nuttx

History

ligd 412d030149 boards: move USERMAIN_XX out of INIT_ENTRYPOINT Signed-off-by: ligd <liguiding1@xiaomi.com>		2021-12-24 08:23:30 -06:00
..
configs/nsh	boards: move USERMAIN_XX out of INIT_ENTRYPOINT	2021-12-24 08:23:30 -06:00
include	Refine the preprocessor conditional guard style (#190 )	2020-01-31 19:07:39 +01:00
scripts	boards: Remove -nostartfiles -nodefaultlibs from LDFLAGS	2021-09-13 08:58:25 +08:00
src	Rename CONFIG_LIB_BOARDCTL to CONFIG_BOARDCTL	2021-08-06 13:58:26 +02:00
Kconfig
README.txt	Change all 'Nuttx' to 'NuttX'	2020-10-20 01:45:06 -07:00

README.txt

There's not much here:

EXT1 - P3 0:7 are used for LEDs.

UEXT pin 3/4 -TXD2/RXD2- is UART2.

The board I have has the revision '-' of LPC2378 even though I got the board
more than 2 years after the chip revision was released :-( .
I can't get NuttX to work if I fully enabled the MAM.

I used FTDI ft232 usb-serial with nsh piping as seen on the screenshot.