sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
a743fed63d
nuttx/net/tcp/tcp_sendfile.c
Alin Jerpelea 91a5f90a7f author: UVC Ingenieure : update licenses to Apache 
Gregory Nutt has submitted the SGA
UVC Ingenieure has submitted the SGA
Max Holtzberg has submitted the ICLA

as a result we can migrate the licenses to Apache.

Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
2021-09-15 15:57:55 +08:00

615 lines
18 KiB
C
Raw Blame History

/****************************************************************************
* net/tcp/tcp_sendfile.c
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership. The
* ASF licenses this file to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance with the
* License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations
* under the License.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <sys/stat.h>
#include <sys/types.h>
#include <sys/socket.h>
#include <fcntl.h>
#include <inttypes.h>
#include <stdint.h>
#include <stdbool.h>
#include <stdlib.h>
#include <string.h>
#include <unistd.h>
#include <assert.h>
#include <errno.h>
#include <debug.h>
#include <arch/irq.h>
#include <nuttx/semaphore.h>
#include <nuttx/fs/fs.h>
#include <nuttx/net/net.h>
#include <nuttx/net/netdev.h>
#include <nuttx/net/arp.h>
#include <nuttx/net/tcp.h>
#include "netdev/netdev.h"
#include "devif/devif.h"
#include "arp/arp.h"
#include "icmpv6/icmpv6.h"
#include "neighbor/neighbor.h"
#include "socket/socket.h"
#include "tcp/tcp.h"
#if defined(CONFIG_NET_SENDFILE) && defined(CONFIG_NET_TCP) && \
defined(NET_TCP_HAVE_STACK)
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
#define TCPIPv4BUF ((struct tcp_hdr_s *)&dev->d_buf[NET_LL_HDRLEN(dev) + IPv4_HDRLEN])
#define TCPIPv6BUF ((struct tcp_hdr_s *)&dev->d_buf[NET_LL_HDRLEN(dev) + IPv6_HDRLEN])
/****************************************************************************
* Private Types
****************************************************************************/
/* This structure holds the state of the send operation until it can be
* operated upon from the driver poll event.
*/
struct sendfile_s
{
FAR struct socket *snd_sock; /* Points to the parent socket structure */
FAR struct devif_callback_s *snd_datacb; /* Data callback */
FAR struct devif_callback_s *snd_ackcb; /* ACK callback */
FAR struct file *snd_file; /* File structure of the input file */
sem_t snd_sem; /* Used to wake up the waiting thread */
off_t snd_foffset; /* Input file offset */
size_t snd_flen; /* File length */
ssize_t snd_sent; /* The number of bytes sent */
uint32_t snd_isn; /* Initial sequence number */
uint32_t snd_acked; /* The number of bytes acked */
};
/****************************************************************************
* Private Functions
****************************************************************************/
static uint16_t ack_eventhandler(FAR struct net_driver_s *dev,
FAR void *pvconn,
FAR void *pvpriv, uint16_t flags)
{
FAR struct sendfile_s *pstate = (FAR struct sendfile_s *)pvpriv;
ninfo("flags: %04x\n", flags);
if ((flags & TCP_ACKDATA) != 0)
{
FAR struct tcp_hdr_s *tcp;
/* Get the offset address of the TCP header */
#ifdef CONFIG_NET_IPv6
#ifdef CONFIG_NET_IPv4
if (IFF_IS_IPv6(dev->d_flags))
#endif
{
DEBUGASSERT(pstate->snd_sock->s_domain == PF_INET6);
tcp = TCPIPv6BUF;
}
#endif /* CONFIG_NET_IPv6 */
#ifdef CONFIG_NET_IPv4
#ifdef CONFIG_NET_IPv6
else
#endif
{
DEBUGASSERT(pstate->snd_sock->s_domain == PF_INET);
tcp = TCPIPv4BUF;
}
#endif /* CONFIG_NET_IPv4 */
/* The current acknowledgement number number is the (relative) offset
* of the of the next byte needed by the receiver. The snd_isn is the
* offset of the first byte to send to the receiver. The difference
* is the number of bytes to be acknowledged.
