sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
9eca886f26
nuttx/drivers/wireless/spirit/include/spirit_pktmbus.h
Gregory Nutt 8c61c2f31b Remove trailing spaces at the end of lines.
2018-08-13 07:39:38 -06:00

350 lines
12 KiB
C
Raw Blame History

/******************************************************************************
* drivers/wireless/spirit/include/spirit_pktmbus.h
* Configuration and management of SPIRIT MBUS packets.
*
* Copyright(c) 2015 STMicroelectronics
* Author: VMA division - AMS
* Version 3.2.2 08-July-2015
*
* Adapted for NuttX by:
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************/
#ifndef __DRVIERS_WIRELESS_SPIRIT_INCLUDE_SPIRIT_PKTMBUS_H
#define __DRVIERS_WIRELESS_SPIRIT_INCLUDE_SPIRIT_PKTMBUS_H
/* This module can be used to manage the configuration of Spirit MBUS packets.
* The user can obtain a packet configuration filling the structure
* struct spirit_pktmbus_init_s, defining in it some general parameters for the Spirit MBUS
* packet format. Since the MBUS protocol is a standard, the configuration
* of a MBUS* packet is very simple to do.
*
* Example:
*
* struct spirit_pktmbus_init_s mbusInit =
* {
* MBUS_SUBMODE_S1_S2_LONG_HEADER, // MBUS submode selection
* 36, // added "01" chips on preamble
* 16 // postamble length in "01" chips
* };
*
* ...
*
* SpiritPktMbusInit(&mbusInit);
*
* ...
*
* The module provides some other functions that can be used to modify
* or read only some configuration parameters.
*/
/******************************************************************************
* Included Files
******************************************************************************/
#include "spirit_regs.h"
#include "spirit_types.h"
#include "spirit_pktcommon.h"
/******************************************************************************
* Pre-processor Definitions
******************************************************************************/
/* Macros used in assertions */
#define IS_MBUS_SUBMODE(mode) \
(((mode) == MBUS_SUBMODE_S1_S2_LONG_HEADER) || \
((mode) == MBUS_SUBMODE_S1_M_S2_T2_OTHER_TO_METER) || \
((mode) == MBUS_SUBMODE_T1_T2_METER_TO_OTHER) || \
((mode) == MBUS_SUBMODE_R2_SHORT_HEADER))
/******************************************************************************
* Public Types
******************************************************************************/
#ifdef __cplusplus
extern "C"
{
#endif
/* Configuration and management of SPIRIT MBUS packets. */
/* Pkt MBUS Exported Types */
/* MBUS submode enumeration. */
enum spirit_mbus_submode_e
{
/* MBUS submode S1, S2 (long header):
* Header length = mbus_prmbl_ctrl + 279 (in "01" bit pairs)
* Sync word = 0x7696 (length 18 bits)
*/
MBUS_SUBMODE_S1_S2_LONG_HEADER = MBUS_CTRL_MBUS_SUBMODE_S1_S2L,
/* MBUS submode S1-m, S2, T2 (other to meter):
* Header length = mbus_prmbl_ctrl + 15 (in "01" bit pairs)
* Sync word = 0x7696 (length 18 bits)
*/
MBUS_SUBMODE_S1_M_S2_T2_OTHER_TO_METER = MBUS_CTRL_MBUS_SUBMODE_S2_S1M_T2_OTHER,
/* MBUS submode T1, T2 (meter to other):
* Header length = mbus_prmbl_ctrl + 19 (in "01" bit pairs):
* Sync word = 0x3d (length 10 bits)
*/
MBUS_SUBMODE_T1_T2_METER_TO_OTHER = MBUS_CTRL_MBUS_SUBMODE_T1_T2_METER,
/* MBUS submode R2, short header:
* Header length = mbus_prmbl_ctrl + 39 (in "01" bit pairs)
* Sync word = 0x7696 (length 18 bits)
*/
MBUS_SUBMODE_R2_SHORT_HEADER = MBUS_CTRL_MBUS_SUBMODE_R2,
};
/* SPIRIT MBUS Packet Init structure definition */
struct spirit_pktmbus_init_s
{
enum spirit_mbus_submode_e submode; /* Specifies the SUBMODE to be
* configured. This field can be any
* value from enum spirit_mbus_submode_e */
uint8_t preamblen; /* Specifies the PREAMBLE length. This
* parameter can be any value between
* 0 and 255 chip sequence '01' */
uint8_t postamblen; /* Specifies the POSTAMBLE length. This
* parameter can be any value between 0
* and 255 chip sequence '01' */
};
/******************************************************************************
* Public Function Prototypes
******************************************************************************/
/******************************************************************************
* Name: spirit_pktmbus_initialize
*
* Description:
* Initializes the SPIRIT MBUS packet according to the specified parameters
* in the struct spirit_pktmbus_init_s structure.
*
* Input Parameters:
* spirit - Reference to a Spirit library state structure instance
* mbusinit - Pointer to a struct spirit_pktmbus_init_s structure that
* contains the configuration information for the specified
* SPIRIT MBUS PACKET FORMAT.
