..
analog
drivers/analog: Add driver for the LTC1767L ADC.
2017-03-28 06:34:37 -06:00
audio
Fixes for coding standard: '*' needs to 'snuggle' with following variable name
2017-02-28 18:22:57 -06:00
binfmt
Fix a number of header files with mismatched 'extern C {' and '}'
2016-11-05 07:25:05 -06:00
contactless
Fix some comments in header files
2016-08-31 13:34:52 -06:00
crypto
Add entropy pool and strong random number generator
2017-03-30 07:38:37 -06:00
drivers
Wireless and TSC: Add infrastructure to assure that all IOCTL commands are uniquely numbered.
2017-02-25 15:48:25 -06:00
eeprom
Add support for ST Micro EEPROM device geometries. From Sebastien Lorquet
2014-12-05 09:13:34 -06:00
fs
Merge remote-tracking branch 'origin/master' into ieee802154
2017-04-01 09:08:35 -06:00
i2c
Changes from review of PR 114
2016-08-14 13:38:47 -06:00
input
Buttons: Change return value of board_buttons() and the type of btn_buttonset_t to uint32_t so that more than 8 buttons can be supported.
2017-04-09 07:22:49 -06:00
ioexpander
Fix names of pre-processor variables used in header file idempotence
2016-08-06 19:21:42 -06:00
lcd
memlcd: Mark Schulte <mark@mjs.pw>
2017-03-01 08:52:58 -06:00
leds
pwm.h moved from include/nuttx/ to include/nuttx/drivers.
2016-07-20 13:48:24 -06:00
lib
Shared Libs: Implement module based shared libraries for the PROTECTED mode build
2017-01-29 13:03:53 -06:00
mm
Add _ to the beginning of all debug macros to avoid name collisions
2016-06-16 12:33:32 -06:00
modem
include/nuttx/modem: Move all modem-related IOCTL commands to a common file to assure that they will be unique
2016-09-16 09:39:51 -06:00
mtd
MTD: SPI-based driver for Macronix MX25L3233F or MX25L6433F.
2016-09-02 11:00:04 -06:00
net
6loWPAN: Correct ordering of headers. fragmentation header was coming out before FCF.
2017-04-16 12:18:42 -06:00
nx
NX server: Correct message queue names. Should not be at /dev, but rather relative to /var/mqueue.
2017-01-08 09:14:11 -06:00
power
Fix names of pre-processor variables used in header file idempotence
2016-08-06 19:21:42 -06:00
sensors
sensors: lis2dh: fix hardfault when reading from unconfigured sensor
2017-04-04 07:38:49 -06:00
serial
PTY: Add TERMIOS support.
2016-07-16 10:43:44 -06:00
spi
contactless: spi device
2016-08-31 13:22:10 +02:00
syslog
Add a SYSLOG character device that can be used to re-direct output to the SYSLOG
2016-07-05 12:58:18 -06:00
timers
RTC: add interface for check if RTC time has been set
2017-04-06 09:53:11 -06:00
usb
drivers/usbmisc: Add driver for Fairchild FUSB301 USB type-C controller.
2017-03-31 06:35:36 -06:00
video
Fix names of pre-processor variables used in header file idempotence
2016-08-06 19:21:42 -06:00
wireless
wireless/ieee802154: Lots of small fixes to eliminate build issues.
2017-04-18 15:34:28 -04:00
.gitignore
Mostly updates and corrections to .gitignore files
2013-04-04 15:39:50 -06:00
addrenv.h
Move include/nuttx/mm.h to include/nuttx/mm/mm.h
2014-09-24 07:29:09 -06:00
arch.h
Update some comments
2017-03-03 12:48:58 -06:00
ascii.h
ASCII: Improve some naming
2016-04-14 16:20:36 -06:00
board.h
Buttons: Correct some comments left after last button-related change: 32- vs 8-bit bit set.
2017-04-09 14:44:49 -06:00
cancelpt.h
Move cancellation point definitions to their own header file.
2016-12-10 09:08:26 -06:00
clock.h
sched/sched_cpuload_oneshot: Use the oneshot timer with optional entropy to measuer cPU load if so configured.
2016-08-20 12:47:07 -06:00
compiler.h
Add ffsl(), ffsll(), fls(), flsl(), flsll() and use GCC's __builtin_ctz/__builtin_clz for faster implementation of these
2017-03-24 09:41:31 -06:00
init.h
enter/leave_critical_section: In SMP configuration, may attempt to access the task lists before they have been initialized
2016-05-18 09:17:01 -06:00
irq.h
Add missing endif
2017-03-03 14:39:35 -06:00
kmalloc.h
Performance improvement: Idle loop should not take MM semaphore if there is not garbage to be collected. This can cause loss of performance and thrashing in tasking
2016-02-16 19:33:22 -06:00
kthread.h
Add basic data structures that will allow us to move named semaphore support out of the OS and into the VFS (not complete).
