nuttx

1wire

ds28e17.h edited online with Bitbucket

2018-04-05 12:08:56 +00:00

analog

drivers/analog/lmp92001.c: Add support for the TI LMP92001 device.

2018-12-21 09:46:33 -06:00

audio

Fixes warnings from header files:

2018-11-09 09:10:28 -06:00

binfmt

binfmt/libelf, libs/libc/modlib: Optimize elf load speed: (1) Don't zero out memory, (2) Reduce the initial buffer size to 32 bytes.

2019-01-26 11:34:40 -06:00

can

arch/arm/src/samv7: Add ability for CAN BUS_OFF autorecovery according ISO11898-1:2015. With this change we added an ioctl for triggering the autorecovery sequence for BUS_OFF to the CAN-driver and the SAMV7 low-level driver. According the datasheet: If the device goes Bus_Off, it will set MCAN_CCCR.INIT of its own accord, stopping all bus activities. Once MCAN_CCCR.INIT has been cleared by the processor (application), the device will then wait for 129 occurrences of Bus Idle (129 * 11 consecutive recessive bits) before resuming normal operation. At the end of the Bus_Off recovery sequence, the Error Management Counters will be reset. During the waiting time after the resetting of MCAN_CCCR.INIT, each time a sequence of 11 recessive bits has been monitored, a Bit0 Error code is written to MCAN_PSR.LEC, enabling the processor to readily check up whether the CAN bus is stuck at dominant or continuously disturbed and to monitor the Bus_Off recovery sequence. MCAN_ECR.REC is used to count these sequences.

2018-07-04 07:48:59 -06:00

contactless

Add an instance argument to the SPIDEV definitions.

2017-04-29 12:26:52 -06:00

crypto

This change:

2018-12-19 08:42:48 -06:00

drivers

Merged in raiden00/nuttx_pe (pull request #779 )

2018-12-09 16:31:57 +00:00

eeprom

drivers/eeprom/i2c_xx24xx.c and include/nuttx/eeprom/i2c_xx24xx.h: Add support to Microchip AT24CM02

2018-12-30 11:20:03 -06:00

fs

Addes the ARM mbed littlefs to NuttX

2019-01-09 14:26:51 -06:00

i2c

include/nuttx/i2c/i2c_master.h: Fix a small typo.

2018-12-07 18:53:57 -06:00

input

Make sure that labeling is used consistently in all function headers.

2018-02-01 10:00:02 -06:00

ioexpander

drivers/ioexpander: Support multiple registrations of GPIO signal events.

2018-11-08 08:29:22 -06:00

lcd

include/nuttx/lcd/edid.h: Add extended EDID block IDs

2019-01-20 15:07:57 -06:00

leds

Squashed commit of the following:

2018-07-22 15:13:39 -06:00

lib

binfmt/libelf, libs/libc/modlib: Optimize elf load speed: (1) Don't zero out memory, (2) Reduce the initial buffer size to 32 bytes.

2019-01-26 11:34:40 -06:00

mm

mm/iob/iob_notifier.c: Don't check iob_navail in iob_notifier_setup to avoid a potential race condition.

2019-01-26 09:43:54 -06:00

modem

…

mtd

Extends the MTD configdata device with the following features / additions:

2018-12-20 14:14:40 -06:00

net

Merged in dagar/nuttx/pr-arp_whitespace (pull request #780 )

2018-12-09 20:12:10 +00:00

nx

Make sure that labeling is used consistently in all function headers (part 3).

2018-02-01 12:17:03 -06:00

power

drivers/power/mcp73871.c: Add support to Microchip MPC73871 Battery Charger.

2018-12-31 13:50:17 -06:00

sensors

drivers/sensors/ina3221.h: Fix errors in register addresses and bitfield values.

2019-01-26 09:59:06 -06:00

serial

drivers/usbdev/cdcacm.c: When implemented usb cdc on nrf52840, I found some issues with cdc driver.

2019-01-02 07:49:21 -06:00

spi

Merged in raiden00/nuttx_lora (pull request #821 )

2019-01-20 13:03:11 +00:00

syslog

drivers/syslog: syslog_initialize initialize dev/syslog too and call syslog to add the prefix and timestamp

2018-11-09 08:49:07 -06:00

timers

drivers/timers/mcp794xx.c: Rename the module to mcp794xx.

2019-01-08 13:04:50 -06:00

usb

Updates from coding standard review of PRs 753 and 754

2018-11-09 07:44:22 -06:00

video

Fix lots of typos in C comments and Kconfig help text

2018-07-08 18:24:45 -06:00

wireless

Cosmetic changes for coding style for last PR

2019-01-20 07:38:55 -06:00

.gitignore

…

addrenv.h

…

arch.h

binfmt/, binfmt/libelf/, include/nuttx, libs/libc/machine, libs/libc/modlib, and others: Move elf related arch function to include/nuttx/elf.h because the implementation is located in libs/libc/machine and in order to avoid the conflict with the 3rd party libraries and clean up the file inclusion: (1) Remove redundant elf32.h, (2) Remove nuttx/binfmt/elf.h in libs/libc/machine, (2) Remove nuttx/binfmt/elf.h in modlib, and (4) Rmove nuttx/module.h in modlib.