*
* Returned Value:
* Zero (OK) on success; a negated errno value on failure.
*
******************************************************************************/
int spirit_pktmbus_initialize(FAR struct spirit_library_s *spirit,
FAR const struct spirit_pktmbus_init_s *mbusinit);
/******************************************************************************
* Name: spirit_pktmbus_get_setup
*
* Description:
* Returns the SPIRIT MBUS packet structure according to the specified
* parameters in the registers.
*
* Input Parameters:
* spirit - Reference to a Spirit library state structure instance
* mbusinit - MBUS packet init structure.
*
* Returned Value:
* Zero (OK) on success; a negated errno value on failure.
*
******************************************************************************/
int spirit_pktmbus_get_setup(FAR struct spirit_library_s *spirit,
FAR struct spirit_pktmbus_init_s *mbusinit);
/******************************************************************************
* Name: spirit_pktmbus_set_format
*
* Description:
* Configures the MBUS packet format as the one used by SPIRIT.
*
* Input Parameters:
* None.
*
* Returned Value:
* Zero (OK) on success; a negated errno value on failure.
*
******************************************************************************/
int spirit_pktmbus_set_format(FAR struct spirit_library_s *spirit);
/******************************************************************************
* Name: spirit_pktmbus_set_preamble
*
* Description:
* Sets how many chip sequence “01” shall be added in the preamble respect
* to the minimum value as defined according to the specified sub-mode.
*
* Input Parameters:
* spirit - Reference to a Spirit library state structure instance
* preamble - The number of chip sequence.
*
* Returned Value:
* Zero (OK) on success; a negated errno value on failure.
*
******************************************************************************/
int spirit_pktmbus_set_preamble(FAR struct spirit_library_s *spirit,
uint8_t preamble);
/******************************************************************************
* Name: spirit_pktmbus_get_preamble
*
* Description:
* Returns how many chip sequence "01" are added in the preamble respect to
* the minimum value as defined according to the specified sub-mode.
*
* Input Parameters:
* spirit - Reference to a Spirit library state structure instance
*
* Returned Value:
* Preable in number of "01" chip sequences.
*
******************************************************************************/
uint8_t spirit_pktmbus_get_preamble(FAR struct spirit_library_s *spirit);
/******************************************************************************
* Name: spirit_pktmbus_set_postamble
*
* Description:
* Sets how many chip sequence “01” will be used in postamble
*
* Input Parameters:
* spirit - Reference to a Spirit library state structure instance
* postamble - The number of chip sequence.
*
* Returned Value:
* Zero (OK) on success; a negated errno value on failure.
*
******************************************************************************/
int spirit_pktmbus_set_postamble(FAR struct spirit_library_s *spirit,
uint8_t postamble);
/******************************************************************************
* Name: spirit_pktmbus_get_postamble
*
* Description:
* Returns how many chip sequence "01" are used in the postamble
*
* Input Parameters:
* spirit - Reference to a Spirit library state structure instance
*
* Returned Value:
* Postamble in number of "01" chip sequences.
*
******************************************************************************/
uint8_t spirit_pktmbus_get_postamble(FAR struct spirit_library_s *spirit);
/******************************************************************************
* Name: spirit_pktmbus_set_submode
*
* Description:
* Sets the MBUS submode used.
*
* Input Parameters:
* spirit - Reference to a Spirit library state structure instance
* submode - The submode used.
*
* Returned Value:
* Zero (OK) on success; a negated errno value on failure.
*
******************************************************************************/
int spirit_pktmbus_set_submode(FAR struct spirit_library_s *spirit,
enum spirit_mbus_submode_e submode);
/******************************************************************************
* Name: spirit_pktmbus_get_submode
*
* Description:
* Returns the MBUS submode used.
*
* Input Parameters:
* spirit - Reference to a Spirit library state structure instance
*
* Returned Value:
* MBUS submode.
*
******************************************************************************/
enum spirit_mbus_submode_e
spirit_pktmbus_get_submode(FAR struct spirit_library_s *spirit);
/******************************************************************************
* Name: spirit_pktmbus_set_payloadlen
*
* Description:
* Sets the payload length for SPIRIT MBUS packets.
*
* Input Parameters:
* spirit - Reference to a Spirit library state structure instance
* payloadlen - Payload length in bytes.
*
* Returned Value:
* Zero (OK) on success; a negated errno value on failure.
*
******************************************************************************/
int spirit_pktmbus_set_payloadlen(FAR struct spirit_library_s *spirit,
uint16_t payloadlen);
/******************************************************************************
* Name: spirit_pktmbus_get_payloadlen
*
* Description:
* Returns the payload length for SPIRIT MBUS packets.
*
* Input Parameters:
* spirit - Reference to a Spirit library state structure instance
*
* Returned Value:
* Payload length in bytes.
*
******************************************************************************/
uint16_t spirit_pktmbus_get_payloadlen(FAR struct spirit_library_s *spirit);
#ifdef __cplusplus
}
#endif
#endif /* __DRVIERS_WIRELESS_SPIRIT_INCLUDE_SPIRIT_PKTMBUS_H */
Reference in New Issue View Git Blame Copy Permalink