nuttx/configs/ez80f910200zco
patacongo d8ddcb49a8 Need to enable EMAC
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@1564 42af7a65-404d-4744-a932-0658087f49c3
2009-03-03 12:14:03 +00:00
..
include Can't display interrupt glyph because LEDs are interrupt driven 2009-02-28 21:51:23 +00:00
nettest Need to enable EMAC 2009-03-03 12:14:03 +00:00
nsh Sample run 2009-03-01 18:12:37 +00:00
ostest Fixes to serial driver configuratin 2009-03-01 16:23:36 +00:00
src Can't display interrupt glyph because LEDs are interrupt driven 2009-02-28 21:51:23 +00:00
README.txt update 2009-03-01 18:07:36 +00:00

README.txt
^^^^^^^^^^

ZDS-II Compiler Versions
^^^^^^^^^^^^^^^^^^^^^^^^

Different configurations have been build for this board using ZDS-11
Versions 4.11.0 and 4.11.1.  You have to check the files */Make.defs
to see how the build is configured:  Check the definitions of
ZDSVERSION (if present) and ZDSINSTALLDIR.

NOTE:  Different versions of the ZDS-II compiler may also require
different versions of .linkcmd and .zdsproj files as well.

Version 4.11.0

  Although it compiles without error, the 4.11.0 compiler generates
  bad code on one of the files, mm/mm_initialize.c.  Below is a simple work-
  around.

    --- mm/mm_initialize.c.SAVE	2008-02-13 08:06:46.833857700 -0600
    +++ mm/mm_initialize.c	2008-02-13 08:07:26.367608900 -0600
    @@ -94,8 +94,11 @@
    {
       int i;
 
    +#if 0 /* DO NOT CHECK IN */
       CHECK_ALLOCNODE_SIZE;
       CHECK_FREENODE_SIZE;
    +#endif
 
   /* Set up global variables */

Other Versions
  If you use any version of ZDS-II other than 4.11.0 or if you install ZDS-II
  at any location other than the default location, you will have to modify
  two files:  (1) configs/ez80f910200zco/*/setenv.sh and (2)
  configs/ez80f910200zco/*/Make.defs.

Configuration Subdirectories
^^^^^^^^^^^^^^^^^^^^^^^^^^^^

src/ and include/
    These directories contain common logic for all ez80f910200zco
    configurations.

Variations on the basic ez80f910200zco configuration are maintained
in subdirectories.  To configure any specific configuration, do the
following steps:

   cd <nuttx-top-directory>/tools
   ./configure.sh ez80f910200zco/<sub-directory>
   cd <nuttx-top-directgory>
   make

Where <sub-directory> is the specific board configuration that you
wish to build.  The following board-specific configurations are
available:

ostest
    This builds the examples/ostest application for execution from FLASH.
    See examples/README.txt for information about ostest.

nsh
    This configuratino builds the NuttShell (NSH).  That code can be
    found in examples/nsh.  For more information see:  examples/nsh/README.txt
    and Documentation/NuttShell.html.

nettest
    This configuration is used for testing the eZ80F91 EMAC driver.  It
    builds examples/nettest.  See examples/README.txt for more information
    about nettest.

Check out any README.txt files in these <sub-directory>s.