*/
pstate->snd_acked = tcp_getsequence(tcp->ackno) - pstate->snd_isn;
ninfo("ACK: acked=%" PRId32 " sent=%zd flen=%zu\n",
pstate->snd_acked, pstate->snd_sent, pstate->snd_flen);
dev->d_sndlen = 0;
flags &= ~TCP_ACKDATA;
}
else if ((flags & TCP_REXMIT) != 0)
{
nwarn("WARNING: TCP_REXMIT\n");
/* Yes.. in this case, reset the number of bytes that have been sent
* to the number of bytes that have been ACKed.
*/
pstate->snd_sent = pstate->snd_acked;
}
/* Check for a loss of connection */
else if ((flags & TCP_DISCONN_EVENTS) != 0)
{
FAR struct socket *psock = pstate->snd_sock;
nwarn("WARNING: Lost connection\n");
/* We could get here recursively through the callback actions of
* tcp_lost_connection(). So don't repeat that action if we have
* already been disconnected.
*/
DEBUGASSERT(psock != NULL);
if (_SS_ISCONNECTED(psock->s_flags))
{
/* Report not connected */
tcp_lost_connection(psock, pstate->snd_ackcb, flags);
}
/* Report not connected */
pstate->snd_sent = -ENOTCONN;
}
/* Prohibit further callbacks */
pstate->snd_ackcb->flags = 0;
pstate->snd_ackcb->priv = NULL;
pstate->snd_ackcb->event = NULL;
/* Wake up the waiting thread */
nxsem_post(&pstate->snd_sem);
return flags;
}
/****************************************************************************
* Name: sendfile_eventhandler
*
* Description:
* This function is called to perform the actual send operation when
* polled by the lower, device interfacing layer.
*
* Input Parameters:
* dev The structure of the network driver that caused the event
* conn The connection structure associated with the socket
* flags Set of events describing why the callback was invoked
*
* Returned Value:
* None
*
* Assumptions:
* The network is locked
*
****************************************************************************/
static uint16_t sendfile_eventhandler(FAR struct net_driver_s *dev,
FAR void *pvconn, FAR void *pvpriv,
uint16_t flags)
{
FAR struct tcp_conn_s *conn = (FAR struct tcp_conn_s *)pvconn;
FAR struct sendfile_s *pstate = (FAR struct sendfile_s *)pvpriv;
int ret;
/* Check for a loss of connection */
if ((flags & TCP_DISCONN_EVENTS) != 0)
{
FAR struct socket *psock = pstate->snd_sock;
nwarn("WARNING: Lost connection\n");
/* We could get here recursively through the callback actions of
* tcp_lost_connection(). So don't repeat that action if we have
* already been disconnected.
*/
DEBUGASSERT(psock != NULL);
if (_SS_ISCONNECTED(psock->s_flags))
{
/* Report not connected */
tcp_lost_connection(psock, pstate->snd_datacb, flags);
}
/* Report not connected */
pstate->snd_sent = -ENOTCONN;
goto end_wait;
}
/* The TCP socket is connected and, hence, should be bound to a device.
* Make sure that the polling device is the own that we are bound to.
*/
DEBUGASSERT(conn);
DEBUGASSERT(conn->dev != NULL);
if (dev != conn->dev)
{
return flags;
}
ninfo("flags: %04x acked: %" PRId32 " sent: %zd\n",
flags, pstate->snd_acked, pstate->snd_sent);
/* We get here if (1) not all of the data has been ACKed, (2) we have been
* asked to retransmit data, (3) the connection is still healthy, and (4)
* the outgoing packet is available for our use. In this case, we are
* now free to send more data to receiver -- UNLESS the buffer contains
* unprocessing incoming data. In that event, we will have to wait for the
* next polling cycle.
*/
if ((flags & TCP_NEWDATA) == 0 && pstate->snd_sent < pstate->snd_flen)
{
/* Get the amount of data that we can send in the next packet */
uint32_t sndlen = pstate->snd_flen - pstate->snd_sent;
if (sndlen > conn->mss)
{
sndlen = conn->mss;
}
/* Check if we have "space" in the window */
if ((pstate->snd_sent - pstate->snd_acked + sndlen) < conn->snd_wnd)
{
uint32_t seqno;
/* Then set-up to send that amount of data. (this won't actually
* happen until the polling cycle completes).
