8983524a53
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@1664 42af7a65-404d-4744-a932-0658087f49c3
417 lines
15 KiB
Plaintext
417 lines
15 KiB
Plaintext
examples
|
|
^^^^^^^^
|
|
|
|
The examples directory contains several sample applications that
|
|
can be linked with nuttx. The specific example is selected in the
|
|
configs/<board-name>/defconfig file via the CONFIG_EXAMPLE setting.
|
|
For example,
|
|
|
|
CONFIG_EXAMPLE=ostest
|
|
|
|
Selects the examples/ostest example.
|
|
|
|
examples/dhcpd
|
|
^^^^^^^^^^^^^^
|
|
|
|
This examples builds a tiny DCHP server for the target system.
|
|
|
|
NOTE: For test purposes, this example can be built as a
|
|
host-based DHCPD server. This can be built as follows:
|
|
|
|
cd examples/dhcpd
|
|
make -f Makefile.host
|
|
|
|
Kernel configuratin settings:
|
|
|
|
CONFIG_EXAMPLE_DHCPD_NOMAC - (May be defined to use software assigned MAC)
|
|
CONFIG_EXAMPLE_DHCPD_IPADDR - Target IP address
|
|
CONFIG_EXAMPLE_DHCPD_DRIPADDR - Default router IP addess
|
|
CONFIG_EXAMPLE_DHCPD_NETMASK - Network mask
|
|
|
|
See also CONFIG_NETUTILS_DHCPD_* settings described elsewhere
|
|
and used in netutils/dhcpd/dhcpd.c. These settings are required
|
|
to described the behavior of the daemon.
|
|
|
|
examples/hello
|
|
^^^^^^^^^^^^^^
|
|
|
|
This is the mandatory, "Hello, World!!" example. It is little more
|
|
than examples/null with a single printf statement. Again useful only
|
|
for bringing up new NuttX architectures.
|
|
|
|
examples/mount
|
|
^^^^^^^^^^^^^^
|
|
|
|
This contains a simple test of filesystem mountpoints.
|
|
|
|
* CONFIG_EXAMPLES_MOUNT_DEVNAME
|
|
The name of the user-provided block device to mount.
|
|
If CONFIG_EXAMPLES_MOUNT_DEVNAME is not provided, then
|
|
a RAM disk will be configured.
|
|
|
|
* CONFIG_EXAMPLES_MOUNT_NSECTORS
|
|
The number of "sectors" in the RAM disk used when
|
|
CONFIG_EXAMPLES_MOUNT_DEVNAME is not defined.
|
|
|
|
* CONFIG_EXAMPLES_MOUNT_SECTORSIZE
|
|
The size of each sectors in the RAM disk used when
|
|
CONFIG_EXAMPLES_MOUNT_DEVNAME is not defined.
|
|
|
|
* CONFIG_EXAMPLES_MOUNT_RAMDEVNO
|
|
The RAM device minor number used to mount the RAM disk used
|
|
when CONFIG_EXAMPLES_MOUNT_DEVNAME is not defined. The
|
|
default is zero (meaning that "/dev/ram0" will be used).
|
|
|
|
examples/netttest
|
|
^^^^^^^^^^^^^^^^^
|
|
|
|
This is a simple network test for verifying client- and server-
|
|
functionality in a TCP/IP connection.
|
|
|
|
examples/nsh
|
|
^^^^^^^^^^^^
|
|
|
|
This directory contains the NuttShell (NSH). This is a simple
|
|
shell application. With some additional development, NSH will
|
|
someday be a great NuttX application debugger. NSH is described
|
|
in its own README located at examples/nsh/README.txt
|
|
|
|
examples/nx
|
|
^^^^^^^^^^^
|
|
|
|
This directory contains a simple test of a subset of the NX APIs
|
|
defined in include/nuttx/nx.h. The following configuration options
|
|
can be selected:
|
|
|
|
CONFIG_EXAMPLES_NX_VPLANE -- The plane to select from the frame-
|
|
buffer driver for use in the test. Default: 0
|
|
CONFIG_EXAMPLES_NX_BGCOLOR -- The color of the background. Default depends on
|
|
CONFIG_EXAMPLES_NX_BPP.
