nuttx

History

Gregory Nutt 2eb4fe5ffb Make sure sections are aligned to 32-bits in all LD linker scripts. This fixes and issues noted specifically for the SAMD21 by Bernd Walter, but should be applicable to all other LD scripts as well. Squashed commit of the following: configs/: Add . = ALIGN(4); before every .data section configs/: Add . = ALIGN(4); before every ARM.extab section configs/: Add . = ALIGN(4); before every definition of __exidx_start configs/: Add . = ALIGN(4); before every .init_section. configs/: Convert TABs to spaces in all ld linker scripts. This just makes things easier to modify with scripts because the files are more consistent.		2019-05-30 16:51:38 -06:00
..
include
nsh	Squashed commit of the following:	2019-05-21 18:57:54 -06:00
scripts	Make sure sections are aligned to 32-bits in all LD linker scripts. This fixes and issues noted specifically for the SAMD21 by Bernd Walter, but should be applicable to all other LD scripts as well.	2019-05-30 16:51:38 -06:00
src
Kconfig
README.txt

README.txt

There's not much here:

EXT1 - P3 0:7 are used for LEDs.

UEXT pin 3/4 -TXD2/RXD2- is UART2.

The board I have has the revision '-' of LPC2378 even though I got the board
more than 2 years after the chip revision was released :-( .
I can't get Nuttx to work if I fully enabled the MAM.

I used FTDI ft232 usb-serial with nsh piping as seen on the screenshot.