sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
a7fbf7c5cf
nuttx/boards/Kconfig
chao an 996b9377a7 arch/tricore: add Infineon AURIX TriCore support 
Add support for tricore TC397

1. Porting based on AURIX TC397 KIT_A2G_TC397_5V_TFT evaluation board

   https://www.infineon.com/cms/en/product/evaluation-boards/kit_a2g_tc397_5v_tft/

2. In order to avoid license and coding style issues, The chip-level code
   still uses the implementation of AURIX Development Studio SDK.
   The SDK package will be downloaded as a third-party package during compilation:

   https://github.com/anchao/tc397_sdk

3. Single core only, SMP implementation will be provided in the future.
4. Implemented the basic System Timer, ASCLIN UART driver.
5. Only the Tasking tool chain is supported (ctc/ltc, license maybe required)
6. 'ostest' can be completed on the TC397 development board.

How to run?

1. Setup the tasking toolchain and license

$ export TSK_LICENSE_KEY_SW160800=d22f-7473-ff5d-1b70
$ export TSK_LICENSE_SERVER=192.168.36.12:9090

2. Build nuttx ELF

$ ./tools/configure.sh tc397/nsh
$ make -j
...
artc I800: creating archive libc_fpu.a
LD: nuttx

3. Switch to windows PC, setup AURIX-studio to Debugger Launcher

4. Replace runing ELF to nuttx, and re-download ELF

Signed-off-by: chao an <anchao@lixiang.com>
2024-02-21 21:39:19 -08:00

4668 lines
153 KiB
Plaintext
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