2014-09-28 10:15:33 -06:00
mmcsd.h
Add capabilities() method to SDIO interface. Remove CONFIG_SDIO_WIDTH_D1_ONLY. That should not be a global propertie, but rather a capability/limitation of single slot when there may be multiple slots.
2017-01-31 09:16:01 -06:00
module.h
Module names are not needed in libc/modlib when the module library is used only for shared library support.
2017-01-29 12:23:24 -06:00
mqueue.h
Fix an error when a task with open message queue descriptors is killed via task_delete(). Noted by Anton Gropyanov.
2016-04-11 11:14:18 -06:00
page.h
Add basic data structures that will allow us to move named semaphore support out of the OS and into the VFS (not complete).
2014-09-28 10:15:33 -06:00
pgalloc.h
Add basic data structures that will allow us to move named semaphore support out of the OS and into the VFS (not complete).
2014-09-28 10:15:33 -06:00
poff.h
Fix names of pre-processor variables used in header file idempotence
2016-08-06 19:21:42 -06:00
progmem.h
drivers/mtd/mtd_progmem.c: Add an upper-half driver that can be used with any FLASH library that provides the itnerfaces defined in include/nuttx/progmem.h
2015-11-12 13:40:18 -06:00
pthread.h
Move cancellation point definitions to their own header file.
2016-12-10 09:08:26 -06:00
random.h
drivers/sensors: Add driver for ST HTS221 humidity sensor
2017-03-30 12:17:23 -06:00
sched_note.h
Update ChangeLog in prep for 7.20 release.
2017-03-08 10:09:48 -06:00
sched.h
pthreads: Add a configuration option to disable robust mutexes and revert to the traditional unsafe mutexes.
2017-03-26 17:37:28 -06:00
scsi.h
Clean up and review of header files for conformance to standards
2015-06-12 19:26:01 -06:00
sdio.h
MMC/SD SDIO: Some drivers need to start DMA before sending CMD24 and some AFTER
2017-02-09 11:13:05 -06:00
semaphore.h
include/nuttx/semaphore.h: Fix broken macros
2016-11-03 12:49:44 -06:00
signal.h
signals: Adds a very limited, minimal implementation for SIGEV_THREAD
2015-12-30 15:01:14 -06:00
spawn.h
Add internal API task_reparent(), used in posix_spawn(). Move libc/spawn/lib_ps.c to sched/task_posixspawn.c; Move libc/spawn/spawn.h to include/nuttx/spawn.h
2013-01-18 01:52:42 +00:00
spinlock.h
SMP: There were certain conditions that we must avoid by preventing releasing the pending tasks while withn a critical section. But this logic was incomplete; there was no logic to prevent other CPUs from adding new, running tasks while on CPU is in a critical section.
2016-12-27 08:49:07 -06:00
streams.h
setvbuf: Add support for configuration of line buffering.
2017-02-08 11:28:24 -06:00
symtab.h
Modules: Add mod_setsymtab to set global symtol table once. Now we can remove symbol table parameters from the insmod call. This will make implementing an NSH insmod command much easier
2015-12-13 08:10:01 -06:00
time.h
Implements CONFIG_TIME_EXTENDED as we discussed relative to providing the last 3 members of the tm struct and support for filling them in and even using the wday in the STM32 RTC. From David Sidrane.
2015-04-08 06:56:43 -06:00
tls.h
TLS: Simplify
2016-03-11 07:17:32 -06:00
tree.h
Fix error in tree.h
2014-06-02 13:44:44 -06:00
userspace.h
Protected mode: Redesign how the user space heap is accessed from the kernel code. It used to call memory management functions in user space via function pointers in the userspace interface. That is inefficient because the first thing that those memory management functions do is to trap back into the kernel to get the current PID. Worse, that operation can be fatal is certain fragile situations such as when a task is exitting.
2015-07-10 08:37:02 -06:00
vt100.h
Add ANSI/VT100 color codes
2014-11-10 15:10:57 -06:00
wdog.h
Update some wdog-related comments
2017-02-24 10:58:37 -06:00
wqueue.h
Update to use 64-bit timer when available
2016-01-21 11:54:26 -06:00
zoneinfo.h
Move the TZ/Olson zoneinfo data set from apps/system/zoneinfo to libc/zoneinfo
2016-06-30 15:40:37 -06:00
9ad3b375e5