sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
a134178034
nuttx/drivers/wireless/ieee80211/bcmf_netdev.c

1247 lines
35 KiB
C
Raw Blame History

/****************************************************************************
* drivers/wireless/bcmf_netdev.c
*
* Copyright (C) 2017 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#if defined(CONFIG_NET) && defined(CONFIG_IEEE80211_BROADCOM_FULLMAC)
#include <stdint.h>
#include <stdbool.h>
#include <time.h>
#include <string.h>
#include <errno.h>
#include <assert.h>
#include <debug.h>
#include <arpa/inet.h>
#include <nuttx/arch.h>
#include <nuttx/irq.h>
#include <nuttx/wdog.h>
#include <nuttx/wqueue.h>
#include <nuttx/net/arp.h>
#include <nuttx/net/netdev.h>
#include <nuttx/wireless/wireless.h>
#ifdef CONFIG_NET_PKT
# include <nuttx/net/pkt.h>
#endif
#include "bcmf_driver.h"
#include "bcmf_cdc.h"
#include "bcmf_ioctl.h"
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
/* If processing is not done at the interrupt level, then work queue support
* is required.
*/
#if !defined(CONFIG_SCHED_WORKQUEUE)
# error Work queue support is required in this configuration (CONFIG_SCHED_WORKQUEUE)
#else
/* Use the selected work queue */
# if defined(CONFIG_IEEE80211_BROADCOM_HPWORK)
# define BCMFWORK HPWORK
# elif defined(CONFIG_IEEE80211_BROADCOM_HLWORK)
# define BCMFWORK LPWORK
# else
# error Neither CONFIG_IEEE80211_BROADCOM_HPWORK nor CONFIG_IEEE80211_BROADCOM_HLWORK defined
# endif
#endif
/* CONFIG_IEEE80211_BROADCOM_NINTERFACES determines the number of physical interfaces
* that will be supported.
*/
#ifndef CONFIG_IEEE80211_BROADCOM_NINTERFACES
# define CONFIG_IEEE80211_BROADCOM_NINTERFACES 1
#endif
/* TX poll delay = 1 seconds. CLK_TCK is the number of clock ticks per second */
#define BCMF_WDDELAY (1*CLK_TCK)
/* TX timeout = 1 minute */
#define BCMF_TXTIMEOUT (60*CLK_TCK)
/* This is a helper pointer for accessing the contents of the Ethernet header */
#define BUF ((struct eth_hdr_s *)priv->bc_dev.d_buf)
/****************************************************************************
* Private Types
****************************************************************************/
/****************************************************************************
* Private Data
****************************************************************************/
/* These statically allocated structur would mean that only a single
* instance of the device could be supported. In order to support multiple
* devices instances, this data would have to be allocated dynamically.
*/
/* A single packet buffer per device is used here. There might be multiple
* packet buffers in a more complex, pipelined design.
*
* NOTE that if CONFIG_IEEE80211_BROADCOM_NINTERFACES were greater than 1, you would
* need a minimum on one packetbuffer per instance. Much better to be
* allocated dynamically.
*/
static uint8_t g_pktbuf[MAX_NET_DEV_MTU + CONFIG_NET_GUARDSIZE];
/****************************************************************************
* Private Function Prototypes
****************************************************************************/
/* Common TX logic */
static int bcmf_transmit(FAR struct bcmf_dev_s *priv);
static int bcmf_txpoll(FAR struct net_driver_s *dev);
/* Interrupt handling */
static void bcmf_receive(FAR struct bcmf_dev_s *priv);
static void bcmf_txdone(FAR struct bcmf_dev_s *priv);
static void bcmf_interrupt_work(FAR void *arg);
static int bcmf_interrupt(int irq, FAR void *context, FAR void *arg);
/* Watchdog timer expirations */
static void bcmf_txtimeout_work(FAR void *arg);
static void bcmf_txtimeout_expiry(int argc, wdparm_t arg, ...);
static void bcmf_poll_work(FAR void *arg);
static void bcmf_poll_expiry(int argc, wdparm_t arg, ...);
/* NuttX callback functions */
static int bcmf_ifup(FAR struct net_driver_s *dev);
static int bcmf_ifdown(FAR struct net_driver_s *dev);
static void bcmf_txavail_work(FAR void *arg);
static int bcmf_txavail(FAR struct net_driver_s *dev);
#if defined(CONFIG_NET_IGMP) || defined(CONFIG_NET_ICMPv6)
static int bcmf_addmac(FAR struct net_driver_s *dev,
FAR const uint8_t *mac);
#ifdef CONFIG_NET_IGMP
static int bcmf_rmmac(FAR struct net_driver_s *dev,
FAR const uint8_t *mac);
#endif
#ifdef CONFIG_NET_ICMPv6
static void bcmf_ipv6multicast(FAR struct bcmf_dev_s *priv);
#endif
#endif
#ifdef CONFIG_NETDEV_IOCTL
static int bcmf_ioctl(FAR struct net_driver_s *dev, int cmd,
unsigned long arg);
#endif
/****************************************************************************
* Private Functions
****************************************************************************/
/****************************************************************************
* Name: bcmf_transmit
*
* Description:
* Start hardware transmission. Called either from the txdone interrupt
* handling or from watchdog based polling.