#
# For a description of the syntax of this configuration file,
# see the file kconfig-language.txt in the NuttX tools repository.
#
choice
prompt "Select target board"
default ARCH_BOARD_CUSTOM
---help---
Select the board hosting the architecture. You must first select the
exact MCU part number, then the boards supporting that part will
be available for selection. Use ARCH_BOARD_CUSTOM to create a new
board configuration.
config ARCH_BOARD_AMBER
bool "Amber Web Server"
depends on ARCH_CHIP_ATMEGA128
---help---
This is placeholder for the SoC Robotics Amber Web Server that is based
on the Atmel AVR ATMega128 MCU. There is not much there yet and what is
there is untested due to tool-related issues.
config ARCH_BOARD_ARDUINO_MEGA2560
bool "Arduino Mega 2560"
depends on ARCH_CHIP_ATMEGA2560
---help---
This option selects the Arduino Mega 2560 board featuring the Atmel
Atmega2560 MCU running at 16 MHz.
config ARCH_BOARD_ARDUINO_DUE
bool "Arduino Due"
depends on ARCH_CHIP_ATSAM3X8E
select ARCH_HAVE_LEDS
---help---
This options selects the Arduino DUE board featuring the Atmel
ATSAM3X8E MCU running at 84 MHz.
config ARCH_BOARD_ARDUINO_M0
bool "Arduino M0"
depends on ARCH_CHIP_SAMD21G18A
select ARCH_HAVE_LEDS
---help---
This options selects the Arduino M0 board featuring the Atmel
ATSAMD21 MCU.
config ARCH_BOARD_ARTY_A7
bool "DIGILENT ARTY_A7 board"
depends on ARCH_CHIP_LITEX
---help---
This is the board configuration for the port of NuttX to the Digilent ARTY A7
board. This board features the RISC-V litex vexriscv softcore
config ARCH_BOARD_AVR32DEV1
bool "Atmel AVR32DEV1 board"
depends on ARCH_CHIP_AT32UC3B0256
select ARCH_HAVE_LEDS
# select ARCH_HAVE_BUTTONS
# select ARCH_HAVE_IRQBUTTONS
---help---
This is a port of NuttX to the Atmel AVR32DEV1 board. That board is
based on the Atmel AT32UC3B0256 MCU and uses a specially patched
version of the GNU toolchain: The patches provide support for the
AVR32 family. That patched GNU toolchain is available only from the
Atmel website. STATUS: This port is functional but very basic. There
are configurations for NSH and the OS test.
config ARCH_BOARD_AXOLOTI
bool "Axoloti board"
depends on ARCH_CHIP_STM32F427I
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
Axoloti synthesizer board based on the STMicro STM32F427IGH6 MCU.
See: http://www.axoloti.com/
config ARCH_BOARD_BL602EVB
bool "BouffaloLab BL602EVB Board"
depends on ARCH_CHIP_BL602
---help---
This is the board configuration for the port of NuttX to the BouffaloLab BL602EVB
board. This board features the RISC-V rv32imfc core
config ARCH_BOARD_C5471EVM
bool "Spectrum Digital C5471 evaluation board"
depends on ARCH_CHIP_C5471
select ARCH_HAVE_LEDS
---help---
This is a port to the Spectrum Digital C5471 evaluation board. The
TMS320C5471 is a dual core processor from TI with an ARM7TDMI general
purpose processor and a c54 DSP. It is also known as TMS320DA180 or just DA180.
NuttX runs on the ARM core and is built with a GNU arm-nuttx-elf toolchain*.
This port is complete and verified.
config ARCH_BOARD_CIRCUIT_EXPRESS
bool "Adafruit Circuit Express"
depends on ARCH_CHIP_SAMD21G18A
select ARCH_HAVE_LEDS
---help---
This options selects the Adafruit Circuit Express board featuring the Atmel
ATSAMD21 MCU.
config ARCH_BOARD_CLICKER2_STM32
bool "Mikroe Clicker2 STM32"
depends on ARCH_CHIP_STM32F407VG
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
Mikroe Clicker2 STM32 board based on the STMicro STM32F407VGT6 MCU.
config ARCH_BOARD_CLOUDCTRL
bool "Darcy's CloudController stm32f10x board"
depends on ARCH_CHIP_STM32F107VC
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
Small network relay development board. Based on the Shenzhou IV development
board design.
config ARCH_BOARD_DEMOS92S12NEC64
bool "NXP/FreeScale DMO9S12NE64 board"
depends on ARCH_CHIP_MCS92S12NEC64
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
---help---
NXP/FreeScale DMO9S12NE64 board based on the MC9S12NE64 hcs12 cpu. This
port uses the m9s12x GCC toolchain. STATUS: (Still) under development; it
is code complete but has not yet been verified.
config ARCH_BOARD_DK_TM4C129X
bool "Tiva DK-TM4C129x Connected Development Kit"
depends on ARCH_CHIP_TM4C129XNCZAD
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
Tiva DK-TM4C129x Connected Development Kit featuring the
TM4C129XNCZAD MCU.
config ARCH_BOARD_EA3131
bool "Embedded Artists EA3131 Development board"
depends on ARCH_CHIP_LPC3131
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
---help---
Embedded Artists EA3131 Development board. This board is based on the
an NXP LPC3131 MCU. This OS is built with the arm-nuttx-elf toolchain*.
STATUS: This port is complete and mature.
config ARCH_BOARD_EA3152
bool "Embedded Artists EA3152 Development board"
depends on ARCH_CHIP_LPC3152
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
---help---
Embedded Artists EA3152 Development board. This board is based on the
an NXP LPC3152 MCU. This OS is built with the arm-nuttx-elf toolchain*.
STATUS: This port is has not be exercised well, but since it is
a simple derivative of the ea3131, it should be fully functional.
config ARCH_BOARD_EAGLE100
bool "Micromint Eagle-100 Development board"
depends on ARCH_CHIP_LM3S6918
select ARCH_HAVE_LEDS
---help---
Micromint Eagle-100 Development board. This board is based on the
an ARM Cortex-M3 MCU, the Luminary LM3S6918. This OS is built with the
arm-nuttx-elf toolchain*. STATUS: This port is complete and mature.
config ARCH_BOARD_EFM32G8XXSTK
bool "EFM32 Gecko Starter Kit"
depends on ARCH_CHIP_EFM32G890F128
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
---help---
This option selects the EFM32 Gecko Starter Kit (EFM32-G8XX-STK).
config ARCH_BOARD_EFM32GG_STK3700
bool "EFM32 Giant Gecko Starter Kit"
depends on ARCH_CHIP_EFM32GG990F1024
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
---help---
This option selects the EFM32 Giant Gecko Starter Kit (EFM32GG-STK3700).
config ARCH_BOARD_EKKLM3S9B96
bool "TI/Stellaris EKK-LM3S9B96"
depends on ARCH_CHIP_LM3S9B96
select ARCH_HAVE_LEDS
---help---
TI/Stellaris EKK-LM3S9B96 board. This board is based on the
an EKK-LM3S9B96 which is a Cortex-M3.
config ARCH_BOARD_EMW3162
bool "EMW3162 Wi-Fi board"
depends on ARCH_CHIP_STM32F205RG
select ARCH_HAVE_LEDS
---help---
EMW3162 board (https://www.waveshare.com/wiki/EMW3162). This board
features the STM32F205RGY6 MCU and BCM43362KUBG Wi-Fi chip.
config ARCH_BOARD_QUICKFEATHER
bool "EOS S3 QuickFeather"
depends on ARCH_CHIP_EOSS3
select ARCH_HAVE_LEDS
---help---
QuickLogic EOS S3 QuickFeather board. This is the feather form factor
low cost development board. This includes 16-Mbit external flash,
MC3635 accelerometer, DPS310 pressure sensor, IM69D130 PDM microphone,
internal programmable FPGA fabric.
config ARCH_BOARD_ESP32_AUDIO_KIT
bool "Ai-Thinker ESP32 Audio Kit"
depends on ARCH_CHIP_ESP32_A1S
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS if ESP32_GPIO_IRQ
---help---
The Ai-Thinker ESP32-Audio-Kit is a board with the ESP32-A1S module
powered by ESP32-D0WD-V3 with 16MB of SPI Flash and 8MB PSRAM, and an
audio codec on it. There are two versions of ESP32-A1S module: ES8388
codec and other with AC101. Currently only ES8388 is supported.
config ARCH_BOARD_ESP32_DEVKITC
bool "Espressif ESP32 DevkitC board V4"
depends on ARCH_CHIP_ESP32WROOM32 || ARCH_CHIP_ESP32WROOM32_8MB || ARCH_CHIP_ESP32WROOM32_16MB || ARCH_CHIP_ESP32WROVER || ARCH_CHIP_ESP32SOLO1
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS if ESP32_GPIO_IRQ
---help---
The ESP32 is a dual-core system from Espressif with two Harvard
architecture Xtensa LX6 CPUs. All embedded memory, external memory
and peripherals are located on the data bus and/or the instruction
bus of these CPUs. With some minor exceptions, the address mapping
of two CPUs is symmetric, meaning they use the same addresses to
access the same memory.
config ARCH_BOARD_TLSR8278ADK80D
bool "Telink tlsr8278adk80d board"
depends on ARCH_CHIP_TLSR82
---help---
Enable support for Telink tlsr8278adk80d board.
config ARCH_BOARD_ESP32_ETHERNETKIT
bool "Espressif ESP32 Ethernet Kit"
depends on ARCH_CHIP_ESP32WROVER
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS if ESP32_GPIO_IRQ
---help---
The ESP32-Ethernet-Kit is an Ethernet-to-Wi-Fi development board that enables
Ethernet devices to be interconnected over Wi-Fi. At the same time, to provide
more flexible power supply options, the ESP32-Ethernet-Kit also supports power
over Ethernet (PoE).
config ARCH_BOARD_ESP32_LYRAT
bool "Espressif ESP32-LyraT"
depends on ARCH_CHIP_ESP32WROVER
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS if ESP32_GPIO_IRQ
---help---
ESP32-LyraT is an open-source development board for Espressif Systems' Audio
Development Framework (ADF). It is designed for smart speakers and smart-home
applications. This port is for board version 4.3.
config ARCH_BOARD_ESP32_PICO_KIT
bool "Espressif ESP32-PICO-KIT V4"
depends on ARCH_CHIP_ESP32PICOD4
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS if ESP32_GPIO_IRQ
---help---
ESP32-PICO-KIT is an ESP32-based mini development board produced by Espressif.
The core of this board is ESP32-PICO-D4, a System-in-Package module with complete
Wi-Fi and Bluetooth functionalities. Compared to other ESP32 modules, ESP32-PICO-D4
integrates the following peripheral components in one single package, which otherwise
would need to be installed separately: Crystal Oscillator, Flash Memory, Filter Capacitors
and RF matching links.
config ARCH_BOARD_ESP32_SPARROWKIT
bool "Espressif ESP-SPARROW-KIT"
depends on ARCH_CHIP_ESP32WROVER
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS if ESP32_GPIO_IRQ
---help---
ESP32-SPARROW-KIT is a custom-made board based on Espressif's ESP32WROVER chip
and built upon the ESP32-WROVERKIT board. It is designed for a university
course and its purpose is to allow the user to enable support by default for
various peripherals which have been soldered into the board:
LTR308 ambient light sensor
BME680 sensor
MicroSD card slot
SSD1306 OLED display
I2S microphone
config ARCH_BOARD_ESP32_WROVERKIT
bool "Espressif ESP-WROVER-KIT"
depends on ARCH_CHIP_ESP32WROVER
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS if ESP32_GPIO_IRQ
---help---
ESP-WROVER-KIT is an ESP32-based development board produced by Espressif.
ESP-WROVER-KIT features the following integrated components:
ESP32-WROVER-B module
LCD screen
MicroSD card slot
config ARCH_BOARD_ESP32_2432S028
bool "ESP32-2432S028"
depends on ARCH_CHIP_ESP32WROVER
---help---
ESP32-2432S028 is an ESP32 board with LCD Display, LED RGB and SD Cards.
config ARCH_BOARD_LILYGO_TBEAM_LORA_GPS
bool "LilyGO TBeam V1.1 LoRa/GPS"
depends on ARCH_CHIP_ESP32WROOM32
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS if ESP32_GPIO_IRQ
---help---
LilyGO_TBeam_V1.1 LoRa/GPS is an ESP32 board with LoRa and GPS.
More info: https://github.com/Xinyuan-LilyGO/LilyGo-LoRa-Series/
config ARCH_BOARD_TTGO_LORA_ESP32
bool "TTGO LoRa SX1276 ESP32"
depends on ARCH_CHIP_ESP32WROOM32
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS if ESP32_GPIO_IRQ
---help---
TTGO-LoRa-SX1276-ESP32 is an ESP32 board with LoRa. Usually it
comes with an OLED display, but there are options without
display. This port is for board version 1.0, more info:
https://github.com/Xinyuan-LilyGO/TTGO-LoRa-Series
config ARCH_BOARD_TTGO_T5V2_ESP32
bool "TTGO e-ink T5v2.2"
depends on ARCH_CHIP_ESP32WROOM32 || ARCH_CHIP_ESP32WROOM32_8MB || ARCH_CHIP_ESP32WROOM32_16MB || ARCH_CHIP_ESP32WROVER || ARCH_CHIP_ESP32SOLO1
select ARCH_HAVE_BUTTONS
select DRIVERS_VIDEO
select VIDEO_FB
select FB_MODULEINFO
select LCD
select LCD_DEV
select LCD_FRAMEBUFFER
select LCD_SSD1680
---help---
TTGO T5v2 is an ESP32 board with e-ink 2.9 inch display.
Display resolution 128/296. More info:
https://github.com/Xinyuan-LilyGO/LilyGo-T5-Epaper-Series
config ARCH_BOARD_TTGO_T_DISPLAY_ESP32
bool "TTGO T-Display ESP32 v1.1"
depends on ARCH_CHIP_ESP32WROOM32 || ARCH_CHIP_ESP32WROOM32_8MB || ARCH_CHIP_ESP32WROOM32_16MB || ARCH_CHIP_ESP32WROVER || ARCH_CHIP_ESP32SOLO1
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS if ESP32_GPIO_IRQ
---help---
TTGO-T-DISPLAY-ESP32 is an ESP32 with a TFT Display.
This port is for board version 1.1, more info:
https://github.com/Xinyuan-LilyGO/TTGO-T-Display
config ARCH_BOARD_ESP32C3_DEVKIT
bool "Espressif ESP32-C3 DevKit"
depends on ARCH_CHIP_ESP32C3MINI1 || ARCH_CHIP_ESP32C3WROOM02
---help---
The ESP32-C3 DevKit features the ESP32-C3 CPU with a RISC-V core.
It comes in two flavors, the ESP32-C3-DevKitM-1 and the ESP32-C3-DevKitC-02.
The ESP32-C3-DevKitM-1 version contains the ESP32-C3-MINI-1 module and the
ESP32-C3-DevKitC-02 version the ESP32-C3-WROOM-02.
config ARCH_BOARD_ESP32C3_DEVKIT_RUST1
bool "Espressif ESP32-C3-RUST-1 board"
depends on ARCH_CHIP_ESP32C3MINI1
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
---help---
The ESP32-C3-DevKit-RUST-1 features the ESP32-C3 CPU with a RISC-V core.
This board includes the ESP32-C3-MINI-1 module, a 6DoF IMU, a temperature
and humidity sensor, a Li-Ion battery charger, and a Type-C USB.
config ARCH_BOARD_ESP32C3_GENERIC
bool "Espressif ESP32-C3 Generic DevKit"
depends on ESPRESSIF_ESP32C3
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
The ESP32-C3 DevKit features the ESP32-C3 CPU with a RISC-V core.
It comes in two flavors, the ESP32-C3-DevKitM-1 and the ESP32-C3-DevKitC-02.
The ESP32-C3-DevKitM-1 version contains the ESP32-C3-MINI-1 module and the
ESP32-C3-DevKitC-02 version the ESP32-C3-WROOM-02.
config ARCH_BOARD_ESP32S2_KALUGA_1
bool "Espressif ESP32-S2-Kaluga-1 V1.3"
depends on ARCH_CHIP_ESP32S2WROVER
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS if ESP32S2_GPIO_IRQ
---help---
This is the ESP32-S2-Kaluga-1 board
config ARCH_BOARD_ESP32S2_SAOLA_1
bool "Espressif ESP32-S2-Saola-1 V1.2"
depends on ARCH_CHIP_ESP32S2WROVER
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS if ESP32S2_GPIO_IRQ
---help---
This is the ESP32-S2-Saola-1 board
config ARCH_BOARD_FRANZININHO_WIFI
bool "FRANZININHO WI-FI"
depends on ARCH_CHIP_ESP32S2WROVER
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS if ESP32S2_GPIO_IRQ
---help---
Franzininho Wi-Fi is a development board to evaluate the ESP32-S2 SoC
config ARCH_BOARD_ESP32S3_DEVKIT
bool "Espressif ESP32-S3 DevKit"
depends on ARCH_CHIP_ESP32S3WROOM1 || ARCH_CHIP_ESP32S3MINI1 || ARCH_CHIP_ESP32S3WROOM2
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS if ESP32S3_GPIO_IRQ
---help---
The ESP32-S3 DevKit features the ESP32-S3 CPU with dual Xtensa LX7 cores.
It comes in two flavors, the ESP32-S3-DevKitM-1 and the ESP32-S3-DevKitC-1.
The ESP32-C3-DevKitM-1 version contains the ESP32-S3-MINI-1/1U module and the
ESP32-S3-DevKitC-1 version may be based either on ESP32-S3-WROOM-1/1U or
ESP32-S3-WROOM-2/2U.
config ARCH_BOARD_ESP32S3_EYE
bool "Espressif ESP32-S3-EYE Board"
depends on ARCH_CHIP_ESP32S3WROOM1
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS if ESP32S3_GPIO_IRQ
---help---
The ESP32-S3-EYE is a small-sized AI development board produced by Espressif
featuring the ESP32-S3 CPU with a 2-Megapixel camera, an LCD display,
a microphone, an 8 MB Octal PSRAM and an 8 MB flash.
config ARCH_BOARD_ESP32S3_LCD_EV
bool "Espressif ESP32-S3-LCD-EV Board"
depends on ARCH_CHIP_ESP32S3WROOM2
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS if ESP32S3_GPIO_IRQ
---help---
ESP32-S3-LCD-EV is an ESP32-S3-based development board with a touchscreen.
Together with different subboards, ESP32-S3-LCD-EV-Board can drive LCDs with IIC,
SPI, 8080, and RGB interfaces.
It houses dual array microphones, supports voice recognition and near/far-field
voice wake-up, and features screen and voice interaction.
The board caters to development needs for touchscreen products with different resolutions
and interfaces. Currently, we have two boards available:
1. ESP32-S3-LCD-EV-Board with 480x480 LCD
2. ESP32-S3-LCD-EV-Board with 800x480 LCD
config ARCH_BOARD_ESP32S3_BOX
bool "Espressif ESP32-S3-BOX"
depends on ARCH_CHIP_ESP32S3WROOM2
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS if ESP32S3_GPIO_IRQ
---help---
The ESP-BOX is an advanced AIoT, Edge AI, and IIoT applications development platform
released by Espressif Systems. The board is built on Espressif’s powerful ESP32-S3
Wi-Fi + Bluetooth 5 (LE) SoC and feature compact and beautiful enclosures.
Leveraging the multi-functional accessories and reliable examples from the repo’s,
these development boards cater to both prototyping new projects and building complex
IoT systems, providing a perfect balance of form and function.
config ARCH_BOARD_ESP32S3_MEADOW
bool "WildernessLabs ESP32S3-Meadow Board"
depends on ARCH_CHIP_ESP32S3WROOM1
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS if ESP32S3_GPIO_IRQ
---help---
The ESP32-S3-Meadow is a small-sized board produced by WildernessLabs
featuring the ESP32-S3 CPU with 32MiB Octal SPI PSRAM and 64 MiB flash.
config ARCH_BOARD_ESP32C6_DEVKIT
bool "Espressif ESP32-C6 Generic DevKit"
depends on ESPRESSIF_ESP32C6
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
The ESP32-C6 DevKit features the ESP32-C6 CPU with a RISC-V core.
config ARCH_BOARD_ESP32H2_DEVKIT
bool "Espressif ESP32-H2 Generic DevKit"
depends on ESPRESSIF_ESP32H2
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
The ESP32-H2 DevKit features the ESP32-H2 CPU with a RISC-V core.
config ARCH_BOARD_ET_STM32_STAMP
bool "Futurlec: ET-STM32 Stamp"
depends on ARCH_CHIP_STM32F103RE
---help---
The ET-STM32 Stamp features the STM32F103RET6 (Cortex M3) microcontroller.
For board details, see: https://www.futurlec.com/ET-STM32_Stamp.shtml
config ARCH_BOARD_EZ80F910200KITG
bool "ZiLOG ez80f910200kitg development kit"
depends on ARCH_CHIP_EZ80F91
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
---help---
ez80Acclaim! Microcontroller. This port use the Zilog ez80f910200kitg
development kit, eZ80F091 part, and the Zilog ZDS-II Windows command line
tools. The development environment is Cygwin under WinXP.
config ARCH_BOARD_EZ80F910200ZCO
bool "ZiLOG ez80f910200zco development kit"
depends on ARCH_CHIP_EZ80F91
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
---help---
ez80Acclaim! Microcontroller. This port use the Zilog ez80f910200zco
development kit, eZ80F091 part, and the Zilog ZDS-II Windows command line
tools. The development environment is Cygwin under WinXP.
config ARCH_BOARD_FIRE_STM32
bool "M3 Wildfire STM32 board"
depends on ARCH_CHIP_STM32F103VE
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
Support for the M3 Wildfire STM32 board. This board is based on the
STM32F103VET6 chip. See http://firestm32.taobao.com . Version 2
and 3 of the boards are supported but only version 2 has been
tested.
config ARCH_BOARD_CHIPKIT_WIFIRE
bool "chipKIT Wi-FIRE"
depends on ARCH_CHIP_PIC32MZ2048EFG
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
This options selects the chipKIT Wi-FIRE board. This
board is a chipKIT Arduino-compatible board. This board
features the Microchip PIC32MZ2048EFG100 MCU running at 200 MHz.
config ARCH_BOARD_FLIPNCLICK_PIC32MZ
bool "Mikroe Flip&Click PIC32MZ"
depends on ARCH_CHIP_PIC32MZ2048EFH
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
This options selects the Mikroe Flip&Click PIC32MZ board. This
board is an chipKit Arduino-compatible board (but can also be used
with the Mikroe bootloader). It has with four Mikroe Click bus
interfaces in addition to standard Arduino connectors. This board
features the Microchip PIC32MZ2048EFH100 MCU running at 200 MHz
(252Mhz capable).
config ARCH_BOARD_FLIPNCLICK_SAM3X
bool "Mikroe Flip&Click SAM3X"
depends on ARCH_CHIP_ATSAM3X8E
select ARCH_HAVE_LEDS
---help---
This options selects the Mikroe Flip&Click STM32X board. This board
is an Arduino-Due work-alike with four Mikroe Click bus interfaces.
Like the Arduino DUE, this board features the Atmel ATSAM3X8E MCU
running at 84 MHz.
config ARCH_BOARD_FREEDOM_K28F
bool "NXP Freedom-k28f development board"
depends on ARCH_CHIP_MK28FN2M0VMI15
select ARCH_HAVE_LEDS if !RGBLED
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
select KINETIS_SDHC_PULLUP if KINETIS_SDHC # REVISIT
---help---
development board.
This port uses the NXP/FreeScale FREEDOM-K28F development board. This
board uses the Kinetis K28F MK28FN2M0VMI15 Cortex-M4 MCU.
config ARCH_BOARD_FREEDOM_K64F
bool "NXP Freedom-k64f development board"
depends on ARCH_CHIP_MK64FN1M0VLL12
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
select KINETIS_SDHC_PULLUP if KINETIS_SDHC
---help---
development board.
This port uses the NXP/FreeScale FREEDOM-K64F development board. This
