sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
9ac3e841da
nuttx/arch/mips/src/pic32mx/pic32mx_config.h
Xiang Xiao 44bd3212d4 arch: Remove SYS_RESERVED from Kconfg 
let's arch define the correct value instead

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-02-27 22:54:13 +08:00

896 lines
29 KiB
C
Raw Blame History

/************************************************************************************
* arch/mips/src/pic32mx/pic32mx_config.h
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership. The
* ASF licenses this file to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance with the
* License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations
* under the License.
*
************************************************************************************/
#ifndef __ARCH_MIPS_SRC_PIC32MX_PIC32MX_CONFIG_H
#define __ARCH_MIPS_SRC_PIC32MX_PIC32MX_CONFIG_H
/************************************************************************************
* Included Files
************************************************************************************/
#include <nuttx/config.h>
#include <arch/board/board.h>
#include "chip.h"
#include "pic32mx_memorymap.h"
#include "pic32mx_uart.h"
#include "pic32mx_int.h"
#include "pic32mx_devcfg.h"
/************************************************************************************
* Pre-processor Definitions
************************************************************************************/
/* Interrupt Priorities *************************************************************/
#ifndef CONFIG_PIC32MX_CTPRIO /* Core Timer Interrupt */
# define CONFIG_PIC32MX_CTPRIO (INT_IPC_MID_PRIORITY << 2)
#endif
#if CONFIG_PIC32MX_CTPRIO < 4
# error "CONFIG_PIC32MX_CTPRIO is too small"
#endif
#if CONFIG_PIC32MX_CTPRIO > 31
# error "CONFIG_PIC32MX_CTPRIO is too large"
#endif
#ifndef CONFIG_PIC32MX_CS0PRIO /* Core Software Interrupt 0 */
# define CONFIG_PIC32MX_CS0PRIO (INT_IPC_MID_PRIORITY << 2)
#endif
#if CONFIG_PIC32MX_CS0PRIO < 4
# error "CONFIG_PIC32MX_CS0PRIO is too small"
#endif
#if CONFIG_PIC32MX_CS0PRIO > 31
# error "CONFIG_PIC32MX_CS0PRIO is too large"
#endif
#ifndef CONFIG_PIC32MX_CS1PRIO /* Core Software Interrupt 1 */
# define CONFIG_PIC32MX_CS1PRIO (INT_IPC_MID_PRIORITY << 2)
#endif
#if CONFIG_PIC32MX_CS1PRIO < 4
# error "CONFIG_PIC32MX_CS1PRIO is too small"
#endif
#if CONFIG_PIC32MX_CS1PRIO > 31
# error "CONFIG_PIC32MX_CS1PRIO is too large"
#endif
#ifndef CONFIG_PIC32MX_INT0PRIO /* External interrupt 0 */
# define CONFIG_PIC32MX_INT0PRIO (INT_IPC_MID_PRIORITY << 2)
#endif
#if CONFIG_PIC32MX_INT0PRIO < 4
# error "CONFIG_PIC32MX_INT0PRIO is too small"
#endif
#if CONFIG_PIC32MX_INT0PRIO > 31
# error "CONFIG_PIC32MX_INT0PRIO is too large"
#endif
#ifndef CONFIG_PIC32MX_INT1PRIO /* External interrupt 1 */
# define CONFIG_PIC32MX_INT1PRIO (INT_IPC_MID_PRIORITY << 2)
#endif
#if CONFIG_PIC32MX_INT1PRIO < 4
# error "CONFIG_PIC32MX_INT1PRIO is too small"
#endif
#if CONFIG_PIC32MX_INT1PRIO > 31
# error "CONFIG_PIC32MX_INT1PRIO is too large"
#endif
#ifndef CONFIG_PIC32MX_INT2PRIO /* External interrupt 2 */
# define CONFIG_PIC32MX_INT2PRIO (INT_IPC_MID_PRIORITY << 2)
#endif
#if CONFIG_PIC32MX_INT2PRIO < 4
# error "CONFIG_PIC32MX_INT2PRIO is too small"
#endif
#if CONFIG_PIC32MX_INT2PRIO > 31
# error "CONFIG_PIC32MX_INT2PRIO is too large"
#endif
#ifndef CONFIG_PIC32MX_INT3PRIO /* External interrupt 3 */
# define CONFIG_PIC32MX_INT3PRIO (INT_IPC_MID_PRIORITY << 2)
#endif
#if CONFIG_PIC32MX_INT3PRIO < 4