2019-01-26 11:18:45 -06:00

ascii.h

…

board.h

configs/boardctl.c: Add support for board_app_finalinitialize()

2018-08-28 15:34:31 -06:00

cancelpt.h

Make sure that labeling is used consistently in all function headers.

2018-02-01 10:00:02 -06:00

clock.h

ched/clock/: Remove g_monotonic_basetime and g_clock_monotonic_time since we don't need ensure monotonic time start from zero as state here: http://pubs.opengroup.org/onlinepubs/009696899/functions/clock_getres.html

2018-11-12 06:50:37 -06:00

compiler.h

include/nuttx/compiler.h: Correct support of C-version-specific features. Cannot depend on GCC version because -std=c89 may be used on comomand line. Need instead to use __STDC_VERSION__ to determine if a feature is supported. Also add conditional support inline, depending on C99.

2019-01-09 15:39:54 -06:00

environ.h

fs/proc and sched/environ: Add support for a procfs entry that will permit examining the environment of any task.

2018-08-10 10:16:39 -06:00

envpath.h

binfmt/ and libs/libc: Make exepath_*() more common:

2018-11-08 07:27:14 -06:00

init.h

…

irq.h

include/nuttx/irq.h: Correct some comments.

2018-11-25 16:04:31 -06:00

kmalloc.h

include/nuttx/kmalloc.h: Add {kumm/kmm}_calloc API. Add calloc API for manage user memory and kernel memory in Flat Build/Kernel Build without kernel heap.

2018-08-27 05:55:09 -06:00

kthread.h

Update some comments. Remove references to non-existent CONFIG_MAX_TASK_ARG.

2018-08-08 17:06:46 -06:00

mmcsd.h

…

module.h

…

mqueue.h

include/nutt: Fix definitions used to access OS functions within the libraries. In the FLAT build, we must always set the errno and/or create cancellation points because the same library functions are used within the OS as are used by applications. This could cause issues for the OS but corrects some problems at the user interface.

2018-09-26 06:58:08 -06:00

mutex.h

include/nuttx/mutex.h: Add inline wrapper functions to more clearly support semaphores when used as mutexs.

2018-08-27 06:26:11 -06:00

nuttx.h

Kconfig: Move 'option modules' from NSH_FILE_APPS to BUILD_LOADABLE

2018-08-27 07:06:57 -06:00

page.h

…

pgalloc.h

mm/mm_gran: Add a function to get information about the state of the granuale allocator.

2017-11-14 14:41:03 -06:00

poff.h

…

progmem.h

Merged in ebsong/nuttx (pull request #722 )

2018-09-21 03:18:38 +00:00

pthread.h

pthreads: Add support static pthread stack. Add standard pthread_attr_setstack() and pthread_attr_getstack(). In all cases where the stack is released, add check to see which allocator must be used to free the stack: The user or the kernel allocator.

2018-08-23 09:49:20 -06:00

random.h

Standardization of some function headers.

2018-03-13 09:52:27 -06:00

sched_note.h

…

sched.h

sched/pthread: Implement pthread_key_delete(). This involves some minor changes to the group data structure.

2018-12-28 14:21:19 -06:00

scsi.h

…

sdio.h

This commit adds a new function arch_invalidate_dcache_by_addr(). It takes the same parameters as arch_invalidate_dcache(), but performs invalidation of only the lines in cache that need to be invalidated. This new function could be used as a a direct replacement for arch_invalidate_dcache().

2018-11-20 14:03:42 -06:00

semaphore.h

include/nutt: Fix definitions used to access OS functions within the libraries. In the FLAT build, we must always set the errno and/or create cancellation points because the same library functions are used within the OS as are used by applications. This could cause issues for the OS but corrects some problems at the user interface.

2018-09-26 06:58:08 -06:00

signal.h

Fix all naming resulting from moving move all file system tests from apps/examples/ to apps/testing/ (fstest, nxffs, smart, smart_test).

2019-01-24 14:55:44 -06:00

spawn.h

…

spinlock.h

armv7-a, armv7-r, armv7-m: Add atomic read-add-write and read-subtract-write functions.

2018-02-04 12:22:03 -06:00

streams.h

Make sure that labeling is used consistently in all function headers.

2018-02-01 10:00:02 -06:00

symtab.h

…

time.h

Make sure that labeling is used consistently in all function headers.

2018-02-01 10:00:02 -06:00

tls.h

…

tree.h

include/: Remove dangling space at the end of lines.

2017-06-28 13:30:08 -06:00

userspace.h

Make sure that labeling is used consistently in all function headers.

2018-02-01 10:00:02 -06:00

vt100.h

…

wdog.h

Standardization of some function headers.

2018-03-13 09:52:27 -06:00

wqueue.h

Squashed commit of the following:

2018-09-12 08:57:06 -06:00

zoneinfo.h

include/: Remove dangling space at the end of lines.

2017-06-28 13:30:08 -06:00