|
|
CONFIG_EXAMPLES_NX_COLOR1 -- The color of window 1. Default depends on
|
|
CONFIG_EXAMPLES_NX_BPP.
|
|
CONFIG_EXAMPLES_NX_COLOR2 -- The color of window 2. Default depends on
|
|
CONFIG_EXAMPLES_NX_BPP.
|
|
CONFIG_EXAMPLES_NX_TBCOLOR -- The color of the toolbar. Default depends on
|
|
CONFIG_EXAMPLES_NX_BPP.
|
|
CONFIG_EXAMPLES_NX_FONTCOLOR -- The color of the toolbar. Default depends on
|
|
CONFIG_EXAMPLES_NX_BPP.
|
|
CONFIG_EXAMPLES_NX_BPP -- Pixels per pixel to use. Valid options
|
|
include 2, 4, 8, 16, 24, and 32. Default is 32.
|
|
CONFIG_EXAMPLES_NX_RAWWINDOWS -- Use raw windows; Default is to
|
|
use pretty, framed NXTK windows with toolbars.
|
|
|
|
This test can be performed with either the single-user version of
|
|
NX or with the multiple user version of NX selected with CONFIG_NX_MULTIUSER.
|
|
If CONFIG_NX_MULTIUSER is defined, then the following configuration
|
|
options also apply:
|
|
|
|
CONFIG_EXAMPLES_NX_STACKSIZE -- The stacksize to use when creating
|
|
the NX server. Default 2048
|
|
CONFIG_EXAMPLES_NX_CLIENTPRIO -- The client priority. Default: 100
|
|
CONFIG_EXAMPLES_NX_SERVERPRIO -- The server priority. Default: 120
|
|
CONFIG_EXAMPLES_NX_LISTENERPRIO -- The priority of the event listener
|
|
thread. Default 80.
|
|
CONFIG_EXAMPLES_NX_NOTIFYSIGNO -- The signal number to use with
|
|
nx_eventnotify(). Default: 4
|
|
|
|
If CONFIG_NX_MULTIUSER is defined, then the example also expects the
|
|
following settings and will generate an error if they are not as expected:
|
|
|
|
CONFIG_DISABLE_MQUEUE=n
|
|
CONFIG_DISABLE_SIGNALS=n
|
|
CONFIG_DISABLE_PTHREAD=n
|
|
CONFIG_NX_BLOCKING=y
|
|
|
|
examples/null
|
|
^^^^^^^^^^^^^
|
|
|
|
This is the do nothing application. It is only used for bringing
|
|
up new NuttX architectures in the most minimal of environments.
|
|
|
|
examples/ostest
|
|
^^^^^^^^^^^^^^^
|
|
|
|
This is the NuttX 'qualification' suite. It attempts to exercise
|
|
a broad set of OS functionality. Its coverage is not very extensive
|
|
as of this writing, but it is used to qualify each NuttX release.
|
|
|
|
The behavior of the ostest can be modified with the following
|
|
settings in the configs/<board-name>/defconfig file:
|
|
|
|
* CONFIG_EXAMPLES_OSTEST_LOOPS
|
|
Used to control the number of executions of the test. If
|
|
undefined, the test executes one time. If defined to be
|
|
zero, the test runs forever.
|
|
* CONFIG_EXAMPLES_OSTEST_STACKSIZE
|
|
Used to create the ostest task. Default is 8192.
|
|
* CONFIG_EXAMPLES_OSTEST_NBARRIER_THREADS
|
|
Specifies the number of threads to create in the barrier
|
|
test. The default is 8 but a smaller number may be needed on
|
|
systems without sufficient memory to start so many threads.
|
|
|
|
examples/pashello
|
|
^^^^^^^^^^^^^^^^^
|
|
|
|
This is "Hello, World" implemented via the Pascal P-Code interpreter
|
|
|
|
examples/pipe
|
|
^^^^^^^^^^^^^
|
|
|
|
A test of the mkfifo() and pipe() APIs.
|
|
|
|
* CONFIG_EXAMPLES_PIPE_STACKSIZE
|
|
Sets the size of the stack to use when creating the child tasks.
|
|
The default size is 1024.
