nuttx/configs/clicker2-stm32/src/stm32_bringup.c

/****************************************************************************
 * config/clicker2-stm32/src/stm32_bringup.c
 *
 *   Copyright (C) 2017 Gregory Nutt. All rights reserved.
 *   Author: Gregory Nutt <gnutt@nuttx.org>
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in
 *    the documentation and/or other materials provided with the
 *    distribution.
 * 3. Neither the name NuttX nor the names of its contributors may be
 *    used to endorse or promote products derived from this software
 *    without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
 * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
 * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
 * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
 * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 *
 ****************************************************************************/

/****************************************************************************
 * Included Files
 ****************************************************************************/

#include <nuttx/config.h>

#include <sys/mount.h>
#include <stdbool.h>
#include <stdio.h>
#include <syslog.h>
#include <errno.h>

#include <nuttx/board.h>
#include <nuttx/mmcsd.h>
#include <nuttx/input/buttons.h>

#ifdef CONFIG_USBMONITOR
#  include <nuttx/usb/usbmonitor.h>
#endif

#include "stm32.h"
#include "clicker2-stm32.h"

/****************************************************************************
 * Public Functions
 ****************************************************************************/

/****************************************************************************
 * Name: stm32_bringup
 *
 * Description:
 *   Perform architecture-specific initialization
 *
 *   CONFIG_BOARD_INITIALIZE=y :
 *     Called from board_initialize().
 *
 *   CONFIG_BOARD_INITIALIZE=n && CONFIG_LIB_BOARDCTL=y :
 *     Called from the NSH library
 *
 ****************************************************************************/

int stm32_bringup(void)
{
#ifdef HAVE_MMCSD
  FAR struct sdio_dev_s *sdio;
#endif
  int ret;

#ifdef CONFIG_FS_PROCFS
  /* Mount the procfs file system */

  ret = mount(NULL, "/proc", "procfs", 0, NULL);
  if (ret < 0)
    {
      syslog(LOG_ERR, "ERROR: Failed to mount procfs at /proc: %d\n", ret);
    }
#endif

#ifdef HAVE_MMCSD
  /* Mount the SDIO-based MMC/SD block driver */
  /* First, get an instance of the SDIO interface */

  sdio = sdio_initialize(MMCSD_SLOTNO);
  if (!sdio)
    {
      syslog(LOG_ERR,
             "ERROR: Failed to initialize SDIO slot %d\n",
             MMCSD_SLOTNO);
      return -ENODEV;
    }

  /* Now bind the SDIO interface to the MMC/SD driver */

  ret = mmcsd_slotinitialize(MMCSD_MINOR, sdio);
  if (ret != OK)
    {
      syslog(LOG_ERR,
             "ERROR: Failed to bind SDIO to the MMC/SD driver: %d\n",
             ret);
      return ret;
    }

  /* Then let's guess and say that there is a card in the slot.  The Olimex
   * STM32 P407 does not support a GPIO to detect if there is a card in
   * the slot so we are reduced to guessing.
   */

   sdio_mediachange(sdio, true);
#endif

#ifdef CONFIG_CAN
  /* Initialize CAN and register the CAN driver. */

  ret = stm32_can_setup();
  if (ret < 0)
    {
      syslog(LOG_ERR, "ERROR: stm32_can_setup failed: %d\n", ret);
    }
#endif

#ifdef CONFIG_ADC
  /* Initialize ADC and register the ADC driver. */

  ret = stm32_adc_setup();
  if (ret < 0)
    {
      syslog(LOG_ERR, "ERROR: stm32_adc_setup failed: %d\n", ret);
    }
#endif

#ifdef HAVE_USBMONITOR
  /* Start the USB Monitor */

  ret = usbmonitor_start();
  if (ret != OK)
    {
      syslog(LOG_ERR, "ERROR: Failed to start USB monitor: %d\n", ret);
    }
#endif

#ifdef CONFIG_BUTTONS
  /* Register the BUTTON driver */

  ret = btn_lower_initialize("/dev/buttons");
  if (ret < 0)
    {
      syslog(LOG_ERR, "ERROR: btn_lower_initialize() failed: %d\n", ret);
    }
#endif

  UNUSED(ret);
  return OK;
}