move board configs to configs folder
* amber: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* arduino-due: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* arduino-mega: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* avr32dev1: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* axoloti: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* b-l072z-lrwan1: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* b-l475e-iot01a: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* bambino-200e: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* beaglebone-black: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* c5471evm: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* clicker2-stm32: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* cloudctrl: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* demo9s12ne64: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* dk-tm4c129x: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* ea3131: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* ea3152: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* eagle100: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* efm32-g8xx-stk: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* efm32gg-stk3700: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* ekk-lm3s9b96: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* esp32-core: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* ez80f910200kitg: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* ez80f910200zco: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* fire-stm32v2: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* flipnclick-pic32mz: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* flipnclick-sam3x: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* freedom-k28f: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* freedom-k64f: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* freedom-k66f: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* freedom-k125z: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* freedom-k126z: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* gapuino: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* hymini-stm32v: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* imxrt1050-evk: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* imxrt1060-evk: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* kwikstik-k40: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* launchxl-cc1310: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* launchxl-cc1312r1: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* launchxl-tms57004: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* lc823450-xgevk: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* lincoln60: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* lm3s6432-s2e: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* lm3s6965-ek: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* lm3s8962-ek: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* lm4f120-launchpad: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* lpc4088-devkit: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* lpc4088-quickstart: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* lpc4330-xplorer: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* lpc4337-ws: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* lpc4357-evb: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* lpc4370-link2: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* lpcxpresso-lpc1768: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* lpcxpresso-lpc54628: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* makerlisp: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* maple: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* max32660-evsys: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* mbed: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* mbc1700: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* mcu123-lpc214x: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* metro-m4: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* micropendous3: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* mikroe-stm32f4: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* mirtoo: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* misoc: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* moteino-mega: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* moxa: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* ne64badge: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* nr5m100-nexys4: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* nrf52-generic: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* ntosd-dm320: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* nucleo-144: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* nucleo-f072rb: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* nucleo-f091rc: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* nucleo-f103rb: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* nucleo-f207zg: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* nucleo-f302r8: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* nucleo-f303re: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* nucleo-f303ze: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* nucleo-f334r8: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* nucleo-f410rb: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* nucleo-f446re: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* nucleo-f4x1re: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* nucleo-g071rb: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* nucleo-h743zi: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* nucleo-l073rz: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* nucleo-l152re: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* nucleo-l432kc: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* nucleo-l452re: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* nucleo-l476rg: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* nucleo-l496zg: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* nutiny-nuc120: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* olimex-efm32g880f128-stk: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* olimex-lpc-h3131: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* olimex-lpc1766stk: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* olimex-lpc2378: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* olimex-stm32-e407: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* olimex-stm32-h405: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* olimex-stm32-h407: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* olimex-stm32-p107: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* olimex-stm32-p207: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* olimex-stm32-p407: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* olimex-strp711: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* olimexino-stm32: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* omnibusf4: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* open1788: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* or1k: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* p112: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* pcduino-a10: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* photon: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* pic32mx-starterkit: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* pic32mx7mmb: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* pic32mz-starterkit: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* pnev5180b: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* qemu-i486: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* sabre-6quad: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* sam3u-ek: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* sam4cmp-db: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* sam4e-ek: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* sam4l-xplained: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* sam4s-xplained: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* sam4s-xplained-pro: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* sama5d2-xult: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* sama5d3-xplained: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* sama5d3x-ek: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* sama5d4-ek: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* samd20-xplained: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* samd21-xplained: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* same70-xplained: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* saml21-xplained: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* samv71-xult: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* shenzhou: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* sim: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* skp16c26: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* spresense: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* stm3210e-eval: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* stm3220g-eval: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* stm3240g-eval: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* stm32_tiny: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* stm32butterfly2: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* stm32f051-discovery: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* stm32f072-discovery: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* stm32f103-minimum: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* stm32f334-disco: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* stm32f3discovery: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* stm32f411e-disco: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* stm32f429i-disco: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* stm32f4discovery: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* stm32f746-ws: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* stm32f746g-disco: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* stm32f769i-disco: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* stm32l476-mdk: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* stm32l476vg-disco: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* stm32l4r9ai-disco: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* stm32ldiscovery: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* stm32vldiscovery: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* sure-pic32mx: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* teensy-2.0: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* teensy-3.x: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* teensy-lc: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* tm4c123g-launchpad: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* tm4c1294-launchpad: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* tms570ls31x-usb-kit: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* twr-k60n512: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* twr-k64f120m: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* u-blox-c027: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* ubw32: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* viewtool-stm32f107: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* us7032evb1: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* xmc4500-relax: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* z16f2800100zcog: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* z80sim: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* z8encore000zco: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* z8f64200100kit: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* zkit-arm-1769: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* zp214xpa: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* tools: configure.sh: adjust the script to use boards/configs folder
Script update to pick the configs from the new configuration folder
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* tools: configure.bat: adjust the script to use boards/configs folder
Now we update the script to pick the configs from the new configuration folder
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Approved-by: Gregory Nutt <gnutt@nuttx.org>
31e87abd1c