*
* Parameters:
* priv - Reference to the driver state structure
*
* Returned Value:
* OK on success; a negated errno on failure
*
* Assumptions:
* May or may not be called from an interrupt handler. In either case,
* the network is locked.
*
****************************************************************************/
static int bcmf_transmit(FAR struct bcmf_dev_s *priv)
{
/* Verify that the hardware is ready to send another packet. If we get
* here, then we are committed to sending a packet; Higher level logic
* must have assured that there is no transmission in progress.
*/
/* Increment statistics */
NETDEV_TXPACKETS(priv->bc_dev);
/* Send the packet: address=priv->bc_dev.d_buf, length=priv->bc_dev.d_len */
/* Enable Tx interrupts */
/* Setup the TX timeout watchdog (perhaps restarting the timer) */
(void)wd_start(priv->bc_txtimeout, BCMF_TXTIMEOUT,
bcmf_txtimeout_expiry, 1, (wdparm_t)priv);
return OK;
}
/****************************************************************************
* Name: bcmf_txpoll
*
* Description:
* The transmitter is available, check if the network has any outgoing
* packets ready to send. This is a callback from devif_poll().
* devif_poll() may be called:
*
* 1. When the preceding TX packet send is complete,
* 2. When the preceding TX packet send timesout and the interface is reset
* 3. During normal TX polling
*
* Parameters:
* dev - Reference to the NuttX driver state structure
*
* Returned Value:
* OK on success; a negated errno on failure
*
* Assumptions:
* May or may not be called from an interrupt handler. In either case,
* the network is locked.
*
****************************************************************************/
static int bcmf_txpoll(FAR struct net_driver_s *dev)
{
FAR struct bcmf_dev_s *priv = (FAR struct bcmf_dev_s *)dev->d_private;
/* If the polling resulted in data that should be sent out on the network,
* the field d_len is set to a value > 0.
*/
if (priv->bc_dev.d_len > 0)
{
/* Look up the destination MAC address and add it to the Ethernet
* header.
*/
#ifdef CONFIG_NET_IPv4
#ifdef CONFIG_NET_IPv6
if (IFF_IS_IPv4(priv->bc_dev.d_flags))
#endif
{
arp_out(&priv->bc_dev);
}
#endif /* CONFIG_NET_IPv4 */
#ifdef CONFIG_NET_IPv6
#ifdef CONFIG_NET_IPv4
else
#endif
{
neighbor_out(&priv->bc_dev);
}
#endif /* CONFIG_NET_IPv6 */
/* Send the packet */
bcmf_transmit(priv);
/* Check if there is room in the device to hold another packet. If not,
* return a non-zero value to terminate the poll.
*/
}
/* If zero is returned, the polling will continue until all connections have
* been examined.
*/
return 0;
}
/****************************************************************************
* Name: bcmf_receive
*
* Description:
* An interrupt was received indicating the availability of a new RX packet
*
* Parameters:
* priv - Reference to the driver state structure
*
* Returned Value:
* None
*
* Assumptions:
* The network is locked.
*
****************************************************************************/
static void bcmf_receive(FAR struct bcmf_dev_s *priv)
{
do
{
/* Check for errors and update statistics */
/* Check if the packet is a valid size for the network buffer
* configuration.
