sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
a5a25f72ab
nuttx/drivers/ioexpander/tca64xx.h
Alin Jerpelea c798076084 drivers: Author Sebastien Lorquet: update licenses to Apache 
Sebastien Lorquet has submitted the ICL and we can migrate the licenses
 to Apache.

Gregory Nutt has submitted the SGA and we can migrate the licenses
 to Apache.

Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
2021-03-20 19:22:58 -07:00

228 lines
8.0 KiB
C
Raw Blame History

/****************************************************************************
* drivers/ioexpander/tca64xx.h
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership. The
* ASF licenses this file to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance with the
* License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations
* under the License.
*
****************************************************************************/
/* References:
* "16-bit I2C-bus and SMBus I/O port with interrupt product datasheet",
* Rev. 08 - 22 October 2009, NXP
*/
#ifndef __DRIVERS_IOEXPANDER_TCA64XX_H
#define __DRIVERS_IOEXPANDER_TCA64XX_H
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <nuttx/wdog.h>
#include <nuttx/clock.h>
#include <nuttx/semaphore.h>
#include <nuttx/wqueue.h>
#include <nuttx/ioexpander/ioexpander.h>
#include <nuttx/ioexpander/tca64xx.h>
#include <nuttx/i2c/i2c_master.h>
#include <nuttx/irq.h>
#if defined(CONFIG_IOEXPANDER) && defined(CONFIG_IOEXPANDER_TCA64XX)
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
/* Configuration ************************************************************/
/* Prerequisites:
* CONFIG_I2C
* I2C support is required
* CONFIG_IOEXPANDER
* Enables I/O expander support
*
* CONFIG_IOEXPANDER_TCA64XX
* Enables support for the TCA64XX driver (Needs CONFIG_INPUT)
* CONFIG_TCA64XX_MULTIPLE
* Can be defined to support multiple TCA64XX devices on board.
* CONFIG_TCA64XX_INT_NCALLBACKS
* Maximum number of supported pin interrupt callbacks.
* CONFIG_TCA64XX_INT_POLL
* Enables a poll for missed interrupts
* CONFIG_TCA64XX_INT_POLLDELAY
* If CONFIG_TCA64XX_INT_POLL=y, then this is the delay in microseconds
* between polls for missed interrupts.
*/
#ifndef CONFIG_I2C
# error "CONFIG_I2C is required by TCA64XX"
#endif
#ifdef CONFIG_IOEXPANDER_INT_ENABLE
# ifndef CONFIG_TCA64XX_INT_NCALLBACKS
# define CONFIG_TCA64XX_INT_NCALLBACKS 4
# endif
#endif
#ifdef CONFIG_IOEXPANDER_INT_ENABLE
# ifndef CONFIG_SCHED_WORKQUEUE
# error Work queue support required. CONFIG_SCHED_WORKQUEUE must be selected.
# endif
#endif
#ifndef CONFIG_TCA64XX_INT_POLLDELAY
# define CONFIG_TCA64XX_INT_POLLDELAY 500000
#endif
/* TCA64XX Definitions ******************************************************/
/* I2C frequency */
#define TCA64XX_I2C_MAXFREQUENCY 400000 /* 400KHz */
/* TCA64XX Parts ************************************************************/
#define TCA6408_INPUT_REG 0x00
#define TCA6408_OUTPUT_REG 0x01
#define TCA6408_POLARITY_REG 0x02
#define TCA6408_CONFIG_REG 0x03
#define TCA6408_NR_GPIOS 8
#define TCA6416_INPUT0_REG 0x00
#define TCA6416_INPUT1_REG 0x01
#define TCA6416_OUTPUT0_REG 0x02
#define TCA6416_OUTPUT1_REG 0x03
#define TCA6416_POLARITY0_REG 0x04
#define TCA6416_POLARITY1_REG 0x05
#define TCA6416_CONFIG0_REG 0x06
#define TCA6416_CONFIG1_REG 0x07
#define TCA6416_NR_GPIOS 16
#define TCA6424_INPUT0_REG 0x00
#define TCA6424_INPUT1_REG 0x01
#define TCA6424_INPUT2_REG 0x02
#define TCA6424_OUTPUT0_REG 0x04
#define TCA6424_OUTPUT1_REG 0x05
#define TCA6424_OUTPUT2_REG 0x06