# error "CONFIG_PIC32MX_INT3PRIO is too small"
#endif
#if CONFIG_PIC32MX_INT3PRIO > 31
# error "CONFIG_PIC32MX_INT3PRIO is too large"
#endif
#ifndef CONFIG_PIC32MX_INT4PRIO /* External interrupt 4 */
# define CONFIG_PIC32MX_INT4PRIO (INT_IPC_MID_PRIORITY << 2)
#endif
#if CONFIG_PIC32MX_INT4PRIO < 4
# error "CONFIG_PIC32MX_INT4PRIO is too small"
#endif
#if CONFIG_PIC32MX_INT4PRIO > 31
# error "CONFIG_PIC32MX_INT4PRIO is too large"
#endif
#ifndef CONFIG_PIC32MX_FSCMPRIO /* Fail-Safe Clock Monitor */
# define CONFIG_PIC32MX_FSCMPRIO (INT_IPC_MID_PRIORITY << 2)
#endif
#if CONFIG_PIC32MX_FSCMPRIO < 4
# error "CONFIG_PIC32MX_FSCMPRIO is too small"
#endif
#if CONFIG_PIC32MX_FSCMPRIO > 31
# error "CONFIG_PIC32MX_FSCMPRIO is too large"
#endif
#ifndef CONFIG_PIC32MX_T1PRIO /* Timer 1 (System timer) priority */
# define CONFIG_PIC32MX_T1PRIO (INT_IPC_MID_PRIORITY << 2)
#endif
#if CONFIG_PIC32MX_T1PRIO < 4
# error "CONFIG_PIC32MX_T1PRIO is too small"
#endif
#if CONFIG_PIC32MX_T1PRIO > 31
# error "CONFIG_PIC32MX_T1PRIO is too large"
#endif
#ifndef CONFIG_PIC32MX_T2PRIO /* Timer 2 priority */
# define CONFIG_PIC32MX_T2PRIO (INT_IPC_MID_PRIORITY << 2)
#endif
#if CONFIG_PIC32MX_T2PRIO < 4
# error "CONFIG_PIC32MX_T2PRIO is too small"
#endif
#if CONFIG_PIC32MX_T2PRIO > 31
# error "CONFIG_PIC32MX_T2PRIO is too large"
#endif
#ifndef CONFIG_PIC32MX_T3PRIO /* Timer 3 priority */
# define CONFIG_PIC32MX_T3PRIO (INT_IPC_MID_PRIORITY << 2)
#endif
#if CONFIG_PIC32MX_T3PRIO < 4
# error "CONFIG_PIC32MX_T3PRIO is too small"
#endif
#if CONFIG_PIC32MX_T3PRIO > 31
# error "CONFIG_PIC32MX_T3PRIO is too large"
#endif
#ifndef CONFIG_PIC32MX_T4PRIO /* Timer 4 priority */
# define CONFIG_PIC32MX_T4PRIO (INT_IPC_MID_PRIORITY << 2)
#endif
#if CONFIG_PIC32MX_T4PRIO < 4
# error "CONFIG_PIC32MX_T4PRIO is too small"
#endif
#if CONFIG_PIC32MX_T4PRIO > 31
# error "CONFIG_PIC32MX_T4PRIO is too large"
#endif
#ifndef CONFIG_PIC32MX_T5PRIO /* Timer 5 priority */
# define CONFIG_PIC32MX_T5PRIO (INT_IPC_MID_PRIORITY << 2)
#endif
#if CONFIG_PIC32MX_T5PRIO < 4
# error "CONFIG_PIC32MX_T5PRIO is too small"
#endif
#if CONFIG_PIC32MX_T5PRIO > 31
# error "CONFIG_PIC32MX_T5PRIO is too large"
#endif
#ifndef CONFIG_PIC32MX_IC1PRIO /* Input Capture 1 */
# define CONFIG_PIC32MX_IC1PRIO (INT_IPC_MID_PRIORITY << 2)
#endif
#if CONFIG_PIC32MX_IC1PRIO < 4
# error "CONFIG_PIC32MX_IC1PRIO is too small"
#endif
#if CONFIG_PIC32MX_IC1PRIO > 31
# error "CONFIG_PIC32MX_IC1PRIO is too large"
#endif
#ifndef CONFIG_PIC32MX_IC2PRIO /* Input Capture 2 */
# define CONFIG_PIC32MX_IC2PRIO (INT_IPC_MID_PRIORITY << 2)
#endif
#if CONFIG_PIC32MX_IC2PRIO < 4
# error "CONFIG_PIC32MX_IC2PRIO is too small"
#endif
#if CONFIG_PIC32MX_IC2PRIO > 31
# error "CONFIG_PIC32MX_IC2PRIO is too large"
#endif
#ifndef CONFIG_PIC32MX_IC3PRIO /* Input Capture 3 */
# define CONFIG_PIC32MX_IC3PRIO (INT_IPC_MID_PRIORITY << 2)
#endif
#if CONFIG_PIC32MX_IC3PRIO < 4
# error "CONFIG_PIC32MX_IC3PRIO is too small"
#endif
#if CONFIG_PIC32MX_IC3PRIO > 31
# error "CONFIG_PIC32MX_IC3PRIO is too large"
#endif
#ifndef CONFIG_PIC32MX_IC4PRIO /* Input Capture 4 */
# define CONFIG_PIC32MX_IC4PRIO (INT_IPC_MID_PRIORITY << 2)
#endif
#if CONFIG_PIC32MX_IC4PRIO < 4
# error "CONFIG_PIC32MX_IC4PRIO is too small"
#endif
#if CONFIG_PIC32MX_IC4PRIO > 31
# error "CONFIG_PIC32MX_IC4PRIO is too large"
#endif
#ifndef CONFIG_PIC32MX_IC5PRIO /* Input Capture 5 */
# define CONFIG_PIC32MX_IC5PRIO (INT_IPC_MID_PRIORITY << 2)
#endif
#if CONFIG_PIC32MX_IC5PRIO < 4