board uses the Kinetis K64 MK64FN1M0VLL12 Cortex-M4 MCU.
config ARCH_BOARD_FREEDOM_K66F
bool "NXP Freedom-k66f development board"
depends on ARCH_CHIP_MK66FN2M0VMD18
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
select KINETIS_SDHC_PULLUP if KINETIS_SDHC
---help---
development board.
This port uses the NXP/FreeScale FREEDOM-K66F development board. This
board uses the Kinetis K66 MK66FN2M0VMD18 Cortex-M4 MCU.
config ARCH_BOARD_FREEDOM_KL25Z
bool "NXP/FreeScale Freedom KL25Z"
depends on ARCH_CHIP_MKL25Z128
select ARCH_HAVE_LEDS
---help---
This is the configuration for the NXP/FreeScale Freedom KL25Z board. This
board has the K25Z120LE3AN chip with a built-in SDA debugger.
config ARCH_BOARD_FREEDOM_KL26Z
bool "NXP/FreeScale Freedom KL26Z"
depends on ARCH_CHIP_MKL26Z128
select ARCH_HAVE_LEDS
---help---
This is the configuration for the NXP/FreeScale Freedom KL26Z board. This
board has the K26Z128VLH4 chip with a built-in SDA debugger.
config ARCH_BOARD_GD32F450ZK_EVAL
bool "GD32 MCU GD32F450ZK"
depends on ARCH_CHIP_GD32F450ZK
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
GD32 MCU GD32F450ZK-EVAL board based on the GD32F4 GD32F450ZKT6 MCU.
config ARCH_BOARD_GD32F470ZK_EVAL
bool "GD32 MCU GD32F470ZK"
depends on ARCH_CHIP_GD32F470ZK
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
GD32 MCU GD32F470ZK-EVAL board based on the GD32F4 GD32F470ZKT6 MCU.
config ARCH_BOARD_GD32F470IK_EVAL
bool "GD32 MCU GD32F470IK"
depends on ARCH_CHIP_GD32F470IK
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
GD32 MCU GD32F470IK-EVAL board based on the GD32F4 GD32F470IKT6 MCU.
config ARCH_BOARD_HIFIVE1_REVB
bool "HiFive1 Rev B board"
depends on ARCH_CHIP_FE310
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
This is the board configuration for the port of NuttX to the SiFive HiFive1
Rev B board. This board features the RISC-V FE310-G002
config ARCH_BOARD_HYMINI_STM32V
bool "HY-Mini STM32v board"
depends on ARCH_CHIP_STM32F103VC
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
A configuration for the HY-Mini STM32v board. This board is based on the
STM32F103VCT6 chip.
config ARCH_BOARD_IMXRT1020_EVK
bool "NXP i.MX RT 1020 EVK"
depends on ARCH_CHIP_MIMXRT1021DAG5A
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
select ARCH_PHY_INTERRUPT
---help---
This is the board configuration for the port of NuttX to the NXP i.MXRT
evaluation kit, MIMXRT1020-EVKB. This board features the MIMXRT1021DAG5A MCU.
config ARCH_BOARD_IMXRT1050_EVK
bool "NXP i.MX RT 1050 EVK"
depends on ARCH_CHIP_MIMXRT1052DVL6A
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
select ARCH_PHY_INTERRUPT
---help---
This is the board configuration for the port of NuttX to the NXP i.MXRT
evaluation kit, MIMXRT1050-EVKB. This board features the MIMXRT1052DVL6A MCU.
config ARCH_BOARD_IMXRT1060_EVK
bool "NXP i.MX RT 1060 EVK"
depends on ARCH_CHIP_MIMXRT1062DVL6A
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
select ARCH_PHY_INTERRUPT
---help---
This is the board configuration for the port of NuttX to the NXP i.MXRT
evaluation kit, MIMXRT1060-EVK. This board features the MIMXRT1062DVL6A MCU.
config ARCH_BOARD_IMXRT1064_EVK
bool "NXP i.MX RT 1064 EVK"
depends on ARCH_CHIP_MIMXRT1064DVL6A
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
select ARCH_PHY_INTERRUPT
---help---
This is the board configuration for the port of NuttX to the NXP i.MXRT
evaluation kit, MIMXRT1064-EVK. This board features the MIMXRT1064DVL6A MCU.
config ARCH_BOARD_IMXRT1170_EVK
bool "NXP i.MX RT 1170 EVK"
depends on ARCH_CHIP_MIMXRT1176DVMAA
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
This is the board configuration for the port of NuttX to the NXP i.MXRT
evaluation kit, MIMXRT1170-EVK. This board features the MIMXRT1176DVMAA MCU.
config ARCH_BOARD_LC823450_XGEVK
bool "ON Semiconductor LC823450-XGEVK development board"
depends on ARCH_CHIP_LC823450
select ARCH_HAVE_LEDS
---help---
This port uses the ON Semiconductor LC823450-XGEVK development board.
config ARCH_BOARD_LINCOLN60
bool "Micromint Lincoln 60 board"
depends on ARCH_CHIP_LPC1769
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
Micromint Lincoln 60 board using the NXP LPC1769 MCU.
config ARCH_BOARD_KWIKSTIK_K40
bool "NXP/FreeScale KwikStik-K40 development board"
depends on ARCH_CHIP_MK40X256VLQ100
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
Kinetis K40 Cortex-M4 MCU. This port uses the NXP/FreeScale KwikStik-K40
development board.
config ARCH_BOARD_LAUNCHXL_CC1310
bool "TI LaunchXL-CC1310"
depends on ARCH_CHIP_CC1310
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
TI SimpleLink CC1310 LaunchPad Evaluation Kit (LAUNCHXL-CC1310)
featuring the SimpleLinkCC1310 chip. This board features the
CC1310F128 part with 128Kb of FLASH and 20Kb of SRAM.
config ARCH_BOARD_LAUNCHXL_CC1312R1
bool "TI LaunchXL-CC1312R1"
depends on ARCH_CHIP_CC1312R1
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
TI SimpleLink CC1312R1 LaunchPad Evaluation Kit (LAUNCHXL-CC1312R1)
featuring the SimpleLinkCC1312R1 chip.
config ARCH_BOARD_LAUNCHXL_TMS57004
bool "TI LaunchXL-TMS57004"
depends on ARCH_CHIP_TMS570LS0432PZ
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
TI Hercules TMS570LS04x/03x LaunchPad Evaluation Kit (LAUNCHXL-
TMS57004) featuring the Hercules TMS570LS0432PZ chip.
config ARCH_BOARD_LM3S6432S2E
bool "Stellaris RDK-S2E Reference Design Kit"
depends on ARCH_CHIP_LM3S6432
select ARCH_HAVE_LEDS
---help---
Stellaris RDK-S2E Reference Design Kit and the MDL-S2E Ethernet to
Serial module.
config ARCH_BOARD_LM3S6965EK
bool "Stellaris LM3S6965 Evaluation Kit"
depends on ARCH_CHIP_LM3S6965
select ARCH_HAVE_LEDS
---help---
Stellaris LM3S6965 Evaluation Kit. This board is based on the
an ARM Cortex-M3 MCU, the Luminary/TI LM3S6965. This OS is built with the
arm-nuttx-elf toolchain*. STATUS: This port is complete and mature.
config ARCH_BOARD_LM3S8962EK
bool "Stellaris LMS38962 Evaluation Kit"
depends on ARCH_CHIP_LM3S8962
select ARCH_HAVE_LEDS
---help---
Stellaris LMS38962 Evaluation Kit.
config ARCH_BOARD_LM4F120_LAUNCHPAD
bool "Stellaris LM4F120 LaunchPad"
depends on ARCH_CHIP_LM4F120
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
Stellaris LM4F120 LaunchPad.
config ARCH_BOARD_LPCXPRESSO
bool "NXP LPCExpresso LPC1768"
depends on ARCH_CHIP_LPC1768
select ARCH_HAVE_LEDS
---help---
Embedded Artists base board with NXP LPCExpresso LPC1768. This board
is based on the NXP LPC1768. The Code Red toolchain is used by default.
config ARCH_BOARD_LPCXPRESSO_LPC54628
bool "NXP LPCXpresso LPC54628"
depends on ARCH_CHIP_LPC54628
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
LPCXpresso LPC54626 board featuring the NXP LPC54628 MCU.
config ARCH_BOARD_BAMBINO_200E
bool "Micromint Bambino 200E"
depends on ARCH_CHIP_LPC4330FBD144
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
Micromint Bambino board. This board is based on the LPC4330FBD144.
config ARCH_BOARD_LPC1766STK
bool "Olimex LPC1766-STK board"
depends on ARCH_CHIP_LPC1766
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
This port uses the Olimex LPC1766-STK board and a GNU GCC toolchain* under
Linux or Cygwin. STATUS: Complete and mature.
config ARCH_BOARD_LPC4088_DEVKIT
bool "LPC4088 Developer's Kit"
depends on ARCH_CHIP_LPC4088
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
Embedded Artists LPC4088 Developer's Kit. See
https://www.embeddedartists.com/products/lpc4088-developers-kit/
for further information. This board uses the NXP LPC4088FET208 MCU.
config ARCH_BOARD_LPC4088_QUICKSTART
bool "LPC4088 QuickStart Board"
depends on ARCH_CHIP_LPC4088
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
Embedded Artists LPC4088 QuickStart Board. See
https://www.embeddedartists.com/products/lpc4088-quickstart-board/
for further information. This board uses the NXP LPC4088FET208 MCU.
config ARCH_BOARD_LPC4330_XPLORER
bool "NXG LPC4330-Xplorer"
depends on ARCH_CHIP_LPC4330FET100
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
NXG Technologies LPC4330 Xplorer board. This board is based on the
LPC4330FET100. The Code Red toolchain is used by default.
config ARCH_BOARD_LPC4337_WS
bool "WaveShare LPC4337-WS"
depends on ARCH_CHIP_LPC4337JBD144
---help---
The WaveShare LPC4337-ws board featuring the NXP LPC4337JBD144 MCU.
config ARCH_BOARD_LPC4357_EVB
bool "NXP LPC4357-EVB"
depends on ARCH_CHIP_LPC4357FET256
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
NXP Technologies LPC4357 EVB board. This board is based on the
LPC4357FET256.
config ARCH_BOARD_LPC4370_LINK2
bool "NXP LPC4370-Link2"
depends on ARCH_CHIP_LPC4370FET100
select ARCH_HAVE_LEDS
---help---
NXP LPC4370 Link2 board. This board is based on the
LPC4370FET100. The Code Red toolchain is used by default.
config ARCH_BOARD_LX_CPU
bool "PiKRON LX_CPU"
depends on ARCH_CHIP_LPC1788 || ARCH_CHIP_LPC4088
select ARCH_HAVE_LEDS
---help---
This port uses the PiKRON LX_CPU board. See the
http://pikron.com/pages/products/cpu_boards/lx_cpu.html
for further information. This board features the NXP LPC4088
(compatible with LPC1788) and Xilinx Spartan 6 XC6SLX9
config ARCH_BOARD_MAIX_BIT
bool "Sipeed Maix Bit board"
depends on ARCH_CHIP_K210
select ARCH_HAVE_LEDS if !K210_WITH_QEMU
---help---
This is the board configuration for the port of NuttX to the
Sipeed Maix Bit board. This board features the RISC-V K210
config ARCH_BOARD_SMARTL_C906
bool "smartl evaluation board for C906"
depends on ARCH_CHIP_C906
select ARCH_HAVE_LEDS if !C906_WITH_QEMU
---help---
This is the board configuration for the port of NuttX to the
THEAD smartl-c906 board. This board features the RISC-V C906.
config ARCH_BOARD_ICICLE_MPFS
bool "Polarfire Icicle evaluation board for MPFS"
depends on ARCH_CHIP_MPFS
select ARCH_HAVE_LEDS if !MPFS_WITH_QEMU
---help---
This is the board configuration for the port of NuttX to the
MicroChip icicle-mpfs board. This board features the RISC-V MPFS.
config ARCH_BOARD_M100PFSEVP_MPFS
bool "Aries M100PFSEVP evaluation platform for MPFS"
depends on ARCH_CHIP_MPFS
select MPFS_EMMCSD_MUX_GPIO if !MPFS_WITH_QEMU
---help---
This is the board configuration for the port of NuttX to the
MicroChip m100pfsevp-mpfs board. This board features the RISC-V MPFS.
config ARCH_BOARD_MAX32660_EVSYS
bool "Maxim Integrated MAX32660-EVSYS"
depends on ARCH_CHIP_MAX32660
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
This option enables support the Maxim Integrated MAX32660-EVSYS
board.
config ARCH_BOARD_MAKERLISP
bool "MakerLisp"
depends on ARCH_CHIP_EZ80F91
select ARCH_HAVE_LEDS
---help---
ez80Acclaim! Microcontroller. This port use the MakerLisp machine
based on an eZ80F091 part, and the Zilog ZDS-II Windows command line
tools. The development environment is Cygwin under Windows. A
Windows native development environment is available but has not
been verified.
config ARCH_BOARD_MAPLE
bool "maple board"
depends on ARCH_CHIP_STM32F103RB || ARCH_CHIP_STM32F103CB
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
A configuration for the LeafLab's Maple and Maple Mini boards.
These boards are based on the STM32F103RBT6 chip for the standard
version and on the STM32F103CBT6 for the mini version
(See http://leaflabs.com/docs/hardware/maple.html)
config ARCH_BOARD_MBED
bool "mbed LCP1768"
depends on ARCH_CHIP_LPC1768
select ARCH_HAVE_LEDS
---help---
This option enables support the mbed board (http://mbed.org)
that features the NXP LPC1768 microcontroller. This OS is also
built with the arm-nuttx-elf toolchain*. STATUS: Contributed.
config ARCH_BOARD_MCB1700
bool "Keil MCB1700"
depends on ARCH_CHIP_LPC1768
select ARCH_HAVE_LEDS
---help---
The configurations in this directory support the Keil MCB1700.
config ARCH_BOARD_MCU123_LPC214X
bool "mcu123.com LPC2148 Development Board"
depends on ARCH_CHIP_LPC214X
select ARCH_HAVE_LEDS
---help---
This port is for the NXP LPC2148 as provided on the mcu123.com
lpc214x development board. This OS is also built with the arm-nuttx-elf
toolchain*. The port supports serial, timer0, spi, and usb.
config ARCH_BOARD_MEGA1284P_XPLAINED
bool "Atmel MEGA-1284P-XPLAINED"
depends on ARCH_CHIP_ATMEGA1284P
select ARCH_HAVE_LEDS
---help---
This is the configuration to support Atmel MEGA-1284P-XPLAINED board.
config ARCH_BOARD_METRO_M4
bool "Adafruit M4 Metro"
depends on ARCH_CHIP_SAMD51J19
select ARCH_HAVE_LEDS
---help---
This configuration is the port of NuttX to the Adafruit Metro M4.
The Metro M4 uses a Arduino form factor and and pinout. It's powered
with an ATSAMD51J19
config ARCH_BOARD_MIRTOO
bool "Mirtoo PIC32 Module from Dimitech"
depends on ARCH_CHIP_PIC32MX250F128D
select ARCH_HAVE_LEDS
---help---
This is the port to the DTX1-4000L "Mirtoo" module. This module uses MicroChip
PIC32MX250F128D. See http://www.dimitech.com/ for further information.
config ARCH_BOARD_MICROPENDOUS3
bool "Opendous Micropendous 3 board"
depends on ARCH_CHIP_AT90USB646 || ARCH_CHIP_AT90USB647 || ARCH_CHIP_AT90USB1286 || ARCH_CHIP_AT90USB1287
---help---
This is a port to the Opendous Micropendous 3 board. This board may
be populated with either an AVR AT90USB646, 647, 1286, or 1287 MCU.
Support is configured for the AT90USB647.
config ARCH_BOARD_MISOC_QEMU
bool "Qemu LM32 demo"
depends on ARCH_CHIP_LM32
---help---
This configuration is port to NuttX running on a Qemu LM32 system.
You can find the Qemu setup at https://bitbucket.org/key2/qemu
config ARCH_BOARD_MISOC_VERILATOR
bool "Verilator Misoc demo"
depends on ARCH_CHIP_LM32 || ARCH_CHIP_MINERVA
---help---
This configuration is port to NuttX running on Verilator.
config ARCH_BOARD_MOTEINO_MEGA
bool "LowPowerLab MoteinoMEGA"
depends on ARCH_CHIP_ATMEGA1284P
select ARCH_HAVE_LEDS
---help---
This is placeholder for the LowPowerLab MoteinoMEGA that is based
on the Atmel AVR ATMega1284P MCU. There is not much there yet and what is
there is untested due to tool-related issues.
config ARCH_BOARD_MOXA
bool "Moxa board"
depends on ARCH_CHIP_MOXART
---help---
Moxa
config ARCH_BOARD_NE64BADGE
bool "FEG NE64 /PoE Badge board"
depends on ARCH_CHIP_MCS92S12NEC64
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
---help---
Future Electronics Group NE64 /PoE Badge board based on the
MC9S12NE64 hcs12 cpu. This port uses the m9s12x GCC toolchain.
STATUS: Under development. The port is code-complete but has
not yet been fully tested.
config ARCH_BOARD_NTOSD_DM320
bool "Neuros OSD v1.0 Dev Board"
depends on ARCH_CHIP_DM320
select ARCH_HAVE_LEDS
---help---
This port uses the Neuros OSD v1.0 Dev Board with a GNU arm-nuttx-elf
toolchain*: see
http://wiki.neurostechnology.com/index.php/OSD_1.0_Developer_Home
There are some differences between the Dev Board and the currently
available commercial v1.0 Boards. See
http://wiki.neurostechnology.com/index.php/OSD_Developer_Board_v1
NuttX operates on the ARM9EJS of this dual core processor.
STATUS: This port is code complete, verified, and included in the
NuttX 0.2.1 release.
config ARCH_BOARD_NRF52832_DK
bool "Nordic nRF52832 Development Kit (PCA10040)"
depends on ARCH_CHIP_NRF52
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
This option selects the Nordic nRF52832 Development Kit (PCA10040)
config ARCH_BOARD_NRF52_FEATHER
bool "Adafruit NRF52 Feather board"
depends on ARCH_CHIP_NRF52
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
---help---
This option selects the Adafruit nRF52832 Feather board
config ARCH_BOARD_NRF52832_SPARKFUN
bool "Sparkfun nRF52832 breakout board"
depends on ARCH_CHIP_NRF52
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
---help---
This option selects the Sparkfun nRF52832 breakout board
config ARCH_BOARD_NRF52832_MDK
bool "MakerDiary nRF52832 MDK"
depends on ARCH_CHIP_NRF52
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
---help---
This option selects MakerDiary's nRF52832 MDKboard
config ARCH_BOARD_NRF52840_DK
bool "Nordic nRF52840 Development Kit (PCA10056)"
depends on ARCH_CHIP_NRF52
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
This option selects the Nordic nRF52840 Development Kit (PCA10056)
config ARCH_BOARD_NRF52840_DONGLE
bool "Nordic nRF52840 Dongle (PCA10059)"
depends on ARCH_CHIP_NRF52
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
---help---
This option selects the Nordic nRF52840 Dongle (PCA10059)
config ARCH_BOARD_ARDUINO_NANO_33BLE
bool "Arduino Nano 33 BLE Sense based on Nordic nRF52840"
depends on ARCH_CHIP_NRF52
select ARCH_HAVE_LEDS
---help---
Arduino Nano 33 BLE Sense based on Nordic nRF52840
config ARCH_BOARD_ARDUINO_NANO_33BLE_REV2
bool "Arduino Nano 33 BLE Sense Rev2 based on Nordic nRF52840"
depends on ARCH_CHIP_NRF52
select ARCH_HAVE_LEDS
---help---
Arduino Nano 33 BLE Sense Rev2 based on Nordic nRF52840
config ARCH_BOARD_THINGY52
bool "Nordic Thingy:52 Prototyping platform"
depends on ARCH_CHIP_NRF52
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
This option selects the Nordic Thingy:52 prototyping platform
config ARCH_BOARD_NRF5340_DK
bool "Nordic nRF5340 Development Kit (PCA10095)"
depends on ARCH_CHIP_NRF53
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
This option selects the nRF5340 Development Kit (PCA10095)
config ARCH_BOARD_NRF5340_AUDIO_DK
bool "Nordic nRF5340 Audio Development Kit (PCA10121)"
depends on ARCH_CHIP_NRF53
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
---help---
This option selects the nRF5340 Audio Development Kit (PCA10121)
config ARCH_BOARD_THINGY53
bool "Nordic Thingy:53 IoT prototyping platform"
depends on ARCH_CHIP_NRF53
select ARCH_HAVE_BUTTONS
---help---
This option selects the Thingy:53 multi-protocol IoT prototyping platform
config ARCH_BOARD_NRF9160_DK
bool "Nordic nRF9160 Development Kit (PCA10090)"
depends on ARCH_CHIP_NRF91
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
This option selects the nRF9160 Development Kit (PCA10090)
config ARCH_BOARD_THINGY91
bool "Nordic Thingy:91 cellular IoT prototyping platform - nRF9160"
depends on ARCH_CHIP_NRF91
select ARCH_HAVE_BUTTONS
---help---
This option selects the Thingy:91 cellular IoT prototyping platform - nRF9160 chip
config ARCH_BOARD_THINGY91_NRF52
bool "Nordic Thingy:91 cellular IoT prototyping platform - nRF52840"
depends on ARCH_CHIP_NRF52
---help---
This option selects the Thingy:91 cellular IoT prototyping platform - nRF52840 chip
config ARCH_BOARD_NRF9160_DK_NRF52
bool "Nordic nRF9160 Development Kit (PCA10090) - nRF52840"
depends on ARCH_CHIP_NRF52
---help---
This option selects the nRF9160 Development Kit (PCA10090) - nRF52840 chip
config ARCH_BOARD_NUTINY_NUC120
bool "Nuvoton NuTiny NUC120"
depends on ARCH_CHIP_NUC120LE3AN
select ARCH_HAVE_LEDS
---help---
This is the port to the Nuvoton NuTiny EVB 120 board. This board uses a
Nuvoton NUC120 chip, specifically the NUC120LE3AN. See http://www.nuvoton.com/
for further information.
config ARCH_BOARD_OLIMEX_EFM32G880F128_STK
bool "Olimex EFM32G880F128 STK"
depends on ARCH_CHIP_EFM32G880F128
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
This options selects the Olimex EFM32G880F128 STK
config ARCH_BOARD_OLIMEXLPC2378
bool "Olimex-lpc2378 board"
depends on ARCH_CHIP_LPC2378
select ARCH_HAVE_LEDS
---help---
This port uses the Olimex-lpc2378 board and a GNU arm-nuttx-elf toolchain* under
Linux or Cygwin. STATUS: ostest and NSH configurations available.
This port for the NXP LPC2378 was contributed by Rommel Marcelo.
config ARCH_BOARD_OLIMEX_LPC_H3131
bool "Olimex LPC-H3131 Development board"
depends on ARCH_CHIP_LPC3131
select ARCH_HAVE_LEDS
---help---
Olimex LPC-H3131 development board. This board is based on the
NXP LPC3131 MCU.
config ARCH_BOARD_OLIMEX_STRP711
bool "Olimex STR-P711 board"
depends on ARCH_CHIP_STR71X
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
---help---
This port uses the Olimex STR-P711 board and a GNU arm-nuttx-elf toolchain* under
Linux or Cygwin. See the http://www.olimex.com/dev/str-p711.html" for
further information. STATUS: Configurations for the basic OS test and NSH
are complete and verified.
config ARCH_BOARD_ODRIVE36
bool "Odrive V3.6 board"
depends on ARCH_CHIP_STM32F405RG
---help---
This port uses the ODrive3.6 board. This is an open-source dual-motor
FOC controller based on the STMicro STM32F405RG and TI DRV8301 gate drivers.
See https://odriverobotics.com/shop/odrive-v36 for further information.
config ARCH_BOARD_OLIMEX_STM32H405
bool "Olimex STM32 H405 board"
depends on ARCH_CHIP_STM32F405RG
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
This port uses the Olimex STM32 H405 board and a GNU arm-nuttx-elf
toolchain* under Linux or Cygwin. See the http://www.olimex.com for
further information. This board features the STMicro STM32F405RGT6
MCU.
config ARCH_BOARD_OLIMEX_STM32H407
