31e87abd1c
move board configs to configs folder * amber: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * arduino-due: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * arduino-mega: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * avr32dev1: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * axoloti: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * b-l072z-lrwan1: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * b-l475e-iot01a: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * bambino-200e: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * beaglebone-black: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * c5471evm: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * clicker2-stm32: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * cloudctrl: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * demo9s12ne64: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * dk-tm4c129x: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * ea3131: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * ea3152: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * eagle100: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * efm32-g8xx-stk: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * efm32gg-stk3700: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * ekk-lm3s9b96: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * esp32-core: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * ez80f910200kitg: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * ez80f910200zco: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * fire-stm32v2: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * flipnclick-pic32mz: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * flipnclick-sam3x: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * freedom-k28f: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * freedom-k64f: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * freedom-k66f: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * freedom-k125z: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * freedom-k126z: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * gapuino: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * hymini-stm32v: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * imxrt1050-evk: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * imxrt1060-evk: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * kwikstik-k40: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * launchxl-cc1310: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * launchxl-cc1312r1: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * launchxl-tms57004: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * lc823450-xgevk: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * lincoln60: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * lm3s6432-s2e: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * lm3s6965-ek: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * lm3s8962-ek: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * lm4f120-launchpad: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * lpc4088-devkit: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * lpc4088-quickstart: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * lpc4330-xplorer: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * lpc4337-ws: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * lpc4357-evb: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * lpc4370-link2: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * lpcxpresso-lpc1768: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * lpcxpresso-lpc54628: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * makerlisp: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * maple: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * max32660-evsys: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * mbed: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * mbc1700: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * mcu123-lpc214x: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * metro-m4: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * micropendous3: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * mikroe-stm32f4: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * mirtoo: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * misoc: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * moteino-mega: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * moxa: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * ne64badge: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nr5m100-nexys4: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nrf52-generic: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * ntosd-dm320: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nucleo-144: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nucleo-f072rb: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nucleo-f091rc: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nucleo-f103rb: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nucleo-f207zg: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nucleo-f302r8: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nucleo-f303re: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nucleo-f303ze: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nucleo-f334r8: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nucleo-f410rb: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nucleo-f446re: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nucleo-f4x1re: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nucleo-g071rb: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nucleo-h743zi: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nucleo-l073rz: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nucleo-l152re: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nucleo-l432kc: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nucleo-l452re: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nucleo-l476rg: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nucleo-l496zg: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nutiny-nuc120: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * olimex-efm32g880f128-stk: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * olimex-lpc-h3131: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * olimex-lpc1766stk: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * olimex-lpc2378: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * olimex-stm32-e407: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * olimex-stm32-h405: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * olimex-stm32-h407: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * olimex-stm32-p107: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * olimex-stm32-p207: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * olimex-stm32-p407: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * olimex-strp711: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * olimexino-stm32: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * omnibusf4: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * open1788: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * or1k: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * p112: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * pcduino-a10: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * photon: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * pic32mx-starterkit: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * pic32mx7mmb: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * pic32mz-starterkit: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * pnev5180b: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * qemu-i486: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * sabre-6quad: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * sam3u-ek: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * sam4cmp-db: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * sam4e-ek: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * sam4l-xplained: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * sam4s-xplained: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * sam4s-xplained-pro: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * sama5d2-xult: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * sama5d3-xplained: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * sama5d3x-ek: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * sama5d4-ek: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * samd20-xplained: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * samd21-xplained: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * same70-xplained: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * saml21-xplained: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * samv71-xult: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * shenzhou: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * sim: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * skp16c26: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * spresense: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm3210e-eval: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm3220g-eval: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm3240g-eval: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32_tiny: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32butterfly2: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32f051-discovery: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32f072-discovery: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32f103-minimum: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32f334-disco: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32f3discovery: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32f411e-disco: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32f429i-disco: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32f4discovery: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32f746-ws: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32f746g-disco: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32f769i-disco: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32l476-mdk: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32l476vg-disco: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32l4r9ai-disco: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32ldiscovery: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32vldiscovery: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * sure-pic32mx: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * teensy-2.0: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * teensy-3.x: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * teensy-lc: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * tm4c123g-launchpad: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * tm4c1294-launchpad: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * tms570ls31x-usb-kit: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * twr-k60n512: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * twr-k64f120m: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * u-blox-c027: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * ubw32: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * viewtool-stm32f107: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * us7032evb1: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * xmc4500-relax: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * z16f2800100zcog: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * z80sim: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * z8encore000zco: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * z8f64200100kit: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * zkit-arm-1769: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * zp214xpa: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * tools: configure.sh: adjust the script to use boards/configs folder Script update to pick the configs from the new configuration folder Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * tools: configure.bat: adjust the script to use boards/configs folder Now we update the script to pick the configs from the new configuration folder Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> Approved-by: Gregory Nutt <gnutt@nuttx.org>