# error "CONFIG_PIC32MX_IC5PRIO is too small"
#endif
#if CONFIG_PIC32MX_IC5PRIO > 31
# error "CONFIG_PIC32MX_IC5PRIO is too large"
#endif
#ifndef CONFIG_PIC32MX_OC1PRIO /* Output Compare 1 */
# define CONFIG_PIC32MX_OC1PRIO (INT_IPC_MID_PRIORITY << 2)
#endif
#if CONFIG_PIC32MX_OC1PRIO < 4
# error "CONFIG_PIC32MX_OC1PRIO is too small"
#endif
#if CONFIG_PIC32MX_OC1PRIO > 31
# error "CONFIG_PIC32MX_OC1PRIO is too large"
#endif
#ifndef CONFIG_PIC32MX_OC2PRIO /* Output Compare 2 */
# define CONFIG_PIC32MX_OC2PRIO (INT_IPC_MID_PRIORITY << 2)
#endif
#if CONFIG_PIC32MX_OC2PRIO < 4
# error "CONFIG_PIC32MX_OC2PRIO is too small"
#endif
#if CONFIG_PIC32MX_OC2PRIO > 31
# error "CONFIG_PIC32MX_OC2PRIO is too large"
#endif
#ifndef CONFIG_PIC32MX_OC3PRIO /* Output Compare 3 */
# define CONFIG_PIC32MX_OC3PRIO (INT_IPC_MID_PRIORITY << 2)
#endif
#if CONFIG_PIC32MX_OC3PRIO < 4
# error "CONFIG_PIC32MX_OC3PRIO is too small"
#endif
#if CONFIG_PIC32MX_OC3PRIO > 31
# error "CONFIG_PIC32MX_OC3PRIO is too large"
#endif
#ifndef CONFIG_PIC32MX_OC4PRIO /* Output Compare 4 */
# define CONFIG_PIC32MX_OC4PRIO (INT_IPC_MID_PRIORITY << 2)
#endif
#if CONFIG_PIC32MX_OC4PRIO < 4
# error "CONFIG_PIC32MX_OC4PRIO is too small"
#endif
#if CONFIG_PIC32MX_OC4PRIO > 31
# error "CONFIG_PIC32MX_OC4PRIO is too large"
#endif
#ifndef CONFIG_PIC32MX_OC5PRIO /* Output Compare 5 */
# define CONFIG_PIC32MX_OC5PRIO (INT_IPC_MID_PRIORITY << 2)
#endif
#if CONFIG_PIC32MX_OC5PRIO < 4
# error "CONFIG_PIC32MX_OC5PRIO is too small"
#endif
#if CONFIG_PIC32MX_OC5PRIO > 31
# error "CONFIG_PIC32MX_OC5PRIO is too large"
#endif
#ifndef CONFIG_PIC32MX_I2C1PRIO /* I2C 1 */
# define CONFIG_PIC32MX_I2C1PRIO (INT_IPC_MID_PRIORITY << 2)
#endif
#if CONFIG_PIC32MX_I2C1PRIO < 4
# error "CONFIG_PIC32MX_I2C1PRIO is too small"
#endif
#if CONFIG_PIC32MX_I2C1PRIO > 31
# error "CONFIG_PIC32MX_I2C1PRIO is too large"
#endif
#ifndef CONFIG_PIC32MX_I2C2PRIO /* I2C 2 */
# define CONFIG_PIC32MX_I2C2PRIO (INT_IPC_MID_PRIORITY << 2)
#endif
#if CONFIG_PIC32MX_I2C2PRIO < 4
# error "CONFIG_PIC32MX_I2C2PRIO is too small"
#endif
#if CONFIG_PIC32MX_I2C2PRIO > 31
# error "CONFIG_PIC32MX_I2C2PRIO is too large"
#endif
#ifndef CONFIG_PIC32MX_SPI1PRIO /* SPI 1 */
# define CONFIG_PIC32MX_SPI1PRIO (INT_IPC_MID_PRIORITY << 2)
#endif
#if CONFIG_PIC32MX_SPI1PRIO < 4
# error "CONFIG_PIC32MX_SPI1PRIO is too small"
#endif
#if CONFIG_PIC32MX_SPI1PRIO > 31
# error "CONFIG_PIC32MX_SPI1PRIO is too large"
#endif
#ifndef CONFIG_PIC32MX_SPI2PRIO /* SPI 2 */
# define CONFIG_PIC32MX_SPI2PRIO (INT_IPC_MID_PRIORITY << 2)
#endif
#if CONFIG_PIC32MX_SPI2PRIO < 4
# error "CONFIG_PIC32MX_SPI2PRIO is too small"
#endif
#if CONFIG_PIC32MX_SPI2PRIO > 31
# error "CONFIG_PIC32MX_SPI2PRIO is too large"
#endif
#ifndef CONFIG_PIC32MX_UART1PRIO /* UART 1 */
# define CONFIG_PIC32MX_UART1PRIO (INT_IPC_MID_PRIORITY << 2)
#endif
#if CONFIG_PIC32MX_UART1PRIO < 4
# error "CONFIG_PIC32MX_UART1PRIO is too small"
#endif
#if CONFIG_PIC32MX_UART1PRIO > 31
# error "CONFIG_PIC32MX_UART1PRIO is too large"
#endif
#ifndef CONFIG_PIC32MX_UART2PRIO /* UART 2 */
# define CONFIG_PIC32MX_UART2PRIO (INT_IPC_MID_PRIORITY << 2)
#endif
#if CONFIG_PIC32MX_UART2PRIO < 4
# error "CONFIG_PIC32MX_UART2PRIO is too small"
#endif
#if CONFIG_PIC32MX_UART2PRIO > 31
# error "CONFIG_PIC32MX_UART2PRIO is too large"
#endif
#ifndef CONFIG_PIC32MX_CNPRIO /* Input Change Interrupt */
# define CONFIG_PIC32MX_CNPRIO (INT_IPC_MID_PRIORITY << 2)
#endif
#if CONFIG_PIC32MX_CNPRIO < 4
# error "CONFIG_PIC32MX_CNPRIO is too small"
#endif
