a1c991d921
Move boards to boards folder
* boards: rename configs folder to boards
This is the proposed layout after the change:
boards: - folder containing board folders
<board>: - name of each board
drivers: - extra drivers specific for platform
include: - header files for the boars
scripts: - extra scripts specific for platform
src: - board specific code
tools: - extra tools specific for platform
<config>: - board specific configuration(s)
Note:
<xxx> names are dependent on platform
This is a logical change to aim to the arch layout but this is a
huge change it should be done in several steps to lower the risk.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* Kconfig: replace configs with boards
The change is needed after the path change
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* Makefile: replace configs with boards
The change is needed after the path change
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* Makefile.*: replace configs with boards
The change is needed after the path change
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* Make.defs: replace configs with boards
The change is needed after the path change
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* .sh: replace configs with boards
The change is needed after the path change
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* .mk: replace configs with boards
The change is needed after the path change
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* .c & .h: replace configs with boards
The change is needed after the path change
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* .bat: replace configs with boards
The change is needed after the path change
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Approved-by: Gregory Nutt <gnutt@nuttx.org>
|
||
|---|---|---|
| .. | ||
| include | ||
| nsh | ||
| scripts | ||
| src | ||
| Kconfig | ||
| README.txt | ||
Teensy LC README ================ This is the README file for NuttX on the PJRC Teensy LC. The Teensy LC is a DIP style breakout board for the MKL25Z64 and comes with a USB based bootloader. Contributed by Michael Hope. Development Environment ======================= All testing was done with the GNU ARM Embedded 4.9 toolchain on Linux. See https://developer.arm.com/open-source/gnu-toolchain/gnu-rm to download. Once you've configured and built NuttX, flash the resulting nuttx.hex file to the board using the Teensy Loader Application. LEDs ==== The Teensy LC has a single LED. If CONFIG_ARCH_LEDS is defined, then NuttX will update the LED as the board boots. The summary is: * LED off: board booting * LED on: initial stack created * LED flashing: panic. See `include/board.h` for details. Serial Console ============== The serial console is mapped to UART0 and appears on pins 0 (RX) and 1 (TX). Consider using a 3.3 V USB to serial adapter such as the Sparkfun #9717 FTDI cable.