bool "Olimex STM32 H407 board"
depends on ARCH_CHIP_STM32F407ZG
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
This port uses the Olimex STM32 H407 board and a GNU arm-nuttx-elf
toolchain* under Linux or Cygwin. See the http://www.olimex.com for
further information. This board features the STMicro STM32F407ZGT6 (144pins).
config ARCH_BOARD_OLIMEX_STM32E407
bool "Olimex STM32 E407 board"
depends on ARCH_CHIP_STM32F407ZG || ARCH_CHIP_STM32F407ZE
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
Olimex STM32 E407 board based on the STMicro STM32F407ZGT6 (144pins)
or STM32F407ZE on newer boards.
config ARCH_BOARD_OLIMEX_STM32P107
bool "Olimex STM32 P107 board"
depends on ARCH_CHIP_STM32F107VC
---help---
This port uses the Olimex STM32 P107 board and a GNU arm-nuttx-elf toolchain* under
Linux or Cygwin. See the http://www.olimex.com for further information. This
board features the STMicro STM32F107VC MCU
config ARCH_BOARD_OLIMEX_STM32P207
bool "Olimex STM32 P207 board"
depends on ARCH_CHIP_STM32F207ZE
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
This port uses the Olimex STM32 P207 board and a GNU arm-nuttx-elf
toolchain under Linux or Cygwin. See the http://www.olimex.com for
further information. This board features the STMicro STM32F207ZE MCU
config ARCH_BOARD_OLIMEX_STM32P407
bool "Olimex STM32 P407 board"
depends on ARCH_CHIP_STM32F407ZG
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
This port uses the Olimex STM32 P407 board and a GNU arm-nuttx-elf
toolchain under Linux or Cygwin. See the http://www.olimex.com for
further information. This board features the STMicro STM32F407ZG MCU
config ARCH_BOARD_OLIMEXINO_STM32
bool "Olimexino STM32 board"
depends on ARCH_CHIP_STM32F103RB
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
This port uses the Olimexino STM32 board and a GNU arm-nuttx-elf
toolchain under Linux or Cygwin. See the http://www.olimex.com for
further information. This board features the STMicro STM32F103RBT6 MCU.
Contributed by David Sidrane.
config ARCH_BOARD_OPEN1788
bool "Wave Share Open1788"
depends on ARCH_CHIP_LPC1788
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
This port uses the Wave Share Open1788 board. See the
http://wvshare.com/product/Open1788-Standard.htm for further
information. This board features the NXP LPC1788 MCU
config ARCH_BOARD_OR1K
bool "OpenRISC generic board"
depends on ARCH_CHIP_MOR1KX
select ARCH_HAVE_LEDS
---help---
Generic OpenRISC board.
config ARCH_BOARD_P112
bool "P112 Z180-based platform"
depends on ARCH_CHIP_Z8018216FSG
---help---
The P112 is notable because it was the first of the hobbyist single board
computers to reach the production stage. The P112 hobbyist computers
were relatively widespread and inspired other hobbyist centered home brew
computing projects such as N8VEM home brew computing project. The P112
project still maintains many devoted enthusiasts and has an online
repository of software and other information.
The P112 computer originated as a commercial product of "D-X Designs Pty
Ltd" of Australia. They describe the computer as "The P112 is a stand-alone
8-bit CPU board. Typically running CP/M (tm) or a similar operating system,
it provides a Z80182 (Z-80 upgrade) CPU with up to 1MB of memory, serial,
parallel and diskette IO, and realtime clock, in a 3.5-inch drive form factor.
Powered solely from 5V, it draws 150mA (nominal: not including disk drives)
with a 16MHz CPU clock. Clock speeds up to 24.576MHz are possible."
The P112 board was last available new in 1996 by Dave Brooks. In late 2004
on the Usenet Newsgroup comp.os.cpm, talk about making another run of P112
boards was discussed. David Griffith decided to produce additional P112 kits
with Dave Brooks blessing and the assistance of others. In addition Terry
Gulczynski makes additional P112 derivative hobbyist home brew computers.
Hal Bower was very active in the mid 1990's on the P112 project and ported
the "Banked/Portable BIOS".
config ARCH_BOARD_PCDUINO_A10
bool "pcDuino A10"
depends on ARCH_CHIP_A10
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
This is the port of NuttX to the Allwinner A10-based pcDuino v1
board. See http://www.pcduino.com/ for information about pcDuino Lite, v1,
and v2. I have not compared these boards in detail, but I believe that
the differences are cosmetic. This port was developed on the v1 board,
but the others may be compatible.
config ARCH_BOARD_BEAGLEBONE_BLACK
bool "beaglebone black"
depends on ARCH_CHIP_AM335X
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
This is the port of NuttX to the TI Beaglebone Black board.
config ARCH_BOARD_PIC32MX_STARTERKIT
bool "Microchip PIC32MX Ethernet Starter Kit (DM320004)"
depends on ARCH_CHIP_PIC32MX795F512L
select ARCH_HAVE_LEDS
---help---
This is the port of NuttX to the Microchip PIC32 Ethernet Starter Kit
(DM320004) with the Multimedia Expansion Board (MEB, DM320005).
See www.microchip.com for further information.
config ARCH_BOARD_PIC32MX7MMB
bool "Mikroelektronika PIC32MX7 MMB"
depends on ARCH_CHIP_PIC32MX795F512L
select ARCH_HAVE_LEDS
---help---
This is the port NuttX to the Mikroelektronika PIC32MX7 Multimedia Board
(MMB). See http://www.mikroe.com/ for further information.
config ARCH_BOARD_PIC32MZ_STARTERKIT
bool "Microchip PIC32MZ Ethernet Starter Kit ((DM320006)"
depends on ARCH_CHIP_PIC32MZ2048ECH || ARCH_CHIP_PIC32MZ2048ECM
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS if PIC32MZ_GPIOIRQ_PORTB
---help---
This is the port of NuttX to the Microchip PIC32MZ Embedded
Connectivity (EC) Starter Kit. There are two configurations of the
starter kit:
1) The PIC32MZ Embedded Connectivity Starter Kit based on the
PIC32MZ2048ECH144-I/PH chip (DM320006), and
2) The PIC32MZ Embedded Connectivity Starter Kit based on the
PIC32MZ2048ECM144-I/PH w/Crypto Engine (DM320006-C)
See www.microchip.com for further information.
config ARCH_BOARD_NUCLEO_F429ZI
bool "STMicro NUCLEO-F429ZI"
depends on ARCH_CHIP_STM32F429Z
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
STMicro Nucleo-F429zi board based on the STMicro STM32F429ZIT6 MCU.
config ARCH_BOARD_NUCLEO_144
bool "STMicro NUCLEO-144"
depends on ARCH_CHIP_STM32F722ZE || ARCH_CHIP_STM32F746ZG || ARCH_CHIP_STM32F767ZI
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
STMicro Nucleo-144 development board featuring STMicroelectronics
F2, F3, F4, F7 and L4 MCU families. The board is a "Hardware pattern"
that can be populated with the 144 pin package of the following MCUs:
Target STM32 Order code
STM32F207ZGT6 NUCLEO-F207ZG
STM32F303ZET6 NUCLEO-F303ZE
STM32F429ZIT6 NUCLEO-F429ZI
STM32F446ZET6 NUCLEO-F446ZE
STM32F722ZET6 NUCLEO-F722ZE
STM32F746ZGT6 NUCLEO-F746ZG
STM32F767ZIT6 NUCLEO-F767ZI
STM32L496ZGT6 NUCLEO-L496ZG
STM32L496ZGT6P NUCLEO-L496ZG-P
Supported in this configuration are:
NUCLEO-F722ZE - STM32F722ZET6 a 216MHz Cortex-M7, w/FPU -
512KiB Flash memory and 256KiB SRAM.
NUCLEO-F746ZG - STM32F746ZGT6 a 216MHz Cortex-M7, w/FPU -
1024KiB Flash memory and 320KiB SRAM.
NUCLEO-F767ZI - STM32F767ZIT6 a 216MHz Cortex-M7, w/DPFPU -
2048KiB Flash memory and 512KiB SRAM.
config ARCH_BOARD_NUCLEO_L073RZ
bool "STM32L073RZU6 Nucleo L073RZ"
depends on ARCH_CHIP_STM32L073RZ
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
STMicro Nucleo L073RZ board based on the STMicro STM32L073RZU6 MCU.
config ARCH_BOARD_NUCLEO_L496ZG
bool "STM32L496 Nucleo L496ZG"
depends on ARCH_CHIP_STM32L496ZG
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
STMicro Nucleo-144 development board featuring STMicroelectronics
F2, F3, F4, F7 and L4 MCU families. The board is a "Hardware pattern"
that can be populated with the 144 pin package of the following MCUs:
Target STM32 Order code
STM32F207ZGT6 NUCLEO-F207ZG
STM32F303ZET6 NUCLEO-F303ZE
STM32F429ZIT6 NUCLEO-F429ZI
STM32F446ZET6 NUCLEO-F446ZE
STM32F746ZGT6 NUCLEO-F746ZG
STM32F767ZIT6 NUCLEO-F767ZI
STM32L496ZGT6 NUCLEO-L496ZG
STM32L496ZGT6P NUCLEO-L496ZG-P
Supported in this configuration are:
NUCLEO-L496ZG - STM32L496ZGT6 a 80MHz Cortex-M4, w/FPU -
1024KiB Flash memory and 320KiB SRAM.
config ARCH_BOARD_NUCLEO_F072RB
bool "STM32F072 Nucleo F072RB"
depends on ARCH_CHIP_STM32F072RB
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
STMicro Nucleo F072RB board based on the STMicro STM32F072RBT6 MCU.
config ARCH_BOARD_NUCLEO_F091RC
bool "STM32F091 Nucleo F091RC"
depends on ARCH_CHIP_STM32F091RC
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
STMicro Nucleo F091RC board based on the STMicro STM32F091RCT6 MCU.
config ARCH_BOARD_NUCLEO_F103RB
bool "STM32F103 Nucleo F103RB"
depends on ARCH_CHIP_STM32F103RB
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
STMicro Nucleo F103RB board based on the STMicro STM32F103RBT6 MCU.
config ARCH_BOARD_NUCLEO_F207ZG
bool "STM32F207 Nucleo F207ZG"
depends on ARCH_CHIP_STM32F207ZG
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
STMicro Nucleo F207ZG board based on the STMicro STM32F207ZGT6 MCU.
config ARCH_BOARD_NUCLEO_F302R8
bool "STM32F303 Nucleo F302R8"
depends on ARCH_CHIP_STM32F302R8
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
STMicro Nucleo F302R8 board based on the STMicro STM32F302R8T6 MCU.
config ARCH_BOARD_NUCLEO_F303RE
bool "STM32F303 Nucleo F303RE"
depends on ARCH_CHIP_STM32F303RE
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
STMicro Nucleo F303RE board based on the STMicro STM32F303RET6 MCU.
config ARCH_BOARD_NUCLEO_F303ZE
bool "STM32F303 Nucleo F303ZE"
depends on ARCH_CHIP_STM32F303ZE
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
STMicro Nucleo F303ZE board based on the STMicro STM32F303ZET6 MCU.
config ARCH_BOARD_NUCLEO_F334R8
bool "STM32F334 Nucleo F334R8"
depends on ARCH_CHIP_STM32F334R8
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
STMicro Nucleo F334R8 board based on the STMicro STM32F334R8 MCU.
config ARCH_BOARD_NUCLEO_F401RE
bool "STM32F401 Nucleo F401RE"
depends on ARCH_CHIP_STM32F401RE
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
This is a minimal configuration that supports low-level test of the
Nucleo F401RE in the NuttX source tree.
config ARCH_BOARD_STM32F401RC_RS485
bool "STM32F401RC-RS485 Board"
depends on ARCH_CHIP_STM32F401RC
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
This is a minimal configuration that supports low-level test of the
STM32F401RC-RS485 in the NuttX source tree.
config ARCH_BOARD_NUCLEO_F410RB
bool "STM32F410 Nucleo F410RB"
depends on ARCH_CHIP_STM32F410RB
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
This is a minimal configuration that supports low-level test of the
Nucleo F410RB in the NuttX source tree.
config ARCH_BOARD_NUCLEO_F411RE
bool "STM32F411 Nucleo F411RE"
depends on ARCH_CHIP_STM32F411RE
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
This is a minimal configuration that supports low-level test of the
Nucleo F411RE in the NuttX source tree.
config ARCH_BOARD_NUCLEO_F412ZG
bool "STM32F412 Nucleo F412ZG"
depends on ARCH_CHIP_STM32F412ZG
select ARCH_HAVE_LEDS
---help---
This is a minimal configuration that supports low-level test of the
Nucleo F412ZG in the NuttX source tree.
config ARCH_BOARD_NUCLEO_F446RE
bool "STM32F446 Nucleo F446RE"
depends on ARCH_CHIP_STM32F446R
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
This is a minimal configuration that supports low-level test of the
Nucleo F446RE in the NuttX source tree.
config ARCH_BOARD_STM32G071B_DISCO
bool "STM32G071 STM32G071B-DISO"
depends on ARCH_CHIP_STM32G071RB
select ARCH_HAVE_LEDS
---help---
The STM32G071B-DISCO board based on the STM32G071RB MCU
config ARCH_BOARD_NUCLEO_G070RB
bool "STM32G070 Nucleo G070RB"
depends on ARCH_CHIP_STM32G070RB
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
This is a minimal configuration that supports low-level test of the
Nucleo G070RB in the NuttX source tree.
config ARCH_BOARD_NUCLEO_G071RB
bool "STM32G071 Nucleo G071RB"
depends on ARCH_CHIP_STM32G071RB
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
This is a minimal configuration that supports low-level test of the
Nucleo G071RB in the NuttX source tree.
config ARCH_BOARD_NUCLEO_H743ZI
bool "STM32H743 Nucleo H743ZI"
depends on ARCH_CHIP_STM32H743ZI
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
# TODO: select ARCH_HAVE_IRQBUTTONS
---help---
STMicro Nucleo H743ZI board based on the STMicro STM32H743ZI MCU.
config ARCH_BOARD_NUCLEO_H743ZI2
bool "STM32H743 Nucleo H743ZI2"
depends on ARCH_CHIP_STM32H743ZI
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
---help---
STMicro Nucleo H743ZI2 board based on the STMicro STM32H743ZI MCU.
config ARCH_BOARD_NUCLEO_H745ZI
bool "STM32H745 Nucleo H745ZI"
depends on ARCH_CHIP_STM32H745ZI
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
---help---
STMicro Nucleo H745ZI board based on the STMicro STM32H745ZI MCU.
config ARCH_BOARD_STM32H745I_DISCO
bool "STM32H745I-DISCO board"
depends on ARCH_CHIP_STM32H745XI
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
---help---
STMicro STM32H745I-DISCO board based on the STMicro
STM32H745XI MCU.
config ARCH_BOARD_LINUM_STM32H753BI
bool "Linum (STM32H753BI) board"
depends on ARCH_CHIP_STM32H753BI
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
---help---
The Linum board is based on the STMicro STM32H753BI MCU.
config ARCH_BOARD_NUCLEO_L152RE
bool "STM32L152 Nucleo L152RE"
depends on ARCH_CHIP_STM32L152RE
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
STMicro Nucleo L152RE board based on the STMicro STM32L152REU6 MCU.
config ARCH_BOARD_NUCLEO_L432KC
bool "STM32L432 Nucleo-32 L432KC"
depends on ARCH_CHIP_STM32L432KC
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
STMicro Nucleo-32 L432KC board based on the STMicro STM32L432KCU6 MCU.
config ARCH_BOARD_NUCLEO_L452RE
bool "STM32L452 Nucleo L452RE"
depends on ARCH_CHIP_STM32L452RE
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
STMicro Nucleo L452RE board based on the STMicro STM32L452RET6 MCU.
config ARCH_BOARD_NUCLEO_L476RG
bool "STM32L476 Nucleo L476RG"
depends on ARCH_CHIP_STM32L476RG
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
STMicro Nucleo L476RG board based on the STMicro STM32L476RGT6 MCU.
config ARCH_BOARD_STEVAL_STLCS01V1
bool "STEVAL-STLCS01V1 (SensorTile)"
depends on ARCH_CHIP_STM32L476JG
select ARCH_HAVE_LEDS
---help---
STMicro STEVAL-STLCS01V1 (SensorTile) based on the STMicro STM32L476JG MCU.
config ARCH_BOARD_NUCLEO_L552ZE
bool "STM32L552 Nucleo L552ZE"
depends on ARCH_CHIP_STM32L552ZE
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
STMicro Nucleo STM32L552 board based on the STMicro STM32L552ZET6 MCU.
config ARCH_BOARD_FLIPPERZERO
bool "Flipper Zero"
depends on ARCH_CHIP_STM32WB55RG
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
Flipper Zero device based on the STMicro STM32WB55RGV6 MCU.
config ARCH_BOARD_NUCLEO_WB55RG
bool "STM32WB55 Nucleo WB55RG"
depends on ARCH_CHIP_STM32WB55RG
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
STMicro Nucleo WB55RG board based on the STMicro STM32WB55RGV6 MCU.
config ARCH_BOARD_NUCLEO_WL55JC
bool "STM32WL55 Nucleo WL55JC"
depends on ARCH_CHIP_STM32WL55JC_CPU1 || ARCH_CHIP_STM32WL55JC_CPU2
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
STMicro Nucleo STM32WL55 board based on the STMicro STM32WL55JC MCU.
config ARCH_BOARD_QEMU_I486
bool "Qemu i486 Mode"
depends on ARCH_CHIP_QEMU_I486
---help---
Port of NuttX to QEMU in i486 mode. This port will also run on real i486
hardware (Google the Bifferboard).
config ARCH_BOARD_INTEL64_QEMU
bool "Intel64 for Qemu simulator"
depends on ARCH_X86_64 || ARCH_INTEL64
---help---
Port of NuttX to QEMU in intel64 mode. This port will also run on real
generic Intel64 hardware.
config ARCH_BOARD_RASPBERRYPI_PICO
bool "Raspberry Pi Pico board (not W)"
depends on ARCH_CHIP_RP2040
select ARCH_HAVE_LEDS
---help---
This is a port to the Raspberry Pi Pico board.
config ARCH_BOARD_RASPBERRYPI_PICO_W
bool "Raspberry Pi Pico W board"
depends on ARCH_CHIP_RP2040
---help---
This is a port to the Raspberry Pi Pico W board.
config ARCH_BOARD_PIMORONI_TINY2040
bool "Pimoroni Tiny2040 board"
depends on ARCH_CHIP_RP2040
---help---
This is a port to the Pimoroni Tiny2040 board.
Support is derived from Raspberry Pi Pico support.
STATUS: Work has just began on this port.
config ARCH_BOARD_ADAFRUIT_FEATHER_RP2040
bool "Adafruit Feather RP2040 board"
depends on ARCH_CHIP_RP2040
---help---
This is a port to the Adafruit Feather RP2040 board.
Support is derived from Raspberry Pi Pico support.
config ARCH_BOARD_SEEED_XIAO_RP2040
bool "Seeed Studio XIAO RP2040 board"
depends on ARCH_CHIP_RP2040
---help---
This is a port to the Seeed Studio XIAO RP2040 board.
Support is derived from Raspberry Pi Pico support.
config ARCH_BOARD_ADAFRUIT_KB2040
bool "Adafruit KB2040 board"
depends on ARCH_CHIP_RP2040
---help---
This is a port to the Adafruit KB2040 board.
Support is derived from Raspberry Pi Pico support.
config ARCH_BOARD_ADAFRUIT_QT_PY_RP2040
bool "Adafruit QT Py RP2040 board"
depends on ARCH_CHIP_RP2040
---help---
This is a port to the Adafruit QT Py RP2040 board.
Support is derived from Raspberry Pi Pico support.
config ARCH_BOARD_WAVESHARE_RP2040_LCD_1_28
bool "Waveshare RP2040 LCD 1.28 board"
depends on ARCH_CHIP_RP2040
---help---
This is a port to the Waveshare RP2040 LCD 1.28 board.
Support is derived from Raspberry Pi Pico support.
config ARCH_BOARD_RX65N
bool "RX65N renesas board"
depends on ARCH_CHIP_R5F565NEDDFC
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
---help---
This is a port of the renesas RX65N on the Renesas RX65N board.
STATUS: Work has just began on this port.
config ARCH_BOARD_RX65N_RSK1MB
bool "RX65N on RSKRX65N-1MB renesas board"
depends on ARCH_CHIP_R5F565NEDDFC
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
---help---
This is a port of the renesas RX65N on the Renesas RX65N board.
STATUS: Work has just began on this port.
config ARCH_BOARD_RX65N_RSK2MB
bool "RX65N on RSKRX65N-2MB renesas board"
depends on ARCH_CHIP_R5F565NEHDFC
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
---help---
This is a port of the renesas RX65N on the Renesas RX65N board.
STATUS: Work has just began on this port.
config ARCH_BOARD_RX65N_GRROSE
bool "RX65N on GR-ROSE renesas board"
depends on ARCH_CHIP_R5F565NEHDFP
select ARCH_HAVE_LEDS
---help---
This is a port of the renesas RX65N on the Renesas RX65N board.
STATUS: Work has just began on this port.
config ARCH_BOARD_RV32M1_VEGA
bool "RV32M1 VEGA board"
depends on ARCH_CHIP_RV32M1
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
This is the board configuration for the port of NuttX to the
RV32M1 VEGA board. This board features the RV32M1 RISC-V Core(s).
config ARCH_BOARD_QEMU_RV_VIRT
bool "QEMU RV Virt"
depends on ARCH_CHIP_QEMU_RV
---help---
This is the board configuration for the port of NuttX to the
QEMU RV32 Virt board. This board features the QEMU RV32 CPU.
config ARCH_BOARD_JH7110_STAR64
bool "PINE64 Star64"
depends on ARCH_CHIP_JH7110
---help---
This options selects support for NuttX on PINE64 Star64 based
on StarFive JH7110 SoC.
config ARCH_BOARD_K230_CANMV
bool "CanMV K230"
depends on ARCH_CHIP_K230
---help---
This selects NuttX on CanMV-K230 board with Kendryte K230 SoC.
config ARCH_BOARD_BL808_OX64
bool "PINE64 Ox64"
depends on ARCH_CHIP_BL808
---help---
This options selects support for NuttX on PINE64 Ox64 based
on Bouffalo Lab BL808 SoC.
config ARCH_BOARD_S32K118EVB
bool "NXP S32K118EVB"
depends on ARCH_CHIP_S32K118
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
This options selects support for NuttX on the NXP S32K118EVB board
featuring the S32K118 Cortex-M0+.
config ARCH_BOARD_S32K144EVB
bool "NXP S32K144EVB"
depends on ARCH_CHIP_S32K144
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
This options selects support for NuttX on the NXP S32K144EVB board
featuring the S32K144 Cortex-M4F.
config ARCH_BOARD_RDDRONE_BMS772
bool "NXP RDDRONE-BMS772"
depends on ARCH_CHIP_S32K144
select ARCH_HAVE_LEDS
---help---
This options selects support for NuttX on the NXP RDDRONE-BMS772
board featuring the S32K144 Cortex-M4F.
config ARCH_BOARD_S32K146EVB
bool "NXP S32K146EVB"
depends on ARCH_CHIP_S32K146
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
This options selects support for NuttX on the NXP S32K146EVB board
featuring the S32K146 Cortex-M4F.
config ARCH_BOARD_UCANS32K146
bool "NXP UCANS32K146"
depends on ARCH_CHIP_S32K146
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
This options selects support for NuttX on the NXP UCANS32K1 board
featuring the S32K146 Cortex-M4F.
config ARCH_BOARD_S32K148EVB
bool "NXP S32K148EVB"
depends on ARCH_CHIP_S32K148
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
