077ef70b0c
* arch: cxd56xx: Add size limitation for I2C SCU xfer This is a fw restriction, unroll loop because it can be transfer up to 16 bytes. * arch: cxd56xx: Fix lack of leave_critical_section add the missing leave_critical_section * arch: cxd56xx: Remove unnecessary file this header is duplicate and we can remove it * arch: cxd56xx: Cosmetic change remove space after function * arch: cxd56xx: update topreg registers the topreg registers are updated to match the cxd5602 HW * arch: cxd56xx: Add voltage setting for low battery notification Add voltage setting for low battery notification * arch: cxd56xx: Improve perfomance of SD card Improve a problem that the clock of SD Host Controller is lower than the expected value in SDR25 transfer mode. * arch: cxd56xx: Cosmetic changes cleanup to comply with coding standard * boards: cxd56xx: Cosmetic changes updates to comply with coding standard * boards: cxd56xx: Fix SD card cannot mount issue SD card cannot mount when connecting and disconnecting three times or more due to wrong state of parameter 'initialized'. This change enables to skip swtching initialized state when mount failed.
234 lines
5.8 KiB
C
234 lines
5.8 KiB
C
/****************************************************************************
|
|
* arch/arm/include/cxd56xx/geofence.h
|
|
*
|
|
* Copyright 2018 Sony Semiconductor Solutions Corporation
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
*
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in
|
|
* the documentation and/or other materials provided with the
|
|
* distribution.
|
|
* 3. Neither the name of Sony Semiconductor Solutions Corporation nor
|
|
* the names of its contributors may be used to endorse or promote
|
|
* products derived from this software without specific prior written
|
|
* permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
|
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
|
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
|
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
|
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
|
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
|
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
* POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
****************************************************************************/
|
|
|
|
#ifndef __ARCH_ARM_INCLUDE_CXD56XX_GEOFENCE_H
|
|
#define __ARCH_ARM_INCLUDE_CXD56XX_GEOFENCE_H
|
|
|
|
#ifdef __cplusplus
|
|
#define EXTERN extern "C"
|
|
extern "C"
|
|
{
|
|
#else
|
|
#define EXTERN extern
|
|
#endif
|
|
|
|
/* Start geofence monitoring.
|
|
* This command is used to start the geofence monitoring.
|
|
*
|
|
* param arg
|
|
* Parameter is Unnecessary. Set Zero.
|
|
*/
|
|
|
|
#define CXD56_GEOFENCE_IOCTL_START 1
|
|
|
|
/* Stop geofence monitoring.
|
|
* This command is used to stop the geofence monitoring.
|
|
*
|
|
* param arg
|
|
* Parameter is Unnecessary. Set Zero.
|
|
*/
|
|
|
|
#define CXD56_GEOFENCE_IOCTL_STOP 2
|
|
|
|
/* Add region.
|
|
* This command is used to add the region.
|
|
*
|
|
* param arg
|
|
* Parameter is struct cxd56_geofence_region_s.
|
|
*/
|
|
|
|
#define CXD56_GEOFENCE_IOCTL_ADD 3
|
|
|
|
/* Modify region.
|
|
* This command is used to modify the region.
|
|
*
|
|
* param arg
|
|
* Parameter is struct cxd56_geofence_region_s.
|
|
*/
|
|
|
|
#define CXD56_GEOFENCE_IOCTL_MODIFY 4
|
|
|
|
/* Delete region.
|
|
* This command is used to delete the region.
|
|
*
|
|
* param arg
|
|
* Parameter is region id.
|
|
*/
|
|
|
|
#define CXD56_GEOFENCE_IOCTL_DELETE 5
|
|
|
|
/* Delete all region.
|
|
* This command is used to delete all region.
|
|
*
|
|
* param arg
|
|
* Parameter is Unnecessary. Set Zero.
|
|
*/
|
|
|
|
#define CXD56_GEOFENCE_IOCTL_ALL_DELETE 6
|
|
|
|
/* Get region data.
|
|
* This command is used to get region data.
|
|
*
|
|
* param arg
|
|
* Parameter is struct cxd56_geofence_region_s pointer
|
|
* Latitude and longitude and radius data of specified id is stored.