*/
/* Copy the data data from the hardware to priv->bc_dev.d_buf. Set
* amount of data in priv->bc_dev.d_len
*/
#ifdef CONFIG_NET_PKT
/* When packet sockets are enabled, feed the frame into the packet tap */
pkt_input(&priv->bc_dev);
#endif
/* We only accept IP packets of the configured type and ARP packets */
#ifdef CONFIG_NET_IPv4
if (BUF->type == HTONS(ETHTYPE_IP))
{
ninfo("IPv4 frame\n");
NETDEV_RXIPV4(&priv->bc_dev);
/* Handle ARP on input then give the IPv4 packet to the network
* layer
*/
arp_ipin(&priv->bc_dev);
ipv4_input(&priv->bc_dev);
/* If the above function invocation resulted in data that should be
* sent out on the network, the field d_len will set to a value > 0.
*/
if (priv->bc_dev.d_len > 0)
{
/* Update the Ethernet header with the correct MAC address */
#ifdef CONFIG_NET_IPv6
if (IFF_IS_IPv4(priv->bc_dev.d_flags))
#endif
{
arp_out(&priv->bc_dev);
}
#ifdef CONFIG_NET_IPv6
else
{
neighbor_out(&kel->bc_dev);
}
#endif
/* And send the packet */
bcmf_transmit(priv);
}
}
else
#endif
#ifdef CONFIG_NET_IPv6
if (BUF->type == HTONS(ETHTYPE_IP6))
{
ninfo("Iv6 frame\n");
NETDEV_RXIPV6(&priv->bc_dev);
/* Give the IPv6 packet to the network layer */
ipv6_input(&priv->bc_dev);
/* If the above function invocation resulted in data that should be
* sent out on the network, the field d_len will set to a value > 0.
*/
if (priv->bc_dev.d_len > 0)
{
/* Update the Ethernet header with the correct MAC address */
#ifdef CONFIG_NET_IPv4
if (IFF_IS_IPv4(priv->bc_dev.d_flags))
{
arp_out(&priv->bc_dev);
}
else
#endif
#ifdef CONFIG_NET_IPv6
{
neighbor_out(&priv->bc_dev);
}
#endif
/* And send the packet */
bcmf_transmit(priv);
}
}
else
#endif
#ifdef CONFIG_NET_ARP
if (BUF->type == htons(ETHTYPE_ARP))
{
arp_arpin(&priv->bc_dev);
NETDEV_RXARP(&priv->bc_dev);
/* If the above function invocation resulted in data that should be
* sent out on the network, the field d_len will set to a value > 0.
*/
if (priv->bc_dev.d_len > 0)
{
bcmf_transmit(priv);
}
}
else
#endif
{
NETDEV_RXDROPPED(&priv->bc_dev);
}
}
while (1); /* While there are more packets to be processed */
}
/****************************************************************************
* Name: bcmf_txdone
*
* Description:
* An interrupt was received indicating that the last TX packet(s) is done
*
* Parameters:
* priv - Reference to the driver state structure
*
* Returned Value:
* None
*
* Assumptions:
* The network is locked.
*
****************************************************************************/
static void bcmf_txdone(FAR struct bcmf_dev_s *priv)
{
int delay;
/* Check for errors and update statistics */
NETDEV_TXDONE(priv->bc_dev);
/* Check if there are pending transmissions */
/* If no further transmissions are pending, then cancel the TX timeout and
* disable further Tx interrupts.
*/
wd_cancel(priv->bc_txtimeout);
/* And disable further TX interrupts. */
/* In any event, poll the network for new TX data */
(void)devif_poll(&priv->bc_dev, bcmf_txpoll);
}
/****************************************************************************
* Name: bcmf_interrupt_work
*
* Description:
* Perform interrupt related work from the worker thread
*
* Parameters:
* arg - The argument passed when work_queue() was called.
*
* Returned Value:
* OK on success
*
* Assumptions:
* The network is locked.
*
****************************************************************************/
static void bcmf_interrupt_work(FAR void *arg)
{
FAR struct bcmf_dev_s *priv = (FAR struct bcmf_dev_s *)arg;
/* Lock the network and serialize driver operations if necessary.