This options selects support for NuttX on the NXP S32K148EVB board
featuring the S32K148 Cortex-M4F.
config ARCH_BOARD_S32K344EVB
bool "NXP S32K344EVB"
depends on ARCH_CHIP_S32K344
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
This options selects support for NuttX on the NXP S32K344EVB board
featuring the S32K344 Cortex-M7.
config ARCH_BOARD_MR_CANHUBK3
bool "NXP MR-CANHUBK3"
depends on ARCH_CHIP_S32K344
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
This options selects support for NuttX on the NXP MR-CANHUBK3 board
featuring the S32K344 Cortex-M7.
config ARCH_BOARD_SABRE_6QUAD
bool "NXP/Freescale i.MX6 Sabre-6Quad board"
depends on ARCH_CHIP_IMX6_6QUAD
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
This options selects support for NuttX on the NXP/Freescale Sabre
board featuring the iMX 6Quad CPU.
config ARCH_BOARD_TC397
bool "Infineon's AURIX TC397 board: KIT_A2G_TC397_5V_TFT"
---help---
This options selects support for NuttX on the Infineon's AURIX board
board featuring the TC397 6Quad CPU.
config ARCH_BOARD_QEMU_ARMV7A
bool "Qemu ARMv7a CPUs board"
depends on ARCH_CHIP_QEMU_ARM
select ARCH_HAVE_IRQBUTTONS
---help---
This options selects support for NuttX on the QEMU ARMv7a + virt
board featuring the qemu ARMv7a CPUs.
config ARCH_BOARD_QEMU_ARMV8A
bool "Qemu ARMv8a CPUs board"
depends on ARCH_CHIP_QEMU
select ARCH_HAVE_IRQBUTTONS
---help---
This options selects support for NuttX on the QEMU ARMv8a + virt
board featuring the qemu ARMv8a CPUs.
config ARCH_BOARD_PINEPHONE
bool "PINE64 PinePhone"
depends on ARCH_CHIP_A64
select ARCH_HAVE_LEDS
select ARCH_HAVE_IRQBUTTONS
---help---
This options selects support for NuttX on PINE64 PinePhone based
on Allwinner A64 SoC with ARM Cortex-A53.
config ARCH_BOARD_PINEPHONE_PRO
bool "PINE64 PinePhonePro"
depends on ARCH_CHIP_RK3399
select ARCH_HAVE_LEDS
select ARCH_HAVE_IRQBUTTONS
---help---
This options selects support for NuttX on PINE64 PinePhone based
on Rockchip RK3399 SoC with ARM Cortex-A53
config ARCH_BOARD_NANOPI_M4
bool "FriendlyElec NanoPi M4"
depends on ARCH_CHIP_RK3399
select ARCH_HAVE_LEDS
select ARCH_HAVE_IRQBUTTONS
---help---
This options selects support for NuttX on FriendlyElec NanoPi M4
based on Rockchip RK3399 SoC with ARM Cortex-A53
config ARCH_BOARD_FVP_ARMV8R
bool "FVP ARM-v8r CPUs board"
depends on ARCH_CHIP_FVP_ARMV8R
select ARCH_HAVE_IRQBUTTONS
---help---
This options selects support for NuttX on the Armv8-R AEM FVP
configure board with ARM Cortex-R82.
config ARCH_BOARD_FVP_ARMV8R_AARCH32
bool "FVP ARM-v8r AARCH32 CPUs board"
depends on ARCH_CHIP_FVP_ARMV8R_AARCH32
select ARCH_HAVE_IRQBUTTONS
---help---
This options selects support for NuttX on the Armv8-R AEM FVP
configure board with ARM Cortex-R52.
config ARCH_BOARD_IMX8QM_MEK
bool "NXP i.MX8 QuadMax CPUs MEK board"
depends on ARCH_CHIP_IMX8_QUADMAX
select ARCH_HAVE_IRQBUTTONS
---help---
This options selects support for NuttX on the NXP i.MX8 QuadMax CPUs MEK
configure board with ARM Cortex-A53.
config ARCH_BOARD_SAMA5D2_XULT
bool "Atmel SAMA5D2 Xplained Ultra development board"
depends on ARCH_CHIP_ATSAMA5D27
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
The port of NuttX to the Atmel SAMA5D2-XULT development board
config ARCH_BOARD_GIANT_BOARD
bool "Groboards Giant Board (SAMA5D27C-D1G)"
depends on ARCH_CHIP_ATSAMA5D27
select ARCH_HAVE_LEDS
---help---
This options selects support for NuttX on the Groboards Giant Board,
featuring the SAMA5D27C-D1G SIP with 128MB DDR2 RAM.
config ARCH_BOARD_JUPITER_NANO
bool "Starcat Jupiter Nano (SAMA5D27C-LD1G)"
depends on ARCH_CHIP_ATSAMA5D27
select SAMA5D27_JUPITER_NANO_498MHZ
select ARCH_HAVE_LEDS
---help---
This options selects support for NuttX on the Starcat Jupiter Nano
featuring the SAMA5D27C-LD1G SIP with 128MB LPDDR2 RAM.
config ARCH_BOARD_SAMA5D3X_EK
bool "Atmel SAMA5D3x-EK development board"
depends on ARCH_CHIP_ATSAMA5D31 || ARCH_CHIP_ATSAMA5D33 || ARCH_CHIP_ATSAMA5D34 || ARCH_CHIP_ATSAMA5D35
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
select ARCH_PHY_INTERRUPT
---help---
The port of NuttX to the Atmel SAMA5D3x-EK development board (where x=1,3,4, or 5).
config ARCH_BOARD_SAMA5D3_XPLAINED
bool "Atmel SAMA5D3 Xplained development board"
depends on ARCH_CHIP_ATSAMA5D36
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
select ARCH_PHY_INTERRUPT if SAMA5_EMACA || SAMA5_EMAC0 || SAMA5_EMAC1 || SAMA5_GMAC
---help---
The port of NuttX to the Atmel SAMA5D3 Xplained development board.
config ARCH_BOARD_SAMA5D4_EK
bool "Atmel SAMA5D4-EK development board"
depends on ARCH_CHIP_ATSAMA5D44
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
select ARCH_PHY_INTERRUPT
---help---
The port of NuttX to the Atmel SAMA5D4-EK development board
config ARCH_BOARD_SAMD20_XPLAINED
bool "Atmel SAMD20-Xplained Pro development board"
depends on ARCH_CHIP_SAMD20J18
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
The port of NuttX to the Atmel SAMD20-Xplained Pro development board.
This board features the ATSAMD20J18A MCU (Cortex-M0+ with 256KB of FLASH
and 32KB of SRAM).
config ARCH_BOARD_SAMD21_XPLAINED
bool "Atmel SAMD21-Xplained Pro development board"
depends on ARCH_CHIP_SAMD21J18A
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
The port of NuttX to the Atmel SAMD21-Xplained Pro development board.
This board features the ATSAMD21J18A MCU (Cortex-M0+ with 256KB of FLASH
and 32KB of SRAM).
config ARCH_BOARD_SAME54_XPLAINED_PRO
bool "Atmel SAME54-Xplained Pro development board"
depends on ARCH_CHIP_SAME54P20
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
The port of NuttX to the Atmel SAME54-Xplained Pro development board.
config ARCH_BOARD_SAML21_XPLAINED
bool "Atmel SAML21-Xplained Pro development board"
depends on ARCH_CHIP_SAML21J18
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
The port of NuttX to the Atmel SAML21-Xplained Pro development board.
This board features the ATSAML21J18A MCU (Cortex-M0+ with 256KB of FLASH
and 32KB of SRAM).
config ARCH_BOARD_SAM3UEK
bool "Atmel SAM3U-EK development board"
depends on ARCH_CHIP_ATSAM3U4E
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
The port of NuttX to the Atmel SAM3U-EK development board.
config ARCH_BOARD_SAM4CMP_DB
bool "Atmel SAM4CMP-DB development board"
depends on ARCH_CHIP_ATSAM4CMP16B
---help---
The port of NuttX to the Atmel SAM4CMP-DB development board.
config ARCH_BOARD_SAM4EEK
bool "Atmel SAM4E-EK development board"
depends on ARCH_CHIP_ATSAM4E16E
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
select ARCH_PHY_INTERRUPT
---help---
The port of NuttX to the Atmel SAM4E-EK development board. This
board features the SAM4E16 MCU running at up to 120MHz.
config ARCH_BOARD_SAM4L_XPLAINED
bool "Atmel SAM4L-Xplained Pro development board"
depends on ARCH_CHIP_ATSAM4LC4C
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
The port of NuttX to the Atmel SAM4L-Xplained Pro development board.
config ARCH_BOARD_SAM4S_XPLAINED
bool "Atmel SAM4S-Xplained development board"
depends on ARCH_CHIP_ATSAM4S16C
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
The port of NuttX to the Atmel SAM4S-Xplained development board.
config ARCH_BOARD_SAM4S_XPLAINED_PRO
bool "Atmel SAM4S-Xplained Pro development board"
depends on ARCH_CHIP_ATSAM4SD32C
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
The port of NuttX to the Atmel SAM4S-Xplained Pro development board.
config ARCH_BOARD_SAME70_QMTECH
bool "Atmel SAME70 evaluation board from QMTECH"
depends on ARCH_CHIP_SAME70N19
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
The port of NuttX to the Atmel SAME70 evaluation board from QMTECH.
config ARCH_BOARD_SAME70_XPLAINED
bool "Atmel SAME70 Xplained evaluation board"
depends on ARCH_CHIP_SAME70Q21
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
select ARCH_PHY_INTERRUPT
---help---
The port of NuttX to the Atmel SAME70 Xplained evaluation board.
config ARCH_BOARD_SAMV71_XULT
bool "Atmel SAMV71 Xplained Ultra evaluation board"
depends on ARCH_CHIP_SAMV71Q21
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
select ARCH_PHY_INTERRUPT
---help---
The port of NuttX to the Atmel SAMV71 Xplained Ultra evaluation board.
config ARCH_BOARD_SHENZHOU
bool "Shenzhou STM32F107 board"
depends on ARCH_CHIP_STM32F107VC
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
This port uses the Shenzhou STM32 F107 board and a GNU arm-nuttx-elf toolchain* under
Linux or Cygwin. See the http://www.armjishu.com for further information. This
board features the STMicro STM32F107VC MCU
config ARCH_BOARD_SKP16C26
bool "Renesas SKP16C26 StarterKit"
depends on ARCH_CHIP_M30262F8
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
---help---
Renesas M16C processor on the Renesas SKP16C26 StarterKit. This port
uses the GNU m32c toolchain. STATUS: The port is complete but untested
due to issues with compiler internal errors.
config ARCH_BOARD_PHOTON
bool "Photon wifi board"
depends on ARCH_CHIP_STM32F205RG
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
A configuration for the Photon from Particle Devices
(https://www.particle.io). This board features the STM32F205RGY6
MCU from STMicro.
config ARCH_BOARD_PNEV5180B
bool "NXP PNEV5180B NFC Frontend Development Kit"
depends on ARCH_CHIP_LPC1769
select ARCH_HAVE_LEDS
---help---
NXP Semiconductors' PN5180 NFC Frontend Development Kit. This board is
based on the NXP LPC1769 MCU.
config ARCH_BOARD_STM32_BUTTERFLY2
bool "Kamami STM32Butterfly2 development board"
depends on ARCH_CHIP_STM32F107VC
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
---help---
A configuration for the Kamami STM32Butterfly2 development board
based on STM32F107VC micro-controller chip with optional ETH
board. See
https://kamami.pl/zestawy-uruchomieniowe-stm32/178507-stm32butterfly2.html
config ARCH_BOARD_STM32_TINY
bool "STM32-Tiny board"
depends on ARCH_CHIP_STM32F103C8
select ARCH_HAVE_LEDS
---help---
A configuration for the STM32 Tiny board. This board is based on a
STM32F103C8T6 micro-controller chip, and is (always ?) bundled with
an nRF24L01+ wireless module.
config ARCH_BOARD_STM32F103_MINIMUM
bool "STM32F103C8T6 Minimum ARM Development Board"
depends on ARCH_CHIP_STM32F103C8
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
A configuration for the STM32F103 Minimum board.
config ARCH_BOARD_STM32F411_MINIMUM
bool "STM32F411CEU6 Minimum ARM Development Board"
depends on ARCH_CHIP_STM32F411CE
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
A configuration for the STM32F411 Minimum board.
config ARCH_BOARD_STM3210E_EVAL
bool "STMicro STM3210E-EVAL development board"
depends on ARCH_CHIP_STM32F103ZE
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
STMicro STM3210E-EVAL development board based on the STMicro STM32F103ZET6
microcontroller (ARM Cortex-M3). This port uses the GNU Cortex-M3
toolchain.
config ARCH_BOARD_STM3220G_EVAL
bool "STMicro STM3220G-EVAL development board"
depends on ARCH_CHIP_STM32F207IG
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
STMicro STM3220G-EVAL development board based on the STMicro STM32F407IG
microcontroller (ARM Cortex-M3).
config ARCH_BOARD_STM3240G_EVAL
bool "STMicro STM3240G-EVAL development board"
depends on ARCH_CHIP_STM32F407IG
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
STMicro STM3240G-EVAL development board based on the STMicro STM32F103ZET6
microcontroller (ARM Cortex-M4 with FPU). This port uses a GNU Cortex-M4
toolchain (such as CodeSourcery).
config ARCH_BOARD_STM32L0538_DISCO
bool "STMicro STM32L0538-Disco board"
depends on ARCH_CHIP_STM32L053C8
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
STMicro STM32L0538-Disco board based on the STMicro STM32L053C8 MCU.
config ARCH_BOARD_STM32F051_DISCOVERY
bool "STMicro STM32F051-Discovery board"
depends on ARCH_CHIP_STM32F051R8
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
STMicro STM32F051-Discovery board based on the STMicro STM32F051R8 MCU.
config ARCH_BOARD_STM32F072_DISCOVERY
bool "STMicro STM32F072-Discovery board"
depends on ARCH_CHIP_STM32F072RB
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
STMicro STM32F072-Discovery board based on the STMicro STM32F072RB MCU.
config ARCH_BOARD_STM32F3_DISCOVERY
bool "STMicro STM32F3-Discovery board"
depends on ARCH_CHIP_STM32F303VC
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
STMicro STM32F3-Discovery board based on the STMicro STM32F303VCT6 MCU.
config ARCH_BOARD_STM32F334_DISCO
bool "STMicro STM32F334-Discovery board"
depends on ARCH_CHIP_STM32F334C8
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
STMicro STM32F334-Discovery board based on the STMicro STM32F334C8T6 MCU.
config ARCH_BOARD_OMNIBUSF4
bool "OMNIBUSF4 flight controller"
depends on ARCH_CHIP_STM32F405RG
select ARCH_HAVE_LEDS
---help---
Flight controllers compatible with the OMINBUSF4 Betaflight target
config ARCH_BOARD_STM32F4_DISCOVERY
bool "STMicro STM32F4-Discovery board"
depends on ARCH_CHIP_STM32F407VG
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
STMicro STM32F4-Discovery board based on the STMicro STM32F407VGT6 MCU.
config ARCH_BOARD_STM32F411E_DISCO
bool "STMicro STM32F411E-Discovery board"
depends on ARCH_CHIP_STM32F411VE
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
This is a minimal configuration that supports low-level test of the
STMicro STM32F411E-Discovery Board.
config ARCH_BOARD_STM32F429I_DISCO
bool "STMicro STM32F429I-Discovery board"
depends on ARCH_CHIP_STM32F429Z
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
STMicro STM32F429I-Discovery board based on the STMicro STM32F429ZIT6 MCU.
config ARCH_BOARD_STM32F746G_DISCO
bool "STMicro STM32F746G-Discovery board"
depends on ARCH_CHIP_STM32F746NG
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
STMicro STM32F746G-DISCO development board featuring the STM32F746NGH6
MCU. The STM32F746NGH6 is a 216MHz Cortex-M7 operation with 1024Kb Flash
memory and 320Kb SRAM.
config ARCH_BOARD_STM32F769I_DISCO
bool "STMicro STM32F769I-Discovery board"
depends on ARCH_CHIP_STM32F769NI
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
STMicro STM32F769I-DISCO development board featuring the STM32F769NIH6
MCU. The STM32F769NIH6 is a 216MHz Cortex-M7 with 2048Kb Flash
memory and 512Kb SRAM.
config ARCH_BOARD_STEVAL_ETH001V1
bool "STMicro STEVAL-ETH001V1 board"
depends on ARCH_CHIP_STM32F767ZI
---help---
The STMicro STEVAL-ETH001V1 servo drive evaluation board featuring
the STM32F767ZI MCU.
config ARCH_BOARD_STM32H747I_DISCO
bool "STMicro STM32H747I-DISCO board"
depends on ARCH_CHIP_STM32H747XI
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
STMicro STM32H747I-DISCO development board featuring the STM32H747XIH6
MCU. The STM32H747XIH6 is a dual core (480MHz Cortex-M7, 240MHz Cortex-M4)
with 2048Kb Flash memory and 1024Kb SRAM.
config ARCH_BOARD_STM32F746_WS
bool "Waveshare STM32F746 board"
depends on ARCH_CHIP_STM32F746IG
---help---
Waveshare STM32F746 development board featuring the STM32F746IG MCU.
config ARCH_BOARD_MEADOW_F7MICRO
bool "Meadow F7 Micro board"
depends on ARCH_CHIP_STM32F777ZI
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
Meadow board powered by STM32F777ZI
config ARCH_BOARD_B_G474E_DPOW1
bool "ST Micro B-G474E-DPOW1 Discovery Kit"
depends on ARCH_CHIP_STM32G474R
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
---help---
ST Micro B-G474E-DPOW1 Discovery Kit, based on the STM32G474RET6
MCU, a Cortex-M4 with FPU, 170 MHz, 128 KB SRAM, 512 KB code.
See boards/arm/stm32/b-g474e-dpow1/README.txt.
config ARCH_BOARD_B_G431B_ESC1
bool "ST Micro B-G431B-ESC1 Discovery Kit"
depends on ARCH_CHIP_STM32G431C
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
ST Micro B-G431B-ESC1 Discovery Kit, based on the STM32G431CB
MCU, a Cortex-M4 with FPU, 170 MHz, 32 KB SRAM, 128 KB code.
config ARCH_BOARD_NUCLEO_G431KB
bool "STM32G431KB Nucleo G431KB"
depends on ARCH_CHIP_STM32G431K
select ARCH_HAVE_LEDS
---help---
STMicro Nucleo-G431KB board based on the STMicro STM32G431KB MCU.
config ARCH_BOARD_NUCLEO_G431RB
bool "STM32G431RB Nucleo G431RB"
depends on ARCH_CHIP_STM32G431R
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
STMicro Nucleo-G431RB board based on the STMicro STM32G431RB MCU.
config ARCH_BOARD_NUCLEO_G474RE
bool "ST Micro Nucleo G474RE"
depends on ARCH_CHIP_STM32G474R
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
---help---
STMicro Nucleo-G474RE board based on the STMicro STM32G474RET6
MCU, a Cortex-M4 with FPU, 170 MHz, 128 KB SRAM, 512 KB code.
See boards/arm/stm32/nucleo-g474re/README.txt.
config ARCH_BOARD_B_L072Z_LRWAN1
bool "B-L072Z-LRWAN1"
depends on ARCH_CHIP_STM32L072CZ
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
STMicro STM32L0 Discovery kit with LoRa/SigFox based on STM32L072CZ MCU.
config ARCH_BOARD_B_L475E_IOT01A
bool "STMicro IoT Discovery kit (B-L475E-IOT01A)"
depends on ARCH_CHIP_STM32L475VG
select ARCH_HAVE_LEDS
---help---
STMicro IoT development board featuring the STM32L475VG
MCU. The STM32L475VG is a Cortex-M4 optimised for low-power operation
at up to 80MHz operation with 1024Kb Flash memory and 96+32Kb SRAM.
config ARCH_BOARD_B_U585I_IOT02A
bool "STMicro IoT Discovery kit (B-U585-IOT02A)"
depends on ARCH_CHIP_STM32U585AI
---help---
STMicro IoT development board featuring the STM32U585AI
MCU. The STM32U585AI is a Cortex-M33 optimised for low-power operation
at up to 160MHz operation with 2048Kb Flash memory and 768Kb SRAM.
config ARCH_BOARD_NUCLEO_U5A5ZJ_Q
bool "STMicro NUCLEO-U5A5ZJ-Q board"
depends on ARCH_CHIP_STM32U5A5ZJT
---help---
STMicro development board featuring the STM32U5A5
MCU. The STM32U5A5 is a Cortex-M33 optimised for low-power operation
at up to 160MHz operation with 4MB Flash memory and 2.5MB SRAM.
config ARCH_BOARD_STM32L476VG_DISCO
bool "STMicro STM32L476VG -Discovery board"
depends on ARCH_CHIP_STM32L476RG
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
STMicro STM32L476VG_DISCO development board featuring the STM32L476VG
MCU. The STM32L476VG is a Cortex-M4 optimised for low-power operation
at up to 80MHz operation with 1024Kb Flash memory and 96+32Kb SRAM.
config ARCH_BOARD_STM32L4R9AI_DISCO
bool "STMicro STM32L4R9AI -Discovery board"
depends on ARCH_CHIP_STM32L4R9AI
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
STMicro STM32L4R9AI_DISCO development board featuring the STM32L4R9AI
MCU. The STM32L4R9AI is a Cortex-M4 optimised for low-power operation
at up to 120MHz operation with 2048Kb Flash memory and 192+64+384Kb SRAM.
config ARCH_BOARD_STM32L476_MDK
bool "Motorola Mods Development Kit (MDK)"
depends on ARCH_CHIP_STM32L476RG
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
Motorola Mods Development Board (MDK) features STM32L476ME MCU.
The STM32L476ME is a Cortex-M4 optimised for low-power operation
at up to 80MHz operation with 1024Kb Flash memory and 96+32Kb SRAM.
config ARCH_BOARD_STM32L562E_DK
bool "STM32L562E-DK"
depends on ARCH_CHIP_STM32L562QE
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
STMicro STM32L562E-DK board based on the STMicro STM32L562QEI6 MCU.
config ARCH_BOARD_STM32L_DISCOVERY
bool "STMicro STM32L-Discovery board"
depends on ARCH_CHIP_STM32L152RB || ARCH_CHIP_STM32L152RC
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
STMicro STM32L-Discovery board based on the STMicro STM32L152RBT6 or
STM32L152RCT6 MCUs.
config ARCH_BOARD_STM32VL_DISCOVERY
bool "STMicro STM32VL-Discovery board"
depends on ARCH_CHIP_STM32F100RB
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
STMicro STM32VL-Discovery board based on the STMicro STM32F100RB MCU.
config ARCH_BOARD_MIKROE_STM32F4
bool "MikroElektronika Mikromedia for STM32F4 board"
depends on ARCH_CHIP_STM32F407VG
---help---
This is the port NuttX to the Mikroelektronika Mikromedia for STM32F4 Multimedia Board
(MMB). See http://www.mikroe.com/ for further information.
config ARCH_BOARD_SUREPIC32MX
bool "Sure PIC32MX boards"
depends on ARCH_CHIP_PIC32MX440F512H
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
The "Advanced USB Storage Demo Board," Model DB-DP11215, from Sure
Electronics (http://www.sureelectronics.net/). This board features
the MicroChip PIC32MX440F512H. See also
http://www.sureelectronics.net/goods.php?id=1168 for further
information about the Sure DB-DP11215 board.
config ARCH_BOARD_TEENSY_20
bool "PJRC Teensy++ 2.0 board"
depends on ARCH_CHIP_AT90USB1286
select ARCH_HAVE_LEDS
---help---
This is the port of NuttX to the PJRC Teensy++ 2.0 board. This board is
developed by http://pjrc.com/teensy/. The Teensy++ 2.0 is based
on an Atmel AT90USB1286 MCU.
config ARCH_BOARD_TEENSY_3X
bool "PJRC Teensy++ 3.1 board"
depends on ARCH_CHIP_MK20DX256VLH7 || ARCH_CHIP_MK20DX128VLH5
select ARCH_HAVE_LEDS
---help---
