Gregory Nutt fa287e8863 Various fixes/changes from intial testing of the HCI UART on the STM32F4-Discovery board. Re-organized how the Blutetooth network driver is initialized. Added lots of new debug output. Add a new STM32 F4 Discovery configuration for testing the HCI UART. Various fixes to get through initialization (still does not).		2018-04-14 09:23:08 -06:00
..
bt_atomic.c	wireless/bluetooth and include/nutt/net: Add support for Bluetooth IOCTL commands.	2018-03-30 10:50:44 -06:00
bt_atomic.h	wireless/bluetooth and include/nutt/net: Add support for Bluetooth IOCTL commands.	2018-03-30 10:50:44 -06:00
bt_att.c	wireless/bluetooth and net/bluetooth: Clean up some garbage left in Kconfig file that broke 'make menuconfig'. Clean up some craziness with Bluetooth frame length definitions.	2018-04-01 15:21:58 -06:00
bt_att.h	Squashed commit of the following:	2018-04-01 12:25:30 -06:00
bt_buf.c	drivers/bluetooth: Extend device simulation. Now makes it all the way through initialization without error. wireless/bluetooth: Add support for IOCTL commangs to get BR/EDR and LE features.	2018-04-06 16:22:49 -06:00
bt_buf.h	Squashed commit of the following:	2018-04-01 12:25:30 -06:00
bt_conn.c	This commit adds a Bluetooth HCI UART lower half driver for the STM32	2018-04-13 10:36:23 -06:00
bt_conn.h	wireless/bluetooth: Adds most of the logic to get the Tx path working. Still missing the logic to recover the Bluetooth connection structure given the destination address in the socket address.	2018-04-01 14:00:40 -06:00
bt_gatt.c	Squashed commit of the following:	2018-04-01 12:25:30 -06:00
bt_hcicore.c	Various fixes/changes from intial testing of the HCI UART on the STM32F4-Discovery board. Re-organized how the Blutetooth network driver is initialized. Added lots of new debug output. Add a new STM32 F4 Discovery configuration for testing the HCI UART. Various fixes to get through initialization (still does not).	2018-04-14 09:23:08 -06:00
bt_hcicore.h	configs/stm32fdiscovery: Add support in bringup logic to initialize the HCI UART and register the HCI UART network device.	2018-04-13 14:53:11 -06:00
bt_ioctl.c	drivers/bluetooth: Extend device simulation. Now makes it all the way through initialization without error. wireless/bluetooth: Add support for IOCTL commangs to get BR/EDR and LE features.	2018-04-06 16:22:49 -06:00
bt_ioctl.h	This comment adds (1) basic support for AF_BLUETOOTH sockets. The logic compiles but is still incomplete. Support for Bluetooth is general is still dependent on CONFIG_EXPERMIMENTAL because it is not yet ready for used.	2018-03-31 14:55:03 -06:00
bt_keys.c	This commit brings in the Bluetooth stack from the Intel/Zephyr arduino101_firmware_source-v1.tar package.	2018-03-29 12:39:22 -06:00
bt_keys.h	This commit brings in the Bluetooth stack from the Intel/Zephyr arduino101_firmware_source-v1.tar package.	2018-03-29 12:39:22 -06:00
bt_l2cap.c	wireless/bluetooth: Adds most of the logic to get the Tx path working. Still missing the logic to recover the Bluetooth connection structure given the destination address in the socket address.	2018-04-01 14:00:40 -06:00
bt_l2cap.h	Squashed commit of the following:	2018-04-01 12:25:30 -06:00
bt_netdev.c	Various fixes/changes from intial testing of the HCI UART on the STM32F4-Discovery board. Re-organized how the Blutetooth network driver is initialized. Added lots of new debug output. Add a new STM32 F4 Discovery configuration for testing the HCI UART. Various fixes to get through initialization (still does not).	2018-04-14 09:23:08 -06:00
bt_queue.c	wireless/bluetooth: A few trivial fixes from initial testing with the simulator. The simulated Bluetooth device is probably going to be in adequate for any level of testing.	2018-04-03 16:28:22 -06:00
bt_queue.h	wireless/bluetooth: With change the test with the simulated bluetooth driver can get all the way up the point where it determines that the attached controller is not LE capable. I am not sure how much first to take the simulation. The time would probably be better invested in bringing up real hardware.	2018-04-03 17:57:06 -06:00
bt_smp.c	drivers/bluetooth: Extend device simulation. Now makes it all the way through initialization without error. wireless/bluetooth: Add support for IOCTL commangs to get BR/EDR and LE features.	2018-04-06 16:22:49 -06:00
bt_smp.h	Squashed commit of the following:	2018-04-01 12:25:30 -06:00
bt_uuid.c	This commit brings in the Bluetooth stack from the Intel/Zephyr arduino101_firmware_source-v1.tar package.	2018-03-29 12:39:22 -06:00
Kconfig	wireless/bluetooth and net/bluetooth: Clean up some garbage left in Kconfig file that broke 'make menuconfig'. Clean up some craziness with Bluetooth frame length definitions.	2018-04-01 15:21:58 -06:00
Make.defs	This comment adds (1) basic support for AF_BLUETOOTH sockets. The logic compiles but is still incomplete. Support for Bluetooth is general is still dependent on CONFIG_EXPERMIMENTAL because it is not yet ready for used.	2018-03-31 14:55:03 -06:00