* NOTE: Serialization is only required in the case where the driver work
* is performed on an LP worker thread and where more than one LP worker
* thread has been configured.
*/
net_lock();
/* Process pending Ethernet interrupts */
/* Get and clear interrupt status bits */
/* Handle interrupts according to status bit settings */
/* Check if we received an incoming packet, if so, call bcmf_receive() */
bcmf_receive(priv);
/* Check if a packet transmission just completed. If so, call bcmf_txdone.
* This may disable further Tx interrupts if there are no pending
* transmissions.
*/
bcmf_txdone(priv);
net_unlock();
/* Re-enable Ethernet interrupts */
#warning Missing logic
}
/****************************************************************************
* Name: bcmf_interrupt
*
* Description:
* Hardware interrupt handler
*
* Parameters:
* irq - Number of the IRQ that generated the interrupt
* context - Interrupt register state save info (architecture-specific)
*
* Returned Value:
* OK on success
*
* Assumptions:
*
****************************************************************************/
static int bcmf_interrupt(int irq, FAR void *context, FAR void *arg)
{
FAR struct bcmf_dev_s *priv = (FAR struct bcmf_dev_s *)arg;
DEBUGASSERT(priv != NULL);
/* Disable further Ethernet interrupts. Because Ethernet interrupts are
* also disabled if the TX timeout event occurs, there can be no race
* condition here.
*/
#warning Missing logic
/* TODO: Determine if a TX transfer just completed */
{
/* If a TX transfer just completed, then cancel the TX timeout so
* there will be no race condition between any subsequent timeout
* expiration and the deferred interrupt processing.
*/
wd_cancel(priv->bc_txtimeout);
}
/* Schedule to perform the interrupt processing on the worker thread. */
work_queue(BCMFWORK, &priv->bc_irqwork, bcmf_interrupt_work, priv, 0);
return OK;
}
/****************************************************************************
* Name: bcmf_txtimeout_work
*
* Description:
* Perform TX timeout related work from the worker thread
*
* Parameters:
* arg - The argument passed when work_queue() as called.
*
* Returned Value:
* OK on success
*
* Assumptions:
* The network is locked.
*
****************************************************************************/
static void bcmf_txtimeout_work(FAR void *arg)
{
FAR struct bcmf_dev_s *priv = (FAR struct bcmf_dev_s *)arg;
/* Lock the network and serialize driver operations if necessary.
* NOTE: Serialization is only required in the case where the driver work
* is performed on an LP worker thread and where more than one LP worker
* thread has been configured.
*/
net_lock();
/* Increment statistics and dump debug info */
NETDEV_TXTIMEOUTS(priv->bc_dev);
/* Then reset the hardware */
/* Then poll the network for new XMIT data */
(void)devif_poll(&priv->bc_dev, bcmf_txpoll);
net_unlock();
}
/****************************************************************************
* Name: bcmf_txtimeout_expiry
*
* Description:
* Our TX watchdog timed out. Called from the timer interrupt handler.
* The last TX never completed. Reset the hardware and start again.
*
* Parameters:
* argc - The number of available arguments
* arg - The first argument
*
* Returned Value:
* None
*
* Assumptions:
* Global interrupts are disabled by the watchdog logic.
*
****************************************************************************/
static void bcmf_txtimeout_expiry(int argc, wdparm_t arg, ...)
{
FAR struct bcmf_dev_s *priv = (FAR struct bcmf_dev_s *)arg;
/* Disable further Ethernet interrupts. This will prevent some race
* conditions with interrupt work. There is still a potential race
* condition with interrupt work that is already queued and in progress.
*/
#warning Missing logic
/* Schedule to perform the TX timeout processing on the worker thread. */
work_queue(BCMFWORK, &priv->bc_irqwork, bcmf_txtimeout_work, priv, 0);
}
/****************************************************************************
* Name: bcmf_poll_process
*
* Description:
* Perform the periodic poll. This may be called either from watchdog
* timer logic or from the worker thread, depending upon the configuration.
*
* Parameters:
* priv - Reference to the driver state structure
*
* Returned Value:
* None
*
* Assumptions:
*
****************************************************************************/
static inline void bcmf_poll_process(FAR struct bcmf_dev_s *priv)
{
}
/****************************************************************************
* Name: bcmf_poll_work
*
* Description:
* Perform periodic polling from the worker thread
*
* Parameters:
* arg - The argument passed when work_queue() as called.