This is the port of NuttX to the PJRC Teensy++ 2.0 board. This board is
developed by http://pjrc.com/teensy/. The Teensy++ 2.0 is based
on an Atmel AT90USB1286 MCU.
This is the port of NuttX to the Teensy-3.1 from PJRC
(https://www.pjrc.com/). The Teensy-3.1 features the Freescale
MK30DX256VLH7 chip (now NXP). The MK30DX256VLH7 is a 64-pin Cortex-M4
running at 72MHz. It has 256KiB of program FLASH memory and 64KiB of
SRAM. For more information about the Teensy 3.1, see
https://www.pjrc.com/teensy/teensy31.html
https://www.pjrc.com/store/teensy31.html
This board configuration can also be used with the older Teensy-3.0. The
Teensy-3.0 has the same schematic (although some pins are not used on the
Teensy-3.0). The primary difference is that the Teensy 3.0 has a
MK20DX128VLH5 with slightly less capability.
config ARCH_BOARD_TEENSY_4X
bool "PJRC Teensy++ 4.x board"
depends on ARCH_CHIP_MIMXRT1062DVL6A
select ARCH_HAVE_LEDS
---help---
This is the port of NuttX to the PJRC Teensy++ 4.x board. This board is
developed by http://pjrc.com/teensy/. The Teensy++ 4.x is based
on an NXP MIMXRT1062DVL6A MCU. The port can support both Teensy 4.0 and
Teensy 4.1 boards.
config ARCH_BOARD_TEENSY_LC
bool "Teensy LC"
depends on ARCH_CHIP_MKL25Z64
select ARCH_HAVE_LEDS
---help---
This is the configuration for the Teensy LC board.
See https://www.pjrc.com/teensy/teensyLC.html. The
Teensy LC is based on the Freescale KL25Z.
config ARCH_BOARD_TM4C123G_LAUNCHPAD
bool "Tiva TM4C123G LaunchPad"
depends on ARCH_CHIP_TM4C123GH6PM
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
Tiva TM4C123G LaunchPad.
config ARCH_BOARD_TM4C1294_LAUNCHPAD
bool "Tiva EK-TM4C1294XL LaunchPad"
depends on ARCH_CHIP_TM4C1294NCPDT
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
Tiva EK-TM4C1294XL LaunchPad.
config ARCH_BOARD_TM4C129E_LAUNCHPAD
bool "Tiva EK-TM4C129EXL Crypto Connected LaunchPad"
depends on ARCH_CHIP_TM4C129ENCPDT
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
Tiva EK-TM4C129EXL Crypto Connected LaunchPad featuring the
TM4C129ENCPDT chip.
config ARCH_BOARD_TMS570LS31X_USB_KIT
bool "TI TMS570LS31X_USB_KIT"
depends on ARCH_CHIP_TMS570LS3137ZWT
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
TI Hercules TMS570LS31xx Evaluation Kit (TMDS570ls31xx USB Kit)
featuring the Hercules TMS570LS3137ZWT chip.
config ARCH_BOARD_TWR_K60N512
bool "FreeScale TWR-K60N512 development board"
depends on ARCH_CHIP_MK60N512VMD100
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
Kinetis K60 Cortex-M4 MCU. This port uses the FreeScale TWR-K60N512
development board.
config ARCH_BOARD_TWR_K64F120M
bool "Freescale TWR-K64F120M development board"
depends on ARCH_CHIP_MK64FN1M0VMD12
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
Kinetis K64 Cortex-M4 MCU. This port uses the Freescale TWR-K64F120M
development board.
config ARCH_BOARD_U_BLOX_C027
bool "u-blox C027"
depends on ARCH_CHIP_LPC1768
select ARCH_HAVE_LEDS
---help---
u-blox GSM and GPS module evaluation board with NXP LPCExpresso
LPC1768. The GSM module is one of LISA-C200, LISA-U200 or SARA-G350.
The GPS module is one of MAX-M7 or MAX-M8.
config ARCH_BOARD_UBW32
bool "UBW32 v2.4 board from Sparkfun"
depends on ARCH_CHIP_PIC32MX460F512L
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
This is the port to the Sparkfun UBW32 board. This port uses the original v2.4
board which is based on the MicroChip PIC32MX460F512L. See
http://www.sparkfun.com/products/8971. This older version has been replaced
with this board http://www.sparkfun.com/products/9713. See also
http://www.schmalzhaus.com/UBW32/.
config ARCH_BOARD_US7032EVB1
bool "Hitachi SH-1/US7032EVB1 board"
depends on ARCH_CHIP_SH7032
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
---help---
This is a port of the Hitachi SH-1 on the Hitachi SH-1/US7032EVB1 board.
STATUS: Work has just began on this port.
config ARCH_BOARD_VIEWTOOL_STM32F107
bool "ViewTool STM32F103/F107"
depends on ARCH_CHIP_STM32F107VC || ARCH_CHIP_STM32F103VC
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
---help---
This port uses the ViewTool STM32F103/F107 V1.2 board. This
board may be fitted with either: (1) STM32F107VCT6 or (2) STM32F103VCT6.
See http://www.viewtool.com/ for further information.
config ARCH_BOARD_XMC4500RELAX
bool "Infineon XMC4500 Relax"
depends on ARCH_CHIP_XMC4500
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
Infineon XMC4500 Relax Lite v1
config ARCH_BOARD_XMC4700RELAX
bool "Infineon XMC4700 Relax"
depends on ARCH_CHIP_XMC4700
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
Infineon XMC4700 Relax
config ARCH_BOARD_XMC4800RELAX
bool "Infineon XMC4800 Relax"
depends on ARCH_CHIP_XMC4800
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
Infineon XMC4800 Relax
config ARCH_BOARD_VERDIN_MX8MP
bool "Toradex Verdin i.MX8MP"
depends on ARCH_CHIP_MX8MP
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
Toradex Verdin i.MX8MP
config ARCH_BOARD_Z16F2800100ZCOG
bool "Zilog Z16F2800100ZCOG Development Kit"
depends on ARCH_CHIP_Z16F2811
select ARCH_HAVE_LEDS
---help---
z16f Microcontroller. This port uses the ZiLOG z16f2800100zcog
development kit and the Zilog ZDS-II Windows command line tools. The
development environment is Cygwin under WinXP.
config ARCH_BOARD_Z20X
bool "z20x"
depends on ARCH_CHIP_EZ80F92
---help---
ez80Acclaim! Microcontroller. This port use the z80x board
based on an eZ80F092 part, and the Zilog ZDS-II Windows command line
tools. The development environment is Cygwin under Windows. A
Windows native development environment is available but has not
been verified.
config ARCH_BOARD_Z80SIM
bool "Z80 Instruction Set Simulator"
depends on ARCH_CHIP_Z80
select UART_SERIALDRIVER
---help---
z80 Microcontroller. This port uses a Z80 instruction set simulator
called z80sim. This port also uses the SDCC toolchain
(http://sdcc.sourceforge.net/") (verified with version 2.6.0).
config ARCH_BOARD_Z8ENCORE000ZCO
bool "ZiLOG Z8ENCORE000ZCO Development Kit"
depends on ARCH_CHIP_Z8F6403
select ARCH_HAVE_LEDS
---help---
z8Encore! Microcontroller. This port use the ZiLOG Z8ENCORE000ZCO
development kit, Z8F6403 part, and the Zilog ZDS-II Windows command line
tools. The development environment is Cygwin under WinXP.
config ARCH_BOARD_Z8F64200100KIT
bool "ZiLOG Z8F64200100KIT Development Kit"
depends on ARCH_CHIP_Z8F6423
select ARCH_HAVE_LEDS
---help---
z8Encore! Microcontroller. This port use the Zilog Z8F64200100KIT
development kit, Z8F6423 part, and the Zilog ZDS-II Windows command line
tools. The development environment is Cygwin under WinXP.
config ARCH_BOARD_ZP214XPA
bool "The0.net LPC2148 Development Board"
depends on ARCH_CHIP_LPC214X
---help---
This port is for the NXP LPC2148 as provided on the The0.net
ZPA213X/4XPA development board. Includes support for the
UG-2864AMBAG01 OLED also from The0.net
config ARCH_BOARD_ZKITARM
bool "Zilogic ZKit-ARM-1769 Development Kit"
depends on ARCH_CHIP_LPC1768
select ARCH_HAVE_LEDS
---help---
Zilogic System's ARM development Kit, ZKIT-ARM-1769. This board is based
on the NXP LPC1769. The NuttX Buildroot toolchain is used by default.
config ARCH_BOARD_SPRESENSE
bool "Sony Spresense Board"
depends on ARCH_CHIP_CXD56XX
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
select ARCH_HAVE_POWEROFF
---help---
none
config ARCH_BOARD_PHY6222
bool "Phyplus PHY6222 EVB Board"
depends on ARCH_CHIP_PHY62XX
---help---
none
config ARCH_BOARD_XX3803
bool "Sparc Bm3803 XX3803 Board"
depends on ARCH_CHIP_BM3803
select ARCH_HAVE_LEDS
---help---
none
config ARCH_BOARD_XX3823
bool "Sparc Bm3823 XX3823 Board"
depends on ARCH_CHIP_BM3823
select ARCH_HAVE_LEDS
---help---
none
config ARCH_BOARD_S698PM_DKIT
bool "Sparc S698pm Dkit Board"
depends on ARCH_CHIP_S698PM
select ARCH_HAVE_LEDS
---help---
none
config ARCH_BOARD_HPM6360EVK
bool "Hpmicro hpm6360evk"
depends on ARCH_CHIP_HPM6360IPA
select ARCH_HAVE_LEDS
---help---
This is the board configuration for the port of NuttX to the Hpmicro hpm6750evk2
board. This board features the RISC-V hpm6340.
config ARCH_BOARD_HPM6750EVK2
bool "Hpmicro hpm6750evk2"
depends on ARCH_CHIP_HPM6750
---help---
This is the board configuration for the port of NuttX to the Hpmicro hpm6750evk2
board. This board features the RISC-V hpm6750.
config ARCH_BOARD_SIM
bool "User mode simulation"
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
depends on ARCH_SIM
---help---
A user-mode port of NuttX to the x86 Linux/Cygwin platform is available.
The purpose of this port is primarily to support OS feature development.
This port does not support interrupts or a real timer (and hence no
round robin scheduler) Otherwise, it is complete.
config ARCH_BOARD_AT32F437_MINI
bool "AT32F437-MINI board"
depends on ARCH_CHIP_AT32F437VM
select ARCH_HAVE_LEDS
---help---
AT32F437-MINI board based on the Artery AT32F437VMT7 MCU.
config ARCH_BOARD_CUSTOM
bool "Custom development board"
---help---
Select this option if there is no directory for the board under boards/.
Don't see the board you want? You must first select the exact MCU part
number, then the boards supporting that part will be available for selection.
endchoice
if ARCH_BOARD_CUSTOM
menu "Custom Board Configuration"
config ARCH_BOARD_CUSTOM_NAME
string "Custom board name"
default ""
---help---
This is a name for the board. It is not used except to return the
information via the NSH uname command.
config ARCH_BOARD_CUSTOM_DIR
string "Custom board directory"
default ""
---help---
If the custom board configuration is selected, then it is necessary
to also tell the build system where it can find the board directory
for the custom board.
In this case, the board directory is assumed to lie outside the
NuttX directory. The provided path must then be a full, absolute
path to some location outside of the NuttX source tree (like
"~/projects/myboard").
config ARCH_BOARD_CUSTOM_DIR_RELPATH
bool "Relative custom board directory"
default y
---help---
Specifies that the board directory is relative to the NuttX directory.
config BOARD_CUSTOM_LEDS
bool "Custom board LEDs"
default n
select ARCH_HAVE_LEDS
config BOARD_CUSTOM_BUTTONS
bool "Custom board buttons"
default n
select ARCH_HAVE_BUTTONS
select ARCH_BUTTONS
config BOARD_CUSTOM_IRQBUTTONS
bool "Custom Board IRQ buttons"
default n
depends on BOARD_CUSTOM_BUTTONS
select ARCH_HAVE_IRQBUTTONS
select ARCH_IRQBUTTONS
config BOARD_CUSTOM_INTERRUPT
bool "Custom board PHY interrupts"
default n
depends on NETDEVICES
select ARCH_PHY_INTERRUPT
endmenu # Custom Board Configuration
endif #ARCH_BOARD_CUSTOM
config ARCH_BOARD
string
default "amber" if ARCH_BOARD_AMBER
default "arduino-mega2560" if ARCH_BOARD_ARDUINO_MEGA2560
default "arduino-due" if ARCH_BOARD_ARDUINO_DUE
default "arduino-m0" if ARCH_BOARD_ARDUINO_M0
default "arduino-nano-33ble" if ARCH_BOARD_ARDUINO_NANO_33BLE
default "arduino-nano-33ble-rev2" if ARCH_BOARD_ARDUINO_NANO_33BLE_REV2
default "arty_a7" if ARCH_BOARD_ARTY_A7
default "avr32dev1" if ARCH_BOARD_AVR32DEV1
default "axoloti" if ARCH_BOARD_AXOLOTI
default "bambino-200e" if ARCH_BOARD_BAMBINO_200E
default "bl602evb" if ARCH_BOARD_BL602EVB
default "c5471evm" if ARCH_BOARD_C5471EVM
default "circuit-express" if ARCH_BOARD_CIRCUIT_EXPRESS
default "clicker2-stm32" if ARCH_BOARD_CLICKER2_STM32
default "cloudctrl" if ARCH_BOARD_CLOUDCTRL
default "demo9s12ne64" if ARCH_BOARD_DEMOS92S12NEC64
default "dk-tm4c129x" if ARCH_BOARD_DK_TM4C129X
default "ea3131" if ARCH_BOARD_EA3131
default "ea3152" if ARCH_BOARD_EA3152
default "eagle100" if ARCH_BOARD_EAGLE100
default "efm32-g8xx-stk" if ARCH_BOARD_EFM32G8XXSTK
default "efm32gg-stk3700" if ARCH_BOARD_EFM32GG_STK3700
default "ekk-lm3s9b96" if ARCH_BOARD_EKKLM3S9B96
default "emw3162" if ARCH_BOARD_EMW3162
default "quickfeather" if ARCH_BOARD_QUICKFEATHER
default "esp32-audio-kit" if ARCH_BOARD_ESP32_AUDIO_KIT
default "esp32-devkitc" if ARCH_BOARD_ESP32_DEVKITC
default "ttgo_eink5_v2" if ARCH_BOARD_TTGO_T5V2_ESP32
default "esp32-ethernet-kit" if ARCH_BOARD_ESP32_ETHERNETKIT
default "esp32-lyrat" if ARCH_BOARD_ESP32_LYRAT
default "esp32-pico-kit" if ARCH_BOARD_ESP32_PICO_KIT
default "esp32-sparrow-kit" if ARCH_BOARD_ESP32_SPARROWKIT
default "esp32-wrover-kit" if ARCH_BOARD_ESP32_WROVERKIT
default "esp32-2432S028" if ARCH_BOARD_ESP32_2432S028
default "esp32c3-devkit" if ARCH_BOARD_ESP32C3_DEVKIT
default "esp32c3-devkit-rust-1" if ARCH_BOARD_ESP32C3_DEVKIT_RUST1
default "esp32c3-generic" if ARCH_BOARD_ESP32C3_GENERIC
default "esp32s2-kaluga-1" if ARCH_BOARD_ESP32S2_KALUGA_1
default "esp32s2-saola-1" if ARCH_BOARD_ESP32S2_SAOLA_1
default "franzininho-wifi" if ARCH_BOARD_FRANZININHO_WIFI
default "esp32s3-devkit" if ARCH_BOARD_ESP32S3_DEVKIT
default "esp32s3-eye" if ARCH_BOARD_ESP32S3_EYE
default "esp32s3-meadow" if ARCH_BOARD_ESP32S3_MEADOW
default "esp32s3-lcd-ev" if ARCH_BOARD_ESP32S3_LCD_EV
default "esp32s3-box" if ARCH_BOARD_ESP32S3_BOX
default "esp32c6-devkit" if ARCH_BOARD_ESP32C6_DEVKIT
default "esp32h2-devkit" if ARCH_BOARD_ESP32H2_DEVKIT
default "et-stm32-stamp" if ARCH_BOARD_ET_STM32_STAMP
default "tlsr8278adk80d" if ARCH_BOARD_TLSR8278ADK80D
default "ez80f910200kitg" if ARCH_BOARD_EZ80F910200KITG
default "ez80f910200zco" if ARCH_BOARD_EZ80F910200ZCO
default "fire-stm32v2" if ARCH_BOARD_FIRE_STM32
default "chipkit-wifire" if ARCH_BOARD_CHIPKIT_WIFIRE
default "flipnclick-pic32mz" if ARCH_BOARD_FLIPNCLICK_PIC32MZ
default "flipnclick-sam3x" if ARCH_BOARD_FLIPNCLICK_SAM3X
default "freedom-k28f" if ARCH_BOARD_FREEDOM_K28F
default "freedom-k64f" if ARCH_BOARD_FREEDOM_K64F
default "freedom-k66f" if ARCH_BOARD_FREEDOM_K66F
default "freedom-kl25z" if ARCH_BOARD_FREEDOM_KL25Z
default "freedom-kl26z" if ARCH_BOARD_FREEDOM_KL26Z
default "gd32f450zk-eval" if ARCH_BOARD_GD32F450ZK_EVAL
default "gd32f470zk-eval" if ARCH_BOARD_GD32F470ZK_EVAL
default "gd32f470ik-eval" if ARCH_BOARD_GD32F470IK_EVAL
default "hifive1-revb" if ARCH_BOARD_HIFIVE1_REVB
default "hymini-stm32v" if ARCH_BOARD_HYMINI_STM32V
default "imxrt1020-evk" if ARCH_BOARD_IMXRT1020_EVK
default "imxrt1050-evk" if ARCH_BOARD_IMXRT1050_EVK
default "imxrt1060-evk" if ARCH_BOARD_IMXRT1060_EVK
default "imxrt1064-evk" if ARCH_BOARD_IMXRT1064_EVK
default "imxrt1170-evk" if ARCH_BOARD_IMXRT1170_EVK
default "kwikstik-k40" if ARCH_BOARD_KWIKSTIK_K40
default "launchxl-cc1310" if ARCH_BOARD_LAUNCHXL_CC1310
default "launchxl-cc1312r1" if ARCH_BOARD_LAUNCHXL_CC1312R1
default "launchxl-tms57004" if ARCH_BOARD_LAUNCHXL_TMS57004
default "lc823450-xgevk" if ARCH_BOARD_LC823450_XGEVK
default "lincoln60" if ARCH_BOARD_LINCOLN60
default "lm3s6432-s2e" if ARCH_BOARD_LM3S6432S2E
default "lm3s6965-ek" if ARCH_BOARD_LM3S6965EK
default "lm3s8962-ek" if ARCH_BOARD_LM3S8962EK
default "lm4f120-launchpad" if ARCH_BOARD_LM4F120_LAUNCHPAD
default "lpc4088-devkit" if ARCH_BOARD_LPC4088_DEVKIT
default "lpc4088-quickstart" if ARCH_BOARD_LPC4088_QUICKSTART
default "lpc4330-xplorer" if ARCH_BOARD_LPC4330_XPLORER
default "lpc4337-ws" if ARCH_BOARD_LPC4337_WS
default "lpc4357-evb" if ARCH_BOARD_LPC4357_EVB
default "lpc4370-link2" if ARCH_BOARD_LPC4370_LINK2
default "lpcxpresso-lpc1768" if ARCH_BOARD_LPCXPRESSO
default "lpcxpresso-lpc54628" if ARCH_BOARD_LPCXPRESSO_LPC54628
default "lx_cpu" if ARCH_BOARD_LX_CPU
default "maix-bit" if ARCH_BOARD_MAIX_BIT
default "smartl-c906" if ARCH_BOARD_SMARTL_C906
default "icicle" if ARCH_BOARD_ICICLE_MPFS
default "m100pfsevp" if ARCH_BOARD_M100PFSEVP_MPFS
default "maple" if ARCH_BOARD_MAPLE
default "makerlisp" if ARCH_BOARD_MAKERLISP
default "max32660-evsys" if ARCH_BOARD_MAX32660_EVSYS
default "mbed" if ARCH_BOARD_MBED
default "mcb1700" if ARCH_BOARD_MCB1700
default "mcu123-lpc214x" if ARCH_BOARD_MCU123_LPC214X
default "mega1284p-xplained" if ARCH_BOARD_MEGA1284P_XPLAINED
default "metro-m4" if ARCH_BOARD_METRO_M4
default "micropendous3" if ARCH_BOARD_MICROPENDOUS3
default "mirtoo" if ARCH_BOARD_MIRTOO
default "misoc" if ARCH_BOARD_MISOC_QEMU || ARCH_BOARD_MISOC_VERILATOR
default "moteino-mega" if ARCH_BOARD_MOTEINO_MEGA
default "ne64badge" if ARCH_BOARD_NE64BADGE
default "nrf52-feather" if ARCH_BOARD_NRF52_FEATHER
default "nrf52832-sparkfun" if ARCH_BOARD_NRF52832_SPARKFUN
default "nrf52832-mdk" if ARCH_BOARD_NRF52832_MDK
default "nrf52832-dk" if ARCH_BOARD_NRF52832_DK
default "nrf52840-dk" if ARCH_BOARD_NRF52840_DK
default "nrf52840-dongle" if ARCH_BOARD_NRF52840_DONGLE
default "thingy52" if ARCH_BOARD_THINGY52
default "nrf5340-dk" if ARCH_BOARD_NRF5340_DK
default "nrf5340-audio-dk" if ARCH_BOARD_NRF5340_AUDIO_DK
default "thingy53" if ARCH_BOARD_THINGY53
default "nrf9160-dk" if ARCH_BOARD_NRF9160_DK
default "thingy91" if ARCH_BOARD_THINGY91
default "thingy91-nrf52" if ARCH_BOARD_THINGY91_NRF52
default "nrf9160-dk-nrf52" if ARCH_BOARD_NRF9160_DK_NRF52
default "ntosd-dm320" if ARCH_BOARD_NTOSD_DM320
default "nucleo-144" if ARCH_BOARD_NUCLEO_144
default "nucleo-f072rb" if ARCH_BOARD_NUCLEO_F072RB
default "nucleo-f091rc" if ARCH_BOARD_NUCLEO_F091RC
default "nucleo-f103rb" if ARCH_BOARD_NUCLEO_F103RB
default "nucleo-f207zg" if ARCH_BOARD_NUCLEO_F207ZG
default "nucleo-f302r8" if ARCH_BOARD_NUCLEO_F302R8
default "nucleo-f303re" if ARCH_BOARD_NUCLEO_F303RE
default "nucleo-f303ze" if ARCH_BOARD_NUCLEO_F303ZE
default "nucleo-f334r8" if ARCH_BOARD_NUCLEO_F334R8
default "nucleo-f4x1re" if ARCH_BOARD_NUCLEO_F401RE || ARCH_BOARD_NUCLEO_F411RE
default "stm32f401rc-rs485" if ARCH_BOARD_STM32F401RC_RS485
default "nucleo-f429zi" if ARCH_BOARD_NUCLEO_F429ZI
default "nucleo-f446re" if ARCH_BOARD_NUCLEO_F446RE
default "nucleo-f410rb" if ARCH_BOARD_NUCLEO_F410RB
default "nucleo-f412zg" if ARCH_BOARD_NUCLEO_F412ZG
default "stm32g071b-disco" if ARCH_BOARD_STM32G071B_DISCO
default "nucleo-g070rb" if ARCH_BOARD_NUCLEO_G070RB
default "nucleo-g071rb" if ARCH_BOARD_NUCLEO_G071RB
default "nucleo-h743zi" if ARCH_BOARD_NUCLEO_H743ZI
default "nucleo-h743zi2" if ARCH_BOARD_NUCLEO_H743ZI2
default "nucleo-h745zi" if ARCH_BOARD_NUCLEO_H745ZI
default "stm32h745i-disco" if ARCH_BOARD_STM32H745I_DISCO
default "linum-stm32h753bi" if ARCH_BOARD_LINUM_STM32H753BI
default "nucleo-l073rz" if ARCH_BOARD_NUCLEO_L073RZ
default "nucleo-l152re" if ARCH_BOARD_NUCLEO_L152RE
default "nucleo-l432kc" if ARCH_BOARD_NUCLEO_L432KC
default "nucleo-l452re" if ARCH_BOARD_NUCLEO_L452RE
default "nucleo-l476rg" if ARCH_BOARD_NUCLEO_L476RG
default "steval-stlcs01v1" if ARCH_BOARD_STEVAL_STLCS01V1
default "nucleo-l496zg" if ARCH_BOARD_NUCLEO_L496ZG
default "nucleo-l552ze" if ARCH_BOARD_NUCLEO_L552ZE
default "flipperzero" if ARCH_BOARD_FLIPPERZERO
default "nucleo-wb55rg" if ARCH_BOARD_NUCLEO_WB55RG
default "nucleo-wl55jc" if ARCH_BOARD_NUCLEO_WL55JC
default "nutiny-nuc120" if ARCH_BOARD_NUTINY_NUC120
default "olimex-efm32g880f128-stk" if ARCH_BOARD_OLIMEX_EFM32G880F128_STK
default "olimex-lpc1766stk" if ARCH_BOARD_LPC1766STK
default "olimex-lpc2378" if ARCH_BOARD_OLIMEXLPC2378
default "olimex-lpc-h3131" if ARCH_BOARD_OLIMEX_LPC_H3131
default "olimex-stm32-h405" if ARCH_BOARD_OLIMEX_STM32H405
default "olimex-stm32-h407" if ARCH_BOARD_OLIMEX_STM32H407
default "olimex-stm32-e407" if ARCH_BOARD_OLIMEX_STM32E407
default "olimex-stm32-p107" if ARCH_BOARD_OLIMEX_STM32P107
default "olimex-stm32-p207" if ARCH_BOARD_OLIMEX_STM32P207
default "olimex-stm32-p407" if ARCH_BOARD_OLIMEX_STM32P407
default "olimex-strp711" if ARCH_BOARD_OLIMEX_STRP711
default "odrive36" if ARCH_BOARD_ODRIVE36
default "olimexino-stm32" if ARCH_BOARD_OLIMEXINO_STM32
default "omnibusf4" if ARCH_BOARD_OMNIBUSF4
default "open1788" if ARCH_BOARD_OPEN1788
default "or1k" if ARCH_BOARD_OR1K
default "p112" if ARCH_BOARD_P112
default "pcduino-a10" if ARCH_BOARD_PCDUINO_A10
default "beaglebone-black" if ARCH_BOARD_BEAGLEBONE_BLACK
default "pic32mx-starterkit" if ARCH_BOARD_PIC32MX_STARTERKIT
default "pic32mx7mmb" if ARCH_BOARD_PIC32MX7MMB
default "pic32mz-starterkit" if ARCH_BOARD_PIC32MZ_STARTERKIT
default "qemu-i486" if ARCH_BOARD_QEMU_I486
default "intel64-qemu" if ARCH_BOARD_INTEL64_QEMU
default "raspberrypi-pico" if ARCH_BOARD_RASPBERRYPI_PICO
default "raspberrypi-pico-w" if ARCH_BOARD_RASPBERRYPI_PICO_W
default "pimoroni-tiny2040" if ARCH_BOARD_PIMORONI_TINY2040
default "adafruit-feather-rp2040" if ARCH_BOARD_ADAFRUIT_FEATHER_RP2040
default "seeed-xiao-rp2040" if ARCH_BOARD_SEEED_XIAO_RP2040
default "adafruit-kb2040" if ARCH_BOARD_ADAFRUIT_KB2040
default "adafruit-qt-py-rp2040" if ARCH_BOARD_ADAFRUIT_QT_PY_RP2040
default "waveshare-rp2040-lcd-1.28" if ARCH_BOARD_WAVESHARE_RP2040_LCD_1_28
default "rx65n" if ARCH_BOARD_RX65N
default "rx65n-rsk1mb" if ARCH_BOARD_RX65N_RSK1MB
default "rx65n-rsk2mb" if ARCH_BOARD_RX65N_RSK2MB
default "rx65n-grrose" if ARCH_BOARD_RX65N_GRROSE
default "s32k118evb" if ARCH_BOARD_S32K118EVB
