nuttx/boards/hc/m9s12/ne64badge/include/board.h
Petro Karashchenko 8d3bf05fd2 include: fix double include pre-processor guards
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
2022-01-16 11:11:14 -03:00

90 lines
3.6 KiB
C

/****************************************************************************
* boards/hc/m9s12/ne64badge/include/board.h
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership. The
* ASF licenses this file to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance with the
* License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations
* under the License.
*
****************************************************************************/
#ifndef __BOARDS_HC_M9S12_NE64BADGE_INCLUDE_BOARD_H
#define __BOARDS_HC_M9S12_NE64BADGE_INCLUDE_BOARD_H
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#ifndef __ASSEMBLY__
# include <stdint.h>
#endif
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
/* Clocking *****************************************************************/
/* Frequency of the crystal oscillator */
#define HCS12_OSCCLK 16000000 /* 16MHz */
/* PLL Settings
*
* SYNR register controls the multiplication factor of the PLL.
* If the PLL is on, the count in the loop divider (SYNR) register
* effectively multiplies up the PLL clock (PLLCLK) from the reference
* frequency by 2 x (SYNR+1). PLLCLK will not be below
* the minimum VCO frequency (fSCM).
*
* The REFDV register provides a finer granularity for the PLL multiplier
* steps.
* The count in the reference divider divides OSCCLK frequency by REFDV + 1.
*
* PLLCLK = 2 * OSCCLK * (SYNR + 1) / (REFDV + 1)
*
* If (PLLSEL = 1), Bus Clock = PLLCLK / 2
*/
#define HCS12_SYNR_VALUE 0x15
#define HCS12_REFDV_VALUE 0x15
#define HCS12_PLLCLK (2*HCS12_OSCCLK*(HCS12_SYNR+1)/(HCS12_REFDV+1))
#define HCS12_BUSCLK (HSC12_PLLCLK/2)
/* LED definitions **********************************************************/
/* The NE64 Badge board has 2 red LEDs that we will encode as: */
/* LED1 LED2 */
#define LED_STARTED 0 /* OFF OFF = Still initializing */
#define LED_HEAPALLOCATE 0 /* OFF OFF = Still initializing */
#define LED_IRQSENABLED 0 /* OFF OFF = Still initializing */
#define LED_STACKCREATED 1 /* ON OFF = Initialization complete */
#define LED_INIRQ 2 /* NC ON = In an interrupt handler */
#define LED_SIGNAL 2 /* NC ON = In a signal handler */
#define LED_ASSERTION 2 /* NC ON = In an assertion */
#define LED_PANIC 2 /* NC ON = Oops! We crashed. (flashing) */
/* Button definitions *******************************************************/
/* The NE64 badge has 2 switches,
* one labeled SW1 and the other SW2 on the board (but
* referred to as button1 and button2 in some documentation)
*/
#define BUTTON1 1 /* Bit 0: SW1 button is depressed */
#define BUTTON2 2 /* Bit 1: SW2 button is depressed */
#endif /* __BOARDS_HC_M9S12_NE64BADGE_INCLUDE_BOARD_H */