| .. |
|
a1x
|
Big, very risky change: Remove all occurrences of up_maskack_irq() that disable and enable interrupts with up_ack_irq() that only acknowledges the interrupts. This is only used in interrupt decoding logic. Also remove the logic that unconditionally re-enables interrupts with the interrupt exits. This interferes with the drivers ability to control the interrupt state. This is a necessary, sweeping, global change and unfortunately impossible to test.
|
2015-02-09 16:12:11 -06:00 |
|
arm
|
Add support for dumping board-specific information on assertion. From David Sidrane
|
2015-03-04 07:00:29 -06:00 |
|
armv6-m
|
Add support for dumping board-specific information on assertion. From David Sidrane
|
2015-03-04 07:00:29 -06:00 |
|
armv7-a
|
Add support for dumping board-specific information on assertion. From David Sidrane
|
2015-03-04 07:00:29 -06:00 |
|
armv7-m
|
ARMv7-M MPU. Bad syntax will cause failure to write the correct value to the MPU_RASR register. From Juha Niskanen
|
2015-03-12 08:00:53 -06:00 |
|
c5471
|
Big, very risky change: Remove all occurrences of up_maskack_irq() that disable and enable interrupts with up_ack_irq() that only acknowledges the interrupts. This is only used in interrupt decoding logic. Also remove the logic that unconditionally re-enables interrupts with the interrupt exits. This interferes with the drivers ability to control the interrupt state. This is a necessary, sweeping, global change and unfortunately impossible to test.
|
2015-02-09 16:12:11 -06:00 |
|
calypso
|
Remove CONFIG_DEBUG_STACK. Adding CONFIG_STACK_COLORATION makes this configuration option pointless
|
2015-01-24 06:49:51 -06:00 |
|
common
|
Cortex-M7/SAMV71-XULT: Various fixes for building Cortex-M7 with SAMV71.
|
2015-03-06 10:53:57 -06:00 |
|
dm320
|
arch/: board function prototypes are now in include/nuttx/board.h. Remove from architecture header file; Add inclusion of nuttx/board.h to all files referencing board functions
|
2015-02-27 17:19:38 -06:00 |
|
efm32
|
SAMV71-XULT: Enable 64-bit floating point support
|
2015-03-11 12:30:14 -06:00 |
|
imx
|
arch/: board function prototypes are now in include/nuttx/board.h. Remove from architecture header file; Add inclusion of nuttx/board.h to all files referencing board functions
|
2015-02-27 17:19:38 -06:00 |
|
kinetis
|
arch/: board function prototypes are now in include/nuttx/board.h. Remove from architecture header file; Add inclusion of nuttx/board.h to all files referencing board functions
|
2015-02-27 17:19:38 -06:00 |
|
kl
|
arch/: board function prototypes are now in include/nuttx/board.h. Remove from architecture header file; Add inclusion of nuttx/board.h to all files referencing board functions
|
2015-02-27 17:19:38 -06:00 |
|
lpc17xx
|
SAMV71-XULT: Enable 64-bit floating point support
|
2015-03-11 12:30:14 -06:00 |
|
lpc31xx
|
arch/: board function prototypes are now in include/nuttx/board.h. Remove from architecture header file; Add inclusion of nuttx/board.h to all files referencing board functions
|
2015-02-27 17:19:38 -06:00 |
|
lpc43xx
|
SAMV71-XULT: Enable 64-bit floating point support
|
2015-03-11 12:30:14 -06:00 |
|
lpc214x
|
Remove CONFIG_DEBUG_STACK. Adding CONFIG_STACK_COLORATION makes this configuration option pointless
|
2015-01-24 06:49:51 -06:00 |
|
lpc2378
|
Big, very risky change: Remove all occurrences of up_maskack_irq() that disable and enable interrupts with up_ack_irq() that only acknowledges the interrupts. This is only used in interrupt decoding logic. Also remove the logic that unconditionally re-enables interrupts with the interrupt exits. This interferes with the drivers ability to control the interrupt state. This is a necessary, sweeping, global change and unfortunately impossible to test.
|
2015-02-09 16:12:11 -06:00 |
|
nuc1xx
|
arch/: board function prototypes are now in include/nuttx/board.h. Remove from architecture header file; Add inclusion of nuttx/board.h to all files referencing board functions
|
2015-02-27 17:19:38 -06:00 |
|
sam34
|
Bringing PPPD yet closer to the NuttX coding style
|
2015-03-11 18:47:04 -06:00 |
|
sama5
|
arch/: board function prototypes are now in include/nuttx/board.h. Remove from architecture header file; Add inclusion of nuttx/board.h to all files referencing board functions
|
2015-02-27 17:19:38 -06:00 |
|
samd
|
arch/: board function prototypes are now in include/nuttx/board.h. Remove from architecture header file; Add inclusion of nuttx/board.h to all files referencing board functions
|
2015-02-27 17:19:38 -06:00 |
|
samv7
|
SAMV7: Add TWI/I2C driver (untested)
|
2015-03-12 10:58:11 -06:00 |
|
stm32
|
stm32: usbdev: Fix stale initialization invalidating later NULL check. From Juha Niskanen
|
2015-03-12 08:08:50 -06:00 |
|
str71x
|
arch/: board function prototypes are now in include/nuttx/board.h. Remove from architecture header file; Add inclusion of nuttx/board.h to all files referencing board functions
|
2015-02-27 17:19:38 -06:00 |
|
tiva
|
Tiva TimerLib: Fix a typo in peripheral waiting logic: gptm, not gpio. From Bradley Noyes
|
2015-03-10 12:16:40 -06:00 |
|
.gitignore
|
|
|
|
Makefile
|
Cortex-M7/SAMV71-XULT: Various fixes for building Cortex-M7 with SAMV71.
|
2015-03-06 10:53:57 -06:00 |
