sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
aa49f831be
nuttx/boards/stm32f051-discovery
History
Alin Jerpelea 31e87abd1c Merged in alinjerpelea/nuttx (pull request #964) 
move board configs to configs folder

* amber: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* arduino-due: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* arduino-mega: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* avr32dev1: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* axoloti: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* b-l072z-lrwan1: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* b-l475e-iot01a: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* bambino-200e: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* beaglebone-black: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* c5471evm: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* clicker2-stm32: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* cloudctrl: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* demo9s12ne64: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* dk-tm4c129x: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* ea3131: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* ea3152: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* eagle100: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* efm32-g8xx-stk: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* efm32gg-stk3700: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* ekk-lm3s9b96: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* esp32-core: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* ez80f910200kitg: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* ez80f910200zco: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* fire-stm32v2: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* flipnclick-pic32mz: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* flipnclick-sam3x: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* freedom-k28f: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* freedom-k64f: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* freedom-k66f: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* freedom-k125z: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* freedom-k126z: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* gapuino: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* hymini-stm32v: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* imxrt1050-evk: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* imxrt1060-evk: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* kwikstik-k40: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* launchxl-cc1310: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* launchxl-cc1312r1: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* launchxl-tms57004: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lc823450-xgevk: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lincoln60: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lm3s6432-s2e: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lm3s6965-ek: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lm3s8962-ek: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lm4f120-launchpad: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lpc4088-devkit: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lpc4088-quickstart: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lpc4330-xplorer: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lpc4337-ws: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lpc4357-evb: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lpc4370-link2: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lpcxpresso-lpc1768: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lpcxpresso-lpc54628: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* makerlisp: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* maple: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* max32660-evsys: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* mbed: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* mbc1700: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* mcu123-lpc214x: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* metro-m4: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* micropendous3: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* mikroe-stm32f4: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* mirtoo: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* misoc: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* moteino-mega: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* moxa: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* ne64badge: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nr5m100-nexys4: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nrf52-generic: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* ntosd-dm320: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-144: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-f072rb: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-f091rc: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-f103rb: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-f207zg: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-f302r8: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-f303re: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-f303ze: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-f334r8: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-f410rb: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-f446re: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-f4x1re: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-g071rb: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-h743zi: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-l073rz: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-l152re: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-l432kc: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-l452re: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-l476rg: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-l496zg: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nutiny-nuc120: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* olimex-efm32g880f128-stk: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* olimex-lpc-h3131: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* olimex-lpc1766stk: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* olimex-lpc2378: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* olimex-stm32-e407: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* olimex-stm32-h405: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* olimex-stm32-h407: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* olimex-stm32-p107: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* olimex-stm32-p207: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* olimex-stm32-p407: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* olimex-strp711: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* olimexino-stm32: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* omnibusf4: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* open1788: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* or1k: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* p112: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* pcduino-a10: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* photon: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* pic32mx-starterkit: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* pic32mx7mmb: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* pic32mz-starterkit: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* pnev5180b: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* qemu-i486: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* sabre-6quad: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* sam3u-ek: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* sam4cmp-db: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* sam4e-ek: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* sam4l-xplained: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* sam4s-xplained: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* sam4s-xplained-pro: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* sama5d2-xult: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* sama5d3-xplained: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* sama5d3x-ek: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* sama5d4-ek: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* samd20-xplained: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* samd21-xplained: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* same70-xplained: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* saml21-xplained: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* samv71-xult: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* shenzhou: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* sim: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* skp16c26: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* spresense: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm3210e-eval: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm3220g-eval: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm3240g-eval: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32_tiny: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32butterfly2: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32f051-discovery: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32f072-discovery: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32f103-minimum: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32f334-disco: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32f3discovery: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32f411e-disco: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32f429i-disco: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32f4discovery: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32f746-ws: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32f746g-disco: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32f769i-disco: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32l476-mdk: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32l476vg-disco: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32l4r9ai-disco: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32ldiscovery: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32vldiscovery: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* sure-pic32mx: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* teensy-2.0: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* teensy-3.x: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* teensy-lc: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* tm4c123g-launchpad: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* tm4c1294-launchpad: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* tms570ls31x-usb-kit: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* twr-k60n512: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* twr-k64f120m: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* u-blox-c027: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* ubw32: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* viewtool-stm32f107: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* us7032evb1: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* xmc4500-relax: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* z16f2800100zcog: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* z80sim: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* z8encore000zco: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* z8f64200100kit: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* zkit-arm-1769: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* zp214xpa: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* tools: configure.sh: adjust the script to use boards/configs folder

    Script update to pick the configs from the new configuration folder

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* tools: configure.bat: adjust the script to use boards/configs folder

    Now we update the script to pick the configs from the new configuration folder

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-08-05 14:30:34 +00:00
..
configs/nsh Merged in alinjerpelea/nuttx (pull request #964) 2019-08-05 14:30:34 +00:00
include
scripts
src
Kconfig
README.txt

README.txt 

STATUS
======

05/17: The basic NSH configuration is functional and shows that there is
       3-4KB of free heap space.  However, attempts to extend this have
       failed.  I suspect that 8KB of SRAM is insufficient to do much
       with the existing NSH configuration.  Perhaps some fine tuning
       can improve this situation but at this point, I think this board
       is only useful for the initial STM32 F0 bring-up, perhaps for
       embedded solutions that do not use NSH and for general
       experimentation.

       There is also support for the Nucleo boards with the STM32 F072
       and F092 MCUs.  Those ports do not suffer from these problems and
       seem to work well in fairly complex configurations.  Apparently 8KB
       is SRAM is not usable but the parts with larger 16KB and 32KB SRAMs
       are better matches.