*/
ret = file_seek(pstate->snd_file,
pstate->snd_foffset + pstate->snd_sent, SEEK_SET);
if (ret < 0)
{
nerr("ERROR: Failed to lseek: %d\n", ret);
pstate->snd_sent = ret;
goto end_wait;
}
ret = file_read(pstate->snd_file, dev->d_appdata, sndlen);
if (ret < 0)
{
nerr("ERROR: Failed to read from input file: %d\n", (int)ret);
pstate->snd_sent = ret;
goto end_wait;
}
dev->d_sndlen = sndlen;
/* Set the sequence number for this packet. NOTE: The network
* updates sndseq on recept of ACK *before* this function is
* called. In that case sndseq will point to the next
* unacknowledge byte (which might have already been sent). We
* will overwrite the value of sndseq here before the packet is
* sent.
*/
seqno = pstate->snd_sent + pstate->snd_isn;
ninfo("SEND: sndseq %08" PRIx32 "->%08" PRIx32 " len: %d\n",
tcp_getsequence(conn->sndseq), seqno, ret);
tcp_setsequence(conn->sndseq, seqno);
/* Update the amount of data sent (but not necessarily ACKed) */
pstate->snd_sent += sndlen;
ninfo("pid: %d SEND: acked=%" PRId32 " sent=%zd flen=%zu\n",
getpid(),
pstate->snd_acked, pstate->snd_sent, pstate->snd_flen);
}
else
{
nwarn("WARNING: Window full, wait for ack\n");
goto wait;
}
}
if (pstate->snd_sent >= pstate->snd_flen
&& pstate->snd_acked < pstate->snd_flen)
{
/* All data has been sent, but there are outstanding ACK's */
goto wait;
}
end_wait:
/* Do not allow any further callbacks */
pstate->snd_datacb->flags = 0;
pstate->snd_datacb->priv = NULL;
pstate->snd_datacb->event = NULL;
/* Wake up the waiting thread */
nxsem_post(&pstate->snd_sem);
wait:
return flags;
}
/****************************************************************************
* Name: sendfile_txnotify
*
* Description:
* Notify the appropriate device driver that we are have data ready to
* be send (TCP)
*
* Input Parameters:
* psock - Socket state structure
* conn - The TCP connection structure
*
* Returned Value:
* None
*
****************************************************************************/
static inline void sendfile_txnotify(FAR struct socket *psock,
FAR struct tcp_conn_s *conn)
{
#ifdef CONFIG_NET_IPv4
#ifdef CONFIG_NET_IPv6
/* If both IPv4 and IPv6 support are enabled, then we will need to select
* the device driver using the appropriate IP domain.
*/
if (psock->s_domain == PF_INET)
#endif
{
/* Notify the device driver that send data is available */
netdev_ipv4_txnotify(conn->u.ipv4.laddr, conn->u.ipv4.raddr);
}
#endif /* CONFIG_NET_IPv4 */
#ifdef CONFIG_NET_IPv6
#ifdef CONFIG_NET_IPv4
else /* if (psock->s_domain == PF_INET6) */
#endif /* CONFIG_NET_IPv4 */
{
/* Notify the device driver that send data is available */
DEBUGASSERT(psock->s_domain == PF_INET6);
netdev_ipv6_txnotify(conn->u.ipv6.laddr, conn->u.ipv6.raddr);
}
#endif /* CONFIG_NET_IPv6 */
}
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: tcp_sendfile
*
* Description:
* The tcp_sendfile() call may be used only when the INET socket is in a
* connected state (so that the intended recipient is known).
*
* Input Parameters:
* psock An instance of the internal socket structure.
* buf Data to send
* len Length of data to send
* flags Send flags
*
* Returned Value:
* On success, returns the number of characters sent. On error,
* a negated errno value is returned. See sendfile() for a list
* appropriate error return values.