137 lines
4.2 KiB
Plaintext
137 lines
4.2 KiB
Plaintext
############################################################################
|
|
# boards/sim/cxxtest/Make.defs
|
|
#
|
|
# Copyright (C) 2012 Gregory Nutt. All rights reserved.
|
|
# Author: Gregory Nutt <gnutt@nuttx.org>
|
|
#
|
|
# Redistribution and use in source and binary forms, with or without
|
|
# modification, are permitted provided that the following conditions
|
|
# are met:
|
|
#
|
|
# 1. Redistributions of source code must retain the above copyright
|
|
# notice, this list of conditions and the following disclaimer.
|
|
# 2. Redistributions in binary form must reproduce the above copyright
|
|
# notice, this list of conditions and the following disclaimer in
|
|
# the documentation and/or other materials provided with the
|
|
# distribution.
|
|
# 3. Neither the name NuttX nor the names of its contributors may be
|
|
# used to endorse or promote products derived from this software
|
|
# without specific prior written permission.
|
|
#
|
|
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
|
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
|
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
|
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
|
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
|
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
|
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
# POSSIBILITY OF SUCH DAMAGE.
|
|
#
|
|
############################################################################
|
|
|
|
include ${TOPDIR}/.config
|
|
include ${TOPDIR}/tools/Config.mk
|
|
|
|
HOSTOS = ${shell uname -o 2>/dev/null || echo "Other"}
|
|
|
|
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
|
|
ARCHOPTIMIZATION = -g
|
|
endif
|
|
|
|
ifneq ($(CONFIG_DEBUG_NOOPT),y)
|
|
ARCHOPTIMIZATION += -O2
|
|
endif
|
|
|
|
ARCHCPUFLAGS = -fno-builtin
|
|
ifeq ($(CONFIG_UCLIBCXX_EXCEPTION),y)
|
|
ARCHCPUFLAGSXX = -fno-builtin
|
|
else
|
|
ARCHCPUFLAGSXX = -fno-builtin -fno-exceptions -fcheck-new
|
|
endif
|
|
ARCHPICFLAGS = -fpic
|
|
ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow -Wundef
|
|
ARCHWARNINGSXX = -Wall -Wshadow -Wundef
|
|
ARCHDEFINES =
|
|
ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
|
|
ARCHINCLUDESXX = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx -isystem $(TOPDIR)/include/uClibc++
|
|
ARCHSCRIPT =
|
|
|
|
ifeq ($(CONFIG_SIM_M32),y)
|
|
ARCHCPUFLAGS += -m32
|
|
ARCHCPUFLAGSXX += -m32
|
|
endif
|
|
|
|
CROSSDEV =
|
|
CC = $(CROSSDEV)gcc
|
|
CXX = $(CROSSDEV)g++
|
|
CPP = $(CROSSDEV)gcc -E
|
|
LD = $(CROSSDEV)ld
|
|
STRIP = $(CROSSDEV)strip --strip-unneeded
|
|
AR = $(CROSSDEV)ar rcs
|
|
NM = $(CROSSDEV)nm
|
|
OBJCOPY = $(CROSSDEV)objcopy
|
|
OBJDUMP = $(CROSSDEV)objdump
|
|
|
|
CFLAGS = $(ARCHWARNINGS) $(ARCHOPTIMIZATION) \
|
|
$(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
|
|
CXXFLAGS = $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) \
|
|
$(ARCHCPUFLAGSXX) $(ARCHINCLUDESXX) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
|
|
CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES)
|
|
AFLAGS = $(CFLAGS) -D__ASSEMBLY__
|
|
|
|
|
|
# ELF module definitions
|
|
|
|
CELFFLAGS = $(CFLAGS)
|
|
CXXELFFLAGS = $(CXXFLAGS)
|
|
|
|
LDELFFLAGS = -r -e main
|
|
ifeq ($(WINTOOL),y)
|
|
LDELFFLAGS += -T "${shell cygpath -w $(TOPDIR)/boards/$(CONFIG_ARCH_BOARD)/scripts/gnu-elf.ld}"
|
|
else
|
|
LDELFFLAGS += -T $(TOPDIR)/boards/$(CONFIG_ARCH_BOARD)/scripts/gnu-elf.ld
|
|
endif
|
|
|
|
|
|
ASMEXT = .S
|
|
OBJEXT = .o
|
|
LIBEXT = .a
|
|
|
|
ifeq ($(HOSTOS),Cygwin)
|
|
EXEEXT = .exe
|
|
else
|
|
EXEEXT =
|
|
endif
|
|
|
|
LDLINKFLAGS = $(ARCHSCRIPT) # Link flags used with $(LD)
|
|
CCLINKFLAGS = $(ARCHSCRIPT) # Link flags used with $(CC)
|
|
LDFLAGS = $(ARCHSCRIPT) # For backward compatibility, same as CCLINKFLAGS
|
|
|
|
LIBSUPXX = ${shell $(CC) $(CXXFLAGS) --print-file-name=libsupc++.a}
|
|
EXTRA_LIBPATHS = -L "${shell dirname "$(LIBSUPXX)"}"
|
|
EXTRA_LIBS = -lsupc++
|
|
|
|
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
|
|
LDLINKFLAGS += -g
|
|
CCLINKFLAGS += -g
|
|
LDFLAGS += -g
|
|
endif
|
|
|
|
ifeq ($(CONFIG_SIM_M32),y)
|
|
LDLINKFLAGS += -melf_i386
|
|
CCLINKFLAGS += -m32
|
|
LDFLAGS += -m32
|
|
endif
|
|
|
|
MKDEP = $(TOPDIR)/tools/mkdeps$(HOSTEXEEXT)
|
|
|
|
HOSTCC = gcc
|
|
HOSTINCLUDES = -I.
|
|
HOSTCFLAGS = $(ARCHWARNINGS) $(ARCHOPTIMIZATION) \
|
|
$(ARCHCPUFLAGS) $(HOSTINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
|
|
HOSTLDFLAGS =
|