*
* Returned Value:
* OK on success
*
* Assumptions:
* The network is locked.
*
****************************************************************************/
static void bcmf_poll_work(FAR void *arg)
{
FAR struct bcmf_dev_s *priv = (FAR struct bcmf_dev_s *)arg;
/* Lock the network and serialize driver operations if necessary.
* NOTE: Serialization is only required in the case where the driver work
* is performed on an LP worker thread and where more than one LP worker
* thread has been configured.
*/
net_lock();
/* Perform the poll */
/* Check if there is room in the send another TX packet. We cannot perform
* the TX poll if he are unable to accept another packet for transmission.
*/
/* If so, update TCP timing states and poll the network for new XMIT data.
* Hmmm.. might be bug here. Does this mean if there is a transmit in
* progress, we will missing TCP time state updates?
*/
(void)devif_timer(&priv->bc_dev, bcmf_txpoll);
/* Setup the watchdog poll timer again */
(void)wd_start(priv->bc_txpoll, BCMF_WDDELAY, bcmf_poll_expiry, 1,
(wdparm_t)priv);
net_unlock();
}
/****************************************************************************
* Name: bcmf_poll_expiry
*
* Description:
* Periodic timer handler. Called from the timer interrupt handler.
*
* Parameters:
* argc - The number of available arguments
* arg - The first argument
*
* Returned Value:
* None
*
* Assumptions:
* Global interrupts are disabled by the watchdog logic.
*
****************************************************************************/
static void bcmf_poll_expiry(int argc, wdparm_t arg, ...)
{
FAR struct bcmf_dev_s *priv = (FAR struct bcmf_dev_s *)arg;
/* Schedule to perform the interrupt processing on the worker thread. */
work_queue(BCMFWORK, &priv->bc_pollwork, bcmf_poll_work, priv, 0);
}
/****************************************************************************
* Name: bcmf_ifup
*
* Description:
* NuttX Callback: Bring up the Ethernet interface when an IP address is
* provided
*
* Parameters:
* dev - Reference to the NuttX driver state structure
*
* Returned Value:
* None
*
* Assumptions:
*
****************************************************************************/
static int bcmf_ifup(FAR struct net_driver_s *dev)
{
FAR struct bcmf_dev_s *priv = (FAR struct bcmf_dev_s *)dev->d_private;
#ifdef CONFIG_NET_IPv4
ninfo("Bringing up: %d.%d.%d.%d\n",
dev->d_ipaddr & 0xff, (dev->d_ipaddr >> 8) & 0xff,
(dev->d_ipaddr >> 16) & 0xff, dev->d_ipaddr >> 24);
#endif
#ifdef CONFIG_NET_IPv6
ninfo("Bringing up: %04x:%04x:%04x:%04x:%04x:%04x:%04x:%04x\n",
dev->d_ipv6addr[0], dev->d_ipv6addr[1], dev->d_ipv6addr[2],
dev->d_ipv6addr[3], dev->d_ipv6addr[4], dev->d_ipv6addr[5],
dev->d_ipv6addr[6], dev->d_ipv6addr[7]);
#endif
/* Initialize PHYs, the Ethernet interface, and setup up Ethernet interrupts */
/* Instantiate the MAC address from priv->bc_dev.d_mac.ether.ether_addr_octet */
#ifdef CONFIG_NET_ICMPv6
/* Set up IPv6 multicast address filtering */
bcmf_ipv6multicast(priv);
#endif
/* Set and activate a timer process */
(void)wd_start(priv->bc_txpoll, BCMF_WDDELAY, bcmf_poll_expiry, 1,
(wdparm_t)priv);
/* Enable the hardware interrupt */
priv->bc_bifup = true;
#warning Missing logic
return OK;
}
/****************************************************************************
* Name: bcmf_ifdown
*
* Description:
* NuttX Callback: Stop the interface.