#if CONFIG_PIC32MX_CNPRIO > 31
# error "CONFIG_PIC32MX_CNPRIO is too large"
#endif
#ifndef CONFIG_PIC32MX_ADCPRIO /* ADC1 Convert Done */
# define CONFIG_PIC32MX_ADCPRIO (INT_IPC_MID_PRIORITY << 2)
#endif
#if CONFIG_PIC32MX_ADCPRIO < 4
# error "CONFIG_PIC32MX_ADCPRIO is too small"
#endif
#if CONFIG_PIC32MX_ADCPRIO > 31
# error "CONFIG_PIC32MX_ADCPRIO is too large"
#endif
#ifndef CONFIG_PIC32MX_PMPPRIO /* Parallel Master Port */
# define CONFIG_PIC32MX_PMPPRIO (INT_IPC_MID_PRIORITY << 2)
#endif
#if CONFIG_PIC32MX_PMPPRIO < 4
# error "CONFIG_PIC32MX_PMPPRIO is too small"
#endif
#if CONFIG_PIC32MX_PMPPRIO > 31
# error "CONFIG_PIC32MX_PMPPRIO is too large"
#endif
#ifndef CONFIG_PIC32MX_CM1PRIO /* Comparator 1 */
# define CONFIG_PIC32MX_CM1PRIO (INT_IPC_MID_PRIORITY << 2)
#endif
#if CONFIG_PIC32MX_CM1PRIO < 4
# error "CONFIG_PIC32MX_CM1PRIO is too small"
#endif
#if CONFIG_PIC32MX_CM1PRIO > 31
# error "CONFIG_PIC32MX_CM1PRIO is too large"
#endif
#ifndef CONFIG_PIC32MX_CM2PRIO /* Comparator 2 */
# define CONFIG_PIC32MX_CM2PRIO (INT_IPC_MID_PRIORITY << 2)
#endif
#if CONFIG_PIC32MX_CM2PRIO < 4
# error "CONFIG_PIC32MX_CM2PRIO is too small"
#endif
#if CONFIG_PIC32MX_CM2PRIO > 31
# error "CONFIG_PIC32MX_CM2PRIO is too large"
#endif
#ifndef CONFIG_PIC32MX_FSCMPRIO /* Fail-Safe Clock Monitor */
# define CONFIG_PIC32MX_FSCMPRIO (INT_IPC_MID_PRIORITY << 2)
#endif
#if CONFIG_PIC32MX_FSCMPRIO < 4
# error "CONFIG_PIC32MX_FSCMPRIO is too small"
#endif
#if CONFIG_PIC32MX_FSCMPRIO > 31
# error "CONFIG_PIC32MX_FSCMPRIO is too large"
#endif
#ifndef CONFIG_PIC32MX_RTCCPRIO /* Real-Time Clock and Calendar */
# define CONFIG_PIC32MX_RTCCPRIO (INT_IPC_MID_PRIORITY << 2)
#endif
#if CONFIG_PIC32MX_RTCCPRIO < 4
# error "CONFIG_PIC32MX_RTCCPRIO is too small"
#endif
#if CONFIG_PIC32MX_RTCCPRIO > 31
# error "CONFIG_PIC32MX_RTCCPRIO is too large"
#endif
#ifndef CONFIG_PIC32MX_DMA0PRIO /* DMA Channel 0 */
# define CONFIG_PIC32MX_DMA0PRIO (INT_IPC_MID_PRIORITY << 2)
#endif
#if CONFIG_PIC32MX_DMA0PRIO < 4
# error "CONFIG_PIC32MX_DMA0PRIO is too small"
#endif
#if CONFIG_PIC32MX_DMA0PRIO > 31
# error "CONFIG_PIC32MX_DMA0PRIO is too large"
#endif
#ifndef CONFIG_PIC32MX_DMA1PRIO /* DMA Channel 1 */
# define CONFIG_PIC32MX_DMA1PRIO (INT_IPC_MID_PRIORITY << 2)
#endif
#if CONFIG_PIC32MX_DMA1PRIO < 4
# error "CONFIG_PIC32MX_DMA1PRIO is too small"
#endif
#if CONFIG_PIC32MX_DMA1PRIO > 31
# error "CONFIG_PIC32MX_DMA1PRIO is too large"
#endif
#ifndef CONFIG_PIC32MX_DMA2PRIO /* DMA Channel 2 */
# define CONFIG_PIC32MX_DMA2PRIO (INT_IPC_MID_PRIORITY << 2)
#endif
#if CONFIG_PIC32MX_DMA2PRIO < 4
# error "CONFIG_PIC32MX_DMA2PRIO is too small"
#endif
#if CONFIG_PIC32MX_DMA2PRIO > 31
# error "CONFIG_PIC32MX_DMA2PRIO is too large"
#endif
#ifndef CONFIG_PIC32MX_DMA3PRIO /* DMA Channel 3 */
# define CONFIG_PIC32MX_DMA3PRIO (INT_IPC_MID_PRIORITY << 2)
#endif
#if CONFIG_PIC32MX_DMA3PRIO < 4
# error "CONFIG_PIC32MX_DMA3PRIO is too small"
#endif
#if CONFIG_PIC32MX_DMA3PRIO > 31
# error "CONFIG_PIC32MX_DMA3PRIO is too large"
#endif
#ifndef CONFIG_PIC32MX_FCEPRIO /* Flash Control Event */
# define CONFIG_PIC32MX_FCEPRIO (INT_IPC_MID_PRIORITY << 2)
#endif
#if CONFIG_PIC32MX_FCEPRIO < 4
# error "CONFIG_PIC32MX_FCEPRIO is too small"
#endif
#if CONFIG_PIC32MX_FCEPRIO > 31
# error "CONFIG_PIC32MX_FCEPRIO is too large"
#endif
#ifndef CONFIG_PIC32MX_USBPRIO /* USB */
# define CONFIG_PIC32MX_USBPRIO (INT_IPC_MID_PRIORITY << 2)
#endif
#if CONFIG_PIC32MX_USBPRIO < 4
# error "CONFIG_PIC32MX_USBPRIO is too small"
#endif
