nuttx/boards/ea3131/configs/pgnsh/Make.defs
Alin Jerpelea 31e87abd1c Merged in alinjerpelea/nuttx (pull request #964)
move board configs to configs folder

* amber: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* arduino-due: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* arduino-mega: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* avr32dev1: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* axoloti: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* b-l072z-lrwan1: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* b-l475e-iot01a: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* bambino-200e: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* beaglebone-black: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* c5471evm: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* clicker2-stm32: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* cloudctrl: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* demo9s12ne64: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* dk-tm4c129x: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* ea3131: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* ea3152: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* eagle100: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* efm32-g8xx-stk: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* efm32gg-stk3700: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* ekk-lm3s9b96: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* esp32-core: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* ez80f910200kitg: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* ez80f910200zco: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* fire-stm32v2: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* flipnclick-pic32mz: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* flipnclick-sam3x: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* freedom-k28f: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* freedom-k64f: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* freedom-k66f: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* freedom-k125z: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* freedom-k126z: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* gapuino: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* hymini-stm32v: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* imxrt1050-evk: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* imxrt1060-evk: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* kwikstik-k40: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* launchxl-cc1310: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* launchxl-cc1312r1: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* launchxl-tms57004: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lc823450-xgevk: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lincoln60: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lm3s6432-s2e: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lm3s6965-ek: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lm3s8962-ek: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lm4f120-launchpad: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lpc4088-devkit: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lpc4088-quickstart: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lpc4330-xplorer: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lpc4337-ws: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lpc4357-evb: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lpc4370-link2: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lpcxpresso-lpc1768: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lpcxpresso-lpc54628: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* makerlisp: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* maple: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* max32660-evsys: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* mbed: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* mbc1700: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* mcu123-lpc214x: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* metro-m4: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* micropendous3: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* mikroe-stm32f4: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* mirtoo: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* misoc: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* moteino-mega: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* moxa: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* ne64badge: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nr5m100-nexys4: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nrf52-generic: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* ntosd-dm320: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-144: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-f072rb: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-f091rc: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-f103rb: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-f207zg: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-f302r8: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-f303re: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-f303ze: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-f334r8: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-f410rb: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-f446re: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-f4x1re: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-g071rb: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-h743zi: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-l073rz: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-l152re: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-l432kc: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-l452re: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-l476rg: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-l496zg: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nutiny-nuc120: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* olimex-efm32g880f128-stk: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* olimex-lpc-h3131: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* olimex-lpc1766stk: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* olimex-lpc2378: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* olimex-stm32-e407: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* olimex-stm32-h405: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* olimex-stm32-h407: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* olimex-stm32-p107: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* olimex-stm32-p207: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* olimex-stm32-p407: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* olimex-strp711: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* olimexino-stm32: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* omnibusf4: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* open1788: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* or1k: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* p112: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* pcduino-a10: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* photon: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* pic32mx-starterkit: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* pic32mx7mmb: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* pic32mz-starterkit: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* pnev5180b: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* qemu-i486: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* sabre-6quad: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* sam3u-ek: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* sam4cmp-db: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* sam4e-ek: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* sam4l-xplained: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* sam4s-xplained: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* sam4s-xplained-pro: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* sama5d2-xult: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* sama5d3-xplained: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* sama5d3x-ek: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* sama5d4-ek: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* samd20-xplained: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* samd21-xplained: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* same70-xplained: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* saml21-xplained: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* samv71-xult: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* shenzhou: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* sim: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* skp16c26: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* spresense: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm3210e-eval: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm3220g-eval: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm3240g-eval: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32_tiny: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32butterfly2: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32f051-discovery: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32f072-discovery: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32f103-minimum: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32f334-disco: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32f3discovery: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32f411e-disco: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32f429i-disco: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32f4discovery: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32f746-ws: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32f746g-disco: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32f769i-disco: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32l476-mdk: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32l476vg-disco: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32l4r9ai-disco: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32ldiscovery: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32vldiscovery: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* sure-pic32mx: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* teensy-2.0: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* teensy-3.x: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* teensy-lc: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* tm4c123g-launchpad: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* tm4c1294-launchpad: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* tms570ls31x-usb-kit: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* twr-k60n512: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* twr-k64f120m: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* u-blox-c027: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* ubw32: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* viewtool-stm32f107: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* us7032evb1: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* xmc4500-relax: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* z16f2800100zcog: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* z80sim: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* z8encore000zco: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* z8f64200100kit: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* zkit-arm-1769: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* zp214xpa: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* tools: configure.sh: adjust the script to use boards/configs folder