default "s32k144evb" if ARCH_BOARD_S32K144EVB
default "rddrone-bms772" if ARCH_BOARD_RDDRONE_BMS772
default "s32k146evb" if ARCH_BOARD_S32K146EVB
default "ucans32k146" if ARCH_BOARD_UCANS32K146
default "s32k148evb" if ARCH_BOARD_S32K148EVB
default "s32k344evb" if ARCH_BOARD_S32K344EVB
default "mr-canhubk3" if ARCH_BOARD_MR_CANHUBK3
default "rv32m1-vega" if ARCH_BOARD_RV32M1_VEGA
default "rv-virt" if ARCH_BOARD_QEMU_RV_VIRT
default "star64" if ARCH_BOARD_JH7110_STAR64
default "canmv230" if ARCH_BOARD_K230_CANMV
default "ox64" if ARCH_BOARD_BL808_OX64
default "sabre-6quad" if ARCH_BOARD_SABRE_6QUAD
default "tc397" if ARCH_BOARD_TC397
default "qemu-armv7a" if ARCH_BOARD_QEMU_ARMV7A
default "qemu-armv8a" if ARCH_BOARD_QEMU_ARMV8A
default "pinephone" if ARCH_BOARD_PINEPHONE
default "pinephonepro" if ARCH_BOARD_PINEPHONE_PRO
default "nanopi_m4" if ARCH_BOARD_NANOPI_M4
default "fvp-armv8r" if ARCH_BOARD_FVP_ARMV8R
default "fvp-armv8r-aarch32" if ARCH_BOARD_FVP_ARMV8R_AARCH32
default "imx8qm-mek" if ARCH_BOARD_IMX8QM_MEK
default "sama5d2-xult" if ARCH_BOARD_SAMA5D2_XULT
default "giant-board" if ARCH_BOARD_GIANT_BOARD
default "jupiter-nano" if ARCH_BOARD_JUPITER_NANO
default "sama5d3x-ek" if ARCH_BOARD_SAMA5D3X_EK
default "sama5d3-xplained" if ARCH_BOARD_SAMA5D3_XPLAINED
default "sama5d4-ek" if ARCH_BOARD_SAMA5D4_EK
default "samd20-xplained" if ARCH_BOARD_SAMD20_XPLAINED
default "samd21-xplained" if ARCH_BOARD_SAMD21_XPLAINED
default "same54-xplained-pro" if ARCH_BOARD_SAME54_XPLAINED_PRO
default "saml21-xplained" if ARCH_BOARD_SAML21_XPLAINED
default "sam3u-ek" if ARCH_BOARD_SAM3UEK
default "sam4cmp-db" if ARCH_BOARD_SAM4CMP_DB
default "sam4e-ek" if ARCH_BOARD_SAM4EEK
default "sam4l-xplained" if ARCH_BOARD_SAM4L_XPLAINED
default "sam4s-xplained" if ARCH_BOARD_SAM4S_XPLAINED
default "sam4s-xplained-pro" if ARCH_BOARD_SAM4S_XPLAINED_PRO
default "same70-qmtech" if ARCH_BOARD_SAME70_QMTECH
default "same70-xplained" if ARCH_BOARD_SAME70_XPLAINED
default "samv71-xult" if ARCH_BOARD_SAMV71_XULT
default "shenzhou" if ARCH_BOARD_SHENZHOU
default "skp16c26" if ARCH_BOARD_SKP16C26
default "photon" if ARCH_BOARD_PHOTON
default "pnev5180b" if ARCH_BOARD_PNEV5180B
default "stm32butterfly2" if ARCH_BOARD_STM32_BUTTERFLY2
default "stm32_tiny" if ARCH_BOARD_STM32_TINY
default "stm32l0538-disco" if ARCH_BOARD_STM32L0538_DISCO
default "stm32f051-discovery" if ARCH_BOARD_STM32F051_DISCOVERY
default "stm32f072-discovery" if ARCH_BOARD_STM32F072_DISCOVERY
default "stm32f103-minimum" if ARCH_BOARD_STM32F103_MINIMUM
default "stm32f411-minimum" if ARCH_BOARD_STM32F411_MINIMUM
default "stm3210e-eval" if ARCH_BOARD_STM3210E_EVAL
default "stm3220g-eval" if ARCH_BOARD_STM3220G_EVAL
default "stm3240g-eval" if ARCH_BOARD_STM3240G_EVAL
default "stm32f3discovery" if ARCH_BOARD_STM32F3_DISCOVERY
default "stm32f334-disco" if ARCH_BOARD_STM32F334_DISCO
default "stm32f4discovery" if ARCH_BOARD_STM32F4_DISCOVERY
default "stm32f411e-disco" if ARCH_BOARD_STM32F411E_DISCO
default "stm32f429i-disco" if ARCH_BOARD_STM32F429I_DISCO
default "stm32f746g-disco" if ARCH_BOARD_STM32F746G_DISCO
default "stm32f769i-disco" if ARCH_BOARD_STM32F769I_DISCO
default "steval-eth001v1" if ARCH_BOARD_STEVAL_ETH001V1
default "stm32h747i-disco" if ARCH_BOARD_STM32H747I_DISCO
default "stm32f746-ws" if ARCH_BOARD_STM32F746_WS
default "stm32f777zit6-meadow" if ARCH_BOARD_MEADOW_F7MICRO
default "b-g474e-dpow1" if ARCH_BOARD_B_G474E_DPOW1
default "b-g431b-esc1" if ARCH_BOARD_B_G431B_ESC1
default "nucleo-g431kb" if ARCH_BOARD_NUCLEO_G431KB
default "nucleo-g431rb" if ARCH_BOARD_NUCLEO_G431RB
default "nucleo-g474re" if ARCH_BOARD_NUCLEO_G474RE
default "b-l072z-lrwan1" if ARCH_BOARD_B_L072Z_LRWAN1
default "b-l475e-iot01a" if ARCH_BOARD_B_L475E_IOT01A
default "b-u585i-iot02a" if ARCH_BOARD_B_U585I_IOT02A
default "nucleo-u5a5zj-q" if ARCH_BOARD_NUCLEO_U5A5ZJ_Q
default "stm32l476vg-disco" if ARCH_BOARD_STM32L476VG_DISCO
default "stm32l476-mdk" if ARCH_BOARD_STM32L476_MDK
default "stm32l4r9ai-disco" if ARCH_BOARD_STM32L4R9AI_DISCO
default "stm32l562e-dk" if ARCH_BOARD_STM32L562E_DK
default "stm32ldiscovery" if ARCH_BOARD_STM32L_DISCOVERY
default "stm32vldiscovery" if ARCH_BOARD_STM32VL_DISCOVERY
default "mikroe-stm32f4" if ARCH_BOARD_MIKROE_STM32F4
default "sure-pic32mx" if ARCH_BOARD_SUREPIC32MX
default "teensy-2.0" if ARCH_BOARD_TEENSY_20
default "teensy-3.x" if ARCH_BOARD_TEENSY_3X
default "teensy-4.x" if ARCH_BOARD_TEENSY_4X
default "teensy-lc" if ARCH_BOARD_TEENSY_LC
default "tm4c123g-launchpad" if ARCH_BOARD_TM4C123G_LAUNCHPAD
default "tm4c1294-launchpad" if ARCH_BOARD_TM4C1294_LAUNCHPAD
default "tm4c129e-launchpad" if ARCH_BOARD_TM4C129E_LAUNCHPAD
default "tms570ls31x-usb-kit" if ARCH_BOARD_TMS570LS31X_USB_KIT
default "lilygo_tbeam_lora_gps" if ARCH_BOARD_LILYGO_TBEAM_LORA_GPS
default "ttgo_lora_esp32" if ARCH_BOARD_TTGO_LORA_ESP32
default "ttgo_t_display_esp32" if ARCH_BOARD_TTGO_T_DISPLAY_ESP32
default "twr-k60n512" if ARCH_BOARD_TWR_K60N512
default "twr-k64f120m" if ARCH_BOARD_TWR_K64F120M
default "u-blox-c027" if ARCH_BOARD_U_BLOX_C027
default "ubw32" if ARCH_BOARD_UBW32
default "us7032evb1" if ARCH_BOARD_US7032EVB1
default "viewtool-stm32f107" if ARCH_BOARD_VIEWTOOL_STM32F107
default "xmc4500-relax" if ARCH_BOARD_XMC4500RELAX
default "xmc4700-relax" if ARCH_BOARD_XMC4700RELAX
default "xmc4800-relax" if ARCH_BOARD_XMC4800RELAX
default "verdin-mx8mp" if ARCH_BOARD_VERDIN_MX8MP
default "z16f2800100zcog" if ARCH_BOARD_Z16F2800100ZCOG
default "z20x" if ARCH_BOARD_Z20X
default "z80sim" if ARCH_BOARD_Z80SIM
default "z8encore000zco" if ARCH_BOARD_Z8ENCORE000ZCO
default "z8f64200100kit" if ARCH_BOARD_Z8F64200100KIT
default "zp214xpa" if ARCH_BOARD_ZP214XPA
default "zkit-arm-1769" if ARCH_BOARD_ZKITARM
default "phy6222" if ARCH_BOARD_PHY6222
default "sim" if ARCH_BOARD_SIM
default "moxa" if ARCH_BOARD_MOXA
default "spresense" if ARCH_BOARD_SPRESENSE
default "xx3803" if ARCH_BOARD_XX3803
default "xx3823" if ARCH_BOARD_XX3823
default "s698pm-dkit" if ARCH_BOARD_S698PM_DKIT
default "hpm6360evk" if ARCH_BOARD_HPM6360EVK
default "hpm6750evk2" if ARCH_BOARD_HPM6750EVK2
default "at32f437-mini" if ARCH_BOARD_AT32F437_MINI
comment "Common Board Options"
config ARCH_HAVE_LEDS
bool
config ARCH_LEDS
bool "Board LED Status support"
default y
depends on ARCH_HAVE_LEDS
---help---
Use board LEDs to show NuttX execution status state. Unique to boards that have LEDs
if ARCH_LEDS
config ARCH_LEDS_CPU_ACTIVITY
bool "Use LED for CPU activities"
default n
depends on ARCH_LEDS
---help---
Use board LEDs to show CPU activities
endif
config ARCH_HAVE_BUTTONS
bool
config ARCH_BUTTONS
bool "Board button support"
default n
depends on ARCH_HAVE_BUTTONS
---help---
"Support interfaces to use buttons provided by the board."
config ARCH_HAVE_IRQBUTTONS
bool
config ARCH_IRQBUTTONS
bool "Button interrupt support"
default n
depends on ARCH_BUTTONS && ARCH_HAVE_IRQBUTTONS
---help---
"Support interrupts on button presses and releases."
comment "Board-Specific Options"
if ARCH_BOARD_PCDUINO_A10
source "boards/arm/a1x/pcduino-a10/Kconfig"
endif
if ARCH_BOARD_BEAGLEBONE_BLACK
source "boards/arm/am335x/beaglebone-black/Kconfig"
endif
if ARCH_BOARD_C5471EVM
source "boards/arm/c5471/c5471evm/Kconfig"
endif
if ARCH_BOARD_SPRESENSE
source "boards/arm/cxd56xx/spresense/Kconfig"
endif
if ARCH_BOARD_NTOSD_DM320
source "boards/arm/dm320/ntosd-dm320/Kconfig"
endif
if ARCH_BOARD_EFM32G8XXSTK
source "boards/arm/efm32/efm32-g8xx-stk/Kconfig"
endif
if ARCH_BOARD_EFM32GG_STK3700
source "boards/arm/efm32/efm32gg-stk3700/Kconfig"
endif
if ARCH_BOARD_OLIMEX_EFM32G880F128_STK
source "boards/arm/efm32/olimex-efm32g880f128-stk/Kconfig"
endif
if ARCH_BOARD_S32K118EVB
source "boards/arm/s32k1xx/s32k118evb/Kconfig"
endif
if ARCH_BOARD_S32K144EVB
source "boards/arm/s32k1xx/s32k144evb/Kconfig"
endif
if ARCH_BOARD_RDDRONE_BMS772
source "boards/arm/s32k1xx/rddrone-bms772/Kconfig"
endif
if ARCH_BOARD_S32K146EVB
source "boards/arm/s32k1xx/s32k146evb/Kconfig"
endif
if ARCH_BOARD_UCANS32K146
source "boards/arm/s32k1xx/ucans32k146/Kconfig"
endif
if ARCH_BOARD_S32K148EVB
source "boards/arm/s32k1xx/s32k148evb/Kconfig"
endif
if ARCH_BOARD_S32K344EVB
source "boards/arm/s32k3xx/s32k344evb/Kconfig"
endif
if ARCH_BOARD_MR_CANHUBK3
source "boards/arm/s32k3xx/mr-canhubk3/Kconfig"
endif
if ARCH_BOARD_SABRE_6QUAD
source "boards/arm/imx6/sabre-6quad/Kconfig"
endif
if ARCH_BOARD_TC397
source "boards/tricore/tc3xx/tc397/Kconfig"
endif
if ARCH_BOARD_QEMU_ARMV7A
source "boards/arm/qemu/qemu-armv7a/Kconfig"
endif
if ARCH_BOARD_QEMU_ARMV8A
source "boards/arm64/qemu/qemu-armv8a/Kconfig"
endif
if ARCH_BOARD_PINEPHONE
source "boards/arm64/a64/pinephone/Kconfig"
endif
if ARCH_BOARD_PINEPHONE_PRO
source "boards/arm64/rk3399/pinephonepro/Kconfig"
endif
if ARCH_BOARD_FVP_ARMV8R
source "boards/arm64/fvp-v8r/fvp-armv8r/Kconfig"
endif
if ARCH_BOARD_FVP_ARMV8R_AARCH32
source "boards/arm/fvp-v8r-aarch32/fvp-armv8r-aarch32/Kconfig"
endif
if ARCH_BOARD_IMX8QM_MEK
source "boards/arm64/imx8/imx8qm-mek/Kconfig"
endif
if ARCH_BOARD_IMXRT1020_EVK
source "boards/arm/imxrt/imxrt1020-evk/Kconfig"
endif
if ARCH_BOARD_IMXRT1050_EVK
source "boards/arm/imxrt/imxrt1050-evk/Kconfig"
endif
if ARCH_BOARD_IMXRT1060_EVK
source "boards/arm/imxrt/imxrt1060-evk/Kconfig"
endif
if ARCH_BOARD_IMXRT1064_EVK
source "boards/arm/imxrt/imxrt1064-evk/Kconfig"
endif
if ARCH_BOARD_IMXRT1170_EVK
source "boards/arm/imxrt/imxrt1170-evk/Kconfig"
endif
if ARCH_BOARD_TEENSY_4X
source "boards/arm/imxrt/teensy-4.x/Kconfig"
endif
if ARCH_BOARD_FREEDOM_K28F
source "boards/arm/kinetis/freedom-k28f/Kconfig"
endif
if ARCH_BOARD_FREEDOM_K64F
source "boards/arm/kinetis/freedom-k64f/Kconfig"
endif
if ARCH_BOARD_FREEDOM_K66F
source "boards/arm/kinetis/freedom-k66f/Kconfig"
endif
if ARCH_BOARD_KWIKSTIK_K40
source "boards/arm/kinetis/kwikstik-k40/Kconfig"
endif
if ARCH_BOARD_TEENSY_3X
source "boards/arm/kinetis/teensy-3.x/Kconfig"
endif
if ARCH_BOARD_TWR_K60N512
source "boards/arm/kinetis/twr-k60n512/Kconfig"
endif
if ARCH_BOARD_TWR_K64F120M
source "boards/arm/kinetis/twr-k64f120m/Kconfig"
endif
if ARCH_BOARD_FREEDOM_KL25Z
source "boards/arm/kl/freedom-kl25z/Kconfig"
endif
if ARCH_BOARD_FREEDOM_KL26Z
source "boards/arm/kl/freedom-kl26z/Kconfig"
endif
if ARCH_BOARD_GD32F450ZK_EVAL
source "boards/arm/gd32f4/gd32f450zk-eval/Kconfig"
endif
if ARCH_BOARD_GD32F470ZK_EVAL
source "boards/arm/gd32f4/gd32f470zk-eval/Kconfig"
endif
if ARCH_BOARD_GD32F470IK_EVAL
source "boards/arm/gd32f4/gd32f470ik-eval/Kconfig"
endif
if ARCH_BOARD_TEENSY_LC
source "boards/arm/kl/teensy-lc/Kconfig"
endif
if ARCH_BOARD_LC823450_XGEVK
source "boards/arm/lc823450/lc823450-xgevk/Kconfig"
endif
if ARCH_BOARD_LINCOLN60
source "boards/arm/lpc17xx_40xx/lincoln60/Kconfig"
endif
if ARCH_BOARD_LPC4088_DEVKIT
source "boards/arm/lpc17xx_40xx/lpc4088-devkit/Kconfig"
endif
if ARCH_BOARD_LPC4088_QUICKSTART
source "boards/arm/lpc17xx_40xx/lpc4088-quickstart/Kconfig"
endif
if ARCH_BOARD_LPCXPRESSO
source "boards/arm/lpc17xx_40xx/lpcxpresso-lpc1768/Kconfig"
endif
if ARCH_BOARD_MBED
source "boards/arm/lpc17xx_40xx/mbed/Kconfig"
endif
if ARCH_BOARD_MCB1700
source "boards/arm/lpc17xx_40xx/mcb1700/Kconfig"
endif
if ARCH_BOARD_LPC1766STK
source "boards/arm/lpc17xx_40xx/olimex-lpc1766stk/Kconfig"
endif
if ARCH_BOARD_OPEN1788
source "boards/arm/lpc17xx_40xx/open1788/Kconfig"
endif
if ARCH_BOARD_PNEV5180B
source "boards/arm/lpc17xx_40xx/pnev5180b/Kconfig"
endif
if ARCH_BOARD_U_BLOX_C027
source "boards/arm/lpc17xx_40xx/u-blox-c027/Kconfig"
endif
if ARCH_BOARD_ZKITARM
source "boards/arm/lpc17xx_40xx/zkit-arm-1769/Kconfig"
endif
if ARCH_BOARD_MCU123_LPC214X
source "boards/arm/lpc214x/mcu123-lpc214x/Kconfig"
endif
if ARCH_BOARD_ZP214XPA
source "boards/arm/lpc214x/zp214xpa/Kconfig"
endif
if ARCH_BOARD_OLIMEXLPC2378
source "boards/arm/lpc2378/olimex-lpc2378/Kconfig"
endif
if ARCH_BOARD_EA3131
source "boards/arm/lpc31xx/ea3131/Kconfig"
endif
if ARCH_BOARD_EA3152
source "boards/arm/lpc31xx/ea3152/Kconfig"
endif
if ARCH_BOARD_OLIMEX_LPC_H3131
source "boards/arm/lpc31xx/olimex-lpc-h3131/Kconfig"
endif
if ARCH_BOARD_BAMBINO_200E
source "boards/arm/lpc43xx/bambino-200e/Kconfig"
endif
if ARCH_BOARD_LPC4330_XPLORER
source "boards/arm/lpc43xx/lpc4330-xplorer/Kconfig"
endif
if ARCH_BOARD_LPC4337_WS
source "boards/arm/lpc43xx/lpc4337-ws/Kconfig"
endif
if ARCH_BOARD_LPC4357_EVB
source "boards/arm/lpc43xx/lpc4357-evb/Kconfig"
endif
if ARCH_BOARD_LPC4370_LINK2
source "boards/arm/lpc43xx/lpc4370-link2/Kconfig"
endif
if ARCH_BOARD_LPCXPRESSO_LPC54628
source "boards/arm/lpc54xx/lpcxpresso-lpc54628/Kconfig"
endif
if ARCH_BOARD_LX_CPU
source "boards/arm/lpc17xx_40xx/lx_cpu/Kconfig"
endif
if ARCH_BOARD_MAX32660_EVSYS
source "boards/arm/max326xx/max32660-evsys/Kconfig"
endif
if ARCH_BOARD_MOXA
source "boards/arm/moxart/moxa/Kconfig"
endif
if ARCH_BOARD_NRF52_FEATHER
source "boards/arm/nrf52/nrf52-feather/Kconfig"
endif
if ARCH_BOARD_NRF52832_SPARKFUN
source "boards/arm/nrf52/nrf52832-sparkfun/Kconfig"
endif
if ARCH_BOARD_NRF52832_MDK
source "boards/arm/nrf52/nrf52832-mdk/Kconfig"
endif
if ARCH_BOARD_NRF52832_DK
source "boards/arm/nrf52/nrf52832-dk/Kconfig"
endif
if ARCH_BOARD_NRF52840_DK
source "boards/arm/nrf52/nrf52840-dk/Kconfig"
endif
if ARCH_BOARD_THINGY52
source "boards/arm/nrf52/thingy52/Kconfig"
endif
if ARCH_BOARD_THINGY91_NRF52
source "boards/arm/nrf52/thingy91-nrf52/Kconfig"
endif
if ARCH_BOARD_NRF9160_DK_NRF52
source "boards/arm/nrf52/nrf9160-dk-nrf52/Kconfig"
endif
if ARCH_BOARD_NUTINY_NUC120
source "boards/arm/nuc1xx/nutiny-nuc120/Kconfig"
endif
if ARCH_BOARD_RASPBERRYPI_PICO
source "boards/arm/rp2040/raspberrypi-pico/Kconfig"
endif
if ARCH_BOARD_RASPBERRYPI_PICO_W
source "boards/arm/rp2040/raspberrypi-pico-w/Kconfig"
endif
if ARCH_BOARD_PIMORONI_TINY2040
source "boards/arm/rp2040/pimoroni-tiny2040/Kconfig"
endif
if ARCH_BOARD_ADAFRUIT_FEATHER_RP2040
source "boards/arm/rp2040/adafruit-feather-rp2040/Kconfig"
endif
if ARCH_BOARD_SEEED_XIAO_RP2040
source "boards/arm/rp2040/seeed-xiao-rp2040/Kconfig"
endif
if ARCH_BOARD_ADAFRUIT_KB2040
source "boards/arm/rp2040/adafruit-kb2040/Kconfig"
endif
if ARCH_BOARD_ADAFRUIT_QT_PY_RP2040
source "boards/arm/rp2040/adafruit-qt-py-rp2040/Kconfig"
endif
if ARCH_BOARD_ARDUINO_DUE
source "boards/arm/sam34/arduino-due/Kconfig"
endif
if ARCH_BOARD_ARDUINO_M0
source "boards/arm/samd2l2/arduino-m0/Kconfig"
endif
if ARCH_BOARD_ARDUINO_NANO_33BLE
source "boards/arm/nrf52/arduino-nano-33ble/Kconfig"
endif
if ARCH_BOARD_ARDUINO_NANO_33BLE_REV2
source "boards/arm/nrf52/arduino-nano-33ble-rev2/Kconfig"
endif
if ARCH_BOARD_CIRCUIT_EXPRESS
source "boards/arm/samd2l2/circuit-express/Kconfig"
endif
if ARCH_BOARD_FLIPNCLICK_SAM3X
source "boards/arm/sam34/flipnclick-sam3x/Kconfig"
endif
if ARCH_BOARD_SAM3UEK
source "boards/arm/sam34/sam3u-ek/Kconfig"
endif
if ARCH_BOARD_SAM4CMP_DB
source "boards/arm/sam34/sam4cmp-db/Kconfig"
endif
if ARCH_BOARD_SAM4EEK
source "boards/arm/sam34/sam4e-ek/Kconfig"
endif
if ARCH_BOARD_SAM4L_XPLAINED
source "boards/arm/sam34/sam4l-xplained/Kconfig"
endif
if ARCH_BOARD_SAM4S_XPLAINED
source "boards/arm/sam34/sam4s-xplained/Kconfig"
endif
if ARCH_BOARD_SAM4S_XPLAINED_PRO
source "boards/arm/sam34/sam4s-xplained-pro/Kconfig"
endif
if ARCH_BOARD_SAMA5D2_XULT
source "boards/arm/sama5/sama5d2-xult/Kconfig"
endif
if ARCH_BOARD_GIANT_BOARD
source "boards/arm/sama5/giant-board/Kconfig"
endif
if ARCH_BOARD_JUPITER_NANO
source "boards/arm/sama5/jupiter-nano/Kconfig"
endif
if ARCH_BOARD_SAMA5D3X_EK
source "boards/arm/sama5/sama5d3x-ek/Kconfig"
endif
if ARCH_BOARD_SAMA5D3_XPLAINED
source "boards/arm/sama5/sama5d3-xplained/Kconfig"
endif
if ARCH_BOARD_SAMA5D4_EK
source "boards/arm/sama5/sama5d4-ek/Kconfig"
endif
if ARCH_BOARD_SAMD20_XPLAINED
source "boards/arm/samd2l2/samd20-xplained/Kconfig"
endif
if ARCH_BOARD_SAMD21_XPLAINED
source "boards/arm/samd2l2/samd21-xplained/Kconfig"
endif
if ARCH_BOARD_SAME54_XPLAINED_PRO
source "boards/arm/samd5e5/same54-xplained-pro/Kconfig"
endif
if ARCH_BOARD_SAML21_XPLAINED
source "boards/arm/samd2l2/saml21-xplained/Kconfig"
endif
if ARCH_BOARD_METRO_M4
source "boards/arm/samd5e5/metro-m4/Kconfig"
endif
if ARCH_BOARD_SAME70_QMTECH
source "boards/arm/samv7/same70-qmtech/Kconfig"
endif
if ARCH_BOARD_SAME70_XPLAINED
source "boards/arm/samv7/same70-xplained/Kconfig"
endif
if ARCH_BOARD_SAMV71_XULT
source "boards/arm/samv7/samv71-xult/Kconfig"
endif
if ARCH_BOARD_B_G474E_DPOW1
source "boards/arm/stm32/b-g474e-dpow1/Kconfig"
endif
if ARCH_BOARD_B_G431B_ESC1
source "boards/arm/stm32/b-g431b-esc1/Kconfig"
endif
if ARCH_BOARD_NUCLEO_G431KB
source "boards/arm/stm32/nucleo-g431kb/Kconfig"
endif
if ARCH_BOARD_NUCLEO_G431RB
source "boards/arm/stm32/nucleo-g431rb/Kconfig"
endif
if ARCH_BOARD_B_L072Z_LRWAN1
source "boards/arm/stm32f0l0g0/b-l072z-lrwan1/Kconfig"
endif
if ARCH_BOARD_NUCLEO_F072RB
source "boards/arm/stm32f0l0g0/nucleo-f072rb/Kconfig"
endif
if ARCH_BOARD_NUCLEO_F091RC
source "boards/arm/stm32f0l0g0/nucleo-f091rc/Kconfig"
endif
if ARCH_BOARD_NUCLEO_G070RB
source "boards/arm/stm32f0l0g0/nucleo-g070rb/Kconfig"
endif
if ARCH_BOARD_NUCLEO_G071RB
source "boards/arm/stm32f0l0g0/nucleo-g071rb/Kconfig"
endif
if ARCH_BOARD_NUCLEO_L073RZ
source "boards/arm/stm32f0l0g0/nucleo-l073rz/Kconfig"
endif
if ARCH_BOARD_STM32F051_DISCOVERY
source "boards/arm/stm32f0l0g0/stm32f051-discovery/Kconfig"
endif
if ARCH_BOARD_STM32L0538_DISCO
source "boards/arm/stm32f0l0g0/stm32l0538-disco/Kconfig"
endif
if ARCH_BOARD_STM32F072_DISCOVERY
source "boards/arm/stm32f0l0g0/stm32f072-discovery/Kconfig"
endif
if ARCH_BOARD_NUCLEO_144
source "boards/arm/stm32f7/nucleo-144/Kconfig"
endif
if ARCH_BOARD_STM32F746_WS
source "boards/arm/stm32f7/stm32f746-ws/Kconfig"
endif
if ARCH_BOARD_MEADOW_F7MICRO
source "boards/arm/stm32f7/stm32f777zit6-meadow/Kconfig"
endif
if ARCH_BOARD_STM32F746G_DISCO
source "boards/arm/stm32f7/stm32f746g-disco/Kconfig"
endif
if ARCH_BOARD_STM32F769I_DISCO
source "boards/arm/stm32f7/stm32f769i-disco/Kconfig"
endif
if ARCH_BOARD_STEVAL_ETH001V1
source "boards/arm/stm32f7/steval-eth001v1/Kconfig"
endif
if ARCH_BOARD_STM32H747I_DISCO
source "boards/arm/stm32h7/stm32h747i-disco/Kconfig"
endif
if ARCH_BOARD_NUCLEO_H743ZI
source "boards/arm/stm32h7/nucleo-h743zi/Kconfig"
endif
if ARCH_BOARD_NUCLEO_H743ZI2
source "boards/arm/stm32h7/nucleo-h743zi2/Kconfig"
endif
if ARCH_BOARD_NUCLEO_H745ZI
source "boards/arm/stm32h7/nucleo-h745zi/Kconfig"
endif
if ARCH_BOARD_STM32H745I_DISCO
source "boards/arm/stm32h7/stm32h745i-disco/Kconfig"
endif
if ARCH_BOARD_LINUM_STM32H753BI
source "boards/arm/stm32h7/linum-stm32h753bi/Kconfig"
endif
if ARCH_BOARD_B_L475E_IOT01A
source "boards/arm/stm32l4/b-l475e-iot01a/Kconfig"
endif
if ARCH_BOARD_B_U585I_IOT02A
source "boards/arm/stm32u5/b-u585i-iot02a/Kconfig"
endif
if ARCH_BOARD_NUCLEO_U5A5ZJ_Q
source "boards/arm/stm32u5/nucleo-u5a5zj-q/Kconfig"
endif
if ARCH_BOARD_NUCLEO_L432KC
source "boards/arm/stm32l4/nucleo-l432kc/Kconfig"
endif
if ARCH_BOARD_NUCLEO_L452RE
source "boards/arm/stm32l4/nucleo-l452re/Kconfig"
endif
if ARCH_BOARD_NUCLEO_L476RG
source "boards/arm/stm32l4/nucleo-l476rg/Kconfig"
endif
if ARCH_BOARD_STEVAL_STLCS01V1
source "boards/arm/stm32l4/steval-stlcs01v1/Kconfig"
endif
if ARCH_BOARD_NUCLEO_L496ZG
source "boards/arm/stm32l4/nucleo-l496zg/Kconfig"
endif
if ARCH_BOARD_NUCLEO_L552ZE
source "boards/arm/stm32l5/nucleo-l552ze/Kconfig"
endif
if ARCH_BOARD_NUCLEO_WL55JC
source "boards/arm/stm32wl5/nucleo-wl55jc/Kconfig"
endif
if ARCH_BOARD_STM32L476_MDK
source "boards/arm/stm32l4/stm32l476-mdk/Kconfig"
endif
if ARCH_BOARD_STM32L476VG_DISCO
source "boards/arm/stm32l4/stm32l476vg-disco/Kconfig"
endif
if ARCH_BOARD_STM32L4R9AI_DISCO
source "boards/arm/stm32l4/stm32l4r9ai-disco/Kconfig"
endif
if ARCH_BOARD_STM32L562E_DK
source "boards/arm/stm32l5/stm32l562e-dk/Kconfig"
endif
if ARCH_BOARD_FLIPPERZERO
source "boards/arm/stm32wb/flipperzero/Kconfig"
endif
if ARCH_BOARD_NUCLEO_WB55RG
source "boards/arm/stm32wb/nucleo-wb55rg/Kconfig"
endif
if ARCH_BOARD_AXOLOTI
source "boards/arm/stm32/axoloti/Kconfig"
endif
if ARCH_BOARD_CLICKER2_STM32
source "boards/arm/stm32/clicker2-stm32/Kconfig"
endif
if ARCH_BOARD_CLOUDCTRL
source "boards/arm/stm32/cloudctrl/Kconfig"
endif
if ARCH_BOARD_EMW3162
source "boards/arm/stm32/emw3162/Kconfig"
endif
if ARCH_BOARD_FIRE_STM32
source "boards/arm/stm32/fire-stm32v2/Kconfig"
endif
if ARCH_BOARD_HYMINI_STM32V
source "boards/arm/stm32/hymini-stm32v/Kconfig"
endif
if ARCH_BOARD_MAPLE
source "boards/arm/stm32/maple/Kconfig"
endif
if ARCH_BOARD_ET_STM32_STAMP
source "boards/arm/stm32/et-stm32-stamp/Kconfig"
endif
if ARCH_BOARD_MIKROE_STM32F4
source "boards/arm/stm32/mikroe-stm32f4/Kconfig"
endif
if ARCH_BOARD_NUCLEO_F103RB