#if CONFIG_PIC32MX_USBPRIO > 31
# error "CONFIG_PIC32MX_USBPRIO is too large"
#endif
/* UARTs ****************************************************************************/
/* Don't enable UARTs not supported by the chip. */
#if CHIP_NUARTS < 1
# undef CONFIG_PIC32MX_UART1
# undef CONFIG_PIC32MX_UART2
# undef CONFIG_PIC32MX_UART3
# undef CONFIG_PIC32MX_UART4
# undef CONFIG_PIC32MX_UART5
# undef CONFIG_PIC32MX_UART6
#elif CHIP_NUARTS < 2
# undef CONFIG_PIC32MX_UART2
# undef CONFIG_PIC32MX_UART3
# undef CONFIG_PIC32MX_UART4
# undef CONFIG_PIC32MX_UART5
# undef CONFIG_PIC32MX_UART6
#elif CHIP_NUARTS < 3
# undef CONFIG_PIC32MX_UART3
# undef CONFIG_PIC32MX_UART4
# undef CONFIG_PIC32MX_UART5
# undef CONFIG_PIC32MX_UART6
#elif CHIP_NUARTS < 4
# undef CONFIG_PIC32MX_UART4
# undef CONFIG_PIC32MX_UART5
# undef CONFIG_PIC32MX_UART6
#elif CHIP_NUARTS < 5
# undef CONFIG_PIC32MX_UART5
# undef CONFIG_PIC32MX_UART6
#elif CHIP_NUARTS < 6
# undef CONFIG_PIC32MX_UART6
#endif
/* Are any UARTs enabled? */
#undef HAVE_UART_DEVICE
#if defined(CONFIG_PIC32MX_UART1) || defined(CONFIG_PIC32MX_UART2) || \
defined(CONFIG_PIC32MX_UART4) || defined(CONFIG_PIC32MX_UART4) || \
defined(CONFIG_PIC32MX_UART5) || defined(CONFIG_PIC32MX_UART6)
# define HAVE_UART_DEVICE 1
#endif
/* Is there a serial console? There should be no more than one defined. It
* could be on any UARTn, n=1,.. CHIP_NUARTS
*/
#if defined(CONFIG_UART1_SERIAL_CONSOLE) && defined(CONFIG_PIC32MX_UART1)
# undef CONFIG_UART2_SERIAL_CONSOLE
# undef CONFIG_UART3_SERIAL_CONSOLE
# undef CONFIG_UART4_SERIAL_CONSOLE
# undef CONFIG_UART5_SERIAL_CONSOLE
# undef CONFIG_UART6_SERIAL_CONSOLE
# define HAVE_SERIAL_CONSOLE 1
#elif defined(CONFIG_UART2_SERIAL_CONSOLE) && defined(CONFIG_PIC32MX_UART2)
# undef CONFIG_UART1_SERIAL_CONSOLE
# undef CONFIG_UART3_SERIAL_CONSOLE
# undef CONFIG_UART4_SERIAL_CONSOLE
# undef CONFIG_UART5_SERIAL_CONSOLE
# undef CONFIG_UART6_SERIAL_CONSOLE
# define HAVE_SERIAL_CONSOLE 1
#elif defined(CONFIG_UART3_SERIAL_CONSOLE) && defined(CONFIG_PIC32MX_UART3)
# undef CONFIG_UART1_SERIAL_CONSOLE
# undef CONFIG_UART2_SERIAL_CONSOLE
# undef CONFIG_UART4_SERIAL_CONSOLE
# undef CONFIG_UART5_SERIAL_CONSOLE
# undef CONFIG_UART6_SERIAL_CONSOLE
# define HAVE_SERIAL_CONSOLE 1
#elif defined(CONFIG_UART4_SERIAL_CONSOLE) && defined(CONFIG_PIC32MX_UART4)
# undef CONFIG_UART1_SERIAL_CONSOLE
# undef CONFIG_UART2_SERIAL_CONSOLE
# undef CONFIG_UART3_SERIAL_CONSOLE
# undef CONFIG_UART5_SERIAL_CONSOLE
# undef CONFIG_UART6_SERIAL_CONSOLE
# define HAVE_SERIAL_CONSOLE 1
#elif defined(CONFIG_UART5_SERIAL_CONSOLE) && defined(CONFIG_PIC32MX_UART5)
# undef CONFIG_UART1_SERIAL_CONSOLE
# undef CONFIG_UART2_SERIAL_CONSOLE
# undef CONFIG_UART3_SERIAL_CONSOLE
# undef CONFIG_UART4_SERIAL_CONSOLE
# undef CONFIG_UART6_SERIAL_CONSOLE
# define HAVE_SERIAL_CONSOLE 1
#elif defined(CONFIG_UART6_SERIAL_CONSOLE) && defined(CONFIG_PIC32MX_UART6)
# undef CONFIG_UART1_SERIAL_CONSOLE
# undef CONFIG_UART2_SERIAL_CONSOLE
# undef CONFIG_UART3_SERIAL_CONSOLE
# undef CONFIG_UART4_SERIAL_CONSOLE
# undef CONFIG_UART5_SERIAL_CONSOLE
# define HAVE_SERIAL_CONSOLE 1
#else
# undef CONFIG_UART1_SERIAL_CONSOLE
# undef CONFIG_UART2_SERIAL_CONSOLE
# undef CONFIG_UART3_SERIAL_CONSOLE
# undef CONFIG_UART4_SERIAL_CONSOLE
# undef CONFIG_UART5_SERIAL_CONSOLE
# undef CONFIG_UART6_SERIAL_CONSOLE
# undef HAVE_SERIAL_CONSOLE
#endif
/* Device Configuration *************************************************************/
/* DEVCFG3 */
#ifndef CONFIG_PIC32MX_USERID /* User ID */
