sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
aa49f831be
nuttx/boards/z8encore000zco/configs/ostest/ostest.zdsproj
Alin Jerpelea 31e87abd1c Merged in alinjerpelea/nuttx (pull request #964) 
move board configs to configs folder

* amber: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* arduino-due: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* arduino-mega: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* avr32dev1: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* axoloti: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* b-l072z-lrwan1: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* b-l475e-iot01a: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* bambino-200e: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* beaglebone-black: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* c5471evm: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* clicker2-stm32: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* cloudctrl: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* demo9s12ne64: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* dk-tm4c129x: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* ea3131: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* ea3152: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* eagle100: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* efm32-g8xx-stk: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* efm32gg-stk3700: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* ekk-lm3s9b96: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* esp32-core: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* ez80f910200kitg: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* ez80f910200zco: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* fire-stm32v2: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* flipnclick-pic32mz: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* flipnclick-sam3x: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* freedom-k28f: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* freedom-k64f: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* freedom-k66f: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* freedom-k125z: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* freedom-k126z: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* gapuino: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* hymini-stm32v: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* imxrt1050-evk: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* imxrt1060-evk: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* kwikstik-k40: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* launchxl-cc1310: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* launchxl-cc1312r1: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* launchxl-tms57004: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lc823450-xgevk: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lincoln60: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lm3s6432-s2e: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lm3s6965-ek: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lm3s8962-ek: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lm4f120-launchpad: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lpc4088-devkit: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lpc4088-quickstart: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lpc4330-xplorer: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lpc4337-ws: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lpc4357-evb: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lpc4370-link2: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lpcxpresso-lpc1768: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lpcxpresso-lpc54628: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* makerlisp: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* maple: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* max32660-evsys: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* mbed: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* mbc1700: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* mcu123-lpc214x: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* metro-m4: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* micropendous3: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* mikroe-stm32f4: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* mirtoo: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* misoc: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* moteino-mega: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* moxa: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* ne64badge: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nr5m100-nexys4: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nrf52-generic: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* ntosd-dm320: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-144: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-f072rb: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-f091rc: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-f103rb: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-f207zg: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-f302r8: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-f303re: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-f303ze: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-f334r8: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-f410rb: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-f446re: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-f4x1re: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-g071rb: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-h743zi: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-l073rz: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-l152re: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-l432kc: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-l452re: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-l476rg: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-l496zg: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nutiny-nuc120: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* olimex-efm32g880f128-stk: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* olimex-lpc-h3131: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* olimex-lpc1766stk: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* olimex-lpc2378: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* olimex-stm32-e407: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* olimex-stm32-h405: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* olimex-stm32-h407: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* olimex-stm32-p107: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* olimex-stm32-p207: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* olimex-stm32-p407: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* olimex-strp711: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* olimexino-stm32: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* omnibusf4: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* open1788: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* or1k: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* p112: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* pcduino-a10: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* photon: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* pic32mx-starterkit: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* pic32mx7mmb: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* pic32mz-starterkit: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* pnev5180b: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* qemu-i486: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* sabre-6quad: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* sam3u-ek: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* sam4cmp-db: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* sam4e-ek: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* sam4l-xplained: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* sam4s-xplained: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* sam4s-xplained-pro: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* sama5d2-xult: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* sama5d3-xplained: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* sama5d3x-ek: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* sama5d4-ek: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* samd20-xplained: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* samd21-xplained: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* same70-xplained: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* saml21-xplained: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* samv71-xult: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* shenzhou: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* sim: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* skp16c26: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* spresense: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm3210e-eval: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm3220g-eval: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm3240g-eval: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32_tiny: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32butterfly2: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32f051-discovery: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32f072-discovery: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32f103-minimum: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32f334-disco: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32f3discovery: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32f411e-disco: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32f429i-disco: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32f4discovery: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32f746-ws: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32f746g-disco: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32f769i-disco: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32l476-mdk: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32l476vg-disco: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32l4r9ai-disco: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32ldiscovery: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32vldiscovery: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* sure-pic32mx: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* teensy-2.0: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* teensy-3.x: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* teensy-lc: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* tm4c123g-launchpad: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* tm4c1294-launchpad: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* tms570ls31x-usb-kit: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* twr-k60n512: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* twr-k64f120m: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* u-blox-c027: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* ubw32: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* viewtool-stm32f107: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* us7032evb1: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* xmc4500-relax: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* z16f2800100zcog: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* z80sim: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* z8encore000zco: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* z8f64200100kit: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* zkit-arm-1769: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* zp214xpa: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* tools: configure.sh: adjust the script to use boards/configs folder

    Script update to pick the configs from the new configuration folder

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* tools: configure.bat: adjust the script to use boards/configs folder