*
* Parameters:
* dev - Reference to the NuttX driver state structure
*
* Returned Value:
* None
*
* Assumptions:
*
****************************************************************************/
static int bcmf_ifdown(FAR struct net_driver_s *dev)
{
FAR struct bcmf_dev_s *priv = (FAR struct bcmf_dev_s *)dev->d_private;
irqstate_t flags;
/* Disable the hardware interrupt */
flags = enter_critical_section();
#warning Missing logic
/* Cancel the TX poll timer and TX timeout timers */
wd_cancel(priv->bc_txpoll);
wd_cancel(priv->bc_txtimeout);
/* Put the EMAC in its reset, non-operational state. This should be
* a known configuration that will guarantee the bcmf_ifup() always
* successfully brings the interface back up.
*/
/* Mark the device "down" */
priv->bc_bifup = false;
leave_critical_section(flags);
return OK;
}
/****************************************************************************
* Name: bcmf_txavail_work
*
* Description:
* Perform an out-of-cycle poll on the worker thread.
*
* Parameters:
* arg - Reference to the NuttX driver state structure (cast to void*)
*
* Returned Value:
* None
*
* Assumptions:
* Called on the higher priority worker thread.
*
****************************************************************************/
static void bcmf_txavail_work(FAR void *arg)
{
FAR struct bcmf_dev_s *priv = (FAR struct bcmf_dev_s *)arg;
/* Lock the network and serialize driver operations if necessary.
* NOTE: Serialization is only required in the case where the driver work
* is performed on an LP worker thread and where more than one LP worker
* thread has been configured.
*/
net_lock();
/* Ignore the notification if the interface is not yet up */
if (priv->bc_bifup)
{
/* Check if there is room in the hardware to hold another outgoing packet. */
/* If so, then poll the network for new XMIT data */
(void)devif_poll(&priv->bc_dev, bcmf_txpoll);
}
net_unlock();
}
/****************************************************************************
* Name: bcmf_txavail
*
* Description:
* Driver callback invoked when new TX data is available. This is a
* stimulus perform an out-of-cycle poll and, thereby, reduce the TX
* latency.
*
* Parameters:
* dev - Reference to the NuttX driver state structure
*
* Returned Value:
* None
*
* Assumptions:
* Called in normal user mode
*
****************************************************************************/
static int bcmf_txavail(FAR struct net_driver_s *dev)
{
FAR struct bcmf_dev_s *priv = (FAR struct bcmf_dev_s *)dev->d_private;
/* Is our single work structure available? It may not be if there are
* pending interrupt actions and we will have to ignore the Tx
* availability action.
*/
if (work_available(&priv->bc_pollwork))
{
/* Schedule to serialize the poll on the worker thread. */
work_queue(BCMFWORK, &priv->bc_pollwork, bcmf_txavail_work, priv, 0);
}
return OK;
}
/****************************************************************************
* Name: bcmf_addmac
*
* Description:
* NuttX Callback: Add the specified MAC address to the hardware multicast
* address filtering
*
* Parameters:
* dev - Reference to the NuttX driver state structure
* mac - The MAC address to be added
*
* Returned Value:
* None
*
* Assumptions:
*
****************************************************************************/
#if defined(CONFIG_NET_IGMP) || defined(CONFIG_NET_ICMPv6)
static int bcmf_addmac(FAR struct net_driver_s *dev, FAR const uint8_t *mac)
{
FAR struct bcmf_dev_s *priv = (FAR struct bcmf_dev_s *)dev->d_private;
/* Add the MAC address to the hardware multicast routing table */
return OK;
}
#endif
/****************************************************************************
* Name: bcmf_rmmac
*
* Description:
* NuttX Callback: Remove the specified MAC address from the hardware multicast
* address filtering
*
* Parameters:
* dev - Reference to the NuttX driver state structure
* mac - The MAC address to be removed
*
* Returned Value:
* None
*
* Assumptions:
*
****************************************************************************/
#ifdef CONFIG_NET_IGMP
static int bcmf_rmmac(FAR struct net_driver_s *dev, FAR const uint8_t *mac)
{
FAR struct bcmf_dev_s *priv = (FAR struct bcmf_dev_s *)dev->d_private;
/* Add the MAC address to the hardware multicast routing table */
return OK;
}
#endif
/****************************************************************************
* Name: bcmf_ipv6multicast
*
* Description:
* Configure the IPv6 multicast MAC address.
*
* Parameters:
* priv - A reference to the private driver state structure
*
* Returned Value:
* OK on success; Negated errno on failure.