# define CONFIG_PIC32MX_USERID 0x584e /* "NX" */
#endif
#ifndef CONFIG_PIC32MX_PMDL1WAY /* Peripheral module disable configuration */
# define CONFIG_PIC32MX_PMDL1WAY 0
#endif
#ifndef CONFIG_PIC32MX_IOL1WAY /* Peripheral pin select configuration */
# define CONFIG_PIC32MX_IOL1WAY 0
#endif
#ifndef CONFIG_PIC32MX_SRSSEL /* Shadow register interrupt priority */
# define CONFIG_PIC32MX_SRSSEL INT_IPC_MIN_PRIORITY
#endif
/* Unless overridden in the .config file, all pins are in the default setting */
#ifndef CONFIG_PIC32MX_FMIIEN /* Ethernet MII enable: 0=RMII 1=MII */
# define CONFIG_PIC32MX_FMIIEN 1 /* MII enabled */
#endif
#ifndef CONFIG_PIC32MX_FETHIO /* Ethernet I/O Pins 0=alternate 1=default */
# define CONFIG_PIC32MX_FETHIO 1 /* Default Ethernet I/O Pins */
#endif
#ifndef CONFIG_PIC32MX_FCANIO /* SCM1 pin C selection */
# define CONFIG_PIC32MX_FCANIO 1 /* Default CAN I/O Pins */
#endif
#ifndef CONFIG_PIC32MX_FSCM1IO /* SCM1 pin C selection */
# define CONFIG_PIC32MX_FSCM1IO 1 /* Default pin for SCM1C */
#endif
/* USB or Ports? */
#ifdef CONFIG_PIC32MX_USB
# ifndef CONFIG_PIC32MX_USBIDO /* USB USBID Selection */
# define CONFIG_PIC32MX_USBIDO 1 /* USBID pin is controlled by the USB module */
# endif
# ifndef CONFIG_PIC32MX_VBUSIO /* USB VBUSON Selection */
# define CONFIG_PIC32MX_VBUSIO 1 /* VBUSON pin is controlled by the USB module */
# endif
#else
# ifndef CONFIG_PIC32MX_USBIDO /* USB USBID Selection */
# define CONFIG_PIC32MX_USBIDO 0 /* USBID pin is controlled by the Port function */
# endif
# ifndef CONFIG_PIC32MX_VBUSIO /* USB VBUSON Selection */
# define CONFIG_PIC32MX_VBUSIO 0 /* VBUSON pin is controlled by the Port function */
# endif
#endif
/* DEVCFG2 */
#undef CONFIG_PIC32MX_PLLIDIV
#if BOARD_PLL_IDIV == 1
# define CONFIG_PIC32MX_PLLIDIV DEVCFG2_FPLLIDIV_DIV1
#elif BOARD_PLL_IDIV == 2
# define CONFIG_PIC32MX_PLLIDIV DEVCFG2_FPLLIDIV_DIV2
#elif BOARD_PLL_IDIV == 3
# define CONFIG_PIC32MX_PLLIDIV DEVCFG2_FPLLIDIV_DIV3
#elif BOARD_PLL_IDIV == 4
# define CONFIG_PIC32MX_PLLIDIV DEVCFG2_FPLLIDIV_DIV4
#elif BOARD_PLL_IDIV == 5
# define CONFIG_PIC32MX_PLLIDIV DEVCFG2_FPLLIDIV_DIV5
#elif BOARD_PLL_IDIV == 6
# define CONFIG_PIC32MX_PLLIDIV DEVCFG2_FPLLIDIV_DIV6
#elif BOARD_PLL_IDIV == 10
# define CONFIG_PIC32MX_PLLIDIV DEVCFG2_FPLLIDIV_DIV10
#elif BOARD_PLL_IDIV == 12
# define CONFIG_PIC32MX_PLLIDIV DEVCFG2_FPLLIDIV_DIV12
#else
# error "Unsupported BOARD_PLL_IDIV"
#endif
#undef CONFIG_PIC32MX_PLLMULT
#if BOARD_PLL_MULT == 15
# define CONFIG_PIC32MX_PLLMULT DEVCFG2_FPLLMULT_MUL15
#elif BOARD_PLL_MULT == 16
# define CONFIG_PIC32MX_PLLMULT DEVCFG2_FPLLMULT_MUL16
#elif BOARD_PLL_MULT == 17
# define CONFIG_PIC32MX_PLLMULT DEVCFG2_FPLLMULT_MUL17
#elif BOARD_PLL_MULT == 18
# define CONFIG_PIC32MX_PLLMULT DEVCFG2_FPLLMULT_MUL18
#elif BOARD_PLL_MULT == 19
# define CONFIG_PIC32MX_PLLMULT DEVCFG2_FPLLMULT_MUL19
#elif BOARD_PLL_MULT == 20
# define CONFIG_PIC32MX_PLLMULT DEVCFG2_FPLLMULT_MUL20
#elif BOARD_PLL_MULT == 21
# define CONFIG_PIC32MX_PLLMULT DEVCFG2_FPLLMULT_MUL21
#elif BOARD_PLL_MULT == 24
# define CONFIG_PIC32MX_PLLMULT DEVCFG2_FPLLMULT_MUL24
#else
# error "Unsupported BOARD_PLL_MULT"
#endif
#undef CONFIG_PIC32MX_UPLLIDIV
#if BOARD_UPLL_IDIV == 1
# define CONFIG_PIC32MX_UPLLIDIV DEVCFG2_FUPLLIDIV_DIV1
#elif BOARD_UPLL_IDIV == 2
# define CONFIG_PIC32MX_UPLLIDIV DEVCFG2_FUPLLIDIV_DIV2
#elif BOARD_UPLL_IDIV == 3
# define CONFIG_PIC32MX_UPLLIDIV DEVCFG2_FUPLLIDIV_DIV3
#elif BOARD_UPLL_IDIV == 4
# define CONFIG_PIC32MX_UPLLIDIV DEVCFG2_FUPLLIDIV_DIV4
#elif BOARD_UPLL_IDIV == 5