    Now we update the script to pick the configs from the new configuration folder

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-08-05 14:30:34 +00:00

291 lines
15 KiB
Plaintext
Raw Blame History

<project type="Standard" project-type="Standard" configuration="Debug" created-by="{{build_number}}" modified-by="b:4.10:06121401">
<cpu>Z8F6403</cpu>
<!-- file information -->
<files>
<file filter-key="">.\zsldevinit.asm</file>
<file filter-key="flash">..\..\..\nuttx.hex</file>
</files>
<!-- configuration information -->
<configurations>
<configuration name="Debug" >
<tools>
<tool name="Assembler">
<options>
<option name="define" type="string" change-action="assemble">_Z8F6403=1,_Z8ENCORE_640_FAMILY=1,_Z8ENCORE_F640X=1</option>
<option name="include" type="string" change-action="assemble"></option>
<option name="list" type="boolean" change-action="none">true</option>
<option name="listmac" type="boolean" change-action="none">false</option>
<option name="name" type="boolean" change-action="none">true</option>
<option name="pagelen" type="integer" change-action="none">56</option>
<option name="pagewidth" type="integer" change-action="none">80</option>
<option name="quiet" type="boolean" change-action="none">true</option>
<option name="revaa" type="boolean" change-action="rebuild">true</option>
<option name="sdiopt" type="boolean" change-action="assemble">true</option>
</options>
</tool>
<tool name="Compiler">
<options>
<option name="codegen" type="string" change-action="none">UserDefined</option>
<option name="const" type="string" change-action="compile">RAM</option>
<option name="define" type="string" change-action="compile">_Z8F6403,_Z16F_SERIES,_Z8ENCORE_640_FAMILY,_Z8ENCORE_F640X</option>
<option name="genprintf" type="boolean" change-action="compile">true</option>
<option name="keepasm" type="boolean" change-action="none">false</option>
<option name="keeplst" type="boolean" change-action="none">true</option>
<option name="list" type="boolean" change-action="none">false</option>
<option name="listinc" type="boolean" change-action="none">false</option>
<option name="model" type="string" change-action="compile">L</option>
<option name="optlink" type="boolean" change-action="compile">false</option>
<option name="promote" type="boolean" change-action="compile">true</option>
<option name="regvar" type="string" change-action="compile">Normal</option>
<option name="regvarcache" type="string" change-action="none">Normal</option>
<option name="reduceopt" type="boolean" change-action="compile">false</option>
<option name="stdinc" type="string" change-action="compile"></option>
<option name="usrinc" type="string" change-action="compile"></option>
<option name="watch" type="boolean" change-action="none">false</option>
</options>
</tool>
<tool name="Debugger">
<options>
<option name="target" type="string" change-action="rebuild">Z8ENCORE00ZC0</option>
<option name="debugtool" type="string" change-action="none">Simulator</option>
<option name="zemul_enableevents" type="boolean" change-action="none">false</option>
<option name="zemul_brkonfull" type="boolean" change-action="none">false</option>
<option name="usepageerase" type="boolean" change-action="none">true</option>
</options>
</tool>
<tool name="FlashProgrammer">
<options>
<option name="erasebeforeburn" type="boolean" change-action="none">false</option>
<option name="eraseinfopage" type="boolean" change-action="none">false</option>
<option name="offset" type="integer" change-action="none">0</option>
<option name="snenable" type="boolean" change-action="none">true</option>
<option name="sn" type="string" change-action="none">000000000000000000000000</option>
<option name="snsize" type="integer" change-action="none">1</option>
<option name="snstep" type="integer" change-action="none">000000000000000000000001</option>
<option name="snstepformat" type="integer" change-action="none">0</option>
<option name="snaddress" type="string" change-action="none">0</option>
<option name="snformat" type="integer" change-action="none">0</option>
<option name="snbigendian" type="boolean" change-action="none">true</option>
<option name="singleval" type="string" change-action="none">0</option>
<option name="singlevalformat" type="integer" change-action="none">0</option>
<option name="usenvds" type="boolean" change-action="none">false</option>
<option name="includeserial" type="boolean" change-action="none">false</option>
<option name="usepageerase" type="boolean" change-action="none">false</option>
</options>
</tool>
<tool name="General">
<options>
<option name="warn" type="boolean" change-action="none">true</option>
<option name="debug" type="boolean" change-action="assemble">true</option>
<option name="debugcache" type="boolean" change-action="none">true</option>
<option name="igcase" type="boolean" change-action="assemble">false</option>
<option name="outputdir" type="string" change-action="compile">.</option>
</options>
</tool>
<tool name="Librarian">
<options>
<option name="outfile" type="string" change-action="build">.\ostest.lib</option>
</options>
</tool>
<tool name="Linker">
