nuttx/boards
Windrow14 190c8787ff arch/xtensa/src/esp32s3/Kconfig|Make.defs|esp32s3_sdmmc.c,
arch/xtensa/src/esp32s3/hardware/esp32s3_sdmmc.h|esp32s3_soc.h,
boards/xtensa/esp32s3/common/include/esp32s3_board_sdmmc.h,
boards/xtensa/esp32s3/common/src/Make.defs|esp32s3_board_sdmmc.c,
boards/xtensa/esp32s3/esp32s3-devkit/src/esp32s3_bringup.c: add SD/mmc driver

Support 1-bit bus width and 4-bit bus width. Support eMMC high speed SDR mode.
Support transfer data with DMA. Support SD clock frequency up to 40MHZ.

Signed-off-by: Yinzhe Wu <Yinzhe.Wu@sony.com>
Reviewed-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Reviewed-by: Jacky Cao <Jacky.Cao@sony.com>
Tested-by: Yinzhe Wu <Yinzhe.Wu@sony.com>
2024-08-19 19:52:39 +08:00
..
arm nuttx/boards:Uniform initialization format for init_array. 2024-08-19 19:48:32 +08:00
arm64 nuttx/boards:Uniform initialization format for init_array. 2024-08-19 19:48:32 +08:00
avr at32uc3a0: Initial work for SimpleMachines' Mizar32-A 2024-07-15 20:46:41 +08:00
dummy
hc/m9s12
mips net: Enable ICMP by default if IPv4 is enabled 2024-07-09 17:08:27 +08:00
misoc/lm32/misoc net: Enable ICMP by default if IPv4 is enabled 2024-07-09 17:08:27 +08:00
or1k/mor1kx/or1k nuttx/boards:Uniform initialization format for init_array. 2024-08-19 19:48:32 +08:00
renesas nuttx/boards:Uniform initialization format for init_array. 2024-08-19 19:48:32 +08:00
risc-v nuttx/boards:Uniform initialization format for init_array. 2024-08-19 19:48:32 +08:00
sim/sim/sim arch/sim/Kconfig: set SIM_FBBPP to 32 by default 2024-08-15 02:38:31 +08:00
sparc fix nxstyle 2024-04-16 19:09:12 +08:00
tricore/tc3xx/tc397 tricore/cmake: add support of cmake build for tricore 2024-07-18 13:40:49 +08:00
x86/qemu/qemu-i486
x86_64/intel64/qemu-intel64 arch/intel64: add support for HPET as system clock 2024-08-01 17:49:41 +08:00
xtensa arch/xtensa/src/esp32s3/Kconfig|Make.defs|esp32s3_sdmmc.c, 2024-08-19 19:52:39 +08:00
z16/z16f/z16f2800100zcog
z80 net: Enable ICMP by default if IPv4 is enabled 2024-07-09 17:08:27 +08:00
.gitignore
Board.mk
boardctl.c board/control: add irq affinity control 2024-03-30 12:21:25 +08:00
CMakeLists.txt
dummy.c
Kconfig boards/esp32s3: Add initial support to the ESP32-S3-Korvo-2 board 2024-08-01 16:04:53 +08:00
Makefile