sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
aa49f831be
nuttx/boards/stm3210e-eval/configs/usbserial/defconfig
Alin Jerpelea 31e87abd1c Merged in alinjerpelea/nuttx (pull request #964) 
move board configs to configs folder

* amber: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* arduino-due: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* arduino-mega: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* avr32dev1: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* axoloti: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* b-l072z-lrwan1: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* b-l475e-iot01a: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* bambino-200e: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* beaglebone-black: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* c5471evm: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* clicker2-stm32: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* cloudctrl: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* demo9s12ne64: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* dk-tm4c129x: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* ea3131: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* ea3152: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* eagle100: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* efm32-g8xx-stk: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* efm32gg-stk3700: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* ekk-lm3s9b96: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* esp32-core: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* ez80f910200kitg: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* ez80f910200zco: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* fire-stm32v2: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* flipnclick-pic32mz: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* flipnclick-sam3x: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* freedom-k28f: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* freedom-k64f: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* freedom-k66f: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* freedom-k125z: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* freedom-k126z: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* gapuino: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* hymini-stm32v: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* imxrt1050-evk: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* imxrt1060-evk: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* kwikstik-k40: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* launchxl-cc1310: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* launchxl-cc1312r1: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* launchxl-tms57004: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lc823450-xgevk: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lincoln60: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lm3s6432-s2e: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lm3s6965-ek: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lm3s8962-ek: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lm4f120-launchpad: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lpc4088-devkit: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lpc4088-quickstart: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lpc4330-xplorer: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lpc4337-ws: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lpc4357-evb: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lpc4370-link2: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lpcxpresso-lpc1768: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lpcxpresso-lpc54628: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* makerlisp: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* maple: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* max32660-evsys: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* mbed: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* mbc1700: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* mcu123-lpc214x: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* metro-m4: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* micropendous3: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* mikroe-stm32f4: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* mirtoo: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* misoc: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* moteino-mega: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* moxa: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* ne64badge: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nr5m100-nexys4: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nrf52-generic: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* ntosd-dm320: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-144: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-f072rb: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-f091rc: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-f103rb: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-f207zg: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-f302r8: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-f303re: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-f303ze: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-f334r8: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-f410rb: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-f446re: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-f4x1re: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-g071rb: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-h743zi: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-l073rz: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-l152re: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-l432kc: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-l452re: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-l476rg: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-l496zg: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nutiny-nuc120: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* olimex-efm32g880f128-stk: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* olimex-lpc-h3131: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* olimex-lpc1766stk: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* olimex-lpc2378: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* olimex-stm32-e407: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* olimex-stm32-h405: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* olimex-stm32-h407: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* olimex-stm32-p107: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* olimex-stm32-p207: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* olimex-stm32-p407: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* olimex-strp711: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* olimexino-stm32: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* omnibusf4: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* open1788: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* or1k: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* p112: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* pcduino-a10: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* photon: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* pic32mx-starterkit: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* pic32mx7mmb: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* pic32mz-starterkit: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* pnev5180b: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* qemu-i486: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* sabre-6quad: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* sam3u-ek: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* sam4cmp-db: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* sam4e-ek: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* sam4l-xplained: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* sam4s-xplained: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* sam4s-xplained-pro: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* sama5d2-xult: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* sama5d3-xplained: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* sama5d3x-ek: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* sama5d4-ek: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* samd20-xplained: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* samd21-xplained: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* same70-xplained: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* saml21-xplained: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* samv71-xult: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* shenzhou: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* sim: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* skp16c26: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* spresense: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm3210e-eval: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm3220g-eval: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm3240g-eval: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32_tiny: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32butterfly2: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32f051-discovery: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32f072-discovery: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32f103-minimum: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32f334-disco: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32f3discovery: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32f411e-disco: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32f429i-disco: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32f4discovery: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32f746-ws: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32f746g-disco: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32f769i-disco: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32l476-mdk: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32l476vg-disco: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32l4r9ai-disco: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32ldiscovery: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32vldiscovery: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* sure-pic32mx: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* teensy-2.0: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* teensy-3.x: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* teensy-lc: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* tm4c123g-launchpad: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* tm4c1294-launchpad: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* tms570ls31x-usb-kit: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* twr-k60n512: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* twr-k64f120m: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* u-blox-c027: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* ubw32: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* viewtool-stm32f107: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* us7032evb1: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* xmc4500-relax: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* z16f2800100zcog: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* z80sim: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* z8encore000zco: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* z8f64200100kit: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* zkit-arm-1769: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* zp214xpa: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* tools: configure.sh: adjust the script to use boards/configs folder

    Script update to pick the configs from the new configuration folder

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* tools: configure.bat: adjust the script to use boards/configs folder

    Now we update the script to pick the configs from the new configuration folder

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-08-05 14:30:34 +00:00

50 lines
1.3 KiB
Plaintext
Raw Blame History

#
# This file is autogenerated: PLEASE DO NOT EDIT IT.
#
# You can use "make menuconfig" to make any modifications to the installed .config file.
# You can then do "make savedefconfig" to generate a new defconfig file that includes your
# modifications.
#
CONFIG_ARCH="arm"
CONFIG_ARCH_BOARD="stm3210e-eval"
CONFIG_ARCH_BOARD_STM3210E_EVAL=y
CONFIG_ARCH_CHIP_STM32=y
CONFIG_ARCH_CHIP_STM32F103ZE=y
CONFIG_ARCH_STACKDUMP=y
CONFIG_ARMV7M_OABI_TOOLCHAIN=y
CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT=y
CONFIG_BOARD_LOOPSPERMSEC=5483
CONFIG_DISABLE_MOUNTPOINT=y
CONFIG_EXAMPLES_USBSERIAL=y
CONFIG_INTELHEX_BINARY=y
CONFIG_LIB_BOARDCTL=y
CONFIG_MAX_TASKS=16
CONFIG_MAX_WDOGPARMS=2
CONFIG_NFILE_DESCRIPTORS=8
CONFIG_NFILE_STREAMS=8
CONFIG_PL2303=y
CONFIG_PL2303_PRODUCTSTR="USBdev Serial"
CONFIG_PL2303_RXBUFSIZE=512
CONFIG_PL2303_TXBUFSIZE=512
CONFIG_PL2303_VENDORSTR="Nuttx"
CONFIG_PREALLOC_MQ_MSGS=4
CONFIG_PREALLOC_TIMERS=4
CONFIG_PREALLOC_WDOGS=8
CONFIG_RAM_SIZE=65536
CONFIG_RAM_START=0x20000000
CONFIG_RR_INTERVAL=200
CONFIG_SDCLONE_DISABLE=y
CONFIG_START_DAY=23
CONFIG_START_MONTH=10
CONFIG_START_YEAR=2009
CONFIG_STM32_DFU=y
CONFIG_STM32_FSMC=y
CONFIG_STM32_JTAG_FULL_ENABLE=y
CONFIG_STM32_USART1=y
CONFIG_STM32_USART2=y
CONFIG_STM32_USB=y
CONFIG_TASK_NAME_SIZE=0
CONFIG_USART1_SERIAL_CONSOLE=y
CONFIG_USER_ENTRYPOINT="usbserial_main"
CONFIG_WDOG_INTRESERVE=1
Reference in New Issue View Git Blame Copy Permalink