|
|
*/
|
|
|
|
#define CXD56_GEOFENCE_IOCTL_GET_REGION_DATA 7
|
|
|
|
/* Get used id.
|
|
* This command is used to get used region id.
|
|
*
|
|
* param arg
|
|
* Parameter is uint32_t data pointer.
|
|
* The used id is represented by bit field.
|
|
* For example, when ID0 and ID19 are used,
|
|
* since bit0 and bit19 are set, the return value is 0x00080001.
|
|
*/
|
|
|
|
#define CXD56_GEOFENCE_IOCTL_GET_USED_ID 8
|
|
|
|
/* Get all status.
|
|
* This command is used to get all region status.
|
|
*
|
|
* param arg
|
|
* Parameter is Unnecessary. Set Zero.
|
|
* All region status will stored in next read data.
|
|
*/
|
|
|
|
#define CXD56_GEOFENCE_IOCTL_GET_ALL_STATUS 9
|
|
|
|
/* Set goefence operation mode
|
|
* This command is used to set operation mode.
|
|
*
|
|
* param arg
|
|
* Parameter is struct cxd56_geofence_mode_s.
|
|
*/
|
|
|
|
#define CXD56_GEOFENCE_IOCTL_SET_MODE 10
|
|
|
|
/* check macros for GNSS commands */
|
|
|
|
#define CXD56_GEOFENCE_IOCTL_INVAL 0
|
|
#define CXD56_GEOFENCE_IOCTL_MAX 11
|
|
|
|
/* The transition type indicating that the user exits the region. */
|
|
|
|
#define CXD56_GEOFENCE_TRANSITION_EXIT 0
|
|
|
|
/* The transition type indicating that the user enters the region. */
|
|
|
|
#define CXD56_GEOFENCE_TRANSITION_ENTER 1
|
|
|
|
/* The transition type indicating that the user enters and
|
|
* dwells in region for a given period of time.
|
|
*/
|
|
|
|
#define CXD56_GEOFENCE_TRANSITION_DWELL 2
|
|
|
|
/* MAX number of region on the CXD56xx. */
|
|
|
|
#define CXD56_GEOFENCE_REGION_CAPACITY 20
|
|
|
|
/* Region center point and radius data
|
|
*
|
|
* The latitude and longtitude data format is
|
|
* integer value multiplied by 1000000.
|
|
* Example: When latitude is 35.123456, specify 35123456.
|
|
*/
|
|
|
|
struct cxd56_geofence_region_s
|
|
{
|
|
/* Region ID The range of ID is 0 to 19. */
|
|
|
|
uint8_t id;
|
|
|
|
/* Latitude (degree) of the center position of the region. */
|
|
|
|
long latitude;
|
|
|
|
/* Longitude (degree) of the center position of the region. */
|
|
|
|
long longitude;
|
|
|
|
/* Radius (m) of the region. */
|
|
|
|
uint16_t radius;
|
|
};
|
|
|
|
/* Geofence mode setting parameter */
|
|
|
|
struct cxd56_geofence_mode_s
|
|
{
|
|
uint16_t deadzone; /* dead zone [meter] */
|
|
uint16_t dwell_detecttime; /* Dewlling period time [sec] */
|
|
};
|
|
|
|
/* The transition data */
|
|
|
|
struct cxd56_geofence_trans_s
|
|
{
|
|
/* Region ID */
|
|
|
|
uint8_t id;
|
|
|
|
/* Transition status.
|
|
* The status is #CXD56_GEOFENCE_TRANSITION_EXIT or
|
|
* #CXD56_GEOFENCE_TRANSITION_ENTER or #CXD56_GEOFENCE_TRANSITION_DWELL.
|
|
*/
|
|
|
|
uint8_t status;
|
|
};
|
|
|
|
/* Geofence output data structer. */
|
|
|
|
struct cxd56_geofence_status_s
|
|
{
|
|
/* Updated region ID count */
|
|
|
|
uint8_t update;
|
|
|
|
/* The detail data od updated region ID */
|
|
|
|
struct cxd56_geofence_trans_s status[CXD56_GEOFENCE_REGION_CAPACITY];
|
|
};
|
|
|
|
#undef EXTERN
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
|
|
#endif /* __ARCH_ARM_INCLUDE_CXD56XX_GEOFENCE_H */
|