nuttx

a1x

Without lowsyslog() *llerr() is not useful. Eliminate and replace with *err().

2016-06-20 12:44:38 -06:00

arm

Replaces last three commits. Does the same thing, but does it in a way that does not change the usage model.

2016-06-21 05:26:08 -06:00

armv6-m

Replaces last three commits. Does the same thing, but does it in a way that does not change the usage model.

2016-06-21 05:26:08 -06:00

armv7-a

i.MX6: Remove non-cached, inter-cpu memory region. Not a useful concept.

2016-12-13 16:59:50 -06:00

armv7-m

Update TODO and some comments.

2016-12-08 10:24:40 -06:00

armv7-r

For Cortex-A9, should also set ACTLR.FW in SMP mode to enble TLB and cache broadcasts. Does not fix SMP cache problem.

2016-12-07 09:06:41 -06:00

c5471

Eliminate CONFIG_NO_NOINTS. Lots of files changed -> lots of testing needed.

2016-12-03 16:28:19 -06:00

common

i.MX6: Remove non-cached, inter-cpu memory region. Not a useful concept.

2016-12-13 16:59:50 -06:00

dm320

Fix names of pre-processor variables used in header file idempotence

2016-08-06 18:48:45 -06:00

efm32

EFM32: Fix a compilation error

2016-12-07 09:13:13 -06:00

imx1

arch: Disable priority inheritance on all semaphores used for signaling in all SPI drivers

2016-11-03 14:51:44 -06:00

imx6

i.MX6: Remove non-cached, inter-cpu memory region. Not a useful concept.

2016-12-13 16:59:50 -06:00

kinetis

Eliminate CONFIG_NO_NOINTS. Lots of files changed -> lots of testing needed.

2016-12-03 16:28:19 -06:00

kl

Remove minnsh configurations and support logic: up_getc() and lowinstream.

2016-12-13 18:01:23 -06:00

lpc11xx

Remove minnsh configurations and support logic: up_getc() and lowinstream.

2016-12-13 18:01:23 -06:00

lpc17xx

Back out most of 46dbbe837e745d9d43cc9d9963ae52954f694f54. The order is correct -- or, rather, the order is the same as the order that response data is provided. Change the order will break all other drivers.

2016-12-15 07:16:24 -06:00

lpc31xx

arch: Disable priority inheritance on all semaphores used for signaling in all USB host drivers

2016-11-03 17:05:53 -06:00

lpc43xx

LPC43xx SD card: Correct pin configuration options needed for SD card pins.

2016-12-09 10:54:17 -06:00

lpc214x

Fix names of pre-processor variables used in header file idempotence

2016-08-06 18:48:45 -06:00

lpc2378

arch: Disable priority inheritance on all semaphores used for signaling in all I2C/TWI drivers

2016-11-03 14:23:42 -06:00

moxart

Change *err() to either info() or err(ERROR:..), depending upon if an error has occurred.

2016-06-16 16:30:45 -06:00

nuc1xx

Without lowsyslog() *llinfo() is not useful. Eliminate and replace with *info().

2016-06-20 11:59:15 -06:00

sam34

Fix some SMP-related compilation errors

2016-12-09 17:10:59 -06:00

sama5

SAMA5 PWM: Minor improvement to a loop

2016-12-04 15:48:13 -06:00

samdl

Missed a few *llinfo() to *info() conversions

2016-06-20 16:24:09 -06:00

samv7

SAMV7: MCAN: Prevent Interrupt-Flooding of ACKE when not connected to CAN-BUS. An Acknowledge-Error will occur every time no other CAN Node acknowledges the message sent. This will also occur if the device is not connected to the can-bus. The CAN-Standard declares, that the Chip has to retry a given message as long as it is not sent successfully (or it is not cancelled by the application). Every time the chip tries to resend the message an Acknowledge-Error-Interrupt is generated. At high baud rates this can lead in extremely high CPU load just for handling the interrupts (and possibly the error handling in the application). To prevent this Interrupt-Flooding we disable the ACKE once it is seen as long we didn't transfer at least one message successfully.

2016-12-13 11:22:54 -06:00

stm32

STM32: Fix some STM32F7 copy paste errors

2016-12-17 08:31:12 -06:00

stm32f7

Typo in stm32f76xx77xx_pinmap.h edited online with Bitbucket

2016-12-09 15:53:58 +00:00

stm32l4

STM32L4: Correct USART1/2 definitions. Use default mbed UART4 settings

2016-12-01 09:00:59 -06:00

str71x

Remove lowsyslog(). The new syslog() includes all of the functionality of lowsyslog(). No longer any need for two interfaces.

2016-06-20 08:57:08 -06:00

tiva

Support indefinite number of pulses generation in PULSECOUNT mode

2016-12-20 14:08:31 +08:00

tms570

Without lowsyslog() *llerr() is not useful. Eliminate and replace with *err().

2016-06-20 12:44:38 -06:00

.gitignore

…

Makefile

Back out part of previous commit

2016-11-03 08:57:55 -06:00