    Script update to pick the configs from the new configuration folder

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* tools: configure.bat: adjust the script to use boards/configs folder

    Now we update the script to pick the configs from the new configuration folder

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-08-05 14:30:34 +00:00

127 lines
4.6 KiB
Plaintext

############################################################################
# boards/ea3131/pgnsh/Make.defs
#
# Copyright (C) 2010,2012 Gregory Nutt. All rights reserved.
# Author: Gregory Nutt <gnutt@nuttx.org>
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in
# the documentation and/or other materials provided with the
# distribution.
# 3. Neither the name NuttX nor the names of its contributors may be
# used to endorse or promote products derived from this software
# without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
############################################################################
include ${TOPDIR}/.config
include ${TOPDIR}/tools/Config.mk
include ${TOPDIR}/arch/arm/src/arm/Toolchain.defs
ifeq ($(WINTOOL),y)
# Windows-native toolchains
DIRLINK = $(TOPDIR)/tools/copydir.sh
DIRUNLINK = $(TOPDIR)/tools/unlink.sh
MKDEP = $(TOPDIR)/tools/mkwindeps.sh
ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}"
ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}"
ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/boards/$(CONFIG_ARCH_BOARD)/scripts/pg-ld.script}"
else
# Linux/Cygwin-native toolchain
MKDEP = $(TOPDIR)/tools/mkdeps$(HOSTEXEEXT)
ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
ARCHSCRIPT = -T$(TOPDIR)/boards/$(CONFIG_ARCH_BOARD)/scripts/pg-ld.script
endif
CC = $(CROSSDEV)gcc
CXX = $(CROSSDEV)g++
CPP = $(CROSSDEV)gcc -E
LD = $(CROSSDEV)ld
STRIP = $(CROSSDEV)strip --strip-unneeded
AR = $(CROSSDEV)ar rcs
NM = $(CROSSDEV)nm
OBJCOPY = $(CROSSDEV)objcopy
OBJDUMP = $(CROSSDEV)objdump
ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'}
ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1}
ifeq ($(ARCHCCMAJOR),2)
OLDGCC = y
else ifeq ($(ARCHCCMAJOR),3)
OLDGCC = y
else
OLDGCC = n
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
ARCHOPTIMIZATION = -g
endif
ifneq ($(CONFIG_DEBUG_NOOPT),y)
ARCHOPTIMIZATION += $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer
endif
ifeq ($(OLDGCC),n)
ARCHCPUFLAGS = -mtune=arm9tdmi -march=armv5te -mfloat-abi=soft -fno-builtin
else
ARCHCPUFLAGS = -mapcs-32 -mtune=arm9tdmi -march=armv5te -msoft-float -fno-builtin
endif
ARCHCFLAGS = -fno-builtin
ARCHCXXFLAGS = -fno-builtin -fno-exceptions -fcheck-new
ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow -Wundef
ARCHWARNINGSXX = -Wall -Wshadow -Wundef
ARCHDEFINES =
ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10
CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS)
CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS)
CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES)
AFLAGS = $(CFLAGS) -D__ASSEMBLY__
NXFLATLDFLAGS1 = -r -d -warn-common
NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat-gotoff.ld -no-check-sections
LDNXFLATFLAGS = -e main -s 2048
ASMEXT = .S
OBJEXT = .o
LIBEXT = .a
EXEEXT =
ifneq ($(CONFIG_ARM_TOOLCHAIN_BUILDROOT),y)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
LDFLAGS += -g
endif
HOSTCC = gcc
HOSTINCLUDES = -I.
HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -Wundef -g -pipe
HOSTLDFLAGS =