nuttx

History

patacongo 0e1b8b8b11 Add TCP readahead logic git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@387 42af7a65-404d-4744-a932-0658087f49c3		2007-11-19 23:09:39 +00:00
..
include	Initial Revision	2007-03-26 16:51:05 +00:00
src	Move PJRC led support into board-specific logic	2007-03-27 16:19:51 +00:00
defconfig	Add TCP readahead logic	2007-11-19 23:09:39 +00:00
Make.defs	in progress update	2007-10-31 23:27:55 +00:00
README.txt	Initial Release	2007-03-23 02:24:38 +00:00
sdcc-2.6.0.patch	Initial Release	2007-03-23 02:24:38 +00:00
setenv.sh	Initial Release	2007-03-23 02:24:38 +00:00

README.txt

pjrc-8051 README
^^^^^^^^^^^^^^^^

This port uses the PJRC 87C52 development system and the SDCC toolchain.

The PJRC 87C52 development system can be obtained from http://www.pjrc.com/.

The SDCC toolchain is available from http://sdcc.sourceforge.net/.  All
testing has been performed using verison 2.6.0 of the SDDC toolchain.

Building the SDCC toolchain
^^^^^^^^^^^^^^^^^^^^^^^^^^^

The SDCC toolchain is built with the standard configure/make/make install
sequence.  However, some special actions are required to generate libraries
compatible with this build.  First start with the usual steps

  download
  unpack
  cd sdcc
  ./configure
  make

But before installing, we need to apply a patch to the SDCC 2.6.0 source.
WARNING:  This patch is specific to the particular combination of CFLAGS
that are used in the compilation.  If you change Make.defs, then you will
likely have to change the patch as well.

  Apply sdcc-2.6.0.patch
  cd sdcc/device/lib
  make model-mcs51-stack-auto

Then

  cd sdcc
  make install