z80sim README
^^^^^^^^^^^^^
This port uses a primitive, emulated Z80 and the SDCC toolchain.
The instruction set emulator can be found in the NuttX GIT at
http://sourceforge.net/p/nuttx/git/ci/master/tree/misc/sims/z80sim
The SDCC toolchain is available from http://sdcc.sourceforge.net/. All
testing has been performed using version 2.6.0 of the SDCC toolchain.
Contents
^^^^^^^^
o Configuring NuttX
o Reconfiguring NuttX
o Reconfiguring for Linux, OSX, or Cygwin
o SDCC
o Building the SDCC toolchain
Configuring NuttX
^^^^^^^^^^^^^^^^^
ostest
This configuration performs a simple, minimal OS test using
examples/ostest. This can be configurated as follows:
1) From a POSIX window:
cd tools
./configure.sh z80sim/ostest
2) From a CMD.exe window
setenv.bat
NOTES:
1. This configuration uses the mconf-based configuration tool. See the
"Reconfiguring" section below for information about changing this
configuration.
2. The default setup for this configuration uses a windows native build.
See the section entitled "Reconfiguring for Linux, OSX, or Cygwin"
which will give you the steps you would need to do to convert this
configuration to build in other, Unix-like environments.
3. This configuration was last verified sucessfully prior to the
the configure to Kconfig/mconf tool using SDCC 2.6.0 built to run
natively under Cygwin. The current build requires ca. 3.2.1 SDCC.
nsh
This configuration file builds NSH (examples/nsh). This
configuration is not functional due to issues with use of the
simulated serial driver (see the TODO list).
This configuration can be selected by:
1) From a POSIX window:
cd tools
./configure.sh z80sim/nsh
2) From a CMD.exe window
setenv.bat
NOTES:
1. This configuration uses the mconf-based configuration tool. See the
"Reconfiguring" section below for information about changing this
configuration.
2. The default setup for this configuration uses a windows native build.
See the section entitled "Reconfiguring for Linux, OSX, or Cygwin"
which will give you the steps you would need to do to convert this
configuration to build in other, Unix-like environments.
3. This configuration was last verified sucessfully prior to the
the configure to Kconfig/mconf tool using SDCC 2.6.0 built to run
natively under Cygwin.nsh/defconfig:CONFIG_BOARD_LOOPSPERMSEC
pashello
Configures to use examples/pashello for execution from FLASH
See examples/README.txt for information about pashello.
This configuration is not usable because the resulting binary
is too large for the z80 address space.
This configuration can be selected by:
1) From a POSIX window:
cd tools
./configure.sh z80sim/pashello
2) From a CMD.exe window
setenv.bat
NOTES:
1. This configuration uses the mconf-based configuration tool. See the
"Reconfiguring" section below for information about changing this
configuration.
2. The default setup for this configuration uses a windows native build.
See the section entitled "Reconfiguring for Linux, OSX, or Cygwin"
which will give you the steps you would need to do to convert this
configuration to build in other, Unix-like environments.
3. This configuration was last verified sucessfully prior to the
the configure to Kconfig/mconf tool using SDCC 2.6.0 built to run
natively under Cygwin.nsh/defconfig:CONFIG_BOARD_LOOPSPERMSEC
Reconfiguring NuttX
^^^^^^^^^^^^^^^^^^^
These configurations all use the kconfig-frontends, mconf-based configuration
tool. To change this configuration using that tool, you should:
a. Build and install the kconfig-mconf tool. See nuttx/README.txt and
misc/tools/README.txt
b. Execute 'make menuconfig' in nuttx/ in order to start the reconfiguration
process.
Reconfiguring for Linux, OSX, or Cygwin
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
All of the z80 configurations in this this directory are set up to build in a
Windows CMD.exe shell. This configuration requires the MinGW host compiler
and severl GNUWin32 tools (see discussion in the top-level NuttX/README.txt
file).
These configurations can be converted to run under Linux (or Cygwin or OSX),
by modifying the configuration file as follows:
-CONFIG_HOST_WINDOWS=y
-CONFIG_WINDOWS_NATIVE=y
+CONFIG_HOST_LINUX=y
-CONFIG_Z80_TOOLCHAIN_SDCCW=y
+CONFIG_Z80_TOOLCHAIN_SDCCL=y
You may need to first manually change the CONFIG_APPS_DIR="..\apps" definition
in the .config file because the backslash may upset some Unix-based tools.
This configuration will require a recent version of SDCC (ca. 3.2.1) for Linux
or custom built for Cygwin (see below).
You cannot use the default setenv.bat in these Unix-like enviroments because
that is a Windows batch file. Use configs/z80sim/script/setenv.sh instead.
setenv.sh must include the path to the installation location of SDCC (probably
/usr/local/bin).
SDCC
^^^^
These z80 configurations all use the SDCC toolchain (http://sdcc.sourceforge.net/).
Source and pre-built SDCC binaries can be downloaded from the SDCC SourceForge
site: http://sourceforge.net/projects/sdcc/files/ . Pre-built binaries are
available for Linux, MAC OSX, and for Win32. Various SDCC options can be
selected with:
CONFIG_Z80_TOOLCHAIN_SDCCL=y : SDCC for Linux, MAC OSX or Cygwin (see below)
CONFIG_Z80_TOOLCHAIN_SDCCW=y : SDCC for Win32
SDCC versions 3.2.0 or higher are recommended.
Building the SDCC toolchain
^^^^^^^^^^^^^^^^^^^^^^^^^^^
You may also want to build your own SDCC toolchain. You might want to do this,
for example, if you are running under Cygwin and want a Cygwin compatible
SDCC toolchain.
The SDCC toolchain is built with the standard configure/make/make install
sequence. However, some special actions are required to generate libraries
compatible with this build. First start with the usual steps
download
unpack
cd sdcc
./configure
Then make the SDCC binaries
cd sdcc
make
and install SDCC:
sudo make install