#define TCA6424_POLARITY0_REG 0x08
#define TCA6424_POLARITY1_REG 0x09
#define TCA6424_POLARITY2_REG 0x0A
#define TCA6424_CONFIG0_REG 0x0C
#define TCA6424_CONFIG1_REG 0x0D
#define TCA6424_CONFIG2_REG 0x0E
#define TCA6424_NR_GPIOS 24
#define TCA64XX_NR_GPIO_MAX TCA6424_NR_GPIOS
/* 1us (datasheet: reset pulse duration (Tw) is 4ns */
#define TCA64XX_TW 1
/* 1us (datasheet: time to reset (Treset) is 600ns */
#define TCA64XX_TRESET 1
#define TCA64XX_IRQ_TYPE_EDGE_BOTH 0x00000000
#define TCA64XX_IRQ_TYPE_EDGE_RISING 0x00000001
#define TCA64XX_IRQ_TYPE_EDGE_FALLING 0x00000002
#define TCA64XX_IRQ_TYPE_LEVEL_HIGH 0x00000001
#define TCA64XX_IRQ_TYPE_LEVEL_LOW 0x00000002
#define TCA64XX_IRQ_TYPE_EDGE 0x00000000
#define TCA64XX_IRQ_TYPE_LEVEL 0x00000001
#define TCA64XX_POLLDELAY (CONFIG_TCA64XX_INT_POLLDELAY / USEC_PER_TICK)
#define TCA64_LEVEL_SENSITIVE(d,p) \
(((d)->trigger & ((ioe_pinset_t)1 << (p))) == 0)
#define TCA64_LEVEL_HIGH(d,p) \
(((d)->level[0] & ((ioe_pinset_t)1 << (p))) != 0)
#define TCA64_LEVEL_LOW(d,p) \
(((d)->level[1] & ((ioe_pinset_t)1 << (p))) != 0)
#define TCA64_EDGE_SENSITIVE(d,p) \
(((d)->trigger & ((ioe_pinset_t)1 << (p))) != 0)
#define TCA64_EDGE_RISING(d,p) \
(((d)->level[0] & ((ioe_pinset_t)1 << (p))) != 0)
#define TCA64_EDGE_FALLING(d,p) \
(((d)->level[1] & ((ioe_pinset_t)1 << (p))) != 0)
#define TCA64_EDGE_BOTH(d,p) \
(TCA64_LEVEL_RISING(d,p) && TCA64_LEVEL_FALLING(d,p))
/****************************************************************************
* Public Types
****************************************************************************/
/* This structure represents the configuration of one part */
struct tca64_part_s
{
uint8_t tp_id; /* Part ID (see enum tca64xx_part_e) */
uint8_t tp_ngpios; /* Number of supported GPIOs */
uint8_t tp_input; /* Address of first input register */
uint8_t tp_output; /* Address of first output register */
uint8_t tp_polarity; /* Address of first polarity register */
uint8_t tp_config; /* Address of first configuration register */
};
#ifdef CONFIG_IOEXPANDER_INT_ENABLE
/* This type represents on registered pin interrupt callback */
struct tca64_callback_s
{
ioe_pinset_t pinset; /* Set of pin interrupts that will generate
* the callback. */
ioe_callback_t cbfunc; /* The saved callback function pointer */
FAR void *cbarg; /* Callback argument */
};
#endif
/* This structure represents the state of the TCA64XX driver */
struct tca64_dev_s
{
struct ioexpander_dev_s dev; /* Nested structure to allow casting as public gpio
* expander. */
FAR struct tca64_config_s *config; /* Board configuration data */
FAR struct i2c_master_s *i2c; /* Saved I2C driver instance */
uint8_t part; /* TCA64xx part ID (see enum tca64xx_part_e) */
sem_t exclsem; /* Mutual exclusion */
#ifdef CONFIG_IOEXPANDER_INT_ENABLE
#ifdef CONFIG_TCA64XX_INT_POLL
struct wdog_s wdog; /* Timer used to poll for missed interrupts */
#endif
ioe_pinset_t input; /* Last input registers */
ioe_pinset_t intstat; /* Pending interrupts */
ioe_pinset_t trigger; /* Bit encoded: 0=level 1=edge */
ioe_pinset_t level[2]; /* Bit encoded: 01=high/rising, 10 low/falling, 11 both */
struct work_s work; /* Supports the interrupt handling "bottom half" */
/* Saved callback information for each I/O expander client */
struct tca64_callback_s cb[CONFIG_TCA64XX_INT_NCALLBACKS];
#endif
};
#endif /* CONFIG_IOEXPANDER && CONFIG_IOEXPANDER_TCA64XX */
#endif /* __DRIVERS_IOEXPANDER_TCA64XX_H */
Reference in New Issue View Git Blame Copy Permalink