a1c991d921
Move boards to boards folder
* boards: rename configs folder to boards
This is the proposed layout after the change:
boards: - folder containing board folders
<board>: - name of each board
drivers: - extra drivers specific for platform
include: - header files for the boars
scripts: - extra scripts specific for platform
src: - board specific code
tools: - extra tools specific for platform
<config>: - board specific configuration(s)
Note:
<xxx> names are dependent on platform
This is a logical change to aim to the arch layout but this is a
huge change it should be done in several steps to lower the risk.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* Kconfig: replace configs with boards
The change is needed after the path change
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* Makefile: replace configs with boards
The change is needed after the path change
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* Makefile.*: replace configs with boards
The change is needed after the path change
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* Make.defs: replace configs with boards
The change is needed after the path change
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* .sh: replace configs with boards
The change is needed after the path change
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* .mk: replace configs with boards
The change is needed after the path change
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* .c & .h: replace configs with boards
The change is needed after the path change
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* .bat: replace configs with boards
The change is needed after the path change
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Approved-by: Gregory Nutt <gnutt@nuttx.org>
26 lines
1.2 KiB
Plaintext
26 lines
1.2 KiB
Plaintext
https://www.olimex.com/dev/pdf/ARM/JTAG/Repair%20Procedure%20for%20OpenOcd-Rev.%20G%20drivers.pdf
|
|
|
|
Repair procedure for ARM-USB-OCD drivers
|
|
|
|
1. Uninstalling ARM-USB-OCD drivers
|
|
-------------------------------------
|
|
1.1. Connect your programmer/debugger to your computer, open Device Manager
|
|
and uninstall the drivers for ARM-USB-OCD.
|
|
1.2. After you have uninstalled ARM-USB-TINY driver from Device Manager,
|
|
disconnect the programmer from your computer.
|
|
1.3. Now you should download FTClean.exe from here:
|
|
http://www.ftdichip.com/Support/Utilities/FTClean.zip.
|
|
1.4. After download is complete extract the "*.zip" file, open folder FTClean,
|
|
and run FTClean.exe
|
|
1.5. Ror VID (Hex) select "Other". And after that fill the first box with 15ba
|
|
and "PID (Hex)" with 0004.
|
|
1.6. Press "Clean System" button. Make sure that all FTDI devices are
|
|
disconnected. (My require administrator privileges).
|
|
|
|
2. Re-installing the ARM-USB-OCD driver
|
|
---------------------------------------
|
|
2.1 Connect the programmer/debugger to the computer.
|
|
2.2 When prompted, browse to the C:\gccfd\DRIVERS\ARM-USB-OCD-DRIVER
|
|
directory and install. (A different driver is required for OpenOCD
|
|
0.4.0. That driver is available from the olimex.com web site).
|