sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
98871e58af
nuttx/arch/hc/include/hcs12/irq.h
Alin Jerpelea 3bd4fe62e7 arch: hc: Author Gregory Nutt: update licenses to Apache 
Gregory Nutt has submitted the SGA and we can migrate the licenses
 to Apache.

Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
2021-03-31 21:12:05 -05:00

260 lines
8.0 KiB
C
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

/************************************************************************************
* arch/hc/include/hcs12/irq.h
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership. The
* ASF licenses this file to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance with the
* License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations
* under the License.
*
************************************************************************************/
/* This file should never be included directly but, rather,
* only indirectly through nuttx/irq.h
*/
#ifndef __ARCH_HC_INCLUDE_HCS12_IRQ_H
#define __ARCH_HC_INCLUDE_HCS12_IRQ_H
/************************************************************************************
* Included Files
************************************************************************************/
#include <nuttx/config.h>
#include <nuttx/irq.h>
/************************************************************************************
* Pre-processor Definitions
************************************************************************************/
/* CCR bit definitions */
#define HCS12_CCR_C (1 << 0) /* Bit 0: Carry/Borrow status bit */
#define HCS12_CCR_V (1 << 1) /* Bit 1: Two’s complement overflow status bit */
#define HCS12_CCR_Z (1 << 2) /* Bit 2: Zero status bit */
#define HCS12_CCR_N (1 << 3) /* Bit 3: Negative status bit */
#define HCS12_CCR_I (1 << 4) /* Bit 4: Maskable interrupt control bit */
#define HCS12_CCR_H (1 << 5) /* Bit 5: Half-carry status bit */
#define HCS12_CCR_X (1 << 6) /* Bit 6: Non-maskable interrupt control bit */
#define HCS12_CCR_S (1 << 7) /* Bit 7: STOP instruction control bit */
/************************************************************************************
* Register state save strucure
* Low Address <-- SP after state save
* [PPAGE]
* [soft regisers]
* XYH
* XYL
* ZH
* ZL
* TMPH
* TMPL
* FRAMEH
* FRAMEL
* SP <-- SP after interrupt
* CCR
* B
* A
* XH
* XL
* YH
* YL
* PCH
* High Address PCL <-- SP before interrupt
*
************************************************************************************/
/* Byte offsets */
/* PPAGE register (only in banked mode) */
#ifndef CONFIG_HCS12_NONBANKED
# define REG_PPAGE 0
# define REG_FIRST_SOFTREG 1
#else
# define REG_FIRST_SOFTREG 0
#endif
/* Soft registers (as configured) */
#if CONFIG_HCS12_MSOFTREGS > 2
# error "Need to save more registers"
#elif CONFIG_HCS12_MSOFTREGS == 2
# define REG_SOFTREG1 REG_FIRST_SOFTREG
# define REG_SOFTREG2 (REG_FIRST_SOFTREG+2)
# define REG_FIRST_HARDREG (REG_FIRST_SOFTREG+4)
#elif CONFIG_HCS12_MSOFTREGS == 1
# define REG_SOFTREG1 REG_FIRST_SOFTREG
# define REG_FIRST_HARDREG (REG_FIRST_SOFTREG+2)
#else
# define REG_FIRST_HARDREG REG_FIRST_SOFTREG
#endif
#define REG_XY REG_FIRST_HARDREG
#define REG_Z (REG_FIRST_HARDREG+2)
# define REG_ZH (REG_FIRST_HARDREG+2)
# define REG_ZL (REG_FIRST_HARDREG+3)
#define REG_TMP (REG_FIRST_HARDREG+4)
# define REG_TMPH (REG_FIRST_HARDREG+4)
# define REG_TMPL (REG_FIRST_HARDREG+5)
#define REG_FRAME (REG_FIRST_HARDREG+6)
# define REG_FRAMEH (REG_FIRST_HARDREG+6)
# define REG_FRAMEL (REG_FIRST_HARDREG+7)
/* Stack pointer before the interrupt */