# define CONFIG_PIC32MX_UPLLIDIV DEVCFG2_FUPLLIDIV_DIV5
#elif BOARD_UPLL_IDIV == 6
# define CONFIG_PIC32MX_UPLLIDIV DEVCFG2_FUPLLIDIV_DIV6
#elif BOARD_UPLL_IDIV == 10
# define CONFIG_PIC32MX_UPLLIDIV DEVCFG2_FUPLLIDIV_DIV10
#elif BOARD_UPLL_IDIV == 12
# define CONFIG_PIC32MX_UPLLIDIV DEVCFG2_FUPLLIDIV_DIV12
#else
# error "Unsupported BOARD_UPLL_IDIV"
#endif
#ifndef CONFIG_PIC32MX_FUPLLEN
# if defined(CONFIG_PIC32MX_USBDEV) || defined(CONFIG_PIC32MX_USBHOST)
# define CONFIG_PIC32MX_FUPLLEN 0 /* Enable */
# else
# define CONFIG_PIC32MX_FUPLLEN 1 /* Bypass and disable */
# endif
#endif
#undef CONFIG_PIC32MX_PLLODIV
#if BOARD_PLL_ODIV == 1
# define CONFIG_PIC32MX_PLLODIV DEVCFG2_FPLLODIV_DIV1
#elif BOARD_PLL_ODIV == 2
# define CONFIG_PIC32MX_PLLODIV DEVCFG2_FPLLODIV_DIV2
#elif BOARD_PLL_ODIV == 4
# define CONFIG_PIC32MX_PLLODIV DEVCFG2_FPLLODIV_DIV2
#elif BOARD_PLL_ODIV == 8
# define CONFIG_PIC32MX_PLLODIV DEVCFG2_FPLLODIV_DIV2
#elif BOARD_PLL_ODIV == 16
# define CONFIG_PIC32MX_PLLODIV DEVCFG2_FPLLODIV_DIV2
#elif BOARD_PLL_ODIV == 32
# define CONFIG_PIC32MX_PLLODIV DEVCFG2_FPLLODIV_DIV2
#elif BOARD_PLL_ODIV == 64
# define CONFIG_PIC32MX_PLLODIV DEVCFG2_FPLLODIV_DIV2
#elif BOARD_PLL_ODIV == 128
# define CONFIG_PIC32MX_PLLODIV DEVCFG2_FPLLODIV_DIV2
#else
# error "Unsupported BOARD_PLL_ODIV"
#endif
/* DEVCFG1 */
#ifdef BOARD_SOSC_ENABLE
# define CONFIG_PIC32MX_FSOSCEN DEVCFG1_FSOSCEN
#else
# define CONFIG_PIC32MX_FSOSCEN 0
#endif
#ifdef BOARD_SOSC_IESO
# define CONFIG_PIC32MX_IESO DEVCFG1_IESO
#else
# define CONFIG_PIC32MX_IESO 0
#endif
#undef CONFIG_PIC32MX_PBDIV
#if BOARD_PBDIV == 1
# define CONFIG_PIC32MX_PBDIV DEVCFG1_FPBDIV_DIV1
#elif BOARD_PBDIV == 2
# define CONFIG_PIC32MX_PBDIV DEVCFG1_FPBDIV_DIV2
#elif BOARD_PBDIV == 4
# define CONFIG_PIC32MX_PBDIV DEVCFG1_FPBDIV_DIV4
#elif BOARD_PBDIV == 8
# define CONFIG_PIC32MX_PBDIV DEVCFG1_FPBDIV_DIV8
#else
# error "Unsupported BOARD_PBDIV"
#endif
#undef CONFIG_PIC32MX_POSCMOD
#if defined(BOARD_POSC_ECMODE)
# define CONFIG_PIC32MX_POSCMOD DEVCFG1_POSCMOD_EC
#elif defined(BOARD_POSC_XTMODE)
# define CONFIG_PIC32MX_POSCMOD DEVCFG1_POSCMOD_XT
#elif defined(BOARD_POSC_HSMODE)
# define CONFIG_PIC32MX_POSCMOD DEVCFG1_POSCMOD_HS
#elif defined(BOARD_POSC_DISABLED)
# define CONFIG_PIC32MX_POSCMOD DEVCFG1_POSCMOD_DIS
#else
# error "Unknown board POSC mode"
#endif
#undef CONFIG_PIC32MX_FNOSC
#if defined(BOARD_FNOSC_FRC)
# define CONFIG_PIC32MX_FNOSC DEVCFG1_FNOSC_FRC
#elif defined(BOARD_FNOSC_FRCPLL)
# define CONFIG_PIC32MX_FNOSC DEVCFG1_FNOSC_FRCPLL
#elif defined(BOARD_FNOSC_POSC)
# define CONFIG_PIC32MX_FNOSC DEVCFG1_FNOSC_POSC
#elif defined(BOARD_FNOSC_POSCPLL)
# define CONFIG_PIC32MX_FNOSC DEVCFG1_FNOSC_POSCPLL
#elif defined(BOARD_FNOSC_SOSC)
# define CONFIG_PIC32MX_FNOSC DEVCFG1_FNOSC_SOSC
#elif defined(BOARD_FNOSC_LPRC)
# define CONFIG_PIC32MX_FNOSC DEVCFG1_FNOSC_LPRC
#elif defined(BOARD_FNOSC_FRCDIV)
# define CONFIG_PIC32MX_FNOSC DEVCFG1_FNOSC_FRCDIV
#else
# error "Unknown board FNOSC selection"
#endif
#undef CONFIG_PIC32MX_FCKSM
#if defined(BOARD_POSC_SWITCH)
# if defined(BOARD_POSC_FSCM)
# define CONFIG_PIC32MX_FCKSM DEVCFG1_FCKSM_BOTH
# else
# define CONFIG_PIC32MX_FCKSM DEVCFG1_FCKSM_CSONLY
# endif
#else
# define CONFIG_PIC32MX_FCKSM DEVCFG1_FCKSM_NONE
#endif
#ifndef CONFIG_PIC32MX_OSCOUT
# define CONFIG_PIC32MX_OSCOUT 0
#endif
#undef CONFIG_PIC32MX_WDPS
#if BOARD_WD_PRESCALER == 1
# define CONFIG_PIC32MX_WDPS DEVCFG1_WDTPS_1
#elif BOARD_WD_PRESCALER == 2