<options>
<option name="createnew" type="boolean" change-action="build">false</option>
<option name="directives" type="string" change-action="build"></option>
<option name="edata" type="string" change-action="build">100-EFF</option>
<option name="exeform" type="string" change-action="build">OMF695,INTEL32</option>
<option name="flash" type="string" change-action="build">FF80-FFFF</option>
<option name="fplib" type="string" change-action="build">Dummy</option>
<option name="linkctlfile" type="string" change-action="build"></option>
<option name="map" type="boolean" change-action="none">true</option>
<option name="maxhexlen" type="integer" change-action="build">64</option>
<option name="nvds" type="string" change-action="build">0-f</option>
<option name="objlibmods" type="string" change-action="build"></option>
<option name="of" type="string" change-action="build">.\ostest</option>
<option name="padhex" type="boolean" change-action="build">false</option>
<option name="pram" type="string" change-action="build">0-f</option>
<option name="praminuse" type="boolean" change-action="build">false</option>
<option name="quiet" type="boolean" change-action="none">false</option>
<option name="rdata" type="string" change-action="build">20-FF</option>
<option name="relist" type="boolean" change-action="build">false</option>
<option name="rom" type="string" change-action="build">0-FFF</option>
<option name="sort" type="string" change-action="none">name</option>
<option name="startuptype" type="string" change-action="build">Standard</option>
<option name="startuplnkcmds" type="boolean" change-action="build">true</option>
<option name="undefisfatal" type="boolean" change-action="none">true</option>
<option name="useadddirectives" type="boolean" change-action="build">false</option>
<option name="usecrun" type="boolean" change-action="build">true</option>
<option name="warnisfatal" type="boolean" change-action="none">false</option>
<option name="warnoverlap" type="boolean" change-action="none">true</option>
<option name="xref" type="boolean" change-action="none">false</option>
</options>
</tool>
<tool name="Middleware">
<options>
<option name="usezsl" type="boolean" change-action="rebuild">true</option>
<option name="zslports" type="string" change-action="rebuild"></option>
<option name="zsluarts" type="string" change-action="rebuild"></option>
<option name="zslpramisrs" type="string" change-action="rebuild"></option>
</options>
</tool>
</tools>
</configuration>
<configuration name="Release" >
<tools>
<tool name="Assembler">
<options>
<option name="define" type="string" change-action="assemble">_Z8F6403=1,_Z16F_SERIES=1,_Z8ENCORE_640_FAMILY=1,_Z8ENCORE_F640X=1</option>
<option name="include" type="string" change-action="assemble"></option>
<option name="list" type="boolean" change-action="none">true</option>
<option name="listmac" type="boolean" change-action="none">false</option>
<option name="name" type="boolean" change-action="none">true</option>
<option name="pagelen" type="integer" change-action="none">56</option>
<option name="pagewidth" type="integer" change-action="none">80</option>
<option name="quiet" type="boolean" change-action="none">true</option>
<option name="revaa" type="boolean" change-action="rebuild">false</option>
<option name="sdiopt" type="boolean" change-action="assemble">true</option>
</options>
</tool>
<tool name="Compiler">
<options>
<option name="codegen" type="string" change-action="none">UserDefined</option>
<option name="const" type="string" change-action="compile">RAM</option>
<option name="define" type="string" change-action="compile">_Z8F6403,_Z16F_SERIES,_Z8ENCORE_640_FAMILY,_Z8ENCORE_F640X</option>
<option name="genprintf" type="boolean" change-action="compile">true</option>
<option name="keepasm" type="boolean" change-action="none">false</option>
<option name="keeplst" type="boolean" change-action="none">true</option>
<option name="list" type="boolean" change-action="none">false</option>
<option name="listinc" type="boolean" change-action="none">false</option>
<option name="model" type="string" change-action="compile">S</option>
<option name="optlink" type="boolean" change-action="compile">false</option>
<option name="promote" type="boolean" change-action="compile">true</option>
<option name="regvar" type="string" change-action="compile">Normal</option>
<option name="regvarcache" type="string" change-action="none">Normal</option>
<option name="reduceopt" type="boolean" change-action="compile">false</option>
<option name="stdinc" type="string" change-action="compile"></option>
<option name="usrinc" type="string" change-action="compile"></option>
<option name="watch" type="boolean" change-action="none">false</option>
</options>
</tool>
<tool name="Debugger">
<options>
<option name="target" type="string" change-action="rebuild"></option>
<option name="debugtool" type="string" change-action="none">Simulator</option>
<option name="zemul_enableevents" type="boolean" change-action="none">false</option>
<option name="zemul_brkonfull" type="boolean" change-action="none">false</option>