#define REG_SP (REG_FIRST_HARDREG+8)
# define REG_SPH (REG_FIRST_HARDREG+8)
# define REG_SPL (REG_FIRST_HARDREG+9)
/* On entry into an I- or X-interrupt, into an SWI, or into an undefined instruction
* interrupt, the stack frame created by hardware looks like:
*
* Low Address <-- SP after interrupt
* CCR
* B
* A
* XH
* XL
* YH
* YL
* PCH
* High Address PCL <-- SP before interrupt
*/
#define REG_CCR (REG_FIRST_HARDREG+10)
#define REG_BA (REG_FIRST_HARDREG+11)
# define REG_B (REG_FIRST_HARDREG+11)
# define REG_A (REG_FIRST_HARDREG+12)
#define REG_X (REG_FIRST_HARDREG+13)
# define REG_XH (REG_FIRST_HARDREG+13)
# define REG_XL (REG_FIRST_HARDREG+14)
#define REG_Y (REG_FIRST_HARDREG+15)
# define REG_YH (REG_FIRST_HARDREG+15)
# define REG_YL (REG_FIRST_HARDREG+16)
#define REG_PC (REG_FIRST_HARDREG+17)
# define REG_PCH (REG_FIRST_HARDREG+17)
# define REG_PCL (REG_FIRST_HARDREG+18)
#define TOTALFRAME_SIZE (REG_FIRST_HARDREG+17)
#define INTFRAME_SIZE 9
#define XCPTCONTEXT_REGS TOTALFRAME_SIZE
/************************************************************************************
* Public Types
************************************************************************************/
/* This structure defines the way the registers are stored. */
#ifndef __ASSEMBLY__
struct xcptcontext
{
uint8_t regs[XCPTCONTEXT_REGS];
};
/************************************************************************************
* Inline functions
************************************************************************************/
/* Name: up_irq_save, up_irq_restore, and friends.
*
* NOTE: This function should never be called from application code and,
* as a general rule unless you really know what you are doing, this
* function should not be called directly from operation system code either:
* Typically, the wrapper functions, enter_critical_section() and
* leave_critical section(), are probably what you really want.
*/
/* Enable/Disable interrupts */
#define ienable() __asm("cli");
#define idisable() __asm("orcc #0x10")
#define xenable() __asm("andcc #0xbf")
#define xdisable() __asm("orcc #0x40")
/* Get the current value of the CCR */
static inline irqstate_t up_getccr(void)
{
irqstate_t ccr;
__asm__
(
"\ttpa\n"
"\tstaa %0\n"
: "=m"(ccr) :
);
return ccr;
}
/* Save the current interrupt enable state & disable IRQs */
static inline irqstate_t up_irq_save(void)
{
irqstate_t ccr;
__asm__
(
"\ttpa\n"
"\tstaa %0\n"
"\torcc #0x50\n"
: "=m"(ccr) :
);
return ccr;
}
/* Restore saved interrupt state */
static inline void up_irq_restore(irqstate_t flags)
{
/* Should interrupts be enabled? */
if ((flags & HCS12_CCR_I) == 0)
{
/* Yes.. unmask I- and Z-interrupts */
__asm("andcc #0xaf");
}
}
/* System call */
static inline void system_call3(unsigned int nbr, uintptr_t parm1,
uintptr_t parm2, uintptr_t parm3)
{
/* To be provided */
/* __asm("swi") */
}
/************************************************************************************
* Public Data
************************************************************************************/
#ifdef __cplusplus
#define EXTERN extern "C"
extern "C"
{
#else
#define EXTERN extern
#endif
/************************************************************************************
* Public Functions Prototypes
************************************************************************************/
#undef EXTERN
#ifdef __cplusplus
}
#endif
#endif /* __ASSEMBLY__ */
#endif /* __ARCH_HC_INCLUDE_HCS12_IRQ_H */
Reference in New Issue View Git Blame Copy Permalink