|
|
|
|
examples/poll
|
|
^^^^^^^^^^^^^
|
|
|
|
A test of the poll() and select() APIs using FIFOs and, if available,
|
|
stdin, and a TCP/IP socket. In order to build this test, you must the
|
|
following selected in your NuttX configuration file:
|
|
|
|
CONFIG_NFILE_DESCRIPTORS - Defined to be greater than 0
|
|
CONFIG_DISABLE_POLL - NOT defined
|
|
|
|
In order to use the TCP/IP select test, you have also the following
|
|
additional things selected in your NuttX configuration file:
|
|
|
|
CONFIG_NET - Defined for general network support
|
|
CONFIG_NET_TCP - Defined for TCP/IP support
|
|
CONFIG_NSOCKET_DESCRIPTORS - Defined to be greater than 0
|
|
CONFIG_NET_NTCP_READAHEAD_BUFFERS - Defined to be greater than zero
|
|
|
|
CONFIG_EXAMPLE_POLL_NOMAC - (May be defined to use software assigned MAC)
|
|
CONFIG_EXAMPLE_POLL_IPADDR - Target IP address
|
|
CONFIG_EXAMPLE_POLL_DRIPADDR - Default router IP addess
|
|
CONFIG_EXAMPLE_POLL_NETMASK - Network mask
|
|
|
|
In order to for select to work with incoming connections, you
|
|
must also select:
|
|
|
|
CONFIG_NET_TCPBACKLOG - Incoming connections pend in a backlog until accept() is called.
|
|
|
|
In additional to the target device-side example, there is also
|
|
a host-side application in this directory. It can be compiled under
|
|
Linux or Cygwin as follows:
|
|
|
|
cd examples/usbserial
|
|
make -f Makefile.host TOPDIR=../../. TARGETIP=<target-ip>
|
|
|
|
Where <target-ip> is the IP address of your target board.
|
|
|
|
This will generate a small program called 'host'. Usage:
|
|
|
|
1. Build the examples/poll target program with TCP/IP poll support
|
|
and start the target.
|
|
|
|
3. Then start the host application:
|
|
|
|
./host
|
|
|
|
The host and target will exchange are variety of small messages. Each
|
|
message sent from the host should cause the select to return in target.
|
|
The target example should read the small message and send it back to
|
|
the host. The host should then receive the echo'ed message.
|
|
|
|
examples/romfs
|
|
^^^^^^^^^^^^^^
|
|
|
|
This example exercises the romfs filesystem. Configuration options
|
|
include:
|
|
|
|
* CONFIG_EXAMPLES_ROMFS_RAMDEVNO
|
|
The minor device number to use for the ROM disk. The default is
|
|
1 (meaning /dev/ram1)
|
|
|
|
* CONFIG_EXAMPLES_ROMFS_SECTORSIZE
|
|
The ROM disk sector size to use. Default is 64.
|
|
|
|
* CONFIG_EXAMPLES_ROMFS_MOUNTPOINT
|
|
The location to mount the ROM disk. Deafault: "/usr/local/share"
|
|
|
|
examples/sendmail
|
|
^^^^^^^^^^^^^^^^^
|
|
|
|
This examples exercises the uIP SMTP logic by sending a test message
|
|
to a selected recipient. This test can also be built to execute on
|
|
the Cygwin/Linux host environment:
|
|
|
|
cd examples/sendmail
|
|
make -f Makefile.host
|
|
|
|
Settings unique to this example include:
|
|
|
|
CONFIG_EXAMPLE_SENDMAIL_NOMAC - May be defined to use software assigned MAC (optional)
|
|
CONFIG_EXAMPLE_SENDMAIL_IPADDR - Target IP address (required)
|
|
CONFIG_EXAMPLE_SENDMAIL_DRIPADDR - Default router IP addess (required)
|
|
CONFIG_EXAMPLE_SENDMAILT_NETMASK - Network mask (required)
|
|
CONFIG_EXAMPLE_SENDMAIL_RECIPIENT - The recipient of the email (required)
|
|
CONFIG_EXAMPLE_SENDMAIL_SENDER - Optional. Default: "nuttx-testing@example.com"
|
|
CONFIG_EXAMPLE_SENDMAIL_SUBJECT - Optional. Default: "Testing SMTP from NuttX"
|
|
CONFIG_EXAMPLE_SENDMAIL_BODY - Optional. Default: "Test message sent by NuttX"
|
|
|
|
NOTE: This test has not been verified on the NuttX target environment.