*
* Assumptions:
*
****************************************************************************/
#ifdef CONFIG_NET_ICMPv6
static void bcmf_ipv6multicast(FAR struct bcmf_dev_s *priv)
{
FAR struct net_driver_s *dev;
uint16_t tmp16;
uint8_t mac[6];
/* For ICMPv6, we need to add the IPv6 multicast address
*
* For IPv6 multicast addresses, the Ethernet MAC is derived by
* the four low-order octets OR'ed with the MAC 33:33:00:00:00:00,
* so for example the IPv6 address FF02:DEAD:BEEF::1:3 would map
* to the Ethernet MAC address 33:33:00:01:00:03.
*
* NOTES: This appears correct for the ICMPv6 Router Solicitation
* Message, but the ICMPv6 Neighbor Solicitation message seems to
* use 33:33:ff:01:00:03.
*/
mac[0] = 0x33;
mac[1] = 0x33;
dev = &priv->dev;
tmp16 = dev->d_ipv6addr[6];
mac[2] = 0xff;
mac[3] = tmp16 >> 8;
tmp16 = dev->d_ipv6addr[7];
mac[4] = tmp16 & 0xff;
mac[5] = tmp16 >> 8;
ninfo("IPv6 Multicast: %02x:%02x:%02x:%02x:%02x:%02x\n",
mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]);
(void)bcmf_addmac(dev, mac);
#ifdef CONFIG_NET_ICMPv6_AUTOCONF
/* Add the IPv6 all link-local nodes Ethernet address. This is the
* address that we expect to receive ICMPv6 Router Advertisement
* packets.
*/
(void)bcmf_addmac(dev, g_ipv6_ethallnodes.ether_addr_octet);
#endif /* CONFIG_NET_ICMPv6_AUTOCONF */
#ifdef CONFIG_NET_ICMPv6_ROUTER
/* Add the IPv6 all link-local routers Ethernet address. This is the
* address that we expect to receive ICMPv6 Router Solicitation
* packets.
*/
(void)bcmf_addmac(dev, g_ipv6_ethallrouters.ether_addr_octet);
#endif /* CONFIG_NET_ICMPv6_ROUTER */
}
#endif /* CONFIG_NET_ICMPv6 */
/****************************************************************************
* Name: bcmf_ioctl
*
* Description:
* Handle network IOCTL commands directed to this device.
*
* Parameters:
* dev - Reference to the NuttX driver state structure
* cmd - The IOCTL command
* arg - The argument for the IOCTL command
*
* Returned Value:
* OK on success; Negated errno on failure.
*
* Assumptions:
*
****************************************************************************/
#ifdef CONFIG_NETDEV_IOCTL
static int bcmf_ioctl(FAR struct net_driver_s *dev, int cmd,
unsigned long arg)
{
FAR struct bcmf_dev_s *priv = (FAR struct bcmf_dev_s *)dev->d_private;
int ret;
/* Decode and dispatch the driver-specific IOCTL command */
switch (cmd)
{
case SIOCSIWFREQ: /* Set channel/frequency (Hz) */
wlwarn("WARNING: SIOCSIWFREQ not implemented\n");
ret = -ENOSYS;
break;
case SIOCGIWFREQ: /* Get channel/frequency (Hz) */
wlwarn("WARNING: SIOCGIWFREQ not implemented\n");
ret = -ENOSYS;
break;
case SIOCSIWMODE: /* Set operation mode */
wlwarn("WARNING: SIOCSIWMODE not implemented\n");
ret = -ENOSYS;
break;
case SIOCGIWMODE: /* Get operation mode */
wlwarn("WARNING: SIOCGIWMODE not implemented\n");
ret = -ENOSYS;
break;
case SIOCSIWAP: /* Set access point MAC addresses */
wlwarn("WARNING: SIOCSIWAP not implemented\n");
ret = -ENOSYS;
break;
case SIOCGIWAP: /* Get access point MAC addresses */
wlwarn("WARNING: SIOCGIWAP not implemented\n");
ret = -ENOSYS;
break;
case SIOCSIWESSID: /* Set ESSID (network name) */
wlwarn("WARNING: SIOCSIWESSID not implemented\n");
ret = -ENOSYS;
