nuttx

History

Xiang Xiao b329e2377d boards: Move toolchain related variables to Toolchain.defs 1.It make sense to let Toolchain.defs give the default value 2.The board can still change if the default isn't suitable 3.Avoid the same definition spread more than 200 Make.defs Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com> Change-Id: Ic2649f1c7689bcf59c105ca8db61cad45b6e0e64		2020-07-20 17:10:37 +01:00
..
configs/usbnsh	boards: Remove the unused CONFIG_xxx_CXXINITIALIZE=y	2020-07-01 10:41:37 -06:00
include	Refine the preprocessor conditional guard style (#190 )	2020-01-31 19:07:39 +01:00
scripts	boards: Move toolchain related variables to Toolchain.defs	2020-07-20 17:10:37 +01:00
src	Fix nxstyle issue	2020-06-07 19:28:10 +01:00
Kconfig	Merged in alinjerpelea/nuttx (pull request #967 )	2019-08-07 20:49:39 +00:00
README.txt	Merged in alinjerpelea/nuttx (pull request #967 )	2019-08-07 20:49:39 +00:00

README.txt

README
======

The NuttX configuration for the Olimex STM32-H405 is based on the configuration
Olimex STM32-P207.

It was tested with the NuttX EABI "buildroot" Toolchain.

Debugging with OpenOCD via an Olimex ARM-USB-TINY-H works. Note that
CONFIG_DEBUG_SYMBOLS and CONFIG_STM32_DISABLE_IDLE_SLEEP_DURING_DEBUG
are enabled so that the JTAG connection is not disconnected by the idle
loop.

Make sure that '# CONFIG_NSH_CONDEV is not set' is in the .config file - it defaults
to '/dev/console' which makes problems with the shell over USB.

The following peripherals are enabled in this configuration.
 - LED:        Shows the system status

 - Button:     Built in app 'buttons' works.

 - ADC:        ADC1 samples ADC_IN1. Built in app 'adc' works.

 - USB-FS-OTG: The console is running on the virtual serial port. Note that you
               have to press enter three times until NSH appears.

 - CAN:        Built in app 'can' is enabled but not tested, since no CAN transceiver
               is on board.