|
|
As of this writing, unit-tested in the Cygwin/Linux host environment.
|
|
|
|
NOTE 2: This sendmail example only works for the simplest of
|
|
environments. Virus protection software on your host may have
|
|
to be disabled to allow you to send messages. Only very open,
|
|
unprotected recipients can be used. Most will protect themselves
|
|
from this test email because it looks like SPAM.
|
|
|
|
examples/serloop
|
|
^^^^^^^^^^^^^^^^
|
|
|
|
This is a mindlessly simple loopback test on the console. Useful
|
|
for testing new serial drivers. Configuration options include:
|
|
|
|
* CONFIG_EXAMPLES_SERLOOP_BUFIO
|
|
Use C buffered I/O (getchar/putchar) vs. raw console I/O
|
|
(read/read).
|
|
|
|
examples/udp
|
|
^^^^^^^^^^^^
|
|
|
|
This is a simple network test for verifying client- and server-
|
|
functionality over UDP.
|
|
|
|
examples/uip
|
|
^^^^^^^^^^^^
|
|
|
|
This is a port of uIP tiny webserver example application. Settings
|
|
specific to this example include:
|
|
|
|
CONFIG_EXAMPLE_UIP_NOMAC - (May be defined to use software assigned MAC)
|
|
CONFIG_EXAMPLE_UIP_IPADDR - Target IP address
|
|
CONFIG_EXAMPLE_UIP_DRIPADDR - Default router IP addess
|
|
CONFIG_EXAMPLE_UIP_NETMASK - Network mask
|
|
CONFIG_EXAMPLE_UIP_DHCPC - Select to get IP address via DHCP
|
|
|
|
Other configuration items apply also to the selected webserver net utility.
|
|
Additional relevant settings for the uIP webserver net utility are:
|
|
|
|
CONFIG_NETUTILS_HTTPDSTACKSIZE
|
|
CONFIG_NETUTILS_HTTPDFILESTATS
|
|
CONFIG_NETUTILS_HTTPDNETSTATS
|
|
|
|
examples/usbserial
|
|
^^^^^^^^^^^^^^^^^^
|
|
|
|
This is another implementation of "Hello, World" but this one uses
|
|
a USB serial driver. Configuration options can be used to simply
|
|
the test. These options include:
|
|
|
|
CONFIG_EXAMPLES_USBSERIAL_INONLY
|
|
Only verify IN (device-to-host) data transfers. Default: both
|
|
CONFIG_EXAMPLES_USBSERIAL_OUTONLY
|
|
Only verify OUT (host-to-device) data transfers. Default: both
|
|
CONFIG_EXAMPLES_USBSERIAL_ONLYSMALL
|
|
Send only small, single packet messages. Default: Send large and small.
|
|
CONFIG_EXAMPLES_USBSERIAL_ONLYBIG
|
|
Send only large, multi-packet messages. Default: Send large and small.
|
|
|
|
In additional to the target device-side example, there is also
|
|
a host-side application in this directory. It can be compiled under
|
|
Linux or Cygwin as follows:
|
|
|
|
cd examples/usbserial
|
|
make -f Makefile.host TOPDIR=../../.
|
|
|
|
This will generate a small program called 'host'. Usage:
|
|
|
|
1. Build the examples/usbserial target program and start the target.
|
|
|
|
2. Wait a bit, then do enter:
|
|
|
|
dmesg
|
|
|
|
At the end of the dmesg output, you should see the the seria
|
|
device was successfully idenfied and assigned to a tty device,
|
|
probably /dev/ttyUSB0.
|
|
|
|
3. Then start the host application:
|
|
|
|
./host [<tty-dev>]
|
|
|
|
Where:
|
|
|
|
<tty-dev> is the USB TTY device to use. The default is /dev/ttyUSB0.
|
|
|
|
The host and target will exchange are variety of very small and very large
|
|
serial messages.