break;
case SIOCGIWESSID: /* Get ESSID */
wlwarn("WARNING: SIOCGIWESSID not implemented\n");
ret = -ENOSYS;
break;
case SIOCSIWRATE: /* Set default bit rate (bps) */
wlwarn("WARNING: SIOCSIWRATE not implemented\n");
ret = -ENOSYS;
break;
case SIOCGIWRATE: /* Get default bit rate (bps) */
wlwarn("WARNING: SIOCGIWRATE not implemented\n");
ret = -ENOSYS;
break;
case SIOCSIWTXPOW: /* Set transmit power (dBm) */
wlwarn("WARNING: SIOCSIWTXPOW not implemented\n");
ret = -ENOSYS;
break;
case SIOCGIWTXPOW: /* Get transmit power (dBm) */
wlwarn("WARNING: SIOCGIWTXPOW not implemented\n");
ret = -ENOSYS;
break;
default:
nerr("ERROR: Unrecognized IOCTL command: %d\n", command);
ret = -ENOTTY; /* Special return value for this case */
break;
}
return ret;
}
#endif
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: bcmf_netdev_register
*
* Description:
* Register a network driver and set Broadcom chip in a proper state
*
* Parameters:
* priv - Broadcom driver device
*
* Returned Value:
* OK on success; Negated errno on failure.
*
* Assumptions:
*
****************************************************************************/
int bcmf_netdev_register(FAR struct bcmf_dev_s *priv)
{
int ret;
uint32_t out_len;
/* Initialize network driver structure */
memset(&priv->bc_dev, 0, sizeof(priv->bc_dev));
priv->bc_dev.d_buf = g_pktbuf; /* Single packet buffer */
priv->bc_dev.d_ifup = bcmf_ifup; /* I/F up (new IP address) callback */
priv->bc_dev.d_ifdown = bcmf_ifdown; /* I/F down callback */
priv->bc_dev.d_txavail = bcmf_txavail; /* New TX data callback */
#ifdef CONFIG_NET_IGMP
priv->bc_dev.d_addmac = bcmf_addmac; /* Add multicast MAC address */
priv->bc_dev.d_rmmac = bcmf_rmmac; /* Remove multicast MAC address */
#endif
#ifdef CONFIG_NETDEV_IOCTL
priv->bc_dev.d_ioctl = bcmf_ioctl; /* Handle network IOCTL commands */
#endif
priv->bc_dev.d_private = (FAR void *)priv; /* Used to recover private state from dev */
/* Create a watchdog for timing polling for and timing of transmisstions */
priv->bc_txpoll = wd_create(); /* Create periodic poll timer */
priv->bc_txtimeout = wd_create(); /* Create TX timeout timer */
DEBUGASSERT(priv->bc_txpoll != NULL && priv->bc_txtimeout != NULL);
/* Put the interface in the down state. This usually amounts to resetting
* the device and/or calling bcmf_ifdown().
*/
ret = bcmf_wl_enable(priv, false);
if (ret != OK)
{
return -EIO;
}
/* Query MAC address */
out_len = ETHER_ADDR_LEN;
ret = bcmf_cdc_iovar_request(priv, CHIP_STA_INTERFACE, false,
IOVAR_STR_CUR_ETHERADDR,
priv->bc_dev.d_mac.ether.ether_addr_octet,
&out_len);
if (ret != OK)
{
return -EIO;
}
wlinfo("MAC address is %02X:%02X:%02X:%02X:%02X:%02X\n",
priv->bc_dev.d_mac.ether.ether_addr_octet[0],
priv->bc_dev.d_mac.ether.ether_addr_octet[1],
priv->bc_dev.d_mac.ether.ether_addr_octet[2],
priv->bc_dev.d_mac.ether.ether_addr_octet[3],
priv->bc_dev.d_mac.ether.ether_addr_octet[4],
priv->bc_dev.d_mac.ether.ether_addr_octet[5]);
/* Register the device with the OS so that socket IOCTLs can be performed */
(void)netdev_register(&priv->bc_dev, NET_LL_IEEE80211);
return OK;
}
#endif /* CONFIG_NET && CONFIG_IEEE80211_BROADCOM_FULLMAC */
Reference in New Issue View Git Blame Copy Permalink