<option name="usepageerase" type="boolean" change-action="none">true</option>
</options>
</tool>
<tool name="FlashProgrammer">
<options>
<option name="erasebeforeburn" type="boolean" change-action="none">false</option>
<option name="eraseinfopage" type="boolean" change-action="none">false</option>
<option name="offset" type="integer" change-action="none">0</option>
<option name="snenable" type="boolean" change-action="none">false</option>
<option name="sn" type="string" change-action="none">0</option>
<option name="snsize" type="integer" change-action="none">0</option>
<option name="snstep" type="integer" change-action="none">1</option>
<option name="snstepformat" type="integer" change-action="none">0</option>
<option name="snaddress" type="string" change-action="none">0</option>
<option name="snformat" type="integer" change-action="none">0</option>
<option name="snbigendian" type="boolean" change-action="none">true</option>
<option name="singleval" type="string" change-action="none">0</option>
<option name="singlevalformat" type="integer" change-action="none">0</option>
<option name="usenvds" type="boolean" change-action="none">false</option>
<option name="includeserial" type="boolean" change-action="none">false</option>
<option name="usepageerase" type="boolean" change-action="none">false</option>
</options>
</tool>
<tool name="General">
<options>
<option name="warn" type="boolean" change-action="none">true</option>
<option name="debug" type="boolean" change-action="assemble">true</option>
<option name="debugcache" type="boolean" change-action="none">true</option>
<option name="igcase" type="boolean" change-action="assemble">false</option>
<option name="outputdir" type="string" change-action="compile">.</option>
</options>
</tool>
<tool name="Librarian">
<options>
<option name="outfile" type="string" change-action="build"></option>
</options>
</tool>
<tool name="Linker">
<options>
<option name="createnew" type="boolean" change-action="build">false</option>
<option name="directives" type="string" change-action="build"></option>
<option name="edata" type="string" change-action="build">100-EFF</option>
<option name="exeform" type="string" change-action="build">OMF695,INTEL32</option>
<option name="flash" type="string" change-action="build">FF80-FFFF</option>
<option name="fplib" type="string" change-action="build">Dummy</option>
<option name="linkctlfile" type="string" change-action="build"></option>
<option name="map" type="boolean" change-action="none">true</option>
<option name="maxhexlen" type="integer" change-action="build">64</option>
<option name="nvds" type="string" change-action="build">0-f</option>
<option name="objlibmods" type="string" change-action="build"></option>
<option name="of" type="string" change-action="build">.\ostest</option>
<option name="padhex" type="boolean" change-action="build">false</option>
<option name="pram" type="string" change-action="build">0-f</option>
<option name="praminuse" type="boolean" change-action="build">false</option>
<option name="quiet" type="boolean" change-action="none">false</option>
<option name="rdata" type="string" change-action="build">20-FF</option>
<option name="relist" type="boolean" change-action="build">false</option>
<option name="rom" type="string" change-action="build">0-FFF</option>
<option name="sort" type="string" change-action="none">name</option>
<option name="startuptype" type="string" change-action="build">Standard</option>
<option name="startuplnkcmds" type="boolean" change-action="build">true</option>
<option name="undefisfatal" type="boolean" change-action="none">true</option>
<option name="useadddirectives" type="boolean" change-action="build">false</option>
<option name="usecrun" type="boolean" change-action="build">true</option>
<option name="warnisfatal" type="boolean" change-action="none">false</option>
<option name="warnoverlap" type="boolean" change-action="none">true</option>
<option name="xref" type="boolean" change-action="none">false</option>
</options>
</tool>
<tool name="Middleware">
<options>
<option name="usezsl" type="boolean" change-action="rebuild">true</option>
<option name="zslports" type="string" change-action="rebuild"></option>
<option name="zsluarts" type="string" change-action="rebuild"></option>
<option name="zslpramisrs" type="string" change-action="rebuild"></option>
</options>
</tool>
</tools>
</configuration>
</configurations>
<!-- watch information -->
<watch-elements>
<watch-element expression="0x801d1a" />
</watch-elements>
<!-- breakpoint information -->
<breakpoints>
</breakpoints>
<!-- ice event information -->
<ice-events count="4" enable="0" breakOnFull="0">
<ice-event>
<data>000000000000</data>
<mask>000000000000</mask>
<action>0</action>
</ice-event>
<ice-event>
<data>000000000000</data>
<mask>000000000000</mask>
<action>0</action>
</ice-event>
<ice-event>
<data>000000000000</data>
<mask>000000000000</mask>
<action>0</action>
</ice-event>
<ice-event>
<data>000000000000</data>
<mask>000000000000</mask>
<action>0</action>
</ice-event>
</ice-events>
</project>
Reference in New Issue View Git Blame Copy Permalink