# define CONFIG_PIC32MX_WDPS DEVCFG1_WDTPS_2
#elif BOARD_WD_PRESCALER == 4
# define CONFIG_PIC32MX_WDPS DEVCFG1_WDTPS_4
#elif BOARD_WD_PRESCALER == 8
# define CONFIG_PIC32MX_WDPS DEVCFG1_WDTPS_8
#elif BOARD_WD_PRESCALER == 16
# define CONFIG_PIC32MX_WDPS DEVCFG1_WDTPS_16
#elif BOARD_WD_PRESCALER == 32
# define CONFIG_PIC32MX_WDPS DEVCFG1_WDTPS_32
#elif BOARD_WD_PRESCALER == 64
# define CONFIG_PIC32MX_WDPS DEVCFG1_WDTPS_64
#elif BOARD_WD_PRESCALER == 128
# define CONFIG_PIC32MX_WDPS DEVCFG1_WDTPS_128
#elif BOARD_WD_PRESCALER == 256
# define CONFIG_PIC32MX_WDPS DEVCFG1_WDTPS_256
#elif BOARD_WD_PRESCALER == 512
# define CONFIG_PIC32MX_WDPS DEVCFG1_WDTPS_512
#elif BOARD_WD_PRESCALER == 1024
# define CONFIG_PIC32MX_WDPS DEVCFG1_WDTPS_1024
#elif BOARD_WD_PRESCALER == 2048
# define CONFIG_PIC32MX_WDPS DEVCFG1_WDTPS_2048
#elif BOARD_WD_PRESCALER == 4096
# define CONFIG_PIC32MX_WDPS DEVCFG1_WDTPS_4096
#elif BOARD_WD_PRESCALER == 8192
# define CONFIG_PIC32MX_WDPS DEVCFG1_WDTPS_8192
#elif BOARD_WD_PRESCALER == 16384
# define CONFIG_PIC32MX_WDPS DEVCFG1_WDTPS_16384
#elif BOARD_WD_PRESCALER == 32768
# define CONFIG_PIC32MX_WDPS DEVCFG1_WDTPS_32768
#elif BOARD_WD_PRESCALER == 65536
# define CONFIG_PIC32MX_WDPS DEVCFG1_WDTPS_65536
#elif BOARD_WD_PRESCALER == 131072
# define CONFIG_PIC32MX_WDPS DEVCFG1_WDTPS_131072
#elif BOARD_WD_PRESCALER == 262144
# define CONFIG_PIC32MX_WDPS DEVCFG1_WDTPS_262144
#elif BOARD_WD_PRESCALER == 524288
# define CONFIG_PIC32MX_WDPS DEVCFG1_WDTPS_524288
#elif BOARD_WD_PRESCALER == 1048576
# define CONFIG_PIC32MX_WDPS DEVCFG1_WDTPS_1048576
#else
# error "Unsupported BOARD_WD_PRESCALER"
#endif
#undef CONFIG_PIC32MX_WDENABLE
#if BOARD_WD_ENABLE
# define CONFIG_PIC32MX_WDENABLE DEVCFG1_FWDTEN
#else
# define CONFIG_PIC32MX_WDENABLE 0
#endif
/* DEVCFG0 */
#ifndef CONFIG_PIC32MX_DEBUGGER /* Background Debugger Enable */
# define CONFIG_PIC32MX_DEBUGGER 3 /* disabled */
#endif
#ifndef CONFIG_PIC32MX_ICESEL /* In-Circuit Emulator/Debugger Communication Channel Select */
# if defined(CHIP_PIC32MX1) || defined(CHIP_PIC32MX2)
# define CONFIG_PIC32MX_ICESEL 3 /* Default PGEC1/PGED1 */
# else
# define CONFIG_PIC32MX_ICESEL 1 /* Default PGEC1/PGED1 */
# endif
#endif
#ifndef CONFIG_PIC32MX_PROGFLASHWP /* Program FLASH write protect */
# if defined(CHIP_PIC32MX1) || defined(CHIP_PIC32MX2)
# define CONFIG_PIC32MX_PROGFLASHWP 0x3ff /* Disabled */
# else
# define CONFIG_PIC32MX_PROGFLASHWP 0xff /* Disabled */
# endif
#endif
#ifndef CONFIG_PIC32MX_BOOTFLASHWP
# define CONFIG_PIC32MX_BOOTFLASHWP 1 /* Disabled */
#endif
#ifndef CONFIG_PIC32MX_CODEWP
# define CONFIG_PIC32MX_CODEWP 1 /* Disabled */
#endif
/************************************************************************************
* Public Types
************************************************************************************/
/************************************************************************************
* Public Data
************************************************************************************/
/************************************************************************************
* Inline Functions
************************************************************************************/
/************************************************************************************
* Public Functions Prototypes
************************************************************************************/
#endif /* __ARCH_MIPS_SRC_PIC32MX_PIC32MX_CONFIG_H */
Reference in New Issue View Git Blame Copy Permalink