nuttx

History

Xiang Xiao 9097244cb8 build: Makefile should reference CONFIG_HOST_xxx instead to detect the host through uname Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>		2021-04-04 23:20:35 -07:00
..
configs/nsh	fs: delete NFILE_DESCRIPTORS for allocating dynamically	2021-03-17 06:46:42 -07:00
include	Refine the preprocessor conditional guard style (#190 )	2020-01-31 19:07:39 +01:00
scripts	build: Makefile should reference CONFIG_HOST_xxx	2021-04-04 23:20:35 -07:00
src	build: Remove the empty variable assignment	2020-05-24 08:24:13 -06:00
Kconfig
README.txt	Change all 'Nuttx' to 'NuttX'	2020-10-20 01:45:06 -07:00

README.txt

There's not much here:

EXT1 - P3 0:7 are used for LEDs.

UEXT pin 3/4 -TXD2/RXD2- is UART2.

The board I have has the revision '-' of LPC2378 even though I got the board
more than 2 years after the chip revision was released :-( .
I can't get NuttX to work if I fully enabled the MAM.

I used FTDI ft232 usb-serial with nsh piping as seen on the screenshot.