLCFG_PLLP(2)
|
|
#define STM32_PLLCFG_PLLR RCC_PLLCFG_PLLR(2)
|
|
|
|
#define STM32_VCO_FREQUENCY ((STM32_HSI_FREQUENCY / 1) * 8)
|
|
#define STM32_PLLP_FREQUENCY (STM32_VCO_FREQUENCY / 2)
|
|
#define STM32_PLLR_FREQUENCY (STM32_VCO_FREQUENCY / 2)
|
|
|
|
/* Use the PLL and set the SYSCLK source to be the PLLR (64 MHz) */
|
|
|
|
#define STM32_SYSCLK_SW RCC_CFGR_SW_PLL
|
|
#define STM32_SYSCLK_SWS RCC_CFGR_SWS_PLL
|
|
#define STM32_SYSCLK_FREQUENCY (STM32_PLLR_FREQUENCY)
|
|
|
|
/* AHB clock (HCLK) is SYSCLK (64 MHz) */
|
|
|
|
#define STM32_RCC_CFGR_HPRE RCC_CFGR_HPRE_SYSCLK
|
|
#define STM32_HCLK_FREQUENCY STM32_SYSCLK_FREQUENCY
|
|
#define STM32_BOARD_HCLK STM32_HCLK_FREQUENCY
|
|
|
|
/* APB1 clock (PCLK1) is HCLK (64 MHz) */
|
|
|
|
#define STM32_RCC_CFGR_PPRE1 RCC_CFGR_PPRE1_HCLK
|
|
#define STM32_PCLK1_FREQUENCY STM32_HCLK_FREQUENCY
|
|
|
|
/* Timer clock frequencies */
|
|
|
|
/* Timers driven from APB1. Frequency = PCLK1 */
|
|
|
|
#define STM32_APB1_TIM3_CLKIN (STM32_PCLK1_FREQUENCY)
|
|
#define STM32_APB1_TIM6_CLKIN (STM32_PCLK1_FREQUENCY)
|
|
#define STM32_APB1_TIM7_CLKIN (STM32_PCLK1_FREQUENCY)
|
|
|
|
/* Timers driven from APB2 is equal to PCLK1 */
|
|
|
|
#define STM32_APB2_TIM1_CLKIN (STM32_PCLK1_FREQUENCY)
|
|
#define STM32_APB2_TIM14_CLKIN (STM32_PCLK1_FREQUENCY)
|
|
#define STM32_APB2_TIM15_CLKIN (STM32_PCLK1_FREQUENCY)
|
|
#define STM32_APB2_TIM16_CLKIN (STM32_PCLK1_FREQUENCY)
|
|
#define STM32_APB2_TIM17_CLKIN (STM32_PCLK1_FREQUENCY)
|
|
|
|
/* LED definitions **********************************************************/
|
|
|
|
/* Nucleo G070RB board has three LEDs. Two of these are controlled by
|
|
* logic on the board and are not available for software control:
|
|
*
|
|
* LD1 COM: LD1 default status is red. LD1 turns to green to indicate that
|
|
* communications are in progress between the PC and the
|
|
* ST-LINK/V2-1.
|
|
* LD3 5V_PWR: green LED indicates that the board is powered by a 5V source.
|
|
*
|
|
* And one can be controlled by software:
|
|
*
|
|
* User LD4: green LED is a user LED connected to STM32 I/O PA5.
|
|
*
|
|
* If CONFIG_ARCH_LEDS is not defined, then the user can control the LED in
|
|
* any way. The following definition is used to access the LED.
|
|
*/
|
|
|
|
/* LED index values for use with board_userled() */
|
|
|
|
#define BOARD_LED1 0 /* User LD4 */
|
|
#define BOARD_NLEDS 1
|
|
|
|
/* LED bits for use with board_userled_all() */
|
|
|
|
#define BOARD_LED1_BIT (1 << BOARD_LED1)
|
|
|
|
/* If CONFIG_ARCH_LEDs is defined, then NuttX will control the LED on the
|
|
* board. The following definitions describe how NuttX controls
|
|
* the LED:
|
|
*
|
|
* SYMBOL Meaning LED1 state
|
|
* ------------------ ----------------------- ----------
|
|
* LED_STARTED NuttX has been started OFF
|
|
* LED_HEAPALLOCATE Heap has been allocated OFF
|
|
* LED_IRQSENABLED Interrupts enabled OFF
|
|
* LED_STACKCREATED Idle stack created ON
|
|
* LED_INIRQ In an interrupt No change
|
|
* LED_SIGNAL In a signal handler No change
|
|
* LED_ASSERTION An assertion failed No change
|
|
* LED_PANIC The system has crashed Blinking
|
|
* LED_IDLE STM32 is is sleep mode Not used
|
|
*/
|
|
|
|
#define LED_STARTED 0
|
|
#define LED_HEAPALLOCATE 0
|
|
#define LED_IRQSENABLED 0
|
|
#define LED_STACKCREATED 1
|
|
#define LED_INIRQ 2
|
|
#define LED_SIGNAL 2
|
|
#define LED_ASSERTION 2
|
|
#define LED_PANIC 1
|
|
|
|
/* Button definitions *******************************************************/
|
|
|
|
/* Nucleo G070RB board supports two buttons; only one button is controllable
|
|
* by software:
|
|
*
|
|
* B1 USER: user button connected to STM32 I/O PC13.
|
|
* B2 RESET: push button connected to NRST; used to RESET the MCU.
|
|
*/
|
|
|
|
#define BUTTON_USER 0 /* User B1 */
|
|
#define NUM_BUTTONS 1
|
|
|
|
#define BUTTON_USER_BIT (1 << BUTTON_USER)
|
|
|
|
/* Alternate function pin selections ****************************************/
|
|
|
|
/* TIM */
|
|
|
|
#define GPIO_TIM1_CH2OUT GPIO_TIM1_CH2OUT_2 /* PB3 - CN9 4 (D3) */
|
|
#define GPIO_TIM3_CH1OUT GPIO_TIM3_CH1OUT_2 /* PB4 - CN9 6 (D5) */
|
|
#define GPIO_TIM3_CH2OUT GPIO_TIM3_CH2OUT_3 /* PC7 - CN5 2 (D9) */
|
|
#define GPIO_TIM3_CH3OUT GPIO_TIM3_CH3OUT_1 /* PB0 - CN5 3 (D10) */
|
|
|
|
/* USART */
|
|
|
|
/* By default the USART2 is connected to STLINK Virtual COM Port:
|
|
* USART2_RX - PA3
|
|
* USART2_TX - PA2
|
|
*/
|
|
|
|
#define GPIO_USART2_RX GPIO_USART2_RX_1 /* PA3 */
|
|
#define GPIO_USART2_TX GPIO_USART2_TX_1 /* PA2 */
|
|
|
|
/* DMA channels *************************************************************/
|
|
|
|
/* ADC */
|
|
|
|
/* TODO ADC */
|
|
|
|
#endif /* __BOARDS_ARM_STM32F0L0G0_NUCLEO_G070RB_INCLUDE_BOARD_H */
|