source "boards/arm/stm32/nucleo-f103rb/Kconfig"
endif
if ARCH_BOARD_NUCLEO_F207ZG
source "boards/arm/stm32/nucleo-f207zg/Kconfig"
endif
if ARCH_BOARD_NUCLEO_F302R8
source "boards/arm/stm32/nucleo-f302r8/Kconfig"
endif
if ARCH_BOARD_NUCLEO_F303RE
source "boards/arm/stm32/nucleo-f303re/Kconfig"
endif
if ARCH_BOARD_NUCLEO_F303ZE
source "boards/arm/stm32/nucleo-f303ze/Kconfig"
endif
if ARCH_BOARD_NUCLEO_F334R8
source "boards/arm/stm32/nucleo-f334r8/Kconfig"
endif
if ARCH_BOARD_NUCLEO_F410RB
source "boards/arm/stm32/nucleo-f410rb/Kconfig"
endif
if ARCH_BOARD_NUCLEO_F412ZG
source "boards/arm/stm32/nucleo-f412zg/Kconfig"
endif
if ARCH_BOARD_NUCLEO_F446RE
source "boards/arm/stm32/nucleo-f446re/Kconfig"
endif
if ARCH_BOARD_NUCLEO_F401RE || ARCH_BOARD_NUCLEO_F411RE
source "boards/arm/stm32/nucleo-f4x1re/Kconfig"
endif
if ARCH_BOARD_STM32F401RC_RS485
source "boards/arm/stm32/stm32f401rc-rs485/Kconfig"
endif
if ARCH_BOARD_NUCLEO_F429ZI
source "boards/arm/stm32/nucleo-f429zi/Kconfig"
endif
if ARCH_BOARD_NUCLEO_L152RE
source "boards/arm/stm32/nucleo-l152re/Kconfig"
endif
if ARCH_BOARD_ODRIVE36
source "boards/arm/stm32/odrive36/Kconfig"
endif
if ARCH_BOARD_OLIMEX_STM32E407
source "boards/arm/stm32/olimex-stm32-e407/Kconfig"
endif
if ARCH_BOARD_OLIMEX_STM32H405
source "boards/arm/stm32/olimex-stm32-h405/Kconfig"
endif
if ARCH_BOARD_OLIMEX_STM32H407
source "boards/arm/stm32/olimex-stm32-h407/Kconfig"
endif
if ARCH_BOARD_OLIMEX_STM32P107
source "boards/arm/stm32/olimex-stm32-p107/Kconfig"
endif
if ARCH_BOARD_OLIMEX_STM32P207
source "boards/arm/stm32/olimex-stm32-p207/Kconfig"
endif
if ARCH_BOARD_OLIMEX_STM32P407
source "boards/arm/stm32/olimex-stm32-p407/Kconfig"
endif
if ARCH_BOARD_OLIMEXINO_STM32
source "boards/arm/stm32/olimexino-stm32/Kconfig"
endif
if ARCH_BOARD_OMNIBUSF4
source "boards/arm/stm32/omnibusf4/Kconfig"
endif
if ARCH_BOARD_PHOTON
source "boards/arm/stm32/photon/Kconfig"
endif
if ARCH_BOARD_SHENZHOU
source "boards/arm/stm32/shenzhou/Kconfig"
endif
if ARCH_BOARD_STM3210E_EVAL
source "boards/arm/stm32/stm3210e-eval/Kconfig"
endif
if ARCH_BOARD_STM3220G_EVAL
source "boards/arm/stm32/stm3220g-eval/Kconfig"
endif
if ARCH_BOARD_STM3240G_EVAL
source "boards/arm/stm32/stm3240g-eval/Kconfig"
endif
if ARCH_BOARD_STM32_TINY
source "boards/arm/stm32/stm32_tiny/Kconfig"
endif
if ARCH_BOARD_STM32_BUTTERFLY2
source "boards/arm/stm32/stm32butterfly2/Kconfig"
endif
if ARCH_BOARD_STM32F103_MINIMUM
source "boards/arm/stm32/stm32f103-minimum/Kconfig"
endif
if ARCH_BOARD_STM32F411_MINIMUM
source "boards/arm/stm32/stm32f411-minimum/Kconfig"
endif
if ARCH_BOARD_STM32F334_DISCO
source "boards/arm/stm32/stm32f334-disco/Kconfig"
endif
if ARCH_BOARD_STM32F3_DISCOVERY
source "boards/arm/stm32/stm32f3discovery/Kconfig"
endif
if ARCH_BOARD_STM32F411E_DISCO
source "boards/arm/stm32/stm32f411e-disco/Kconfig"
endif
if ARCH_BOARD_STM32F429I_DISCO
source "boards/arm/stm32/stm32f429i-disco/Kconfig"
endif
if ARCH_BOARD_STM32F4_DISCOVERY
source "boards/arm/stm32/stm32f4discovery/Kconfig"
endif
if ARCH_BOARD_STM32L_DISCOVERY
source "boards/arm/stm32/stm32ldiscovery/Kconfig"
endif
if ARCH_BOARD_STM32VL_DISCOVERY
source "boards/arm/stm32/stm32vldiscovery/Kconfig"
endif
if ARCH_BOARD_VIEWTOOL_STM32F107
source "boards/arm/stm32/viewtool-stm32f107/Kconfig"
endif
if ARCH_BOARD_OLIMEX_STRP711
source "boards/arm/str71x/olimex-strp711/Kconfig"
endif
if ARCH_BOARD_DK_TM4C129X
source "boards/arm/tiva/dk-tm4c129x/Kconfig"
endif
if ARCH_BOARD_EAGLE100
source "boards/arm/tiva/eagle100/Kconfig"
endif
if ARCH_BOARD_EKKLM3S9B96
source "boards/arm/tiva/ekk-lm3s9b96/Kconfig"
endif
if ARCH_BOARD_LAUNCHXL_CC1310
source "boards/arm/tiva/launchxl-cc1310/Kconfig"
endif
if ARCH_BOARD_LAUNCHXL_CC1312R1
source "boards/arm/tiva/launchxl-cc1312r1/Kconfig"
endif
if ARCH_BOARD_LM3S6432S2E
source "boards/arm/tiva/lm3s6432-s2e/Kconfig"
endif
if ARCH_BOARD_LM3S6965EK
source "boards/arm/tiva/lm3s6965-ek/Kconfig"
endif
if ARCH_BOARD_LM3S8962EK
source "boards/arm/tiva/lm3s8962-ek/Kconfig"
endif
if ARCH_BOARD_LM3S8962EK
source "boards/arm/tiva/lm4f120-launchpad/Kconfig"
endif
if ARCH_BOARD_TM4C123G_LAUNCHPAD
source "boards/arm/tiva/tm4c123g-launchpad/Kconfig"
endif
if ARCH_BOARD_TM4C1294_LAUNCHPAD
source "boards/arm/tiva/tm4c1294-launchpad/Kconfig"
endif
if ARCH_BOARD_TM4C129E_LAUNCHPAD
source "boards/arm/tiva/tm4c129e-launchpad/Kconfig"
endif
if ARCH_BOARD_LAUNCHXL_TMS57004
source "boards/arm/tms570/launchxl-tms57004/Kconfig"
endif
if ARCH_BOARD_TMS570LS31X_USB_KIT
source "boards/arm/tms570/tms570ls31x-usb-kit/Kconfig"
endif
if ARCH_BOARD_XMC4500RELAX
source "boards/arm/xmc4/xmc4500-relax/Kconfig"
endif
if ARCH_BOARD_XMC4700RELAX
source "boards/arm/xmc4/xmc4700-relax/Kconfig"
endif
if ARCH_BOARD_XMC4800RELAX
source "boards/arm/xmc4/xmc4800-relax/Kconfig"
endif
if ARCH_BOARD_VERDIN_MX8MP
source "boards/arm/mx8mp/verdin-mx8mp/Kconfig"
endif
if ARCH_BOARD_AVR32DEV1
source "boards/avr/at32uc3/avr32dev1/Kconfig"
endif
if ARCH_BOARD_MEGA1284P_XPLAINED
source "boards/avr/atmega/mega1284p-xplained/Kconfig"
endif
if ARCH_BOARD_MICROPENDOUS3
source "boards/avr/at90usb/micropendous3/Kconfig"
endif
if ARCH_BOARD_TEENSY_20
source "boards/avr/at90usb/teensy-2.0/Kconfig"
endif
if ARCH_BOARD_AMBER
source "boards/avr/atmega/amber/Kconfig"
endif
if ARCH_BOARD_ARDUINO_MEGA2560
source "boards/avr/atmega/arduino-mega2560/Kconfig"
endif
if ARCH_BOARD_MOTEINO_MEGA
source "boards/avr/atmega/moteino-mega/Kconfig"
endif
if ARCH_BOARD_CUSTOM
source "$BINDIR/boards/dummy/Kconfig"
endif
if ARCH_BOARD_DEMOS92S12NEC64
source "boards/hc/m9s12/demo9s12ne64/Kconfig"
endif
if ARCH_BOARD_NE64BADGE
source "boards/hc/m9s12/ne64badge/Kconfig"
endif
if ARCH_BOARD_MIRTOO
source "boards/mips/pic32mx/mirtoo/Kconfig"
endif
if ARCH_BOARD_PIC32MX_STARTERKIT
source "boards/mips/pic32mx/pic32mx-starterkit/Kconfig"
endif
if ARCH_BOARD_PIC32MX7MMB
source "boards/mips/pic32mx/pic32mx7mmb/Kconfig"
endif
if ARCH_BOARD_SUREPIC32MX
source "boards/mips/pic32mx/sure-pic32mx/Kconfig"
endif
if ARCH_BOARD_UBW32
source "boards/mips/pic32mx/ubw32/Kconfig"
endif
if ARCH_BOARD_CHIPKIT_WIFIRE
source "boards/mips/pic32mz/chipkit-wifire/Kconfig"
endif
if ARCH_BOARD_FLIPNCLICK_PIC32MZ
source "boards/mips/pic32mz/flipnclick-pic32mz/Kconfig"
endif
if ARCH_BOARD_PIC32MZ_STARTERKIT
source "boards/mips/pic32mz/pic32mz-starterkit/Kconfig"
endif
if ARCH_BOARD_MISOC_QEMU || ARCH_BOARD_MISOC_VERILATOR
source "boards/misoc/lm32/misoc/Kconfig"
endif
if ARCH_BOARD_OR1K
source "boards/or1k/mor1kx/or1k/Kconfig"
endif
if ARCH_BOARD_SKP16C26
source "boards/renesas/m16c/skp16c26/Kconfig"
endif
if ARCH_BOARD_US7032EVB1
source "boards/renesas/sh1/us7032evb1/Kconfig"
endif
if ARCH_BOARD_ARTY_A7
source "boards/risc-v/litex/arty_a7/Kconfig"
endif
if ARCH_BOARD_HIFIVE_REVB
source "boards/risc-v/fe310/hifive1-revb/Kconfig"
endif
if ARCH_BOARD_MAIX_BIT
source "boards/risc-v/k210/maix-bit/Kconfig"
endif
if ARCH_BOARD_SMARTL_C906
source "boards/risc-v/c906/smartl-c906/Kconfig"
endif
if ARCH_BOARD_ICICLE_MPFS
source "boards/risc-v/mpfs/icicle/Kconfig"
endif
if ARCH_BOARD_M100PFSEVP_MPFS
source "boards/risc-v/mpfs/m100pfsevp/Kconfig"
endif
if ARCH_BOARD_RV32M1_VEGA
source "boards/risc-v/rv32m1/rv32m1-vega/Kconfig"
endif
if ARCH_BOARD_QEMU_RV_VIRT
source "boards/risc-v/qemu-rv/rv-virt/Kconfig"
endif
if ARCH_BOARD_JH7110_STAR64
source "boards/risc-v/jh7110/star64/Kconfig"
endif
if ARCH_BOARD_K230_CANMV
source "boards/risc-v/k230/canmv230/Kconfig"
endif
if ARCH_BOARD_BL808_OX64
source "boards/risc-v/bl808/ox64/Kconfig"
endif
if ARCH_BOARD_ESP32C3_DEVKIT
source "boards/risc-v/esp32c3-legacy/esp32c3-devkit/Kconfig"
endif
if ARCH_BOARD_ESP32C3_DEVKIT_RUST1
source "boards/risc-v/esp32c3-legacy/esp32c3-devkit-rust-1/Kconfig"
endif
if ARCH_BOARD_ESP32C3_GENERIC
source "boards/risc-v/esp32c3/esp32c3-generic/Kconfig"
endif
if ARCH_BOARD_ESP32S2_KALUGA_1
source "boards/xtensa/esp32s2/esp32s2-kaluga-1/Kconfig"
endif
if ARCH_BOARD_ESP32S2_SAOLA_1
source "boards/xtensa/esp32s2/esp32s2-saola-1/Kconfig"
endif
if ARCH_BOARD_FRANZININHO_WIFI
source "boards/xtensa/esp32s2/franzininho-wifi/Kconfig"
endif
if ARCH_BOARD_ESP32S3_DEVKIT
source "boards/xtensa/esp32s3/esp32s3-devkit/Kconfig"
endif
if ARCH_BOARD_ESP32S3_EYE
source "boards/xtensa/esp32s3/esp32s3-eye/Kconfig"
endif
if ARCH_BOARD_ESP32S3_MEADOW
source "boards/xtensa/esp32s3/esp32s3-meadow/Kconfig"
endif
if ARCH_BOARD_ESP32S3_LCD_EV
source "boards/xtensa/esp32s3/esp32s3-lcd-ev/Kconfig"
endif
if ARCH_BOARD_ESP32S3_BOX
source "boards/xtensa/esp32s3/esp32s3-box/Kconfig"
endif
#if ARCH_BOARD_ESP32C6_DEVKIT
#source "boards/risc-v/esp32c6/esp32c6-devkit/Kconfig"
#endif
if ARCH_BOARD_ESP32H2_DEVKIT
source "boards/risc-v/esp32h2/esp32h2-devkit/Kconfig"
endif
if ARCH_BOARD_SIM
source "boards/sim/sim/sim/Kconfig"
endif
if ARCH_BOARD_QEMU_I486
source "boards/x86/qemu/qemu-i486/Kconfig"
endif
if ARCH_BOARD_INTEL64_QEMU
source "boards/x86_64/intel64/qemu-intel64/Kconfig"
endif
if ARCH_BOARD_RX65N
source "boards/renesas/rx65n/rx65n/Kconfig"
endif
if ARCH_BOARD_RX65N_RSK1MB
source "boards/renesas/rx65n/rx65n-rsk1mb/Kconfig"
endif
if ARCH_BOARD_RX65N_RSK2MB
source "boards/renesas/rx65n/rx65n-rsk2mb/Kconfig"
endif
if ARCH_BOARD_RX65N_GRROSE
source "boards/renesas/rx65n/rx65n-grrose/Kconfig"
endif
if ARCH_BOARD_ESP32_AUDIO_KIT
source "boards/xtensa/esp32/esp32-audio-kit/Kconfig"
endif
if ARCH_BOARD_ESP32_DEVKITC
source "boards/xtensa/esp32/esp32-devkitc/Kconfig"
endif
if ARCH_BOARD_TTGO_T5V2_ESP32
source "boards/xtensa/esp32/ttgo_eink5_v2/Kconfig"
endif
if ARCH_BOARD_ESP32_ETHERNETKIT
source "boards/xtensa/esp32/esp32-ethernet-kit/Kconfig"
endif
if ARCH_BOARD_ESP32_PICO_KIT
source "boards/xtensa/esp32/esp32-pico-kit/Kconfig"
endif
if ARCH_BOARD_ESP32_LYRAT
source "boards/xtensa/esp32/esp32-lyrat/Kconfig"
endif
if ARCH_BOARD_ESP32_SPARROWKIT
source "boards/xtensa/esp32/esp32-sparrow-kit/Kconfig"
endif
if ARCH_BOARD_ESP32_WROVERKIT
source "boards/xtensa/esp32/esp32-wrover-kit/Kconfig"
endif
if ARCH_BOARD_ESP32_2432S028
source "boards/xtensa/esp32/esp32-2432S028/Kconfig"
endif
if ARCH_BOARD_LILYGO_TBEAM_LORA_GPS
source "boards/xtensa/esp32/lilygo_tbeam_lora_gps/Kconfig"
endif
if ARCH_BOARD_TTGO_LORA_ESP32
source "boards/xtensa/esp32/ttgo_lora_esp32/Kconfig"
endif
if ARCH_BOARD_TTGO_T_DISPLAY_ESP32
source "boards/xtensa/esp32/ttgo_t_display_esp32/Kconfig"
endif
if ARCH_BOARD_Z16F2800100ZCOG
source "boards/z16/z16f/z16f2800100zcog/Kconfig"
endif
if ARCH_BOARD_EZ80F910200KITG
source "boards/z80/ez80/ez80f910200kitg/Kconfig"
endif
if ARCH_BOARD_EZ80F910200ZCO
source "boards/z80/ez80/ez80f910200zco/Kconfig"
endif
if ARCH_BOARD_MAKERLISP
source "boards/z80/ez80/makerlisp/Kconfig"
endif
if ARCH_BOARD_P112
source "boards/z80/z180/p112/Kconfig"
endif
if ARCH_BOARD_Z8ENCORE000ZCO
source "boards/z80/z8/z8encore000zco/Kconfig"
endif
if ARCH_BOARD_Z8F64200100KIT
source "boards/z80/z8/z8f64200100kit/Kconfig"
endif
if ARCH_BOARD_Z20X
source "boards/z80/ez80/z20x/Kconfig"
endif
if ARCH_BOARD_Z80SIM
source "boards/z80/z80/z80sim/Kconfig"
endif
if ARCH_BOARD_BL602EVB
source "boards/risc-v/bl602/bl602evb/Kconfig"
endif
if ARCH_BOARD_PHY6222
source "boards/arm/phy62xx/phy6222/Kconfig"
endif
if ARCH_BOARD_XX3803
source "boards/sparc/bm3803/xx3803/Kconfig"
endif
if ARCH_BOARD_XX3823
source "boards/sparc/bm3823/xx3823/Kconfig"
endif
if ARCH_BOARD_S698PM_DKIT
source "boards/sparc/s698pm/s698pm-dkit/Kconfig"
endif
if ARCH_BOARD_TLSR8278ADK80D
source "boards/arm/tlsr82/tlsr8278adk80d/Kconfig"
endif
if ARCH_BOARD_HPM6360EVK
source "boards/risc-v/hpm6000/hpm6360evk/Kconfig"
endif
if ARCH_BOARD_HPM6750EVK2
source "boards/risc-v/hpm6750/hpm6750evk2/Kconfig"
endif
if ARCH_BOARD_AT32F437_MINI
source "boards/arm/at32/at32f437-mini/Kconfig"
endif
comment "Board-Common Options"
config ARCH_BOARD_COMMON
bool "Board common logic"
default n
---help---
Board common logic located in each board/common folder.
if ARCH_BOARD_COMMON
if ARCH_CHIP_ESP32
source "boards/xtensa/esp32/common/Kconfig"
endif
if ARCH_CHIP_ESP32S2
source "boards/xtensa/esp32s2/common/Kconfig"
endif
if ARCH_CHIP_ESP32S3
source "boards/xtensa/esp32s3/common/Kconfig"
endif
if ARCH_CHIP_ESP32C3
source "boards/risc-v/esp32c3-legacy/common/Kconfig"
endif
if ARCH_CHIP_ESP32C3_GENERIC
source "boards/risc-v/esp32c3/common/Kconfig"
endif
if ARCH_CHIP_ESP32C6
source "boards/risc-v/esp32c6/common/Kconfig"
endif
if ARCH_CHIP_ESP32H2
source "boards/risc-v/esp32h2/common/Kconfig"
endif
if ARCH_CHIP_SAMV7
source "boards/arm/samv7/common/Kconfig"
endif
if ARCH_CHIP_STM32
source "boards/arm/stm32/common/Kconfig"
endif
if ARCH_CHIP_STM32F0L0G0
source "boards/arm/stm32f0l0g0/common/Kconfig"
endif
if ARCH_CHIP_RP2040
source "boards/arm/rp2040/common/Kconfig"
endif
if ARCH_CHIP_NRF52
source "boards/arm/nrf52/common/Kconfig"
endif
if ARCH_CHIP_NRF53
source "boards/arm/nrf53/common/Kconfig"
endif
if ARCH_CHIP_NRF91
source "boards/arm/nrf91/common/Kconfig"
endif
endif
config BOARD_CRASHDUMP
bool "Enable Board level logging of crash dumps"
default n
---help---
If selected up_assert will call out to board_crashdump, in the case
of an assertion failure, prior to calling exit. Or in the
case of a hardfault prior to looping indefinitely. board_crashdump
then has a chance to save the state of the machine.
The purpose of board_crashdump is to save as much information as it can
about the cause of the fault and then most likely reset the system.
N.B. There is limited system resources that can be used, who knows
what memory is trashed? So all we can expect to do is save the
"machine state" in a place where on the next reset can write it
to more sophisticated storage in a sane operating environment.
config BOARD_COREDUMP_SYSLOG
bool "Enable Core dump to syslog"
default n
depends on ELF_COREDUMP
---help---
Enable put coredump to syslog when crash.
config BOARD_COREDUMP_BLKDEV
bool "Enable Core Dump to block device"
default n
depends on ELF_COREDUMP
---help---
Enable save coredump at block device when crash.
config BOARD_COREDUMP_BLKDEV_PATH
string "Save Core Dump block device PATH"
depends on BOARD_COREDUMP_BLKDEV
---help---
Save coredump file block device path.
config BOARD_COREDUMP_FULL
bool "Core Dump all thread registers and stacks"
default y
depends on BOARD_COREDUMP_SYSLOG || BOARD_COREDUMP_BLKDEV
---help---
Enable to support for the dump all task registers and stacks.
config BOARD_COREDUMP_COMPRESSION
bool "Enable Core Dump compression"
default y
select LIBC_LZF
depends on BOARD_COREDUMP_SYSLOG || BOARD_COREDUMP_BLKDEV
---help---
Enable LZF compression algorithm for core dump content
config BOARD_ENTROPY_POOL
bool "Enable Board level storing of entropy pool structure"
default n
depends on CRYPTO_RANDOM_POOL
---help---
Entropy pool structure can be provided by board source.
Use for this is, for example, to allocate entropy pool
from special area of RAM which content is kept over
system reset.
config BOARD_INITRNGSEED
bool "Enable Board level initial seeding of entropy pool RNG"
default n
depends on CRYPTO_RANDOM_POOL
---help---
If enabled, entropy pool random number generator will call
board_init_rndseed() upon initialization. This function
can then provide early entropy seed to the pool through
entropy injection APIs provided at 'nuttx/random.h'.
config BOARDCTL
bool "Enable boardctl() interface"
default n
---help---
Enables support for the boardctl() interface. Architecture
specific logic must provide board_app_initialize() interface.
if BOARDCTL
config BOARDCTL_FINALINIT
bool "Enable board app final init"
default n
---help---
Enables support for the BOARDIOC_FINALINIT boardctl() command.
Architecture specific logic must provide board_app_finalinitialize()
interface.
config BOARDCTL_POWEROFF
bool "Enable power off interfaces"
default n
depends on ARCH_HAVE_POWEROFF
---help---
Enables support for the BOARDIOC_POWEROFF boardctl() command.
Architecture specific logic must provide the board_power_off()
interface.
config BOARDCTL_RESET
bool "Enable reset interfaces"
default n
depends on ARCH_HAVE_RESET
---help---
Enables support for the BOARDIOC_RESET boardctl() command.
Architecture specific logic must provide the board_reset()
interface.
config BOARD_RESET_ON_ASSERT
int "Enable Board Reset after assert"
default 0
depends on BOARDCTL_RESET
---help---
== 0 up_assert never reset the machine
>= 1 up_assert from interrupt handler or kernel thread will reset
the machine
>= 2 up_assert from user or kernel thread will reset the machine.
The default behavior just kill the asserting thread.
config BOARD_ASSERT_RESET_VALUE
int "Board reset argument"
default 1
depends on BOARDCTL_RESET
---help---
Parameter that will be passed to board_reset() by when an
assertion occurs. This may be used by board_reset()
implementations to handle the reset differently for the
case of a crash.
config BOARDCTL_RESET_CAUSE
bool "Return reset cause"
default n
depends on ARCH_HAVE_RESET
---help---
Enables support for the BOARDIOC_RESET_CAUSE boardctl() command.
Architecture specific logic must provide the board_reset_cause()
interface.
config BOARDCTL_UNIQUEID
bool "Return board unique ID"
default n
---help---
Enables support for the BOARDIOC_UNIQUEID boardctl() command.
Architecture specific logic must provide the board_uniqueid()
interface.
config BOARDCTL_UNIQUEID_SIZE
int "Size of the board unique ID (bytes)"
default 16
depends on BOARDCTL_UNIQUEID
---help---
Provides the size of the memory buffer that must be provided by the
caller of board_uniqueid() in which to receive the board unique ID.
config BOARDCTL_UNIQUEKEY
bool "Return board unique KEY"
default n
---help---
Enables support for the BOARDIOC_UNIQUEKEY boardctl() command.
Architecture specific logic must provide the board_uniquekey()
interface.
config BOARDCTL_UNIQUEKEY_SIZE
int "Size of the board unique KEY (bytes)"
default 16
depends on BOARDCTL_UNIQUEKEY
---help---
Provides the size of the memory buffer that must be provided by the
caller of board_uniquekey() in which to receive the board unique KEY.
config BOARDCTL_SWITCH_BOOT
bool "Enable switch boot system support"
default n
---help---
BOARDIOC_SWITCH_BOOT is required to communicate the boot partition
from userspace (OTA subsystem) to board for A/B boot or single boot
case. It can be used to change the system boot behavior. For instance,
once a firmware updated successfully, this boardctl can be used to
modify FLASH bank selection.
config BOARDCTL_BOOT_IMAGE
bool "Boot a new application firmware image"
default n
---help---
Boot a new application firmware image.
Architecture-specific logic must provide the board_boot_image()
interface for executing the required actions for booting a new
application firmware image (e.g. deinitialize peripherals, load the
Program Counter register with the application firmware image entry
point address).
config BOARDCTL_MKRD
bool "Enable application space creation of RAM disks"
default n
select DRVR_MKRD
depends on !DISABLE_MOUNTPOINT
---help---
Enables support for the BOARDIOC_MKRD boardctl() command.
config BOARDCTL_ROMDISK
bool "Enable application space creation of ROM disks"
default n
depends on !DISABLE_MOUNTPOINT
---help---
Enables support for the BOARDIOC_MKRD boardctl() command.
config BOARDCTL_APP_SYMTAB
bool "Enable application symbol table interfaces"
default n
---help---
Enables support for the BOARDIOC_APP_SYMTAB boardctl() command.
config BOARDCTL_OS_SYMTAB
bool "Enable kernel module symbol table interfaces"
default n
depends on MODULE
---help---
Enables support for the BOARDIOC_OS_SYMTAB boardctl() command.
config BOARDCTL_USBDEVCTRL
bool "Enable USB device controls"
default n
depends on USBDEV
---help---
Enables support for the BOARDIOC_USBDEV_CONTROL boardctl() command.
config BOARDCTL_TESTSET
bool "Architecture-specific test/set operation"
default n
---help---
Enables support for the BOARDIOC_SPINLOCK boardctl() command.
Architecture specific logic must provide up_testset() interface.
config BOARDCTL_IOCTL
bool "Board-specific boardctl() commands"
default n
---help---
Enables support for board-specific boardctl() commands.
Architecture specific logic must provide board_ioctl() interface.
endif # BOARDCTL
config BOARD_USBDEV_SERIALSTR
bool "Board-specific usbdev serial string"
default n
---help---
Use board unique serial number to iSerialNumber in the device descriptor.
config BOARD_MEMORY_RANGE
string "Board memory range"
default ""
---help---
Memory range of board. format: <start>,<end>,<flags>,....
start: start address of memory range
end: end address of memory range
flags: Readable 0x1, writable 0x2, executable 0x4
example:0x1000,0x2000,0x1,0x2000,0x3000,0x3,0x3000,0x4000,0x7
Reference in New Issue View Git Blame Copy Permalink