|
|
|
|
examples/usbstorage
|
|
^^^^^^^^^^^^^^^^^^^
|
|
|
|
This example registers a block device driver, then exports the block
|
|
the device using the USB storage class driver. Configuration options:
|
|
|
|
CONFIG_EXAMPLES_USBSTRG_NLUNS
|
|
Defines the number of logical units (LUNs) exported by the USB storage
|
|
driver. Each LUN corresponds to one exported block driver (or partition
|
|
of a block driver). May be 1, 2, or 3. Default is 1.
|
|
CONFIG_EXAMPLES_USBSTRG_DEVMINOR1
|
|
The minor device number of the block driver for the first LUN. For
|
|
example, N in /dev/mmcsdN. Used for registering the block driver. Default
|
|
is zero.
|
|
CONFIG_EXAMPLES_USBSTRG_DEVPATH1
|
|
The full path to the registered block driver. Default is "/dev/mmcsd0"
|
|
CONFIG_EXAMPLES_USBSTRG_DEVMINOR2 and CONFIG_EXAMPLES_USBSTRG_DEVPATH2
|
|
Similar parameters that would have to be provided if CONFIG_EXAMPLES_USBSTRG_NLUNS
|
|
is 2 or 3. No defaults.
|
|
CONFIG_EXAMPLES_USBSTRG_DEVMINOR3 and CONFIG_EXAMPLES_USBSTRG_DEVPATH3
|
|
Similar parameters that would have to be provided if CONFIG_EXAMPLES_USBSTRG_NLUNS
|
|
is 3. No defaults.
|
|
|
|
If CONFIG_USBDEV_TRACE is enabled (or CONFIG_DEBUG and CONFIG_DEBUG_USB), then
|
|
the example code will also manage the USB trace output. The amount of trace output
|
|
can be controlled using:
|
|
|
|
CONFIG_EXAMPLES_USBSTRG_TRACEINIT
|
|
Show initialization events
|
|
CONFIG_EXAMPLES_USBSTRG_TRACECLASS
|
|
Show class driver events
|
|
CONFIG_EXAMPLES_USBSTRG_TRACETRANSFERS
|
|
Show data transfer events
|
|
CONFIG_EXAMPLES_USBSTRG_TRACECONTROLLER
|
|
Show controller events
|
|
CONFIG_EXAMPLES_USBSTRG_TRACEINTERRUPTS
|
|
Show interrupt-related events.
|
|
|
|
Error results are always shown in the trace output
|
|
|
|
examples/wget
|
|
^^^^^^^^^^^^^
|
|
|
|
A simple web client example. It will obtain a file from a server using the HTTP
|
|
protocol. Settings unique to this example include:
|
|
|
|
CONFIG_EXAMPLE_WGET_URL - The URL of the file to get
|
|
CONFIG_EXAMPLE_WGET_NOMAC - (May be defined to use software assigned MAC)
|
|
CONFIG_EXAMPLE_WGET_IPADDR - Target IP address
|
|
CONFIG_EXAMPLE_WGET_DRIPADDR - Default router IP addess
|
|
CONFIG_EXAMPLE_WGET_NETMASK - Network mask
|
|
|
|
This example uses netutils/webclient. Additional configuration settings apply
|
|
to that code as follows (but built-in defaults are probably OK):
|
|
|
|
CONFIG_WEBCLIENT_GETMIMETYPE, CONFIG_WEBCLIENT_MAXHTTPLINE,
|
|
CONFIG_WEBCLIENT_MAXMIMESIZE, CONFIG_WEBCLIENT_MAXHOSTNAME,
|
|
CONFIG_WEBCLIENT_MAXFILENAME
|
|
|
|
Of course, the example also requires other settings including CONFIG_NET and
|
|
CONFIG_NET_TCP. The example also uses the uIP resolver which requires CONFIG_UDP.
|
|
|
|
WARNNG: As of this writing, wget is untested on the target platform. At present
|
|
it has been tested only in the host-based configuration described in the following
|
|
note. The primary difference is that the target version will rely on the also
|
|
untested uIP name resolver.
|
|
|
|
NOTE: For test purposes, this example can be built as a host-based wget function.
|
|
This can be built as follows:
|
|
|
|
cd examples/wget
|
|
make -f Makefile.host
|
|
|