*
****************************************************************************/
ssize_t tcp_sendfile(FAR struct socket *psock, FAR struct file *infile,
FAR off_t *offset, size_t count)
{
FAR struct tcp_conn_s *conn;
struct sendfile_s state;
off_t startpos;
int ret;
/* If this is an un-connected socket, then return ENOTCONN */
if (psock->s_type != SOCK_STREAM || !_SS_ISCONNECTED(psock->s_flags))
{
nerr("ERROR: Not connected\n");
return -ENOTCONN;
}
/* Make sure that we have the IP address mapping */
conn = (FAR struct tcp_conn_s *)psock->s_conn;
DEBUGASSERT(conn != NULL);
#if defined(CONFIG_NET_ARP_SEND) || defined(CONFIG_NET_ICMPv6_NEIGHBOR)
#ifdef CONFIG_NET_ARP_SEND
#ifdef CONFIG_NET_ICMPv6_NEIGHBOR
if (psock->s_domain == PF_INET)
#endif
{
/* Make sure that the IP address mapping is in the ARP table */
ret = arp_send(conn->u.ipv4.raddr);
}
#endif /* CONFIG_NET_ARP_SEND */
#ifdef CONFIG_NET_ICMPv6_NEIGHBOR
#ifdef CONFIG_NET_ARP_SEND
else
#endif
{
/* Make sure that the IP address mapping is in the Neighbor Table */
ret = icmpv6_neighbor(conn->u.ipv6.raddr);
}
#endif /* CONFIG_NET_ICMPv6_NEIGHBOR */
/* Did we successfully get the address mapping? */
if (ret < 0)
{
nerr("ERROR: Not reachable\n");
return -ENETUNREACH;
}
#endif /* CONFIG_NET_ARP_SEND || CONFIG_NET_ICMPv6_NEIGHBOR */
/* Get the current file position. */
startpos = file_seek(infile, 0, SEEK_CUR);
if (startpos < 0)
{
return startpos;
}
/* Initialize the state structure. This is done with the network
* locked because we don't want anything to happen until we are
* ready.
*/
net_lock();
memset(&state, 0, sizeof(struct sendfile_s));
/* This semaphore is used for signaling and, hence, should not have
* priority inheritance enabled.
*/
nxsem_init(&state.snd_sem, 0, 0); /* Doesn't really fail */
nxsem_set_protocol(&state.snd_sem, SEM_PRIO_NONE);
state.snd_sock = psock; /* Socket descriptor to use */
state.snd_foffset = offset ? *offset : startpos; /* Input file offset */
state.snd_flen = count; /* Number of bytes to send */
state.snd_file = infile; /* File to read from */
/* Allocate resources to receive a callback */
state.snd_datacb = tcp_callback_alloc(conn);
if (state.snd_datacb == NULL)
{
nerr("ERROR: Failed to allocate data callback\n");
ret = -ENOMEM;
goto errout_locked;
}
state.snd_ackcb = tcp_callback_alloc(conn);
if (state.snd_ackcb == NULL)
{
nerr("ERROR: Failed to allocate ack callback\n");
ret = -ENOMEM;
goto errout_datacb;
}
/* Get the initial sequence number that will be used */
state.snd_isn = tcp_getsequence(conn->sndseq);
/* There is no outstanding, unacknowledged data after this
* initial sequence number.
*/
conn->tx_unacked = 0;
/* Set up the ACK callback in the connection */
state.snd_ackcb->flags = (TCP_ACKDATA | TCP_REXMIT | TCP_DISCONN_EVENTS);
state.snd_ackcb->priv = (FAR void *)&state;
state.snd_ackcb->event = ack_eventhandler;
/* Perform the TCP send operation */
state.snd_datacb->flags = TCP_POLL;
state.snd_datacb->priv = (FAR void *)&state;
state.snd_datacb->event = sendfile_eventhandler;
/* Notify the device driver of the availability of TX data */
sendfile_txnotify(psock, conn);
for (; ; )
{
uint32_t acked = state.snd_acked;
ret = net_timedwait_uninterruptible(&state.snd_sem,
_SO_TIMEOUT(psock->s_sndtimeo));
if (ret != -ETIMEDOUT || acked == state.snd_acked)
{
break; /* Timeout without any progress */
}
}
tcp_callback_free(conn, state.snd_ackcb);
errout_datacb:
tcp_callback_free(conn, state.snd_datacb);
errout_locked:
nxsem_destroy(&state.snd_sem);
net_unlock();
/* Return the current file position */
if (offset)
{
/* Use lseek to get the current file position */
off_t curpos = file_seek(infile, 0, SEEK_CUR);
if (curpos < 0)
{
return curpos;
}
/* Return the current file position */
*offset = curpos;
/* Use lseek again to restore the original file position */
startpos = file_seek(infile, startpos, SEEK_SET);
if (startpos < 0)
{
return startpos;
}
}
if (ret < 0)
{
return ret;
}
else
{
return state.snd_sent;
}
}
#endif /* CONFIG_NET_SENDFILE && CONFIG_NET_TCP && NET_TCP_HAVE_STACK */
Reference in New Issue View Git Blame Copy Permalink